SPECIAL REPAIR TO DRAINS, CHAMBER AND CONNECTING WORKS UNDER GE (SOUTH) MAMUN AT MAMUN MIL STATION

Amount

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc and removal of rubbish out off the premises complete all as specified and directed.

M&L for Brick work with Fly Ash Brick (Non-Modular) Class 7.5, straight or curved on plan exceeding 6m mean radius built in CM (1:4) incl complete all as specified and directed.

M&L for brick work (except bricks) straight or curved on plan exc 6m mean radius built in (1:4) etc complete all as specified and directed. (Note : Serviceable bricks retrieved from dismantling shall be reused in this work/item)

Demolition of cement concrete (unreinforced) in grounds floors and pavings not exceeding 15 cms thickness (below or above ground level) of any description and in any position including dismantling of unserviceable/old serviceable pavers complete all as specified and directed.

M&L for 60mm thick factory made rubberised coloured (laminated) interlocking paver block (using vibro compaction method) (topping thickness not less than 5mm) in white cement and non fadable glossy pigment of approved shade of any shape and size conforming to IS-15658-2006 of M-35 grade over and including 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) over and including 50mm thick sand cushioning complete all as specified and directed.

M&L for 60mm thick factory made rubberised coloured (laminated) interlocking paver block (Except 60mm thick pavers ) (topping thickness not less than 5mm) in white cement and non fadable glossy pigment of approved shade of any shape and size conforming to IS-15658-2006 of M-35 grade over and including 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) over and including 50mm thick sand cushioning complete all as specified and directed. (Note : Serviceable pavers retrieved from dismantling shall be reused in this work/item)

M&L for Framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work etc conforming to Fe 410 -W (Gde- E- 250) quality - B, including dismantling of old frame work complete all as specified & directed.

M&L for Preparation of new steel Surfaces of any description, over 10cm in width or girth,not otherwise described & applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surface complete all as specified and directed.

Taking down cement plaster on brick or stone walls,etc including racking out joints , hacjking for keys,scrubing down with water etc, and removal of rubbish out off the permises complete all as specified.

M&L for rendering 10mm thick on fair faces of brick work or concrete surface in CM (1:4) on wall surfaces finished even and smooth without using extra cement complete all as specified & directed.

M&L for Plain Cement concrete PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified & directed.

M&L for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in coping, in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed finished the surface even and smooth without using extra cement etc complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description in any position not otherwise specifically provided for cement concrete (reinforcement cut as required to faciliate demolition) complete all as specified and directed.

M&L for Renforced cement concrete M-25 (Design Mix ) using 20mm graded crushed stone aggregate as in Fondation includings rafts, footings ,foundation beams, bases for columns, basements slabs, and mass concrete etc complete all as specified and directed. (Note: Reinforcement shall be measured and paid separately)

M&L for Renforced cement concrete M-25 (Design Mix ) using 20mm graded crushed stone aggregate as in walls ,retaining walls, basements walls, ballast walls and the like any thickness above top of footings includings attached pilasters and buttresses etc complete all as specified and directed. (Note: Reinforcement shall be measured and paid separately)

M&L for Renforced cement concrete M-25 (Design Mix ) using 20mm graded crushed stone aggregate as in chajjas, slabs supportrd on walls ,facias etc complete all as specified and directed. (Note: Reinforcement shall be measured and paid separately)

Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter for Rough finished surfaces of concrete complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), etc.; vertical or to batter for fair finished surfaces of concrete complete all as specified and directed.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide for fair finished surfaces of concrete complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Excavation in trenches n exc 1.5m wide and n exc 1.5m in depth for foundation etc (for cable, pole stay manhole etc), in any type of soil and getting out, complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc. 25cm thick, etc complete all as specified and directed.

Removing excavation material n exc. 50m & deposited where directed at a level n exc. 1.5m above the starting point etc complete all as specified and directed.

M&L for Plain Cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregates) as in surface channels, drains , complete all as specified and directed.

M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends complete all as specified and directed.

JAGIR CONSTRUCTION CO

KULBHUSHAN AGGARWAL

D S INFRASTRUCTURE AND DEVELOPERS

M/S J N TRADERS

Sanjay Constructions