PERIODICAL SERVICES TO CERTAIN BUILDINGS AND MISC B/R WORKS IN ZONE B AT MIRAN SAHIB UNDER GE JAMMU

Amount

Material and labour for preparation of old plastered surfaces and applying one coat of white wash on walls complete all as specified and as directed.

Material and labour for preparation of old plastered surfaces and applying two coats of white wash on walls complete all as specified and as directed.

Material and labour for complete removal of existing / old surfaces of ceiling and applying two coats of oil bound distemper over and including a coat of primer complete all as specified and as directed.

Material and labour for preparation of old plastered surfaces and applying one coat of Oil bound distemper on walls complete all as specified and directed.

Material and labour for preparation of old plastered surfaces and applying two coats of Oil bound distemper any color on walls complete all as specified and directed.

Material and labour for preparation of old plastered surfaces and applying one coat of cement based paint up to 12 metre height complete all as specified and directed.

Material and labour for preparation of old plastered surfaces and applying two coats of cement based paint up to 12 metre height complete all as specified and directed.

Material and labour for preparation of old plastered surfaces and applying two coats of exterior emulsion paint any colour up to 12 metre height complete all as specified and directed colored approved by Engineer-in-Charge.

Material and labour for preparation of floor surfaces and applying two coats of floor coat emulsion semi glossy finished paint any colour complete all as specified and directed colored approved by Engineer-in-Charge.

Material and labour for preparation of old surface of wood, rubbing down by sand, paper washing by water and applying one coat of synthetic enamel paint over wood surface over 10 cm width or girth complete all as specified and as directed.

Material and labour for preparation of old surfaces of steel over 10cm width or girth including rubbing down by sand paper, washing by water or scrapping the old coat by blowing lamp and applying one coat of synthetic enamel paint over steel surface over 10cm width or girth complete all as specified and as directed.

Taking down cement plaster from brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Material and labour for rendering 15 mm thick on fair faces mixing with waterproofing compound as per manufacturer's instructions (water proofing compound paid for separately) of brick work or concrete surfaces in cement mortar (1:4) finished fair and even without using extra cement complete all specified and as directed. Note: - Water proofing compound shall be measured and paid separately under respective item.

Material and labour for rendering 5 mm thick on ceiling or concrete surfaces in cement mortar (1:3) finished even and smooth without using extra cement and including taking down cement plaster from brick or stone walls etc including racking out joints, hacking for key complete all as specified and directed.

Material and labour for rendering 10 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for preparing new plastered surfaces and applying two coats of cement based paint over and including one coat of primer complete all as specified and as directed.

Material and labour for preparing new plastered wall surfaces and applying three coats of white wash complete all as specified and as directed.

Material and labour for preparing new plastered ceiling surfaces and applying three coats of white wash complete all as specified and as directed.

Material and labour for preparing new plastered surfaces and applying two coats of oil bound distemper over and including one coat of 1 mm wall care putty over a coat of primer complete all as specified and as directed.

Material and labour for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster (1:4) (1 cement : 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster (1:1/2:2 (1 cement : ½ coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing the top layer with brushes and water to expose the stone chippings including taking down old plaster complete all as specified and as directed.

Material and labour for cleaning and preparing kota surfaces and polishing of existing kota stone complete all as specified and as directed.

Material and labour for writing letters or figure (Block roman itallic or Indian) 10 cm high as in building no's complete all as specified and directed.

Material and labour for cleaning of water storage tank 500 litres completely by removing all scale dirt / dust of any description with chlorine complete all as directed at site including taking down and refixing of tank at the same place, any damage will be rectified by the contractor at his own risk and cost all as specified.

Material and labour for cleaning of water storage tank 1000 litres completely by removing all scale dirt / dust of any description with chlorine complete all as directed at site including taking down and refixing of tank at the same place, any damage will be rectified by the contractor at his own risk and cost all as specified.

Taking down chowkhats or frames (without taking off shutters from the frame) exceeding 1.50 Sqm but not exceeding 4 Sqm each and removing from site all as specified and as directed.

Taking down chowkhats or frames (without taking off shutters from the frame) not exceeding 1.50 Sqm each and removing from site all as specified and as directed.

Taking down shutters from the frame of any description exceeding 1 Sqm but not exceeding 2 Sqm each leaf and removing from site complete all as specified and as directed.

Supply and fixing pressed steel frames of size 105 X 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate and one shop coat of primer etc complete and fixed all as specified and as directed.

Supply and fixing pressed steel frames of size 125 X 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate and one shop coat of primer etc complete and fixed all as specified and as directed.

Material and labour for cement concrete (1:3:6) type C-0 (using 12.5mm graded crushed stone aggregate) filling in, pressed steel chowkhats, bed block for holdfast and the like all as specified and as directed.

Supply and fixing 35mm thick second class hard wood panelled shutter plain, framed with panels of timber flat on both sides supplied and fitted to chowkhats complete all as specified and directed.

Supply and fixing 35 mm thick second class hard wood glazed and skelton shutters sizes of members as specified in SSR (Part-I) clause 8.24 (a), open, rebated and prepared to receive glass or gauge (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass or gauge etc complete all as specified and as directed.

Supply and fixing solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube supplying fixing in opening as per specification and drawing as in door / kitchen cabinet frame complete all as specified and as directed.

Supply and fixing factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of mild steel tubes for top and bottom rails. Mild steel frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of plain colour PVC sheet to be fitted in the mild steel frame welded / sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing as in kitchen cabinet / toilet shutter complete all as specified and as directed.

Supply and fixing box type steel windows / Ventilator (factory made) outer frame made out of ERW tube 'P' section 65 X 45 X 25 mm and shutter of ERW tube 'P' section 50mm X 35mm X 20mm openable (double shutter) with glazed shutter on external side and gauzed shutter on internal side including steel pintel hinges steel handle 100 mm long mild steel tower bolt 02 no's on each shutter stopper of 'Z' section and its locking arrangement and mild steel hook and eyes suitable for fixing cooler / AC window complete all as specified and shown on drawings No CEPZTD-324/07 Sh 1/3 to 3/3 complete all as specified and as directed. Notes: - The quoted rates shall also include: - (i) One shop coat of zinc chromate primer on all exposed surface and one coat of tar on the ends of steel surface in contact with bricks / concrete surface. (ii) 4 no's MS steel lugs made of 20 X 5 mm iron flat 200 mm long. (iii) 10 mm Sq Bar grill / guard bar design as per drawing. (iv) PCC block for embedding lugs. (v) Two coats of synthetic enamel paint.

Supply and fixing galvanized mild steel wire clothes power woven 0.46mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed.

Supply and fixing in repairs galvanized mild steel wire clothes power woven 0.46mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed.

Supply and fixing 300 mm long aluminium anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding door bolt of extruded section complete all as specified and as directed.

Supply and fixing aluminium anodised barrel tower bolts 150 mm size and fixed complete all as specified and as directed.

Supply and fixing aluminium anodised barrel tower bolts 200 mm size and fixed complete all as specified and as directed.

Supply and fixing 150 mm aluminium handle fabricated type complete all as specified and as directed.

Supply and fixing floor door stopper of aluminium alloy body and tongue 140 mm anodised with hard drawn steel spring fixed in floor complete all as specified and as directed.

Supply and fixing stainless steel butt hinges 75mm complete all as specified and as directed.

Supply and fixing mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate fixed / welded to door frame complete all as specified and as directed.

Material and labour for preparing new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

Material and labour for preparing primer painted steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

Hacking out old broken glass panes (any thickness, size, quality or description) from wooden / steel frames, glazed with putty or fixed with beads complete all as specified and as directed.

Supply and fixing 3 mm thick sheet glass ordinary quality and glazing with oil putty / beads in squares not exceeding 0.5 Sqm each pane complete all as specified and as directed.

Description all as per Ser item No. 48.00 here-in-before but figured glass, pin head type complete all as specified and as directed.

Material and labour for provision of roof treatment with polymeric waterproofing membrane all as given below:- (a) Taking down existing water proofing treatment and cleaning roof surface by washing and rubbing etc. and removing the material retrieved to a distance not exceeding 500 m where directed. (b) Material and labour for plastering 10mm thick in cement mortar (1:3) using 100% coarse sand on roof surface including water proofing compound as per manufacturer's instructions and as directed by Engineer-in-Charge. (c) Applying a coat of bituminous primer conforming to IS : 3384-1986 @ 0.25 Iitres/sqm on prepared surface and allowed to dry. (d) Applying and laying 3mm thick APP membrane having non woven polyester matt at core and covered with high quality polymeric asphaltic protected thermo fusible HMHDPE film on both sides with overlaps 10cm and 15 cm at longitudinal and transverse direction respectively and sealed by flame, sealing all overlaps complete including treatment at all junctions and corners. The membrane shall be torched into groove on vertical plane and groove sealed with cement mortar (1:3). (e) Material and labour for cement concrete tiles 25 cm x 25 cm x 20-22mm thick, machine pressed, set, jointed and pointed in neat cement slurry as in floors / terraces over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

Material and labour for provision of roof treatment with polymeric water proofing membrane all as given below:- (a) Taking down existing water proofing treatment and cleaning roof surface by washing and rubbing etc. and removing the material retrieved to a distance not exceeding 500 m where directed. (b) Material and labour for plastering 10mm thick in cement mortar (1:3) using 100% coarse sand on roof surface including waterproofing compound as per manufacturer's instructions and as directed by Engineer-in-Charge. (c) Applying a coat of bituminous primer conforming to IS : 3384-1986 @ 0.25 Iitres/sqm on prepared surface and allowed to dry. (d) Applying and laying 3mm thick APP membrane having non woven polyester matt at core and covered with high quality polymeric asphaltic protected thermo fusible HMHDPE film on both sides with overlaps 10cm and 15 cm at longitudinal and transverse direction respectively and sealed by flame, sealing all overlaps complete including treatment at all junctions and corners. The membrane shall be torched into groove on vertical plane and groove sealed with cement mortar (1:3). (e) Material and labour for two coats of aluminium paint on membrane surface all as specified and directed.

Material and labour for factory made single extruded WPC (Wood Polymer Composite) solid door / window / Ceosetory windows and other frames / chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibres (wood powder / rice husk / wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 grams) fabricated with mitred joints after applying PVC solvent cement and screwed with full body threaded star headed stainless steel screws having minimum frame density of 750 kg / cum, screw withdrawal strength of 2200 N (Face) and 1100 N (Edge), minimum compressive strength of 58 N/mm², modules of elasticity 900 N/mm² and resistance to spread of flame of Class 'A' category with property of being termite / borer proof, water / moisture proof and fire retardant and fixed in position with stainless steel dash fasteners of required dia and length complete as per directions of Engineer-in-Charge. Note: - For WPC solid door / window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Supply and fixing 100mm stainless hinges with stainless steel screws fixed to PVC chowkhats / shutter complete all as specified and as directed.

Supply and fixing 18mm thick factory made 100% solid WPC flush shutter for almirah / cupboard made from co-extruded three layer rigd foam sheet (single extruded) with 0.8 to 1mm thick outer layer having density not less than 1400 Kg / Cum and density of central core not less than 600 Kg / Cum manufacturer by an ISO : 9001/2015 certified company complete all as specified and directed.

Supply and fixing modular auto concealed soft closed hinges 35mm, 110 degree size fixed to cupboard complete all as specified and as directed.

Supply and fixing 304 grade stainless steel handle 100mm fixed to cupboard complete all as specified and as directed.

Supply and fixing magnet catcher 50 mm size for kitchen cupboard shutter complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

Material and labour for cement concrete (1:2:4) type B-1 (using 12.5mm graded crushed stone aggregate) as roof kerbs and coping rounded or chamfered on edges complete all as specified and directed.

Material and labour for providing and fixing in position suspended false ceiling system using 'E' grid suspended ceiling grid system. The size of grid shall be 600 X 600mm with galvanised iron frame work, main runner 39 X 24mm, cross tee 29 X 24mm and wall angle 22.2 X 22.2mm using 4mm thick high pressure stream cured non primered classic / designer variant 'E' board ISI marked IS No : 14862-2000. Fibre cement 'E' board to be placed in the grid of 'E' grid suspended ceiling grid system duly suspended by 4mm dia galvanised iron bar hangers from the purlins of the roof with butterfly clips including dismantling wall and ceiling boards (fibre pulp / insulation) any thickness including cover fillets including taking down all electric fittings fixed with ceiling and refixing the same in position after replacing the ceiling complete all as specified and as directed.

Demolition of concrete in ground floor not exceeding 15 cm in thickness below or above ground level including floor finish such as tiles of any thickness and any description etc. complete all as specified and as directed by Engineer-in-Charge.

Demolition of lean / cinder concrete filled in sunken slab, wire brushing the surface, cleaning all loose dirt by dusting / watering sunken portion of water closet, toilet etc and applying cement slurry @1.5 Kg per Sqm complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Material and labour for screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cement mortar (1:6) complete all as specified and as directed.

Material and labour for non skid tiles coloured tiles exceeding 0.06 Sqm and not exceeding 0.11 Sqm, 6-7mm thick of any colour pattern and 1st quality as approved by GE in floor set and jointed in neat cement slurry and pointed in colored cement to match, pattern, laying etc of tiles and shade, colour shall be decided by Engineer-in-Charge complete all as specified and as directed.

Material and labour for any coloured non skid jointless ceramic tiles 6 to 7 mm thick, area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in colored cement to match pattern, laying etc of tiles and shade, colour shall be decided by Engineer-in-Charge complete all as specified and as directed.

Description all as per Ser item No 66.00 here-in-before but in vertical surfaces including 10 mm thick cement rendering / backing coat of cement in cement mortar (1:4) complete all as specified and as directed.

Material and labour for coloured glazed ceramic tiles glossy finish of size 450 x 300 x 5-6mm thick in dado’s / skirting etc (1st quality) set and jointed in neat cement slurry and pointed in colored cement to match pattern, laying etc of tiles and shade, colour shall be decided by Engineer-in-Charge including 10 mm thick cement motar (1:4) complete all as specified and as directed.

Material and labour for 16 to 18mm granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including screed bed or bedding layer of mortar 20mm thick in cement mortar (1:6) and taking down old complete all as specified and directed.

Material and labour for machine cut kota stone slab flooring 18-20 mm thick over and including 20 mm thick cement screed bed in cement mortar (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing complete including dismantling of old stone floor and PCC all as specified and directed.

Material and labour for 75mm thick cement concrete (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in floor / plinth protection laid in suitable panels finished even and fair all as specified. 6mm joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 85/25 or 80/100 grade and three parts of sand (all by weight) complete all as specified and as directed.

Material and labour for providing water proofing treatment to sunken floors all as given below: - (a) Making fillet of size 25mm x 25mm at corner of slab and wall with polymer modified cementitious (PMC) mortar consisting of one part of tapecrete P-151, two parts of cement and 6 parts of fine sand by weight. (b) Sealing of joints of pipe with epoxy putty CICO POXY LC or epoxy mortar CICO POXY 2125. (c) Cleaning the concrete surface by brushing and watering and applying a coat of tapecrete P-151 Acrylic Polymer Modified cementitious slurry consisting of one part of TAPECRETE P-151 and two parts of cement by weight. The coating shall be carried out upto 300mm above FFL and shall be allowed to dry for 4-6 hours. (d) Appying a coat of TAPECRETE brush topping 1.5mm thick consisting of one part of TAPECRETE P-151, two parts of cement and two parts of silica sand by weight and cured to 2 days. (e) Applying 15mm thick plaster in cement mortar (1:4) mixed with CICO super @ 100ml per 50 Kg cement on treated surface.

Supply and fixing galvanised iron tubing of 15mm bore medium grade including necessary fittings complete including taking down old pipe complete all as specified and as directed. ISI marked.

Supply and fixing galvanised iron tubing of 20mm bore medium grade including necessary fittings complete including taking down old pipe complete all as specified and as directed. ISI marked.

Supply and fixing in repairs bib taps, fancy type chromium plated (long body) with crutch or butterfly handle, screwed down, screwed for iron pipe of 15mm dia bore including necessary fittings complete all as specified and as directed.

Supply and fixing in repairs stop cock, chromium plated fancy type screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe of size 15mm dia bore complete all as specified and as directed.

Supply and fixing in repairs stop cock, chromium plated fancy type with long shank and cup (concealed type) screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe of size 15mm dia bore complete all as specified and as directed including cutting walls and making good surfaces. Note: - Including making good of surface as existing including tiling, color wash, distempering, plastering etc.

Supply and fixing in repairs chromium plated pillar taps with capstan heads, chromium plated, screwed down high pressure of size 15mm dia bore complete all as specified and as directed.

Supply and fixing in repair PVC connection 15mm bore and for 600 mm long with brass or PVC nuts and PVC washer complete all as specified and as directed.

Supply and fixing in repair PVC waste pipe 32mm bore complete all as specified and as directed.

Supply and fixing in repair PVC waste pipe 40mm bore complete all as specified and as directed.

Supply and fixing in repairs PVC valveless syphon action type low level flushing cistern 8 - 10 litres capacity with inlet, ball valve, float valve, push button type handle including telescopic flush pipe 32mm dia of stainless steel with long bend of 32mm dia complete all as specified and as directed. Make: - Prayag Cat Part No 501 or equivalent in Parry ware (Slimline) / Hindustan Sanitaryware).

Supply and fixing in repairs chromium plated tubular towel rail, 20mm dia 'D' type 60cm long between flanges complete all as specified and as directed.

Supply and fixing in repairs chromium plated shower rose with arm and not less than 125mm dia with or without swivel joints, including fixing to steel pipe complete all as specfied and directed.

Supply and fixing in repair 100mm dia steel grating with or without hole complete all as specified and as directed.

Supply and fixing in repair 125 mm dia steel grating with or without hole complete all as specified and as directed.

Supply and fixing in repairs bib tap standard of PTMT any colour screwed for iron pipe and fixed of 15mm dia bore including necessary fittings complete all as specified and as directed.

Supply and fixing in repair waste fittings chromium plated with long screwed shanks and fly nuts of size 32mm ISI marked complete all as specified and as directed.

Supply and fixing in repair waste fittings chromium plated with long screwed shanks and fly nuts of size 40mm ISI marked complete all as specified and as directed.

Supply and fixing in repairs PVC seat cover for EWC, white colour including chromium plated hinges complete all as specified and directed at site.

Supply and fixing in repairs chromium plated jet spray with flexible pipe not less than 90 cm long fixed to EWC suitable for 15mm bore complete all as specified and directed.

Supply and fixing in repairs PVC overhead tank cover / lid of size suitable for capacity of above 500 litres and upto 1000 litres capacity complete all as specified and directed.

Supply and fixing in repair of aluminum (extuded section body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.

Supply and fixing in repair 1000 litre capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) three layers hoisted and fixed in position including 20 mm float valve (PVC) and 02 no's galvanised iron tank nipple complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repair 500 litre capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) three layers hoisted and fixed in position including 20 mm float valve (PVC) and 02 no's galvanised iron tank nipple complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repairs sinks with drainage board made of stainless steel 0.63mm thick in kitchen with plugs, washers and waste, including bedding in cement mortar on wall including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410 mm x 330 mm x 160 mm complete all as specified and as directed.

Supply and fixing in repair stainless steel kitchen plate rack made out of not less than 0.63mm thick stainless steel sheet of size 750mm x 600mm x 250mm of approved pattern complete all as specified and directed.

Supply and fixing in repairs vitreous chinaware wash hand basin white, flat back of size 550 x 400 mm excluding tap but including brackets fixing to wall and two No's 10mm dia 100mm long nut and bolt over brackets and chromium plated waste coupling complete all as specified and as directed.

Supply and fixing in repairs vitreous chinaware wash hand basin white, countersunk oval type of size 550 x 400 mm excluding tap but including fixing to RCC slab and chromium plated waste coupling complete all as specified and as directed.

Supply and fixing in repair vitreous china urinals, flat back size of 465 x 355 x 265 mm white with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2) securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe, brackets and chromium plated waste coupling complete all as specified and as directed.

Supply and fixing in repair 19/20 mm thick prelaminated particle board interior grade prelaminated one side with decorative choice lamination and other side balancing white including edge binding of same colour in all ends and fixed with screws to steel / timber frame work including hinges as in cupboard shutters / kitchen cabinet etc color approved by Engineer-in-charge complete all as specified and directed.

Supply and fixing in repairs gun metal, globe or gate valve with iron wheel head, 20 mm bore, screwed both ends for iron pipe all as specified and as directed.

Supply and fixing in repairs gun metal, globe or gate valve with iron wheel head, 15 mm bore, screwed both ends for iron pipe all as specified and as directed.

Supply and fixing in repair 18mm thick factory made 100% solid WPC flush shutter for almirah / cupboard made from coextruded three layer rigid foam sheet (single extruded) with 0.8 to 1mm thick outer layer having density not less than 1400 Kg / Cum and density of central core not less than 600 Kg / Cum manufactured by an ISO : 9001/2015 certified company complete all as specified and as directed.

Material and labour for filling the sunken portion with PCC (1:5:10) type E-2 (using 40mm graded crushed stone aggregate) upto required level complete all as specified and as directed.

NOTE NO 1: - Samples of materials as approved will be kept in GE's sample room. NOTE NO 2: - All fittings and fixtures mentioned above will be fixed to the satisfaction of Engr-in-Charge and GE. NOTE NO 3: - Warranty certificate to the Engineer-in-Charge where ever applicable shall be submitted by the Contractor at the time of fittings.

M/S A TO Z ENGINEERS

N S MANHAS

J P TECHNO

AKSHAY CONSTRUCTION COMPANY

M/S Shesh Paul Gupta

Bidder Name

M/S Shesh Paul Gupta

N S MANHAS

PAKAYA BUILDERS AND DEVELOPERS PVT LTD

AKSHAY CONSTRUCTION COMPANY

M/S A TO Z ENGINEERS

J P TECHNO