WBPWD/EE/KNHED/NIQ-77/21-22

Amount

Supply of 8.5 TR Ductable type Split Air Conditioner of rated cooling capacity of 102000 BTU/hr. with Scroll compressor, 1 no. IDU of rated power supply-230V-1ph-50Hz. , 1no. ODU of rated power supply-400V-3ph-50Hz. Air-flow/per IDU:- 3400CFM. Refrigerant R410A ( Make: Hitachi/Daikine/O-General/Voltas) incl. sealing of the holes in wall created during the copper pipe connection between IDU & ODU by proper sand-- cement plastering and painting (both inside and outside) to match up with the original finish mending good the damages.

Erection ,testing,Commissioning Charges for 8.5 TR AC Machine

REFRIGERANT PIPING with Insulation Supply and installation of 20 gauge copper hard drawn Refrigerant piping complete with necessary fittings, GI bracket supports etc arrangements.(Make : Royku) with Supply & fixing of Nitrile Rubber tube insulation of 19 mm thick on copper pipe. Make Armacell / K Flex/ A Flex a) Liquid line(1 1/8")

b) Suction line (5/8')

AIR DISTRIBUTION SYSTEM Design, supply, fabrication and erection class VIII grade (120 GSM) GI sheet supply air duct along with necessary supports, flanges etc etc as required and as per IS 655 and IS 277 standards of followings gauges (Make SAIL/ TATA) a) 24 SWG thick

b) 22 SWG thick

PVC insulation flexible copper Cabling from Condensing Unit to control panel (Make: polycab/finolex/ KEI) a) 4 core 1.5 sq.mm communication cable

b) 3 core 2.5 sq.mm communication cable

AIR TERMINAL Supply ,fixing , testing & commisoning of extruded Aluminium Rectangular Grille with VCD for supply Air

Supply ,fixing , testing & commisoning extruded Aluminium Rectangular Grille without VCD for return Air

Supply , installation , testing and commissioning of opposed type GI Fresh air dampers

Supply , installation , testing and commissioning of opposed type GI Fire dampers

Supply , installation , testing and commissioning of opposed type GI volume Control dampers

Supply , installation , testing and commissioning of opposed type GI None Return dampers

CONDENSATE DRAIN PIPING Drain Water piping work out of PVC / HDPE hard pipes with Insulation, fitting, accessories, bends, elbows, tees, flanges, tappings, wall sleeves, hangers, supports, anchors. a) 25 mm Dia

DUCT THERMAL INSULATION Supplying and fixing of 19 mm thick duly laminated aluminium foil of mat finish closed nitrile rubber (Class 0) insulation on existing duct after applying suitable adhesive for Nitrile rubber. The joints shall be sealed with 50 mm wide and 3 mm thick self adhesive nitrile tape insulation complete (make Armacell / K Flex/ Supreme / A Flex)

10 mm thik Acoustic insulation of duct with fire retardant, closed cell, tri-dimentional chemically crosslinked polyethylene foam insulation conforming to Class 0 fire propagation rating and having minimum density of 32 kg/cu.m. Insulation material shall be supplied with factory applied pressure sensitive adhesive and protective cover. (Make - Armacell / K Flex / Supreme)

MISCLLENEOUS Supplying, fabrication & fixing M.S U-channel of 6 mm thick of size (75 mm x 40 mm x 40 mm) for installation of outdoor unit of 8.5 TR ductable incl. drilling 2 nos holes in each channel including cutting holes into the wall & grouting the same with cement concrete (1:1 ½ :3) etc. as per direction of EIC.

Charges for drop ceiling to cover the Indoor Units and other duct made of Aluminium Composite Panel Board

Charges for Trap Door made of Aluminium Composite Panel Board

Supply and fixing of Al powder coated continuous Grill

Special Terms and Conditions 1. It is stated that the above work place is existing COVID Hospital, In case of any mishap or accidental to any staff that deputed by the agency the whole responsibility is to be borne by the concern agency. 2. The Agency shall be responsible for provisioning of all COVID safety measures including regular sanitiziation of work places, vaccination of employees and compliance of stated directive and COVID appropriate norms. 3. All the issues related to the safety of the staffs should be taken care by the agency itself. (Defect Libilities period for 01 year from the date of completion of work) (Rate should be quotated including all taxes and duties)

S.R. REFRIGERATION AND APPLIANCES

SOUMYA ENTERPRISE