Immediate Restoration of flood damaged to Bahampur to Balimukh Road under SDRF for the year 2017-18

Amount

SPT Br. Part

Supply and driving sal piles 25cm to 30cm dia. Dressed to heart wood including making length in every 30 cm interval,coal tarring two (2) coats with best tar applied hot (Rate inclusive of the cost of the required quantity of tar.) With pile Engine Portion of pile actually driven App. Pile Middle pile Fendar pile

Portion of pile remaining above ground App. Pile Middle Pile Fender pile

Supplying, fitting and fixing timber beam and bearing beam rectangular in size fitted with M.S. etc. supplying spikes etc. as necessary and coal tarring two (2) coats with best tar applied hot as directed (Rate is inclusive of cost of the required quantity of tar) Using Sal Timber

Labour for fitting and fixing RSJ beam, old Cl saddle etc. in position including necessary scaffolding and fixing necessary bolts and nuts, painting two (2) coats complete (Tar-Steel paints to be supplied by the contractor at his own costs) 400x180

Labour for Making U shaped flat iron strap 0.5mX0.3m size from 150mmX12mm size MS flat including providing 10 bolts holes and fitting with 0.35m long 20mm dia MS bolts including fitting tightly withbearing beam, pile and RSJ beams etc. as directed by the Department.

Sal Wood work including supplying, fittng and fixing complete with necessary MS bolts , nuts, nails, screw etc. and coal tarring two (2) coats with best tar applied hot (Rate is inclusive of the cost of the required quantity of tar) Undressed in floor planks, collars, bracing, standards, wheel guards, struts and railings, runner belts, rails, posts etc Joist Runner Decking Wheel Guard W.G. runner Belt Cross Collar Fender Collar Fender Belt Cross fender

In track way planks (alternate nailing to be done with decking in a swggregate way)

Azar or Nahar or Nageswar or zarul or sundi or gamari wood works including supplying, fitting and fixing complete with necessary MS bolts, nuts, nails, scerws etc. and coal tarring two coats (2) coats with best tar applied hot ( Rate is inclusive of the cost of the required quantity of tar) Rail Post Struts Railing

Road Part

Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5m, transporting to site spreading grading to required slope and compactin gto meet requriement of Table 300.1 and 300.2 with a lead upto 1000m as per Technical Specification Clause 301.5 i) From private Land

Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 (Including Compansation of earth) (a) including cost of testingmaterials at site and laboratory as directed by the deptt. i) From private land

Construction of granular Sub base by providing well graded material, spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotavator at OMC, and compacting with vibrator roller to achieve the desired density complete as per Technical Specification Clause 404.(with initial lead of 5.00 km) (ii) For Grading Material (Gr-II) GSB

Protection works for Br. No. 3/1

Provding and laying pitching on slopes laid over prepared filter media as per drawing and technical specification Clause 1302 Stone/ Boulder

Providing and laying filter material underneath pitching in slopes complete as per drawing and technical specifications clause 1302

Providing and laying boulder apron for bed protection with stone boulders of minimum size and weight as per Teble 1300.1 no fragment weighing less than 25kg laid dry complete as per drawing and technical specification clause 1301.

Construction of 1000mm dia HP culvert

Earthwork in excavation for foundation of structures upto 3m depth as per drawing and technical specification clause 1104 including setting out, consturction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material.

Plain cement concrete M10 (1:3:6 nominal mix) in levelling course below open foundation of Head walls as per drawings & technical specification clause 1109

Bedding for pipe (ii)Type B (First class) Bedding Laying (First Class bedding on well compacted sand, moorum or approved granular material as per Clause 1105(ii) (i) Sand Filling

Stone masonary work in cement mortar 1:3 in foundation complete as per drawing and technical specifications (b) Random Rubble masonary

Platering with cement mortar (1:4) 15mm thick on brickwork in substructure as per technical specifications clauses 613.4 & 1204

Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in double row includign fixing collar with cement mortar 1:2 but excluding excavation, protection works, back filling, concrete and masonry works in head walls and parapets Clause 1106. (A) 1000mm dia

Safiqul Hoque

M/S Pakhi Construction