Interior or Renovation works of Multipurpose Hall or Atrium at 11th Floor, CBI-HQ, CGO Complex, New Delhi - 110003

BILL OF QUANTITY

INTERIOR AND RENOVATION WORKS OF MULTIPURPOSE HALL/ATRIUM FOR CBI

(HEAD OFFICE), LODHI ROAD, NEW DELHI

DSR ITEMS NON-DSR ITEMS

SL.NO DESCRIPTION Amount (Rs.) Amount (Rs.)

A CEILING & ACOUSTIC WORKS ₹ 2,72,132.43 ₹ 40,51,214.96

B LIGHTING FIXTURES ₹ 14,23,274.48

C ELECTRICAL WORKS ₹ 7,86,192.00 ₹ 2,50,713.83

E HVAC WORKS ₹ 5,39,675.10

F LANDSCAPING ₹ 59,720.00

G Audio System ₹ 12,14,325.84

H FIRE ALARM ₹ 3,29,853.00

GRAND TOTAL (DSR- NON DSR) Inclusive of GST ₹ 93,22,485

GRAND TOTAL (DSR- NON DSR) Inclusive of GST ₹ 93,22,485

Digitally signed by ASHWANI

ASHWANI KUMAR BANSWAL

CEILING & ACOUSTIC WORKS

S.NO ITEM DESCRIPTION UNIT QTY. RATE AMOUNT (DSR) AMOUNT (NDSR)

1.00 NS 01 PERFORATED CALCIUM SILICATE FOR CEILING

Providing and fixing of Calcium silicate ceiling of tile 595 mm x 595 mm at all

height including providing and fixing of frame work made of special sections,

power pressed from M.S. sheets and galvanized with zinc coating of 120

gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of

size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200

mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5

mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the

angle hangers of 25x10x0.50 mm of required length with nuts & bolts of

required size and other end of angle hanger fixed with intermediate G.I.

channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre,

to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with

tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to

centre, shall be fixed in a direction perpendicular to G.I. intermediate channel

with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at

every junction, including fixing perimeter channels 0.5 mm thick 27 mm high

having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to

wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long

dry wall screws @ 230 mm interval, including fixing of calcium silicate

perforated board to ceiling section and perimeter channel with the help of dry

wall screws of size 3.5 x 25 mm at 230 mm c/c, , all as per manufacturer’s

specification and also including the cost of making openings for light fittings,

grills, diffusers, cutouts made with frame of perimeter channels suitably fixed,

all complete as per drawings, specification and direction of the Engineer in

Charge and including the cost of painting with 8 mm thick calcium silicate

perforated board.

2.00 NS 02 ACOUSTICAL MAGNESITE PINE WOOL TILE

Providing & Fixing of Magnesite pine wool tile made of mineral wood fibers

magnesite bonded having thickness of 15MM tile Suspended on 24 mm strong

Grid. The tiles should have Humidity Resistance (RH) of 90%, NRC 1.00, with

Fire Rating as per BS476 (Part 6 & 7) in module size of 595 X 595 X 15 mm@

400kg/m3 density. The tile should have color option as per architect/person in

charge. Tile would be backed with 50mm insulation@48kg density to achieve

desired level of acoustic. The grid should be 24 mm wide T sections i.e. the

Main Runner 3000mm in web height of 38 mm, 1200 mm & 600 mm Cross

Tees in web height of 26mm. Installation to comprise main runner spaced at

1200mm centres securely fixed to the structural soffit using suspension

system at 1200mm maximum centre. The First/Last suspension system at the

end of each main runner should not be greater than 450mm from the

adjacent wall. Flush fitting 1200mm long cross tees to be interlocked

between main runners at 600mm centre to form 1200 x 600 mm module. Cut

cross tees longer than 600mm require independent support. 600 x 600mm

module to be formed by fitting 600mm long flush fitting cross tees centrally

between the 1200 mm cross tees. Perimeter trim to be wall angles of size

3000x19x19mm, secured to walls at 450 mm maximum centres and as per

the drawing and the work complete in all respects to the satisfaction of

Engineer in-charge. All accessories consisting of HLC Sleeve Fasteners of

thread size 6.5mm x 25/5 with Soffit Cleat made of Galvanized steel of size

27 x 37 x 25 x 1.6mm and Level Clip in dimensions of 85x30x0.8mm with

4.00 mm GI wire

3.00 NS 03 BAFFLE CEILING

Providing & Installation of Baffle ceiling system comprises of 40 mm x 100

mm (40 mm width & 100 mm Height) U Shape panels of wood grain finish.

Panels shall be made of 0.5 mm thick galvanized steel Powder-coated and

length up to 3600 mm. Panel shall be high corrosion resistance and good color

stability. Centre to Centre panel gap will be 100 mm.Panels are fixed on to

roll formed carriers 32 mm wide x 42 mm deep out of 0.80 mm G.I sheet

Powder-coated color with cutouts to hold the panels in module of 50 mm at

maximum 1200 m c/c. Carriers are suspended from the roof or truss by 6 mm

dia. galvanized steel wire rod hanger with special height adjustment

suspension clip at max. 1200 mm c/c. Hangers are fixed to the roof by ‘J’

hooks or ceiling brackets and nylon inserts. Panels are factory cut in lengths

up to maximum 3.6 m to suit site dimensions or shop drawings. Top cap and

side cap are used to cover the edges of the panels. Sqm 130.00 8780 11,41,400.00

4.00 NS 04 FABRIC ACOUSTIC PANELS

Providing and fixing of fabric as per selection of approved color by

Architect/Client / Customer, on a perfectly leveled 12mm thickwater proof

marine plywood / MDF / Mineral fibre/ HDMR board. The system to be

installed on G.I studs 600x600mm centre to centre 2400mm X 50mm web

thickness 0.5mm, flanges 15 & 50mm fully knurled giving it high strength

With 120GSM zinc coating specially designed for Acoustic vibration

management and long life with a backing 50mm thick Rock wool @48kg

density insulation intact with chicken mess wires. 600x1200x15mm Magnesite

pine wool tile with NRC 0.9-1 to be mechanically fastened on the G.1 Studs.

Frame to be raised upto ceiling which is mounted on the RCC wall/any other

structure. The Rate includes the cost of 12mm thk water proof ply/ MDF /

Mineral fibre/ HDMR board.

5.00 DSR 9.42 PELMET PROVISION

Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3

layer or graded wood particle board medium density grade I, IS : 3087

marked, including top cover of 6 mm commercial ply wood conforming to IS:

303 BWR grade, nickel plated M.S. pipe 20 mm dia ( heavy type) curtain rod

with nickel plated brackets, including fixing with 25x3 mm M.S. flat 10 cm

long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40

mm on both inner side of pelmet and rawl plugs 75 mm long etc. all

complete. meter 110.00 511.55 56,270.50

6.00 NS 05 CURTAINS

MAIN CURTAIN (FABRIC)

supplying and fixing of high quality mix polyster suede/velvet 300 gsm fine

quality main curtain Main Faric composition:

100% polyster/ poly viscose/ - 300 gsm velvet Width 140 cms/ martindale

25000 / Pilling 4-5/ Color fastness Light 4-5.

BLACKOUT FABRIC:- 3 pass textured coated blackout- color- linen : 100%

polyster fabric/ 270 gsm/ width 140/ repeat- Nil/ only dry cleaning

HEAVY + BLACKOUT (STICHING)

3 pinch pleated main curtains with 4 inches hook tape at the top and

side weight at the bottom each

7.00 NS 06 CARPET FLOORING

Providing and installing wall to wall nylon 6.0 carpet of first grade. Yarn spec

is 100% nylon HS BCF Yarn, first grade, PHSBN 1100/68*2 DTEX Straight,

SEMI DULL 160TPM Final, 2 Twist. 100 % Eco Friendly/Azo free dyes used in

printing. Flammable pass as per 16CFR 1631 (FF-2-70):2010.Colour fastness

to washing and water,rubbing and lighting of 4 or more. Formaldehude

approved and organic volatile. Azo free . (Make : As per approved makelist)

Providing and applying first quality 8mm thick foam

F.R. Class -I underlay below the carpet as per direction of Engineer-in-

charge.(Make : As per approved makelist) SQM 5.00 150 750.00

8.00 NS 07 ALUMINIUM SKIRTING

Aluminium Skirting 100 mm ht

Providing and fixing Skirting - Groove skirting - Natural Anodized Finish(Make

: As per approved makelist)

PANELLING WORKS

9.00 NS 08 Wooden Panelling

Providing and installing 12 mm thick HDHMR (High Density High Moisture

Resistance Board) in required dimension of Max. size upto (2440 x 1200 mm

) having perforated of 10mm dia hole on back side covered with non-woven

acoustic fleece and face iof the board shall be laminated with microperforated

vinyl in approved shades/ colors (perforation area of board) > 14% (Make :

As per approved makelist)

10.00 NS 09 Fabric Panelling

Providing and fixing of fabric as per selection of approved color by

Architect/Client / Customer, on a perfectly leveled 12mm thickwater proof

marine plywood / MDF / Mineral fibre/ HDMR board. The system to be

installed on G.I studs 600x600mm centre to centre 2400mm X 50mm web

thickness 0.5mm, flanges 15 & 50mm fully knurled giving it high strength

With 120GSM zinc coating specially designed for Acoustic vibration

management and long life with a backing 50mm thick Rock wool @48kg

density insulation intact with chicken mess wires. 600x1200x15mm Magnesite

pine wool tile with NRC 0.9-1 to be mechanically fastened on the G.1 Studs.

Frame to be raised upto ceiling which is mounted on the RCC wall/any other

structure. The Rate includes the cost of 12mm thk water proof ply/ MDF /

Mineral fibre/ HDMR board.

11.00 NS 10 ACCOUSTICAL DOORS

Supply ,Making and installation of Accoustical Auditorium Door 60 mm thick

made of double layer 12 mm thick multilayer ply and middle layer of frame

work of 35 mm thick sal wood frame and 25 mm thick glass wool insulation

.Both surface shall be laminated with Matrix/Equivalent make laminated on

0.8 mm thickness and having beading all around of teak wood .The door shall

be mounted on floor spring (excluding cost of floor spring) complete with all

respect and labour.

12.00 NS 11 WOODEN FLOORING ON STAGE

Providing & fixing in position Strandwoven Bamboowood flooring of solid

structure with planks of sizes 14mm thick, 1800mm length (minimum) and

125 mm wide(minimum), in approved colour, texture and finish,

having Performance Appraisal Certificate (PAC) issued by Building Materials

& Technology Promotion Council (BMTPC). The flooring shall be fixed with

tongue and groove interlocking system, with underlayment of 4mm thick

expanded polyethylene foam sheets having density 40kg/cum, over prepared

surface with necessary quarter round planks of size 1900mm x 18mm and

door reducer of size 1900mm x 44mm, wherever required. The bamboowood

planks shall have minimum density of 1000 Kg/cum & minimum Hardness

1000 Kgf. with Eco friendly UV coating, all complete as per direction of the

Engineer in-charge.(Make : As per approved makelist)

13.00 NS 12 Podium (600x450x1050mm) :

Supplying, and placing in position of factory made 25mm PLPB structure

constructed in 25mm thick PLPB board with 2mm thick PVCedge banding

finish as per approved 1mm laminate color as per detailed drawing from

The work shall be carried out under the guidance and instructions from

14.00 NS 13 Metal Frame

Providing, Fabricating, Assembling, painting, hoisting, erecting and placing in

position MS Built-up section/Tubular Structure ( MS built-up section :-Rolled

section & plates confirming to IS 2062 minimum required grade E250,Tubular

Structure:- made from Steel hollow sections, ISI marked from SAIL / RINL /

TATA/JINDAL/APPOLO, conforming to IS 1161/4923/1239, minimum required

Grade YST 240, in the profile shape as per drawings with special plate

connector, pinion joints, Plates, hollow sections etc. using water jet 3-D

cutting system for obtaining smooth 3-dimensional curvature,

SAW/MMAW/MIG welding process with special plate connectors, pinion joints,

plates, hollow sections to all heights, tools and plants and necessary

scaffoldings etc. required for all operations involved. The structural members

shall be painted with 280 DFT anticorrosive protection coating using

Paint/Primer of approved make with first coat of Epoxy Primer 50 microns

thick, second coat with MIO minimum 150 microns thick and final coat of

polyurethane paint 80 microns thick (to be applied in 2 coats) which first coat

shall be at ground and second coat after erection including touch up of

damaged area of already painted surfaces if any, up to all heights including

preparation of the surface by copper slag blasting before application of

primer/paint as per SA2.5 standard.

The item shall be executed as per approved drawings and direction of the

Engineer-in-Charge complete. (Note: The work shall be executed as per

manufacturer’s specifications wherever applicable, relevant code of practice

and sound engineering practice.)

15.00 DSR 6.13 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of

class designation 7.5 in superstructure above plinth level up to floor V level.

DSR 6.13.2 Cement mortar 1:4 (1 cement : 4 coarse sand)

16.00 DISMANTLING WORK

Demolishing cement concrete manually/ by mechanical means including

DSR 15.2 disposal of material within 50 metres lead as per direction of Engineer - in

DSR 15.2.1 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) cum 12 2,007.10 24085.20

Demolishing brick work manually/ by mechanical means including stacking of

DSR 15.7 serviceable material and disposal of unserviceable material within 50 metres

lead as per direction of Engineer-in-charge.

DSR 15.7.4 In cement mortar cum 20 1,698.45 33969.00

Dismantling doors, windows and clerestory windows (steel or wood) shutter

DSR 15.12 including chowkhats, architrave, holdfasts etc. complete and stacking within

50 metres lead :

DSR 15.12.1 Of area 3 sq. metres and below each 10 157.85 1578.50

Taking out doors, windows and clerestory window shutters (steel or wood)

including stacking within 50 metres lead :

DSR 15.13.1 Of area 3 sq. metres and below each 10 118.30 1183.00

Dismantling steel work in single sections including dismembering and stacking

within 50 metres lead in:

Dismantling tile work in floors and roofs laid in cement mortar including

stacking material within 50 metres lead.

DSR 15.23.1 For thickness of tiles 10 mm to 25 mm sqm 52 60.50 3146.00

Dismantling stone slab flooring laid in cement mortar including stacking of

DSR 15.25 serviceable material and disposal of unserviceable material within 50 metres sqm 20 219.75

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including

DSR 15.52 stacking of useful materials near the site and disposal of unserviceable each 10 744.60

materials within 50 metres lead. 7446.00

Disposal of building rubbish / malba / similar unserviceable, dismantled or

waste materials by mechanical means, including loading, transporting,

DSR 15.60 unloading to approved municipal dumping ground or as approved by Engineer- cum 50 219.35

in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

17.00 Providing and fixing Fire Extinguishers (ABC & Co2 Type ) complete with all

accessories as per manufacturers specifications.

i) NS Capacity 4 Kg (Co2 Type) Each 3 8,220.00 24,660.00

ii) NS Capacity 6 Kg (ABC Type) Each 1 3,388.00 3,388.00

iii) NS Capacity 9 Kg(ABC Type) Each 1 4,800.00 4,800.00

Providing, fixing, testing & commissioning of 15mm dia

18.00 21 quartzoid bulb type sprinklers of rating 68 degree centigrade with required

21.1/2 Pendent/ Upright sprinkler Each 45 484.00 21780

Supplying, installation, testing & commissioning of

sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on

reducer thread with maximum working pressure of 175 PSI test pressure of

19.00 25.4 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler Each 50 1,795.00 89750

head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets,

center bracket, stockbar of following sizes complete as required.

TOTAL (Carried Over to the Summary) ₹ 2,72,132.43 ₹ 40,51,214.96

ELECTRICAL FIXTURES

Image Description Watt Led clr Qty Unit Rate Amount

Supply and Commissioning of Round adjustable

recessed LED Downlighter EVO90 fitting for false

ceiling installation.

( Avalaible Beam Angle 24°,36°,45°. Life time

50.000h . Body in die-cast aluminium. Anti-glare

Accessory Honeycomb Mesh . 220-240V -

50/60Hz Non-Dimmable Power supply + Power

Supply and Commissioning of Angled aluminium

profile for Ra90 10W/MTR 2835 3000K LED

STRIP 3 SDCM with diffuser of 2m. Light

2 emission at 45°. Fixing clips (4 pcs) and end - - 102 mtr 1,658.00 1,69,116.00

caps (4 pcs) included. W = Silver painted

Supply and Commissioning of Power Supply Non-

Supply and Commissioning of Linear aluminium

profile for Ra90 13W/ft 52i 4000K LED STRIP 3

SDCM with diffuser of 4 feet Length. Light

emission Diffused. Fixing clips and end caps

included. W = Silver painted aluminium.

(4feet x 36 nos)

Supply and Commissioning of Power Supply

Phase Cut Dimmable

6 Supply and Commissioning of Dimmers - - 6 nos 4,642.58 27,855.45

ELECTRICAL WORKS

DSR Amount in Rs. Amount in Rs.

2018 Description Unit Qty. Rate (Schedule (Non- Schedule

Item No. Items) Items)

INTERNAL ELECTRICAL WORK

1.0 1 SUB HEAD-I: WIRING & SUBMAIN

1.0 1.10 Wiring for light point/ fan point/ exhaust fan point/ call bell point with

1.5 sq.mm FRLS PVC insulated copper conductor single core cable in

surface / recessed medium class PVC conduit, with modular switch,

modular plate, suitable GI box and earthing the point with 1.5 sq.mm.

FRLS PVC insulated copper conductor single core cable etc as required.

2.0 Wiring for group controlled (looped) light point/fan point/exhaust

fan point/ call bell point (without independent switch etc.) with

1.5 sq. mm FRLS PVC insulated copper conductor single core

cable in surface/ recessed steel conduit, and earthing the point

with 1.5 sq. mm FRLS PVC insulated copper conductor single

core cable etc. as required.

3.0 1.14 Wiring for circuit/ submain wiring alongwith earth wire with the following

sizes of FRLS PVC insulated copper conductor, single core cable in

surface/ recessed medium class PVC conduit as required.

3.2 1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Metre 750 200 150000

3.4 1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 50 249 12450

3.5 1.14.5 2 X 10 sq. mm + 1 X 6 sq. mm earth wire Metre 2 328 656

3.6 1.14.8 4 X 4 sq. mm + 2 X 4 sq. mm earth wire Metre 2 308 616

3.7 1.14.9 4 X 6 sq. mm + 2 X 6 sq. mm earth wire Metre 100 394 39400

3.8 1.14.10 4 X 10 sq. mm + 2 X 6 sq. mm earth wire Metre 2 543 1086

3.9 1.14.11 4 X 16 sq. mm + 2 X 6 sq. mm earth wire Metre 2 772 1544

4.0 1.56 Supplying and fixing suitable size GI box with modular plate and cover

in front on surface or in recess, including providng and fixing 2 nos. 3

pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch,

connections etc. as required. (For light plugs to be used in non

residential buildings). Each 2 582 1164

5.0 1.31 Supplying and fixing suitable size GI box with modular plate and

cover in front on surface or in recess, including providing and fixing 3

pin 5/6 amps modular socket outlet and 5/6 amps modular

switch, connection etc. as required. (For light plugs to be used in non

residential buildings). Each 50 401 20050

6.0 1.32 Supplying and fixing suitable size GI box with modular plate and

cover in front on surface or in recess, including providing and fixing 6

pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps

modular switch, connection etc. as required. Each 20 495 9900

7.0 1.33 Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction

box/ wooden block including connection etc as required. Each RO 65

Item as stated above Rs.

Total of Sub-Head - I carried to summary sheet 597666 0

2 SUB HEAD -II: DISTRIBUTION BOARD

1.0 Supplying and fixing following way, single pole and neutral,

sheet steel, MCB distribution board, 240 V, on surface/ recess,

2.3 complete with tinned copper bus bar, neutral bus bar, earth

bar, din bar, interconnections, powder painted including

earthing etc. as required. (But without MCB/RCCB/Isolator)

1.1 2.3.1 6way , Double door Each 2 1661 3322

2.0 2.4 Supplying and fixing following way, horizontal type three pole and

neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess,

complete with tinned copper bus bar, neutral bus bar, earth bar, din bar,

interconnections, powder painted including earthing etc. as required.

(But without MCB/RCCB/ Isolator)

3.0 2.5 Supplying and fixing of following ways surface/ recess

mounting, vertical type, 415 V, TPN MCB distribution board of

sheet steel, dust protected, duly powder painted, inclusive of

200 A tinned copper bus bar, common neutral link, earth bar,

din bar for mounting MCBs (but without MCBs and incomer ) as

required . (Note : Vertical type MCB TPDB is normally used

where 3 phase outlets are required.)

4.0 2.10 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C"

curve, miniature circuit breaker suitable for inductive load of following

poles in the existing MCB DB complete with connections, testing and

commissioning etc. as required.

4.2 2.10.4 Triple pole Each 8 826 6608

5.0 2.11 Supplying and fixing single pole blanking plate in the existing MCB DB

complete etc. as required. Each 2 8 16

6.0 NS Supplying and fixing following rating, four pole, 415 volts, MCB in the

existing MCB DB complete with connections, testing and commissioning

etc. as required.

7.0 2.14 Supplying and fixing following rating, double pole, (single phase and

neutral), 240 volts, residual current circuit breaker (RCCB), having a

sensitivity current upto 300 milliamperes in the existing MCB DB

complete with connections, testing and commissioning etc. as required.

Total of Sub-Head - II Carried to summary sheet 107774 17300

DSR Amount in Rs. Amount in Rs.

2018 Description Unit Qty. Rate (Schedule (Non- Schedule

Item No. Items) Items)

Sub-Head - III: LIGHTING FIXTURES AND FAN

DSR-1 Supply, Installation, Testing and Commissioning of 1200 mm sweep,

BEE 5 star BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC)

rated Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos.

Ceiling fan canopies, shackle kit, safety rope, copper winding, Power Factor not less

with than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum

Brush 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than Each 5 2688.00 13440.00

Less 10%, remote or electronic regulator unit for speed control and all

Direct remaining accessories including safety pin, nut bolts, washers,

Current temperature rise=75 degree C (max.), insulation resistance more than 2

(BLDC) mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing

1 motor etc. complete as required.

Erection of Fixtures:

Installation, testing and commissioning of wall bracket /ceiling

2 1.35 fittings of all sizes and shapes containing upto two GLS/CFL/ Each 98.00 25970.00

LED lamps per fitting, complete with all accessories including

connections etc. as required. 265

Installation, testing and commissioning of ceiling fan, including

wiring the down rods of standard length (upto 30 cm) with 1.5

3 1.45 sq. mm FRLS PVC insulated, copper conductor, single core cable, Each RO 203.00

including providing and fixing phenolic laminated sheet cover

on the fan box etc. as required.

Installation of exhaust fan in the existing opening, including

4 1.50 making good the damage, connection, testing, commissioning

etc. as required. RO

5.1 1.50.1 Upto 450 mm sweep Each RO 363.00

Item as stated above Rs. 39410.00 0.00

6 SUB HEAD-IV :EARTHING SYSTEM

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick

1 5.4 including accessories, and providing masonry enclosure with Set 6216.00 12432.00

cover plate having locking arrangement and watering pipe of

2.7 meter long etc. with charcoal/ coke and salt as required. 2

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I.

2 5.11 pipe from earth electrode including connection with G.I. nut, bolt, RM 14490.00

spring, washer excavation and re-filling etc. as required. 30 483

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in

recess for connections etc. as required 70 206

Total of Sub-Head - VIII carried to summary sheet 41,342.00 -

7 SUB HEAD-V : Raceway

Supplying and installation of following sizes 1.6 mm thick GI Raceways

in recess/ on surface including chasing the wall/floor complete as

M Trak 300x38x1.6 - 3 Com 2mm Thick Lid and Base

1.1 NS 1.6mm Mtr.

"M Trak 150x38x1.6 - 2 Com 2mm Thick Lid and

1.2 NS Base 1.6 mm Mtr.

"M Trak 75x38x1.6 - 2 Com 2mm Thick Lid and

1.3 NS Base 1.6 mm Mtr.

Supplying and installation of following sizes Joint sleeves in recess/ on

2 surface including chasing the wall/floor complete as required.

2.1 NS Joint Sleeve - UMDX30036 EACH 8 228.00 1,824.00

2.2 NS Joint Sleeve - UMDX25036 EACH 8 209.00 1,672.00

Total of Sub-Head - V carried to summary sheet - 2,33,413.83

S.N Description Qty Unit Unit price Amount

Profeesional Loudspeakers

Supply Installation Testing & Commissioning of 15" Two-Way System in

a Trapezoidal Enclosure; 500W @ 8 ohm Continues Power, 1.5KW

1 program, Frequency 40Hz to 20KHz sensitivity 105dB 1W/1M, SPL 1 Nos 140812 140812

135dB, Coverager: 80(V)& 60(H) with 2.95"Compressed treble unit x 1.

Approved Make : Bose/Heinrich/Martin Audio

Supply Installation Testing & Commissioning of 60 W Pendant type

Loudspeaker with 360-degree sound wide dispersion angle

having 6” full range speaker driver, Power taps at 7.5w-10w-15w-20w-

30w-60w @100V, ABS enclosure of black color

With security ring lock to prevent from drop.

Appoved Make : Bose/Heinrich/Bittner

Supply Installation Testing & Commissioning of 1 x 12" Bass reflex

Subwoofer system with 400 watt or better Frequency response 35-

200HZ r, Sensitivity 97dB 1W/1M.

Approved Make : Bose/Heinrich/Martin Audio

Power Amplifier

Supply Installation Testing & Commissioning of Power amplifier, Dual

channel 1600 + 1600 Watts RMS @ 8 ohms & 2 x 3000 watts RMS @

4ohms,Sterio power THD<0.1%, S/N Ratio 112dB Front-to-rear air ow,

4 temperature controlled speed, Short circuit,open circuit,direct 1 Nos 217679.6 217680

voltage,high temperature, radiofrequency, ultralow frequency, current

peak limitery input connector 3-pin XLR, electronically balanced.

Approved Make : Lapp/Heinrich/Bittner

Supply Installation Testing & Commissioning of 250W RMS Dual Channel

Class-D Digital Power Amplifier with Switch power technology for power

electricity saving. Amplifier shall have Following Features: 250W RMS

per Channel, Amplifier Output 100V, Short Circuit, Power, Tempreature,

Overload Protection, Auto Cooling Fans. THD <0.1%, Frequency

Response 20Hz - 20kHz, AC & DC Fuse, SNR >80dB.

Digital Signal Processor

Supply Installation Testing & Commissioning of 8-channel Phantom

Power Microphone/Line input, 8- channel circuit Output; Loudspeaker

Management System Frequency Response 20Hz ~ 20KHz, THD

<0.003%, Channel Seperation >92dB,Seperate Mute Control each

channel,CMRR>80dB, 8 independent parametric EQ, adjustable gain

6 range up to 20dB, With, RS232 and internet to connect PC,High-speed 1 Nos 226352 226352

processing DSP Chip, the new generation of AFC algorithm to eliminate

the feedback faster and make system more stable.Application includes

Auto Mixer (Limiter threshold and Gain), Routing, Audio Processing and

special signal extension Processing.

Approved Make : Aties/Bose/Heinrich

Supply Installation Testing & Commissioning of 24 channels Mixing

console with Mono Input 16 Channel, Stereo Input 4 group, Mono

Insertion Channel 16 Channel, output channel 3 main output; 4 output

group; 2 CH aux output; 2 CH CD/TAPE

7 auxiliary output; 2 CH effect output Phantom power 48V, Frequency 1 Nos 138443.2 138443

Response 20Hz - 20kHz, Channel Crosstalk less than 90dB, S/N Ratio 83

dB, Gain difference between Channel less than 2 dB, Distortion degree

less than 0.02%, 21 Kind of DSP Effects.

Approved Make : Yamaha/Heinrich/Bose

Supply Installation Testing & Commissioning of Dynamic Vocal

8 Microphone with cardioid polar pattern, frequency response 70Hz - 1 Nos 19082 19082

20kHz (@ 1 cm: 20Hz - 18kHz), THD 147/156 dB,Impedence <=600

Supply, Installation,Testing & Commissioning of handheld Wireless Mic

system set with two transmitters dynamic microphone, Frequency

Response 40Hz-15,000 Hz, Surge mode PLL Phase lock, Dynamic Range

9 >90dB, THD < 0.5%, S/N ratio > 90dB, Carrier frequency range 720 - 1 Nos 60022.76 60023

830 MHz, Power Consumption < 85mA. -

Supply, Installation,Testing & Commissioning of Lapel Wireless Mic

system set with two transmitters dynamic microphone, Frequency

Response 40Hz-15,000 Hz, Surge mode PLL Phase lock, Dynamic Range

10 >90dB, THD < 0.5%, S/N ratio > 90dB, Carrier frequency range 720 - 1 Nos 60022.76 60023

830 MHz, Power Consumption < 85mA. - .

Approved Make : Shure/Sheinnisure/Heinrich

Supply, fitting, fixing & testing of Podium with Following features

It includes a built-in amplifier and speaker. A flexible gooseneck

microphone and light are provided as well.

• Anumber of input and output connections make it easy to expand its

capacity. Available in black finish.

• Built-in GOW amplifier, one tweeter and three 5 " woo-fers and built-in

• Flexible goose neck MICs and lamp.

• Two MICs inputs, one line input and four AUX inputs.

• With two UHF handholds wireless MICs, maximum range 100 Meters.

• Finish: Black

• GOW rated power output.

• MIC length: 57cm; Lamp length: 45cm.

• Wooden top and steel bottom, steel body.

Approved Make : Shure/Sheinnisure/Heinrich

18-11-2021 RENOVATION AND RESTORATION WORKS AT IIPA, DELHI

S.NO ITEM UNIT QTY. RATE AMOUNT

1 INDOOR LANDSCAPING-

Plant Option- AGLOMINA

Plant Size - Medium

(Make : As per approved makelist)

2 INDOOR/OUTDOOR POTS/PLANTERS

A commercial quality polymer resin, UV stabilized and

nonfading round planters.Can be used for both outdoor &

indoor. (texture,Shade/ Color as per selection). R1213/ 20 Ltr.

32 (D1) X 33(H). (Make : As per approved makelist)

Hand textured 100% recyclable rectilinear polymer planters.

Seemless with no joints, no paneling, no fading &

homogeneous. (texture,Shade/ Color as per selection). Size

(90x40 cms). (Make : As per approved makelist)

TOTAL 59,720.00

RO Page 9 of 13

SCHEDULE OF QUANTITIES FOR SUPPLYING, INSTALLATION, TESTING & COMMISSIONING OF STRUCTURE CABLINGLAN,Wi-Fi & LAN

SYSTEM FOR CBI HEAD OFFICE.

DSR 2021 Total Rate Amount N DSR

S. No Description of Item Unit Amount DSR

No. Qty (Rs.) (Rs.)

SECTION - I- STRUCTURED CABLING SYSTEM PASSIVE

Supply , Installtion , Testing and Comissioning of

1 MR-1 armoured 6 core Single mode OFC cable for interfloor Mtr 250 127.84 31,958.78

switches connectivity

Supply , Installtion , Testing and Comissioning of 6 Port

2 MR-2 LIU Singlemode OFC cable for switches connectivity. Nos. 2 9,212.00 18,424.00

Supply , Installtion , Testing and Comissioning of 3 Feet

3 MR-3 Optical Fiber Patchcord. Nos. 2 2,209.00 4,418.01

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in

1.53.1 the existing surface/ recessed Steel/ PVC conduit as Mtr 600 49.00 29,400.00

Supply , Installtion , Testing and Comissioning of CAT6

information outlet (I/O).

Supply , Installtion , Testing and Comissioning of loaded

24 port CAT6 jack panel for CAT6 cable termination at

Supply , Installtion , Testing and Comissioning of CAT6

7 MR-6 patch cord 3 feet for rack side switch to jack panel Nos. 50 249.10 12,454.79

Supply , Installtion , Testing and Comissioning of CAT6

patch cord 7 feet for information outlet (I/O) to end user

device connectivity.

Supply , Installtion , Testing and Comissioning of 1, 2 and

9 MR-8 4 port face plate white for I/O fixing at user side. Nos. 50 84.60 4,230.06

Supply , Installtion , Testing and Comissioning of 15U

(600W/500D) Wall mount rack with fans , 2 cable

managers , 2 Nos. of hardware pkts.

Supply, Installation, Testing and Commisioning of HDMI

Cable (18G, HDR10, UHD/4K, VW1, 28AWG)

Supply Installation Testing & Commissioning of Wiring for

Speaker 2x1.5sqmm sheilded cable system including

miscellaneous connectors in PVC conduits. .

Approved Make : Polycab/Belden/RR

Supply and fixing 2C x 1.5 Sq.mm sheilded Microphone

Approved Make : Polycab/Belden/RR

Supply and fixing Connector required to complete the Job.

SITC of 19-inch Equipment Rack with standardized frame

or enclosure for mounting multiple PA controllers, CD

player, FM sources, Amplifiers etc modules. Size 24U.

Approved Make : APC/Rittel/Heinrich

Total DSR + NDSR 29,400.00 3,65,983.39

Sr No Description Unit Quantity Unit Rate Amount

Supplying, laying, fixing, testing & commissioning MS class `C' pipes confirming to

IS 1239/3589, cut to required length with necessary insulation, clamps, supports,

1.2 antivibration, hangers, fittings such as bends, tees, reducers etc and installed with

all welded joints complete to suit change in location of chilled water AHUs as per

design requirement

Supply, fabrication, erection and commissioning of factory fabricated rectangular

ducts using G.I Sheets.The price shall include TDF flanges, turning vanes,

supports, sealent (neoprene gasket), hangers, access door etc.

24 gauge galvanized sheet steel (0.63mm) Sqmt 100 914.895 91489.5

22 gauge galvanized sheet steel (0.80mm) Sqmt 50 1061.73 53086.5

20 gauge galvanized sheet steel (1.00mm) Sqmt 10 1174.68 11746.8

Supply, installation, testing and balancing of square/ rectangular extruded

3 aluminium powder coated diffusers for Supply air required as per the approved

shop drawings. Diffuser shall be with spring loaded removable core type

distribution grid , aluminium key operated volume control dampers Sqmt 1 9487.8 9487.8

Supply, installation, testing and balancing of square/ rectangular extruded

aluminium powder coated diffusers for Return air required as per the approved

shop drawings. Diffuser shall be with spring loaded removable core type

distribution grid, without dampers Sqmt 1 7228.8 7228.8

Supply,installation,testing & balancing of continuous linear fixed bar extruded

aluminium powder coated air grilles for Supply Air with normal flow 15° one

way/two way deflection with all sides flanged with aluminium key operated

dampers Sqmt 4.5 8358.3 37612.35

Supply,installation,testing & balancing of continuous linear fixed bar extruded

aluminium powder coated air grilles for Return Air with normal flow 15° one

way/two way deflection with all sides flanged without dampers Sqmt 2.5 7228.8 18072

Supply and installation of following thickness duly laminated aluminum foil of mat

finish closed cell Nitrile rubber (Class “O”) insulation on ducting after

7 applying suitable adhesive for Nitrile rubber. The joints shall be sealed with 50 mm

wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per

specifications and as required.

Supply and installation of duct acoustic insulation. Material shall be open cell nitrile

8 rubber based 10 mm thick with 140-180 Kg/m3 density, Fire Grade Class O and all

accessories as per specification. Sqmt 22.5 768.06 17281.35

9 Civil Works :

Necessary civil works of making opening and finishing them as required by Project

Manager: Lot 1 11295 11295

Cutouts for pipes i.e cutout of required size

Minor civil works such as making any small openings in walls for ducts etc.

Total 539675.10

Sr No DSR/ Description Unit Amount

Quantity Unit Rate

Supplying, installation, testing & commissioning of repeater panel wih

1 17.2.3 320 character/ Touch screen LCD display with inbuilt reset, acknowledge Each 1 108572 108572.00

and silence switches complete as required.

Supplying, installation, testing & commissioning of intelligent analog

17.2.4 addressable photothermal detector complete with mounting base Each 30 2846 85380.00

2 complete as required.

Supplying, installation, testing & commissioning of response indicator on

17.2.5 surface/recessed MS Box having two LED, metallic cover complete with Each 3 263 789.00

3 all connections etc as required.

Supplying, installation, testing & commissioning of fault isolator complete

5 with base as required.

Supplying, installation, testing & commissioning of addressable fire

8 control module complete as required.

Supplying, installation, testing & commissioning of addressable beam

detector with short circuit isolator (inbuilt or seperate) complete with

emitter and receiver including connections with remote test features etc

10 complete as required.

Supplying, installation, testing & commissioning of addressable manual

12 call point complete as required.

Supplying, installation, testing & commissioning of addressable horn cum

13 strobe complete as required.

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V

rated with annealed copper conductor having XLPE insulation, steel wire

14 armouring & FRLS outer sheath complete as required.

Total 329853.00