CA NO CWE/PAT/T-51/2020-21 SPECIAL REPAIR TO BUILDING NO T-19 MEDIUM RESET BAY OF ZONAL WKSP P-42 OF ARMY AVN SQN AND P-39 OF MH PATIALA

Amount

Schedule 'A'Section-I (Building Works)

Total amount of Sch 'A' Sec I (Building Works)

Schedule 'A'Section-II (INTERNAL ELECTRIFICATION WORKS)

Total amount of Sch 'A' Sec II (Internal Electrification Works)

Schedule 'A'Section-III (ROAD / PATH WORKS)

Total amount of Sch 'A' Sec III (Road / Path Works)

Schedule 'A'Section-IV (BOUNDARY WALL WORKS)

Total amount of Sch 'A' Sec IV (Boundary Wall Works)

Schedule 'A'Section-V (Misc Items of Works) Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col. 5 siginifies this fact only.

Supply only integral liquid water proofing compound complete all as specified and directed.

Preparation of new plastered surfaces/existing platered surfaces and applying acrylic wall care putty in internal/external walls/RCC surfaces/soffits of chajjas/roof projections/ cantilevers /balcony/ceilings etc (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving interior/exterior painting complete all as specified and directed. Notes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further external finishes. Please note that the further external finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order.

Preparation of surfaces and applying 02 coats of interior emulsion paint (light shade) @ 10 sq.m/litre/2 coats to wall surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed.

Preparation of surfaces and applying 02 coats of interior emulsion paint (white shade) @ 10 sq.m/litre/2 coats to ceiling surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed.

Preparation of surfaces and applying 02 coats of exterior emulsion paint (light shade and highlighter of approved colour) @ 5 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion complete all as specified and directed.

S&F factory made flush shutters 35mm thick, BWP confirming to IS 2202, solid core construction, with block board core and plywood face panels, commercial type on both sides including supply and fixing following items : (a) Stainless Steel (304 Grade) Finished Butt Hinges 125mm with stainless steel screws - 4 nos. per leaf (b) Stainless Steel (304 Grade) Finished Square Tower Bolt 200mm long - 2 nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos. per leaf (d) Stainless Steel (304 Grade) Finished Sliding Bolt 300 mm - 1 no. per leaf (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 nos. per leaf

S&F 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-1 section 8 clause 8.20(a), kiln seasoned and chemically pressure treated all as specified including S&F of stainless steel 304 Grade (natural finish) wire cloth (0.36 mm nominal dia of wire and average width of aperture 1.40mm) and the supply and fixing following items: (a) Stainless Steel (304 Grade) Finished Butt Hinges 125mm with stainless steel screws - 3 nos per leaf (b) Stainless Steel (304 Grade) Finished Square Tower Bolt 200mm long - 2 nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos per leaf

S&F powder coated 50 microns extruded aluminium glazing/ doors & shutters made out of section 101.60 x 44.45 x 1.5 mm for chowkats or frame & shutters made of size 85.0 x 44.45 x 1.5mm for side rails and middle rail, 114.3 X 44.45 X 1.49mm for top rails and bottom rails and including 5mm thick ACP sheet (Alstone) below the middle/lock rail and 5mm thick frosted glass above the middle rail and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beads 20mm size with and including required nos of pivots / hinges and brass mortice lock (four levers) and two nos of key complete all as specified and directed including supply and fixing the following items: (a) Stainless Steel (304 Grade) Finished Butt Hinges 150 mm - 3 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 200mm long - 2 nos per leaf (c) Powder Coated Aluminium Handles 150 mm - 2 nos per leaf

Providing and Laying Premium (1st) quality straight edge, stain free, gloss finish, square single charged vitrified tiles in 600x600x 9 to 10 mm thick in floors etc. in approved shade, set & jointed in neat cement including and over 20 mm th screed bed in CM (1:4) and pointed in white coloured cement to match, in floors etc. complete all as specified.

Providing and Laying Premium (1st) quality straight edge, stain free, gloss finish, square single charged vitrified tiles in 600x100x 9 to 10 mm thick in any pattern of light or dark coloured tiles as approved, on vertical surfaces such as skirtings, set & jointed in neat cement including and over 10 mm thick screed bed in CM (1:4) and pointed in white coloured cement to match, in floors etc. complete all as specified.

Providing and Laying Premium (1st) quality straight edge, stain free, satin/matt finish, square, glazed vitrified tiles (GVT) in 600 x 600 x 9 to 10 mm thick in floors / skirtings etc in approved shade set & jointed in neat cement including and over 20 mm thick screed bed in CM (1:4) and pointed in white coloured cement to match, in floors etc. complete all as specified and directed by Engineer in Charge.

Complete removal of existing treatment of any type / description from wall / RCC surfaces / ceiling / chajjas / roof projection etc with mechanical means / grinder complete all as specified and directed by Engineer in Charge.

M&L for preparation of newly plastered surfaces of external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc incl cornices and applying two coats of cement base paint@ 5 sqm/kg/ 1 coat over and including a coat of exterior wall cement primer @ 10 Sqm/litre/1 coat as recommended for under coat by manufacturer of cement based paint by Roller/ brushes complete all as specified and as directed by Engineer-in-charge.

Providing and Laying Premium (1st) quality digitally printed straight edge, glazed ceramic rectangle tile in approved shade and finish in coloured tiles 600 X 300 mm and 8-9 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified.

M&L for Premium (1st) quality straight edge, ceremic tiles 300 X 300 mm and 7 -8mm thick, as in floors etc. in any shade and design/pattern of light & dark tiles as approved/matching with wall tiles , set & jointed in neat cement slurry and pointed in matching colouredpolymer cement based grout to match over and including 20mm thick screed bed in CM (1:4) complete all as specified and directed by Engineer in Charge.

S&F stainless steel tubing of 25 mm dia chromium plated min. 1.0 mm wall thickness as in curtain rod complete incl S&F 02 Nos stainless steel brackets and finials fency type, stops fixed with ss screws etc all as specified & directed as in repair . Note : For the purpose of mesurement and payment running length of curtain rod only shall be considered.

S&F vitreous china premium/1st quality wash basin (under counter) white/ivory/off white size 580x430 mm ,including all accessories as recommended by manufacturer incl. CP bottle trap 32 mm with inlet and outlet screwed for pipe or connections incl all necessary accessories for fixing, packing, union and incl 32mm brass CP waste coupling and fixed in position in all respect as per manufacturer's instructions and taking down existing of any description/size all as specified and directed by Engineer in Charge.

S&F vitreous china premium/1st quality wash down water closet wall hung EWC P trap white including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe and including plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing,including 100 mm dia cast iron sanitary connections, short connections pipe of length upto 600 mm and cutting holes in or through wall, packing with PCC 1:2:4 complete and taking down existing of any description/ size complete all as specified and directed by Engineer in Charge.

S&F Concealed flushing cistern of PVC 10 ltr. cap. with dual flushing system, valveless syphonic action type, with inlet/outlet ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories as recommended by manufacturer for fixing, packing and including actuator knob / flush plates and making space / cavity in existing brick work wall for fixing and taking down existing of any description / size complete in all respect all as specified.

S&F health faucet with 8 mm dia and 1.2 metre long flexible tube in chrome finish and wall hook including making connections and fixed in position complete all as specified and directed by Engineer in Charge.

S&F 6mm thick looking mirror with smooth finish bevelled edges/sides fixed to wall with stainless steel brackets/plugs/connecter/spacers/ screws etc. chrome finish complete fixed in position all as specified and directed.

S&F Bib taps, CP, fency type long body with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete in all respect all as specified.

S&F Stop valves, fancy type, CP with long shank and cup ( concealed type ), exposed part kit with wall flange and regular body of concealed stop cock suitable for 15mm line with protection cap fixed in position complete in all respect all as specified.

S&F Angular Stop Cock with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete in all respect all as specified.

S&F Stainless Steel Towel Rack 600 mm long with lower hangers including all accessories as recommended by manufacturer for fixing and fixed in position in all respect and taking down existing of any description / size complete all as specified and directed by Engineer in Charge.

S&F Sink Cock wall mounted with swinging spout and with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete all as specified and directed.

S&F Single liver 3-inlet divertor consisting of exposed parts kit with operating lever, wall flange and button and concealed body for 3-inlet single lever divertor with button assembly, cartidge sleeve and also including spout with wall flange chromium plated, screwed down high pressure complete all as specified and directed by Engineer in Charge.

S&F stainless steel sink with drainage board, AISI 304 quality grade, 1.00 mm thick, glossy finish, for kitchen with plugs washers and CP waste coupling/round strainer of 110mm dia and including cantilever cast iron brackets, connecting union, etc, overall size 914mm x460mm x 203 mm with bowl size 405 x 354 x203 and making good disturbed portion in CM 1:3 or PCC 1:2:4 as directed.

S&F stainless steel plate racks, glossy finish, for kitchen overall size 900mm x 600mm complete fixed in position as recommended by manufacturer with SS screws/fasteners etc all as directed.

S&F cockroach trap gratings AISI-304 of size 150X150mm square in shape with 5mm border complete in all respect all as specified.

Repair to RCC sunshades, Chajjas, Balconies, Columns, bands, beams and similar RCC work at any position/height by dismantling loose/disintegrated portion and dubbing out with Cement Concrete 1:1½:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished to required shape including provision of necessary supports if required and stitching of cracks with mild steel U clamps made out of 8mm dia @ 150mm c/c with inserting concrete block stretcher with cement mortar 1:3 mixed with adhesive chemical (Polymer based) and reinforced with PVC chicken mesh including form work & scaffolding where ever required and finished with10 mm thick plastering in CM 1:4 finished even and fair without using extra cement including preparation of surfaces to receive finishes complete all as specified and directed.

M&L for Baroda Green marble, machine cut as in shelves/steps/ landings/ cills/ jambs/skirting/border only in tile flooring and the like works and flooring etc, 15-16 mm thick including bull-nose the exposed sides/lengths, set and jointed in cement slurry over & including screed of 15 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab for fixing on concrete surfaces or with suitable adhesive for fixing on un-polished kota stone slabs/boarding of any type including rubbing, cutting and mirror type granite polishing and including dismantling/demolition complete all as specified. Note : Single piece should be used in steps/cills/jambs/shelves.

M&L for Powder coated 50 micron extruded aluminium frame for fixed typewindows made out of powder coated aluminium section of size 101.60X44.45X1.29 mm comprising of 5 mm thick tinted glass inserted in and including necessary jointing cleats, rubber packing, anodised aluminium snap beading complete fixed to floor and wall by means of cadium plated steel screws complete all as specified and directed by Engineer in Charge.

Providing and fixing factory made extruded aluminium ventilators with 50 micron powder coating of frame of 63.5 X 38.10 X 1.29 mm including 5mm thick frosted glass in lower 55% portion of shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperture in upper 45% portion of shutter and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and complete fixed in all respect as specified.

S&F factory made aluminium 50 micron powder coated grill, opening size 101.6 X 63.5 mm (4"X2½") and of approx weight @ 1.345 Kg/sq.m complete fixed in position in windows in all respect as specified

S&F sheet glass shelf assembly consisting of 6mm thick glass shelf 300 x 300mm as in corners wide with bevelled edges/hatching of edges fixed with stainless steel 'D' bracket fixed and railing complete all as specified and directed.

S&F sheet glass shelf assembly consisting of 6mm thick glass shelf 12 Cm wide and 450mm long with bevelled edges/hatching of edges fixed with stainless steel 'D' bracket fixed and railing complete all as specified and directed.

Taking down existing curtain rods with brackets / stops etc in any description / size / position and refixing the same in position including replacing the screws with stainless steel screws complete all as specified and directed.

S&F stainless steel tubing 25 mm dia chromium plated min 1.00mm wall thickness as in curtain rod complete including 02 Nos stainless steel brackets / finials fency type, stops fixed with stainless steel screws etc complete all as specified and directed.

S&F overhead shower 120mm dia with 225-230mm long brass shower arm with wall flange and incl all necessary accessories as recommended by manufacturer for fixing complete in all respect all as specified.

&F central hole basin mixer with popup waste system and 450 mm long braided hoses, fency type, cast copper alloy, with capstan heads, chromium plated screwed down, high pressure, with long screwed shanks and fly nuts, screwed for 15 mm bore of iron pipe complete all as specified and directed by Engineer in Charge.

M & L for toilet paper holder with flat recessed type stainless steel complete all as specified and directed by Engineer in Charge.

Disconnecting existing tanks of any capacity from 350 to 500 Ltrs, setting aside (or lowering if required) for repairing, cleaning, etc. and hoisting if required reconnecting and S&F tank cover with nut & bolts and 25mm dia brass float valve and 25 mm nipple/union, changing of chuk nuts, socket and re-fixing in position after cleaning the tank complete all as specified and directed.

Taking down rolling shutter, repairing, replacement of broken part / mechanisum etc area exc 25 Sqm and n.exc 35 Sqm and greasing to accessories and refixing the same complete all as directed by Engineer in Charge.

Taking down existing CI pipe of 75 to 100 mm bore and refixing the same including cement joints after cleaning and painting with 2 coats of synthetic enamel paint in any position complete all as specified and directed.

Taking down existing CI fitting of any dia / bore like bends / floor trap / nahani traps / door 'T'/ Fourway junction etc and refixing after cleaning with cement joints and applying two coats of synthetic enamel paint in any position complete all as specified and directed.

S&F 18 mm thick with min density 600 Kg/cu.m LEAD FREE PVC Celuka ply of both side plain white colour fixed with screws, solvent cement/ adhesive to make kitchen/bed rooms cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed.

S&F 18 mm thick with min density 600 Kg/cu.m LEAD FREE PVC Celuka ply of single side rigid laminate of approved colour and other side plain white colour fixed with ss screws and solvent cement/ adhesive to make kitchen cabinet, cupboard shutters and shelves complete as per manufacturer’s instructions complete all as specified and directed.

S&F 12 mm thick LEAD FREE PVC Celuka ply fixed with ss screws and solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per manufacturer’s specifications complete all as specified and directed.

S&F 5 mm thick with min density 600 Kg/cu.m LEAD FREE PVC Celuka ply of single side rigid laminate of approved color and other side plain white colour and pasted with solvent cement/ adhesive on frame work of cup boards complete as per manufacturer’s instructions complete all as specified and directed.

S&F 6 mm thick with min density 600 Kg/cu.m LEAD FREE PVC ply fixed with ss screws and solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per manufacturer’s specifications complete all as specified and directed.

S&F auto closing hinges 35 mm of 0 crank( KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position all as specified.

S&F Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs,

S&F tower bolts 250mm long of stainless steel 304 finished/of outer plate metal matt finished complete fixed in position all as specified.

S&F tower bolts 200mm long of stainless steel 304 finished/of outer plate metal matt finished complete fixed in position all as specified.

S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 200mm long matt finished complete fixed in position all as specified.

S&F Piano/continuous hinge of size 19 mm stainless steel complete all as specified.

S&F ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturer's instructions all as specified.

S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150mm long matt finished complete fixed in position all as specified.

S&F Chain Link MS galvanised fencing square mesh of size / nominal pitch of wires 75 x 75mm (3" x 3"), dia of wire 3mm including line wires, including provision of binding wire complete all as specified and directed.

S&F Stainless Steel 304 grade wire Basket (avg. wait 2.5 to 4 Kg. per basket) of pull out type like plain/cup&saucer/bottle/multi purpose/2-3 shelf baskets etc. for kitchens of required suze complete fixed in position all as specified.

S&F wardrobe tube/hanging rod for CB of size 30X15mm and 0.6mm thick stainless Steel 304 grade rectangular high gloss finish complete fixed in position incl S&F brackets/screws etc. all as per manufacturer's instructions all as specified.

S&F stainless steel finished locks (double action) with 2 nos of keys min outer body size 75mm suitable for wardrobes/CB etc. complete all as specified.

Taking down existing brackets / posts of any MS section / angle iron from PCC straightening / making the required shape including making / cutting hole for PCC hold fast of size 230 x 230 x 200 mm and refixing the existing brackets / posts and filling the same with PCC 1:2:4 using 12.5mm graded stone aggregate complete all as specified and directed by Engineer in Charge.

S&F PVC (SWR) rain water pipes 200mm dia, single socketed in any length with rubber ring joints fixed to wall with and including stack clamps made out of 40mm by 3mm FI and 12mm dia round iron stays and making good disturbed portion in CM 1:3 to match with surrounding area complete all as specified and directed by Engineer in Charge.

S&F PVC (SWR) bends of 200 mm dia fixed to rain water pipes with rubber ring joints complete all as specified and directed by Engineer in Charge.

Providing and laying 3mm thick APP (Atactic Polyproplene Polymer) modified prefabricated five layer, weight not less than 4.0 Kg/Sqm water proofing membrane black finished, reinforced with non-woven polyster matt make as approved including of a coat of bitumen primer @ 0.40 ltr/sq.m by the same membrane manufacturer of density 0.87 to 0.89 Kg/Ltr at 25 degree C temperature and viscosity 70 - 160 cps Over the coat, 3mm th 5 layered APP membrane shall be laid using butane torch and sealling all joints etc after the surface complete as per standard practice as per manufacturers instructions. The vital physical and chemical parameters of the membrane shall be as under - (i) Joint strength inlongitueinal and transverse direction at 23 degree C as 650/450N/5cms (ii) Tear strength in longitudinal and transverse direction as 300 / 250 N/. Softening point of membrane not less than 150 degree C Cold flexibility upto 20 degree C when tested in accordance with ASTM (D05147) (iii) The laying of membrane shall be got done through the authorised applicator of manufacturer of membrane only all as specified and directed.

M&L for factory made, unreinforced precast cement concrete tiles of size 250mm x 250mm x 22-25mm machine pressed as on roof surface conforming to IS 1237-1980, laid over and including 15mm thick screed bed in CM 1:4 including mixed with WPC (WPC shall be paid separately) set and pointed with grey cement slurry complete all as specified and directed by Engineer in Charge.

Demolition of reinforced cement concrete of any description / size as in water storage tank of any size / capacity / description / position located on terrace of the single / double storeyed buildings including removing the demolition portion to low lying area or out of defence land all as specified and directed by Engineer in Charge.

S&F LED batten Tube Light fitting LED type retrofit T-8, 20 Watt, 4 Ft long including LED tube rod, 3 core flexible wire 0.5 Sqmm copper cable including taking down old unserviceable tube light fitting of any description all as specified and directed.

S&F LED batten Tube Light fitting 1 x 9/10 Watt, 2 Ft long including LED tube rod, 3 core flexible wire 0.5 Sqmm copper cable including taking down old unserviceable tube light fitting of any description all as specified and directed.

S&F bulk head fitting LED type including 1 x 9/10 Watt LED lamp with 3 core flexible wire 0.5 Sqmm copper cable including taking down old unserviceable tube light fitting of any description all as specified and directed.

S&F LED Security light fitting 30 - 35 watt, complete with all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Engineer in Charge.

Hanging only ceiling fan after necessary point wiring complete all as specified and directed by Engineer in Charge.

S&F LED bulb 7 watt complete all as specified and directed by Engineer in Charge.

S&F exhaust fan 225 mm sweep complete all as specified and directed by Engineer in Charge.

S&F exhaust fan 300 mm sweep complete all as specified and directed by Engineer in Charge.

S&F geyser 25 Litre capacity complete all as specified and directed by Engineer in Charge.

Metal flush boxes mounting 8 module made of MS chromium plated complete all as specified and directed.

S&F earth metal plug with MCB 32 Amp complete all as specified and directed by Engineer in Charge.

S&F earth metal plug with MCB 20 Amp complete all as specified and directed by Engineer in Charge.

Labour only for making of grooves of size 4-5 mm wide and 2-3 mm deep on steps of baroda green / kota stone or of any description with hand cutter / grinders complete all as specified and directed by Engineer in Charge.

S&F MCCB DB VTPN 4 way double door 415 volts with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting type, drilling holes for incoming and out going cables complete with IP-42 all as specified and directed by Engineer in Charge.

Arneja Builders

Karishan Kumar goel

Swami Engineers

KG BUILDERS

Shree Construction Co.

Kartik Builders

DELTA CONSTRUCTION CO