CONSTRUCTION OF INDUSTRIAL SHED AND BUILDING FOR NAGPUR AGARBATHI CLUSTOR ASSOCITION AT COMMON FACILITY CENTRE OF NAGPUR AGARBATTI CLUSTER ASSOCIATION PVT.LTD. , UMRED ROAD, NAGPUR

Amount

A. FACTORY BUILDING

Clearing site of bush and other miscellaneous material, levelling and setting out layout for the footing and other structural components for grid and centreline marking etc complete

Excavation for foundation in soft morum including removal of excavated material upto distace of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for foundation and necessary backfilling, ramming and watering including shoring and strutting etc complete ( Lift upto 1.50m)

Providing and laying in-situ concrete of 1:4:8 proportion with trap/quartzite/granite/gneiss/ basalt metal in foundation including necessary formwork, compacting and curing etc complete (with reversible drum type mixer with SCADA with Natural / VSI standard arteficial sand.

Providing and laying casi-in-situ / Readymix cement concrete M-25 of trap / granite/ quartzite / gneiss / basalt metal for RCC work in foundations like raft, strip foundations, grillage ang footings of RCC columns and steel stanchions, beams, lintels, slab, landing,arches, fins etc as per consultant drawings including centring and formwork, bailing out water, coverblocks, laying / pumping, compaction, curing and roughening if special finish is to be provided and/or finishing to formed surface with cement mortat 1:3 (Excluding reinforcement and structural steel) etc. complete with fully automatic microprocessor based PLC with SCADA enabled reversible drum type mixer / concrete batch mix plant ( Pan mixer)

Providing and fixing in position TMT-FE 500 bar reinforcement of various diameters for RCC pile caps, foundations, slabs, beams, columns, canopies, staircase, newels, chhajjas, lintels, pardis, coping, fins, archesetc as per detailed designs, drawings and schedules including cutting, bending and hooking the bars, binding with wires or tack welding and supporting as required complete

Providing and doing 230mm thick dry rubble stone soling / Packing under floor, foundation, roads, steps, ramps and other similar locations, handset vertically in regular lines etc with use of 10 Ton/12 Ton roller with mechanical rammees cop,ete as directed by engineer( Note - Formwork if required the same to be considered in quoted rate of this item

Providing and laying in-situ concrete of M-20 proportion with trap/quartzite/granite/gneiss/ basalt metal in flooring with mixing of steel fibre of about 20kg/m3 including necessary formwork, compacting and curing and finishing surface with vaccum dewater flooring including groove cutting and infil with polysulphided etc complete (with reversible drum type mixer with SCADA with Natural / VSI standard arteficial sand.

Brickwork of thickness 230m or more in cement mortar 1:5 for walls (with mullions and transoms which will be paid in concreting items), brick pillars, extenral walls, in steps, raised platform etc complete

Providing sand faced plaster ( sponged external in cement mortar 1:3 in all positions including base coat, scaffolding, keeping the surface of base coat rough to receive sand faced treatment, curing etc complete 20mm thick two coats

Providing plaster in cement mortar 1:4 with neeru finsihing to concrete or masonary surgace in all poostions including scaffolding and curing completen 12mm thick single coat.

Providing and applying two coats of approved shed of cement based paint "Snowcem" or equivalent approved make ove coat of cement primer to all external surfaces of plastered work or concrete including scaffolding, cleaning the surface, curing etc complete as per manufacturers specification and as directed by Engineer-in-charge.

Providing and applying two coats of primer, two coats of acrylic putty, two/three coats of best quality oil bound distemper if aproved shade and make doing work as per manufacturers specifications including preparation and cleading of the surface thoroughly with sandpaper, scaffolding and staging etc all complete for internal areas. Make Asian / Nerolac / Burger.

Maufacture, supply and erection of precast wall panel of concrete of M-40 with infills of stee fibre 20kg/m3 including transportation, handling, storage at site and plant as per consultants specification with all fixtures, screw, bolts and lifting and installation equipment etc complete

Providing and fixing rolling shutter fabricated from steel laths of 0.90mm with lock plate of 3.15mm thickness reinforced with angle 35x35x5mm fitted with sliding bolts and handles on both sides,MS channel section of depth 65mm and thickness 3.15 with holdfast arrangement, MS bracket plate 300x300x3.15 minimum size and shape with with square bar, suspension shaft of minimum 32 mm diameter, hood cover of MS sheet of 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear

Providing, supplying and fixing 30 mm single panel block door on framed openings provided including hold fast etc on framed opening provided, including door frame and panel with hinges, door handle of both sides wth door latch for locking arrangement, painting or laminate finish as per consultants specifications etc complete

Providing, supplying and fixing aluminum widows with two track frame and two panels with 6mm glass and security grill fixed on window frame with window lock, handle etc complete

Providing and fixing glazed glass including all necessary aluminun box supports, glass, fixtures, sealants, clips and packing etc complete.

Manufacturing and suppling Pre-Engineered Steel building including primary frame components, secondary members, sheeting, trims including bolts and screws, mastic tapes sealants, trims etc complete as per general arrangement drawings with material specifications specied by the consultant, including stacking and storing site as per standard PEB practices and directed etc complete

Providing and supplying rockwool insulation of density of 40kg/m3 of 50mm thickness as blanket rolls with underface of silver alumninum foil paper, silver linen tapes, screws for sidelaps and pvc coated, weldmesh or chickenmesh to be laid underside of insulation so as to cover complete sheeted area of roof and walls together etc complete.

Erection of PEB building components, rockwool insulation with pvc coated chicken mesh and all accessories components as per erection guidelines as directed

B. TOILET BLOCK

Excavation for foundation in soft morum including removal of excavated material upto distace of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for foundation and necessary backfilling, ramming and watering including shoring and strutting etc complete lift 1.5 m

Providing and laying in-situ concrete of 1:4:8 proportion with trap/quartzite/granite/gneiss/ basalt metal in foundation including necessary formwork, compacting and curing etc complete (with reversible drum type mixer with SCADA with Natural / VSI standard arteficial sand.

Providing and laying casi-in-situ / Readymix cement concrete M-25 of trap / granite/ quartzite / gneiss / basalt metal for RCC work in foundations like raft, strip foundations, grillage ang footings of RCC columns and steel stanchions, beams, lintels, slab, landing,arches, fins etc as per consultant drawings including centring and formwork, bailing out water, coverblocks, laying / pumping, compaction, curing and roughening if special finish is to be provided and/or finishing to formed surface with cement mortat 1:3 (Excluding reinforcement and structural steel) etc. complete with fully automatic microprocessor based PLC with SCADA enabled reversible drum type mixer / concrete batch mix plant ( Pan mixer)

Providing and fixing in position TMT-FE 500 bar reinforcement of various diameters for RCC pile caps, foundations, slabs, beams, columns, canopies, staircase, newels, chhajjas, lintels, pardis, coping, fins, archesetc as per detailed designs, drawings and schedules including cutting, bending and hooking the bars, binding with wires or tack welding and supporting as required complete

Brickwork of thickness 230m or more in cement mortar 1:5 for walls (with mullions and transoms which will be paid in concreting items), brick pillars, extenral walls, in steps, raised platform etc complete

Providing & Constructing 115 mm thk brick masonary iin cement mortar 1:5 including coping at 1.0 m etc. complete as directed

Providing sand faced plaster ( sponged external) in cement mortar 1:3 in all positions including base coat, scaffolding, keeping the surface of base coat rough to receive sand faced treatment, curing etc complete 20mm thick two coats

Providing plaster in cement mortar 1:4 with neeru finsihing to concrete or masonary surgace in all poostions including scaffolding and curing completen 12mm thick single coat.

Providing, IPS floor 40mm thk as under bed and fixing ceramic floor tiles over the bed including adhesive and other additives in toilets

Providing & Fixing white Ceramic tiles 0f 200x300 mm for toilet dado portion with including providing tiles adhesive , sand , Cement & jointing material etc. complete.

Providing and applying two coats of approved shed of cement based paint "Snowcem" or equivalent approved make ove coat of cement primer to all external surfaces of plastered work or concrete including scaffolding, cleaning the surface, curing etc complete as per manufacturers specification and as directed by Engineer-in-charge.

Providing and applying two coats of two coats of water based distemper if aproved shade and make doing work as per manufacturers specifications including preparation and cleading of the surface thoroughly with sandpaper, scaffolding and staging etc all complete for internal areas.

Providing and fixing toilet fixtures including european / indian WC, flush tank, tap, nahani tap, trap, water connection and sewarage pipe upto chamber etc complete as directed

Providing and fixing urinal fixtures including urinals, tap, nahani tap, trap, waterline, water connection and sewarage pipe upto chamber including etc complete as directed

Providing and fixing wash basins including all fixtures i tap, nahani tap, trap, water connection and sewarage pipe upto chamber etc complete as directed

Providing & fitting mirror of size 450mm x 600mm in toilet basin position etc. complete

Providing and fixing PVC watertanks of 5000 litres on toilet block slab with all necessary fixtures including ball cock, inlet and outlet pipes of 25mm dia and connecting supply lines and interconnection etc complete as directed

Providing & fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fitting i.c fixing the pipe with clamps at 1.00 m spacing . This includes joining of pipes & fittings with one step CPVC solvent cement & the cost of cutting chases & making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases & making good the walls 25mm dia

Providing and applying 18mm (average) thick plaster in C.M. 1:4 with plastisizer and water proofing & cold bonding compound of approved make, laid to slope with rounding of corners, making of edges, finished smooth with cement niroo, to toilet areas including necessary injection grouting and coating to the base slab and side walls upto 0.45m in height, including ponding test, all complete as directed.

Providing & fixing UPVC / VENT / WASTE SWR Pipe of required diameter conforming to I.S - 13592 , and I.S.- 4985 TO withstand continuous internal hydroulic pressure of 4 kg / cm2 including necessary fixtures and fittings , such as bends , tees , single junctions , double junctions & joining with rubber rings and lubricants , on wall by means of clip or in ground including necessary excavation, laying refilling , trench testing etc. complete. 150MM dia

Providing & fixing UPVC / VENT / WASTE SWR Pipe of required diameter conforming to I.S - 13592 , and I.S.- 4985 TO withstand continuous internal hydroulic pressure of 4 kg / cm2 including necessary fixtures and fittings , such as bends , tees , single junctions , double junctions & joining with rubber rings and lubricants , on wall by means of clip etc. complete i. 75 mm nominal outer dia pipes

ii. 100 mm nominal outer dia pipes

Providing, supplying and fixing 30 mm single panel block door on framed openings provided including hold fast etc on framed opening provided, including door frame and panel with hinges, door handle of both sides wth door latch for locking arrangement, painting or laminate finish as per consultants specifications etc complete

Providing, supplying and fixing M.S. fabricated fixed type ventilator as per design of size 500x600 with glass louvers of 100mm 3 nos and fixed opaque glass 4mm thick of size 250mm with all drilling, screws etc complete as directed

Providing & constructing Brick Masonary Inspection Chamber of size 600x600x800 mm including 1:4:8 cement concrete channels , Brick masonary , plastering from inside and air - tight R.C.C. lid with frame fixed in cement concrete , curing , testing etc. complete.

C. SEPTIC TANK, SOAK PIT, RAINWATER HARVESTING, GATE & FENCING

Excavation for foundation in soft morum including removal of excavated material upto distace of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for foundation and necessary backfilling, ramming and watering including shoring and strutting etc complete lift 1.5 m

Excavation for foundation in hard morum with mechanical excavators including removal of excavated material upto distace of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for foundation and necessary backfilling, ramming and watering including shoring and strutting etc complete lift Above 1.5 m

Providing and laying in-situ concrete of 1:4:8 proportion with trap/quartzite/granite/gneiss/ basalt metal in foundation including necessary formwork, compacting and curing etc complete (with reversible drum type mixer with SCADA with Natural / VSI standard arteficial sand.

Providing and laying casi-in-situ / Readymix cement concrete M-25 of trap / granite/ quartzite / gneiss / basalt metal for RCC work in foundations like raft, strip foundations, grillage ang footings of RCC columns and steel stanchions, beams, lintels, slab, landing,arches, fins etc as per consultant drawings including centring and formwork, bailing out water, coverblocks, laying / pumping, compaction, curing and roughening if special finish is to be provided and/or finishing to formed surface with cement mortat 1:3 (Excluding reinforcement and structural steel) etc. complete with fully automatic microprocessor based PLC with SCADA enabled reversible drum type mixer / concrete batch mix plant ( Pan mixer)

Providing and fixing in position TMT-FE 500 bar reinforcement of various diameters for RCC pile caps, foundations, slabs, beams, columns, canopies, staircase, newels, chhajjas, lintels, pardis, coping, fins, archesetc as per detailed designs, drawings and schedules including cutting, bending and hooking the bars, binding with wires or tack welding and supporting as required complete

Brickwork of thickness 230m or more in cement mortar 1:5 for walls (with mullions and transoms which will be paid in concreting items), brick pillars, extenral walls, in steps, raised platform etc complete

Providing & Fixing Shabad farshi on external surface with including providing tiles adhesive, sand, Cement & jointing material etc. complete.

Providing & applying with grouting the surface after through surface cleaning with slurry coat of neat cement 2.75 kg/m2 admixed with bonding agent/ water proofing/ plastisizing compound in due proportion.

Providing and filling stone aggregate in layers 40mm(850),20mm(600) and coarse sand 450mm and fine sand 300mm in soak pit with free board of 300mm upto inlet pipe for soak pit

Providing & fixing reinfoecement Cement concrete cover of 7.5 cm thick of required size 2.5m x 0.60m over soak pit including for steel reinforcement , curing os size etc. complete

Providing & fixing UPVC / VENT / WASTE SWR Pipe of required diameter conforming to I.S - 13592 , and I.S.- 4985 TO withstand continuous internal hydroulic pressure of 4 kg / cm2 including necessary fixtures and fittings , such as bends , tees , single junctions , double junctions & joining with rubber rings and lubricants , on wall by means of clip or in ground including necessary excavation, laying refilling , trench testing for rainwater draingage to harvesting pit etc. complete. 150mm dia core pipe

Providing & fixing precast concrete chamber of size 400x400x800 mm including 1:4:8 cement concrete channels , Brick masonary , plastering from inside and R.C.C. lid with frame fixed in cement concrete , curing , testing etc. complete.

Providing & Erecting barbed wire fencing with five rows of wire with 2.45 mm dia. G.I. pipe (Rezan/ concentina wire 0.75 mm dia.) with hot dip & G.I. coated hooks as per drawing supported on M.S. angles 50 x 50 x 6 mm at 2.0 mtr. c/c including fixing & fastening with wire, painting M.S. angles with one coat of red lead primer & two coat of oil paint etc. and fixing angle poles in concrete block 1:2:4 of size 400x400x450mm including excavation etc complete as directed

Fabrication, providing and fixing gate of size 4.0x1.8m with angles and RHS 25x40mm along with hooks including drilling holes, hooks and holdfasts, alignment, painting with red oxide primer and two coats of synthetic enamel paint as per drawings etc complete as directed

Construction of WBM road of 6.0m with excavation of 300mm and laying 80mm stones with morum in two layer sand compacting with road roller etc complete

Construction of approach path for office using heavy duty concrete paver blocks 100mm thickness with levelling using dust etc complete

Providing and fixing PVC vent pipe over septic tank of 100 mm and 6m length with strap fixture every 1.0m etc complete as directed.

Blueladder EPC Solutions Private Limited

BAJAJ STEEL INDUSTRIES LIMITED