Loading
Loading…
Loading…
Tender ID
Tender Value
₹6.2 L
EMD Value
₹3,105
Closing Date
23 Mar 2026, 2:00 pmClosed
Executive Engineer PHED Division Nimbahera
Executive Engineer PHED Division Nimbahera
CONSTRUCTION AND COMMISSIONING OF TUBE WELL AND INSTALLATION OF SUBMERSIBLE PUMP SETS AT RWSS BINOTA OF SUB DIVISION NIMBAHERA DISTRICT CHITTORGARH WITH ONE YEAR DEFECT LIABILITY PERIOD
2026_PHCJA_547410_1
Nit no. 130 Yr. 2025-26
Open Tender
Civil Works - Water Works
Percentage
30 days
Nimbahera
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
Executive Engineer PHED Division Nimbahera
₹3,105
Yes
23 Mar 2026
19 Mar 2026
23 Mar 2026
19 Mar 2026
23 Mar 2026
19 Mar 2026
19 Mar 2026 - 23 Mar 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Construction of tube well after completion of drilling by rotary /percussion method & up to 100 mtr. depth in all type of rocks by DTH system as per IS:2800 Part 1: 1991 and IS:2800 Part II: 1979 (both amended up to date) and technical specifications. The work shall be deemed completed only after obtaining sand free water. The bore well should have a throughout nominal size bore beyond casing pipe. | |||||
| 2Nominal bore 200 mm dia. | |||||
| 3Add 15% extra on above item (Item No 2.4.1 to 2.4.2) for drilling depth beyond 100 mtr and up to 200 mtr from ground level, rate shall be applicable for only extra depth beyond 100 mtr and up to 200 mtr. | |||||
| 4Supply of ERW M.S. black casing pipe ISI marked (IS: 4270/2001) or amended up to date of following sizes | |||||
| 5200 mm dia NB (Thickness of pipe 5.4mm & mass of tube 28.46 Kg/m) | |||||
| 6Supply & Fixing tube well cover of MS sheet 8mm thick at top & 5mm thick 100mm wide shroud around the edge so as to form a cap on the top end of casing pipe with GI Nipple 45cm long & two GI flanges at both ends in 80mm sizes passing through a hole in the centre of MS sheet. A 25 mm socket with end plug shall also be welded over top plate. A GI nipple having outside thread of size 1/2" (for installation pressure gauge) shall be provided & welded with 80mm GI nipple near top plate nipple shall be provided with end plug. 250 mm dia | |||||
| 7 | Supply & Fixing M S clamp set of 50x6 mm flat from iron with nuts and bolts etc. for holding the riser pipe assembly of submersible pump set. | - | Each | 727 | - |
| 8Supply & Installation of 3 phase ISI marked submersible motor pump set of three star or better rating of BEE and as per IS: 8034-2018 (pump) and IS 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/DCB. The job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect. | |||||
| 9 | 9.3 KW (12.5 HP) & head up to 120 mtr. | - | KW | 5,800 | - |
| 10Supply and Fixing of electric control feeder panel comprising of suitable rating MCCB , fully automatic star-delta starter, over load relay, ampere meter with CTs, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc. complete suitable for three phase pump set. The panel should have space for energy meter ( supplied by DISCOM). All these equipments shall be housed by panel box made out from 18 gauge M.S. Sheet with powder coating. Panel should be of minimum size 900 x 600 x 450 mm with Stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg’s length 18" and double door including in built locking system. The legs should be embedded in M-15 cement concrete plat form. The size of CC platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. The panel should have opening of suitable size in front of space for energy meter with glass for meter reading. The operation of panel should be suitable for on 440 Volt AC Supply. | |||||
stage.html
html • 0.02 MB
cancelled_1.pdf
pdf • 0.89 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.79 MB
td130.pdf
Tender Documents • 3.58 MB
BOQ_976049.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .