Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹92.2 LAccepted-AOC | L1 | Accepted-AOC Responsive | |
| 2 | L2₹92.2 L+₹1,000 (0.01%)Rejected-AOC C O LT BAPURAM HAZARIKA WARD NO 4 PHUKAN NAGAR P O P S DERGAON GOLAGHAT ASSAM PIN 785614 | DERGAON | GOLAGHAT | ASSAM | 785614 | L2 | Rejected-AOC Responsive | |
| 3 | L3₹92.2 L+₹1,500 (0.02%)Rejected-AOC | L3 | Rejected-AOC Responsive |
Tender Value
₹92.2 L
EMD Value
₹1.8 L
Closing Date
30 Sept 2022, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SE, PWD, Jorhat Building Circle, Jorhat
O/O SE, PWD, Jorhat Building Circle, Jorhat
Construction of three storied office cum market building of Dergaon Municipal Board
2022_PWBNH_26990_1
SE(B)JHT/C/S/S-3/22-23/1176
Open Tender
Civil Works - Building
Item Rate
540 days
Dergaon Municipal Board Office Dergaon
Please refer Tender documents.
6 documents required · 6 mandatory
₹1,840
₹1.8 L
Yes
O/O SE, PWD, Jorhat Building Circle, Jorhat
9 Mar 2023
16 Sept 2022
1 Oct 2022
16 Sept 2022
30 Sept 2022
16 Sept 2022
26 Sept 2022
180 days
Amount
Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified Upto a depth of 2.00 m below the existing G.L. In ordinary soil..
Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete.(a).Brick on flat soling.
Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). In prop. 1:3:6 (1 cement:3 coarse sand : 6 coarse agg. by volume (using mixture machine)
Cement plaster skirting with cement mortar in prop. 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement including rounding of junctions with floor. (a) 15 mm thick
Providing precast R.C.C slab over drain ,septic tank etc. in prop. 1:2:4 reinforced with 10mm M.S. bar @ 150mm centre both ways tying with 20 gauge black annealed wire with necessary shuttering , curing etc. complete including fixing in position as directed. a) 100mm thick slab
Plain cement concrete apron in prop 1:4:8 with 20mm down graded coarse agg. Over soling including neat cement finish using cement slurry 2.75Kg. of cement per sq.m. of floor (soling to be measured separately). (b) 50mm thick
Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using Mixer Machine (A) In substructure up to plinth level Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, N) Without using admixture, plasticiser a) M15 grade concrete or Prop. 1:2:4
(B) Super structure from plinth level up to 1st floor level. ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, c) M25 grade concrete
Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (a).Brick on flat soling.
Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. (I) In Sub-structure upto plinth level including dewatering if necessary (c) In proportion 1:5.
112mm thick 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in superstructure above plinth level up to 1st floor level. In cement mortar in proportion 1:4.(1 cement:4 sand) a) In prop. 1:4
Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls). a) Normal range( Sizes 200mm x 200mm and above) d) Johnson made
Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. b) ISI approved super ductile TMT bar ii) TATA/SAIL
15 mm thick cement plaster in single on on rough side of single or half brick walls for interior plastering up to 1st floor level including arises, internal rounded angles,chamfers and/or rounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed. (b) In prop. 1:4 G.F & F.F
15 mm thick cement plaster in single on on fair side of single or half brick walls for interior plastering up to 1st floor level including arises, internal rounded angles,chamfers and/or rounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed. (b) In prop. 1:4 G.F & F.F
20 mm thick Cement plaster in two coats on single or half brick walls for interior plastering up to 1st floor level including arises, internal rounded angles,chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed. (b) In prop. 1:4
Extra over item no 6.2.1to 6.2.5 for interior plastering above 1st floor level for every addl floor or part thereof including curing complete as directed. a) On Single coat plaster 2nd floor
Providing wood work in frame (chowkaths) of doors, windows, clerestory windows and other similar works wrought, framed and fixed in position in contact with C.C or brick masonry wall including supplying, fitting and fixing with M.S. hold fast (40mmx3mmx250mm) as per design embeded in cement concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified. (b) With 1st class timber (Bonsum/ Sundi)
Providing fitting and fixing Godrej SS 304 grade railing with pipes/glass for different staircase, cutious areas, balcony etc. with complete installation, acrylic finish etc. which is fitted with mid pipes and top pipes of good quality steel etc (c) Acrylic Railing with wire Indound Locator
Providing, fitting and fixing factory made Santro Flush door shutters having core & cross bands fabricated from seasoned 1st class timber, 25mm core battens, 2.5mm to 3.5mm uniformly thick cross bands, styles & (b) 35mm thick
Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 2nd floor level) (b) ISI approved Super Ductile (SD) TMT Bar ( i )TATA/SAIL
Providing two coats of J.K Wall Putty ( White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm)
Providing, fitting and fixing factory made wooden panelled doors with panel inserts of 75mm to 50mm width and 12mm to 20mm thickness,joined together with continous tongue and groove joints glued together with Movicol or other approved adhesive leaving a vertical groove of 7.5mm to 15mm between the inserts,the edges of panel inserts being feather tongue into styles and rails including providing three pairs of oxidised M.S butt hinges (100mm x75 mm x3.55mm) and furnishing with moulded timber beading of size 25mmx15mm around the panels complete as per drawing (moulded timber bead and all fittings except hinges to be paid separately) (ii) 35 mm thick with panel inserts of 20mm thickness.
Providing and fixing in position collapsible M.S. shutters with vertical channels 20mmx10mmx2mm braced with flat iron diagonals 20mmx5mm size with top and bottom rails of T-iron 40mmx40mmx6mm with 38mm dia steel pulleys complete with bolts and nuts, locking arrangements, stoppers, handles including applying a priming coat of red lead paint.
Providing and fixing rolling shutters of approved make made of 80mm wide M.S. laths interlocked together through their outside locking with push-pull operation complete including cost of wire, spring and hood cover for the shutters.
Providing, fitting and fixing PVC Door shutters of 37mm (single panel seamless finish) of Syntex make, at all levels made of extruded sections in the configuration of 'A'.The overall dimension is 37mm x 90mm, with usual process variation having a wall thickness of 2mm with a variation of +0.03mm provided with all plastic reinforcement to avoid rusting. The shutter frame is mitred and joined at the corners by means of stainless steel screws.The corners of the shutter frame are being reinforced by polymeric reinforcement of the size 125mm x 250mm and the lock rail is reinforced by 45 x18 x255 size reinforcement etc.
Providing, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ openingwith M.S. flats at required spacing in frame all round, squre or round M.S. bars with round headed bolts and nuts or screws. (ii)Plain grill (a) Fixed to wooden frames
Cement concrete works in topping 1:1:2 (1cement :1sand :2 graded aggregates on R.C.C floor, tread and rise of steps finished with a floating coat of neat cement using cement slurry for bond @ 2.75 kg.of cement per sq. m. of floor to be laid in panels including curing complete as directed.
Supply, Installation, Fixing of ABC Stored Pressure Fire Extinguisher with built – In pressure Gauge to know the Ready ness of the Extinguisher Squeeze Grip Handle As per IS:13849 with ISI mark (05 kg capacity) BRAND : FIRESTOP / FIREND / FIRE SHIELD
Supplying fitting and fixing G.I. Pipes of following sizes, with all necessary 'R' brand or similar approved G.I. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, H.W. clamps etc.complete at all levels including below G.L. as directed and specified. (I) Exposed on walls a) 50 mm dia i) Using Tata medium
Supplying fitting and fixing G.I. Pipes of following sizes, with all necessary 'R' brand or similar approved G.I. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, H.W. clamps etc.complete at all levels including below G.L. as directed and specified. (I) Exposed on wallsb) 40 mm dia i) Using Tata medium
c) 32 mm dia i) Using Tata medium
d) 25 mm dia i) Using Tata medium
e) 20 mm dia i) Using Tata medium
f) 15 mm dia i) Using Tata medium
Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately) (II) Jaquare make (i) Continental /Clarion Standard (ii) Bibcock long thread
Supplying fitting and fixing chrome plated (C.P.) stop-cock of approved brand and size as mentioned below as directed and specified.(G.I. & C.P pipes will be measured and paid separately) I) Jaquar (b) Queen's collection/ The Stealth Ranger (For VIP use. Prior approval of Chief Engineer PWD (Bldg) must be taken before use) (ii) Concealed stop cock with adjustable wall flange
Supplying fitting and fixing Supreme brand and similar approved PVC Pipes of following sizes, with all necessary 'R' brand or similar approved P.V.C. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, clamps etc. complete at all levels including below G.L. as directed and specified. (A) Exposed or in trenches a) 50 mm dia
Providing fitting and fixing vitreous china pedestal type water closet (European type W.C pan 400mm high ) with seat and lead ,CP brass hinges and rubber buffers, 10 litre low level white china vitreous flushing cistern with fittings, CI/MS brackets, 40mm dia flush band with fittings including painting of fittings and brackets,cutting and making good to the walls and floors wherever required. b) Coloured
Providing fitting and fixing Vitreous china flat back type lipped front urinal basin (455x360x267) mm of Parry ware/Cera with automatic flushing cistern of similar colour and standard flush pipe and CP brass spreader with brass unions etc. complete including painting of fittings and brackets, cutting and making good to the walls and floors wherever required. iv) For range of 4 No. urinal basin with 10 ltr. Flushing cistern.
Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes C) 1000 Lt capacity (i) Sintex make
Providing fitting and fixing vitreous water closet squatting pan (Indian type W.C Orissa pattern) of size 580x440mm with 100mm SCI 'P' or 'S' trap, 10 litre low level PVC flushing cistern with manually controlled device (Handle lever) of Parry ware/Hind ware make with all fittings and fixtures complete including cutting and making good to the walls and floors wherever required. b) Coloured
Providing fitting and fixing vitreous china pedestal type water closet (European type W.C pan 400mm high ) with seat and lead ,CP brass hinges and rubber buffers, 10 litre low level white china vitreous flushing cistern with fittings, CI/MS brackets, 40mm dia flush band with fittings including painting of fittings and brackets,cutting and making good to the walls and floors wherever required. b) Coloured
Providing fitting and fixing Vitreous china flat back type lipped front urinal basin (455x360x267) mm of Parry ware/Cera with automatic flushing cistern of similar colour and standard flush pipe and CP brass spreader with brass unions etc. complete including painting of fittings and brackets, cutting and making good to the walls and floors wherever required. iii) For range of 4 No. urinal basin with 10 ltr. Flushing cistern.
Providing vitreous China wash basin of size 630mmx450mm of Hindware with CI/MS brackets,32mm C.P brass chain with plug,PVC waste coupling of standard pattern, C.P stop cock, C.P brass chain with plug, PVC waste pipe including painting of fittings and brackets, cutting and making good thewalls wherever required. b) Coloured vitreous China wash basin of size 630mmx450mm
Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia.
Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches .(iv) 75mm dia.
Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining ,fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia.
Supplying fiting and fixing 87.5 degree PVC bend with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia.
Supplying fiting and fixing 87.5 degree PVC bend with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia.
Labour for boring hole for inserting tube well pipes through different soil/ rock media including hire charges of drill pipes, scaffolding, tools and plants as necessary and taking out the same and lowering pipes, fittings complete as directed by the Department. Bore hole of 150mm diameter
Supplying, fitting and fixing pipes plain/bevel ended for casing, conforming to relevant IS codes of practice including supplying and fitting of tube well accessories, lowering of assembly pipes concentrically in the borehole followed by supplying and packing of pea gravel free from dirt, dust and other foreign materials in the annular space between the borehole and assembly pipes complete as directed by the Department. G.I. pipe a) TATA / SAIL (Medium) socket should be welded to the pipes. iv) 100mm diameter
Supplying, fitting and fixing pipes plain/bevel ended for casing, conforming to relevant IS codes of practice including supplying and fitting of tube well accessories, lowering of assembly pipes concentrically in the borehole followed by supplying and packing of pea gravel free from dirt, dust and other foreign materials in the annular space between the borehole and assembly pipes complete as directed by the Department. I) G.I. pipe a) TATA / SAIL (Medium) socket should be welded to the pipes. i) 50mm diameter
Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes A) 2000 Lt capacity (i) Sintex make
Labour for erecting and placing the G.I. Tank over the stagging up to a height of 5.00m complete as directed. a) 2000 Lt capacity
Wiring to a light point with 1.5 sq. mm PVC. insulated unsheathed 1.1KV. grade (R.R Keble/Finolex/Havells Make) as approved by this department single core copper conductor cable in Recessed PVC. conduit wiring system with 20 mm. dia., 2 mm thick rigid P.V.C. conduit including 6 Amps flush type switch (Anchor/Kolors Kany.com. Make), in iron clad switch board (I.S.I. marked) with phenolic laminated sheet cover, ceiling rose etc.complete. i)Medium point upto 6.00 metre length
Wiring to a light point with 1.5 sq. mm PVC. insulated unsheathed 1.1KV. grade (R.R Keble/Finolex/Havells Make) as approved by this department single core copper conductor cable in Recessed PVC. conduit wiring system with 20 mm. dia., 2 mm thick rigid P.V.C. conduit including 6 Amps flush type switch (Anchor/Kolors Kany.com. Make), in iron clad switch board (I.S.I. marked) with phenolic laminated sheet cover, ceiling rose etc.complet ii)Long point upto 10.00 metre length.
Wiring as in item no. 72 above in Recessed PVC. Conduit wiring system with 20 mm. dia, 2 mm thick, rigid P.V.C. Conduit to a Fan/exhaust Fan point including 6 Amps flush type (Anchor/Kolors Kany.com. Make) switch, ceiling rose I.C. switch board with phenolic laminated sheet cover as required complete. i)Medium point upto 6.00 metre length
Wiring as in item no. 72 above in Recessed PVC. Conduit wiring system with 20 mm. dia, 2 mm thick, rigid P.V.C. Conduit to a Fan/exhaust Fan point including 6 Amps flush type (Anchor/Kolors Kany.com. Make) switch, ceiling rose I.C. switch board with phenolic laminated sheet cover as required complete. ii)Long point upto 10.00 metre length.
.Wiring to 5 pin 6 Amps plug with 1.5 sq. mm PVC. insulated unsheathed single 1.1 K.V. grade ISI marked (R.R Kable/Finolex/Havells Make) single core copper conductor cable in Recessed P.VC. conduit wiring system including 5 pin 6 Amps flush type plug socket and 6 Amps F/T switch (Anchor/Kolors Kany.com. Make), I.C. switch board (I.S.I. marked) with phenolic laminated sheet cover including earth continuity with 2.5 sq. mm. PVC. insulated unsheathed single core copper conductor cable to third pin of the plug socket etc. as required complete with 20 mm. dia. rigid PVC. conduit pipes when placed elsewhere. Long point upto 10.00 metre length.
Wiring as in item no. 65 when fixed on the same board In Recessed PVC. conduit wiring system on the recessed I.C. switch board.
Wiring for twin control light point with 1.5 sq. mm. PVC. insulated unsheathed copper conductor cable (R.R Kable/Finolex/Havells Make) in recessed 20 mm. dia, 2.00 mm thick PVC. conduit with 2-way 6 Amps F/T switch (Anchor/Kolors Kany.com. Make), I.C. switch board with phenolic laminated sheet cover ceiling rose including connection etc. as required. Long point upto 10.00 metre length.
.Wiring for 5 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated unsheathed I.S.I. marked single core copper Conductor cable (R.R Kable/Finolex/Havells Make) in Recessed P.V.C. conduit wiring system including providing and fixing 5 pin 16 Amps flush type socket outlets (Anchor Make) and 16 Amps flush type switch (Anchor/Kolors Kany.com. Make), I.C. switch board (I.S.I. marked) with phenolic laminated sheet cover earth continuity with 2.5 sq. mm PVC. insulated unsheathed single core copper conductor cable to the 3rd pin as required complete with 20 mm. dia, 2 mm thick rigid P.V.C. Conduit pipes. Extra long point upto 20.00 metre length
Extra long point upto 25.00 metre length
Wiring for circuit wiring with P.V.C. insulated unsheathed 1.1 K.V. grade (I.S.I marked, R.R Kable/Finolex/Havells Make) single core copper conductor cable in Recessed PVC conduit wiring system With 2 x 1.5 sq. mm. P.V.C. insulated single core copper conductor cable in 20 mm dia, 2.0 mm thick rigid P.V.C. conduits.
.With 2 x 1.5 sq. mm. P.V.C. insulated single core copper conductor cable in 20 mm dia, 2.0 mm thick rigid P.V.C. conduits. With 2 x 2.5 sq. mm. + earth continuity with 1x2.5 sq. mm. PVC.insulated unsheathed single core copper conductor cable in 20 mm. dia., 2 mm thick Rigid P.V.C. Conduit pipes.
With 2 x 6 sq. mm. + earth continuity with 1x4 sq. mm. PVC. insulated unsheathed single core copper conductor cable in 20 mm. dia., 2 mm thick. Rigid P.V.C. Conduit pipes.
Wiring as in item no 72 above. With 3 x 6 sq. mm. + earth continuity with 1x4 sq. mm. PVC. insulated unsheathed single core copper conductor cable in 25 mm. dia, 2 mm thick, rigid PVC. Conduit pipes.
With 3 x 10 sq. mm. + earth continuity with 1x4 sq. mm. PVC. insulated unsheathed single core copper conductor cable in 25 mm. Dia, 2 mm thick, rigid PVC. Conduit pipes.
With 3 x 16 sq. mm. + earth continuity with 1x6 sq. mm. PVC. insulated unsheathed single core copper conductor cable in 32 mm. Dia, 2 mm thick, rigid PVC. Conduit pipes.
Supplying and fixing bulk head fitting suitable for 20 watts CFL. lamp complete with all accessories including connections etc. as required complete including 20 watts CFL Lamp as directed and specified by the Department.
.Installation of Earth stations with necessary Earth plate including providing all accessories masonary enclosure with cover plate having locking arrangement and 20 mm. dia. G.I. pipe, watering pipe with funnel, G.I. bolts, nuts, checknuts etc. but without Charcoal or coke and salt as required including excavation work and refilling complete. With 600 mm x 600 mm x 3 mm. Thick (10.5 Kg. approx.) Copper earth plate.
Extra for Charcoal (96 Kg.) and salt (5 Kg.) for G.I. /Copper plate earth electrode as required complete
Providing and fixing 25 mm x 4 mm. Copper Strip on surface or in recessed fitted with necessary Copper Saddles including connection etc. complete.
205.Providing and fixing of lightning Conductor finial made of 25 mm. dia. 300 mm. long Copper tube having single prong at top with 85 mm. dia. 3 mm. thick Copper base plate including making hole and fitted with 6 mm. dia. rag bolts & nuts.
Supplying including fitting fixing of A.C. Exhaust fan in the existing hole on the wall of follwing sweeps and making necessary connections etc. as required complete and as directed by the Department. a(ii)300/305 mm sweep
Supplying including fitting fixing of Electronic STEP Type Regulator for ceiling fan complete with all connections in the existing board as required complete and as directed by the department.
(MCB).Supplying including fitting & fixing 1200 mm Sweep AC ceiling Fan Delux Model [EURO White] [Bajaj Make] comlete with connection as directed & specified by the department..( Without Regulator) .
.(FAN)Supplying including fitting & fixing 1200 mm Sweep AC ceiling Fan Delux Model [EURO White] [Bajaj Make] comlete with connection as directed & specified by the department..( Without Regulator) .
.Supplying including installation, commissioning of vermin and dust proof (IP-43 protection) totally enclosed double door cubical type compartmental floor mounting panel board of size 1.20 M (B) x 1.20 M (H) x 0.40M (0) made of 16 SWG (1.66MM) thick C.R. sheet and 30mm x 30mmx5mm size angle having 4 nos legs at the bottom and C.R. sheet roofing on the top complete painting with 2 coats of Red Oxide metal primer and 2 coats of Enamel paint. The panel board is to be errected in 1 :3:6 PCC foundation including excavation of trench and brick soling etc. complete neatly wiring done with provision for one no 4 pole MCCB as incomer and provision for 6 nos DP or 4 Nos TPN out going as specified and directed by the deptt.comprising of the fbllowing electrical items:
Supplying including installation, commissioning of vermin and dust proof (IP-43 protection) totally enclosed cubical type compartmental floor mounting panel board of size 1.20 M (B) x 1.20 M (H) x 0.40M (D) made of 16 SWG (1.66MM) thick C.R. sheet and 30mm x 30mmx5mm size angle having 4 nos legs at the bottom and C.R. sheet roofing on the top complete painting with 2 coats of Red Oxide metal primer and 2 coats of Enamel paint. The panel board is to be errected in 1 :3:6 PCC foundation including excavation of trench and brick soling etc. complete neatly wiring done with provision for one no 4 pole MCCB as incomer and provision for 6 nos DP or 4 Nos TPN out going as specified and directed by the deptt.comprising of the fbllowing electrical items:
Supplying with fitting and fixing Single Pole 10 KA 240/415 V 50 Hz MCB of the following capacity complete with necessary connection as specified and directed by the deptt.
Supplying with fitting and fixing SPN 10 KA 240/415 V 50 Hz MCB of the following capacity complete with necessary connection as specified and directed by the deptt. 40 Amos
Supplying with fitting and fixing 4 Pole 10 KA 415V 50Hz MCB Conform to IS/IEC 60898-1:2002 of the following capacity complete with making necessary connection as specified and directed by the deptt. 63 amps
.Supplying with fitting and fixing panel mounting open execution 25KA 415V 50Hz 4P MCCB (Ics=Icu, adustable Ir setting 0.7-1) (without enclosure) of the following capacity complete with making necessary connection as specified and directed by the deptt. 63 A
Supplying with fitting and fixing panel mounting open execution 25KA 415V 50Hz 4P MCCB (Ics=Icu, adustable Ir setting 0.7-1) (without enclosure) of the following capacity complete with making necessary connection as specified and directed by the deptt. 125 A
Supplying with fitting and fixing sheet steel,phosphatised, powder painted double door surface mounting TPN MCB DB (IP-43 protection) incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. Complete with making necessary connection as specified and directed by the deptt. [Legrand/Merlin Gerin/ Hagger make] b) 8 way TPN (8+24) double door
Supply and laying of following size PVC/XLPE.insulated and PVC sheathed 11 KV gd aluminium conductor LT armoured UG. cable laid in ground/partially in air (10.0% of cable length) including excavation af cable trench upto depth of 75cm, refilling, protective brick covering, sand cushioning etc. complete handling of surplus spoil, debries etc. to proper place as specified and directed by the deptt. d.70.00 mm2 3&1/2core U.G. Cable
Supply.and laying of following size PVCIXLPE insulated and PVC sheathed 11 KV gd aluminium conductor LT armoured U.G. cable laid in pucca flooring road crossing, drain crossing and partially in air through G.!. Pipe (TatalNezone make) with necy bend and socket including excavation and refilling the treance and making good damange done as specified and directed by the deptt. d.70,00 mm2 3&1/2core u.G. Cable in 50mm dia medium quality G.!. Pipe'
Supplying with fitting & fixing of 1 x 70 Watt HPSV integral type street light luminaire consisting of single piece integral epoxy gray powder coated dia cast alluminium housing gasket, pot optic relector, cast alluminium frame from heat resistance toughened clear glass cover and accessories such as Condenser, lamp Holder, Balast, 250 Watt HPI MH lamp etc. including making necessary connection with 2× 2.50 sq.mm F.R. multistand and P.V.C. insulated single core copper cable as specified and directed by the department.
Supplying including fitting and fixing of Hot Dip galavanised arm bracket for installation of luminaires as required and directed by the Department. a) Single arm bracket 1000mm long for 3m to 10 mtr. Poles.
Supplying, installation, testing and commissioning of the following prewired CFL/Flourescent luminaries complete with all accessories such as ballast, starter etc. directly on wall/ceilling including connection with 1.5 sq. mm PVC insulated single core copper conductor as reqd. and as directed by the Deptt. e[i] Box type decorarive luminaries complete with copper ballast, arcylic diffuser and 1x36/40 watt. Flouescent tube.(Bajaj make) Model- BJSRP136/140WEB
.Supplying, installation, testing and commissioning of the following T5 luminaries complete with all accessories such as ballast,starter etc. in the ceiling including supplying nut, Y type suspention arrangement as specified, with MS rod of 4mm dia. including connection with 1.5 sq mm P.V.C. insulated S.C.copper conductor d.TPH 824/228 D8 DI HF 2 x TL5 28W 240 V Philips MakeSereno D8 Micro-Optics based luminaire suitable for suspension from ceiling/ Horizontal wall mounting. Direct-Indirect lighting luminaire designed for high efficiency and energy savings.
.Supplying and erection of stay set complete (Galvanized) with 19mm dia x 1.8m long stay rod, anchor plate of size 30cm x 30cm x 6.4mm thimble stay clamps turn buckle (19mm x 60cm) 7/4.00mm dia G.I. stay wire and strain insulator etc. in cement concrete 1:3 :6 foundation including excavation and refilling etc. as required.
.Supplying and erection of channel iron 100 mm x 50 x 1.25 m length having weight of 7.9 Kg./M cross arm for 4 wire overhead line complete with clamps, bolts nuts etc as required
.Supplying and erection of PSC pole 9.75 mtr long, the pole is to be erection in 1:3:6 plain cement concrete foundation of size 1.50 m x 0.45m x 0.45m having P.C.C.base foundation above 15cmx60cmx60cm including edge brick soiling and plastering G.L. portion (0.30 mtr) complete with excavation of earth, handling of surplus soil, debris etc. to the proper place and refilling etc. as specified and directed by the deptt.
.Supplying and erection of all aluminum conductor steel reinforced (AC.S.R) of size 7/5.28 mm dia with erection including binding etc. as required (wt/Km=493 Kg)
Supplying, installation testing and commissioning of the following capacity, Alluminium Wound outdoor type sub station complete with transformer, H.T./ L.T., side fittings and all other following accessories as required complete including Payment of ASEB's suprevision charge,labour charge, cost of ASB's Materials like metering equipment,Ct/Pt set etc.(Excluding Payment of Load Security) arrangement of charging approval of Sub-Station from Chief Electrical Inspectorater and consisting of the followings : (The cost of fencing and transformer pad as per rwquiremennt will be paid extra) b) 25 KVA, 11/0.433 KV, vector group DYN-11 alluminium wound transformer
Supplying installation and commissioning of vermin and dust proof totally enclosed single door cubuical type compartmental floor mounting Metering Cabinet of size 1.00 m ×1.00 m ×0.50 m made of 16 SWG (1.66mm) thick CR sheet and 35 mm × 35 mm × 6 mm size angle and 35 mm ×6 mm flat iron having 4 nos legs at the bottom and G.I. Sheet reefing on the top complete painting with 2 coats of red oxide metal primer and 2 coats of enameled paint. The panel board is to be erected in 1:3:6 RCC pole foundation including excavation of trench and brick soling etc. complete neatly intemal wiring done as specified and directed by the department comprising of the following electrical items. (UPTO 125 AMP)(MCCB incomer and meter will be be measured and paid seperately)
Supllying fitting & fixing DEFLAME brand dry camical powder type fire extinguiser complete as required and directed by deptt.
Payment to be made to the APDCL athuority for load sequirty and meter sequirty.
BIPIN HAZARIKA
Manash Boruah
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .