PROVN OF OH PROT FOR FOL DUMP WITH 10 SOLAR LT FROM CHERRY XG TO LPG GODOWN AT JUTOGH CANTT UNDER GE JUTOGH

Amount

Excavation in trenches, n. exc. 1.5 m wide and n.exc 1.5 m in depth, for foundation, etc or for shaft, well, cesspit, manhole, pier holes etc.n. exc. 10 sq m on plan and n. exc. 1.5 m in depth and getting out hard/dence soil, complete all as specified and directed.

M&L for PCC 1:4:8, type D-2, using 40mm graded crushed stone aggregate as in foundation filling and mass concrete complete all as specified and directed

M & L for walling of random rubble stone masonry uncoursed well bonded, bedded and solidly hearted built in CM 1:6 complete all as specified and directed.

M&L for PCC 1:2:4 type B-1, using 20 mm graded crushed stone aggregate as in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and directed.

M&L for form work to sides of concrete foundations, footings, bases of columns, rafts and raft beams, sides and soffits (if any) of foundations and plinth beams and similar work rough finished surface, vertical or to batter, complete all as specified and directed.

S&F MS TMT bar 10mm dia & over, cut to length bent to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

S&F mild steel as in joist channel, angle, MS pipe or tee sections fixed independently, without conneting plates etc structural steel conforming to Fe-410w, Gde- E-250 quality 'A' complete all as specified and directed.

S&F mild steel plates (plain or chequered) channels, square cut or notched (ordinary & counter sunk) forming holes, without any attachment steel conforming to Fe-410 Gde E-250 quality 'A' complete all as specified and directed.

S&F mild steel screw bolts (machine made) dia of neck exceeding 5 but not exc 10 mm with hexagonal or square head at one end and screwed the other end or screwed both end, each screw end to be fitted with washers and one hexagonal or square nuts, n.exc 5cm long complete all as specified and directed.

S&F structural steel work as in roof trusses (framed), trussed, purlins crane gantries, rails & fastenings & heavy brackets framimg (Beam, tee, angle, channel or flat section) including distance pieces, cleats etc. Structural steel conforming to Fe-410W, Grade-E 250, Quality 'A' complete all as specified and directed.

M&L for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering/cladding to wall fixed with self tapping screws, complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws complete all as specified and directed.

S&F 1.60 mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. complete all as specified and directed.

M & L for preparation of new steel surfaces of any descirption not otherwise described over 10cm width or grith and applying two coats of synthetic enamelled paint over and incl one coat of red oxide primer complete all as specified and directed.

Returning filling in including spreading, levelling watering & well ramming in layers n. exc. 25 Cm thick in each layers complete all as specified and directed.

Removing of excavated material exc 500m, but n.exc 1.50 km and depositing where directed at level not exc 1.5m above the starting point complete all as specified and directed.

M&L for PCC 1:3:6, type C-1, using 20mm graded crushed stone aggregate, as in coping including necessary form work, weathering, slightly rounded or chamfered angles and throating, coping of pole and strut, stay around the pole etc. complete all as specified and directed

S&F All-in-One solar street light of 24W is made in india with high efficiency mono crystalline solar PV module (12V, 40W), lithium ferro phosphate battery (LiFeP04) with in-built BMS technology (12.8V, 18 AH), high efficiency LED 24W, MPPT solar charge controller (12V, 5A), efficiency >93% and aluminium extruded body. All-in-One SSL is specially designed with PIR Motion sensor automaically control the dimming and brightness of light, which increases the backup time and luminous efficiency >110 lumen/ watt, LED life lime> 50000 hrs, viewing angle 120o, CCT 5700K, working temperature -10oC to + 55oC, driver in-built DC-DC type, IP-65 with overcharge protection, deep-discharge protection, over current protection, short circuit protection, over voltage protection incl galvanized steel pole of dia not less than 80mm and length not less than 6.0mtr including required drilling, welding etc. for fixing with fixing accessories, complete all as specified and directed. Note: Excavation and earth work shall be measured and paid separately.

M/S Jaswant Kumar Aggarwal

Pankaj Builders