Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.6 LQualified PROP DHINGRA BROTHERS INDIA POST OFFICE HAZARA VILLAGE DHADDA OLD HOSHIARPUR ROAD JALANDHAR PUNJAB PUNJAB 144001 | JALANDHAR | PUNJAB | 144001 | L1 | Qualified MSE, MII, Category: General | |
| 2 | L2₹7.8 L+₹14,365 (1.89%)Qualified | L2 | Qualified MSE, MII, Category: General | |
| 3 | L3₹7.9 L+₹28,730 (3.77%)Qualified | L3 | Qualified MII | |
| 4 | L4₹8.3 L+₹71,825 (9.43%)Qualified | L4 | Qualified MSE, MII, Category: General | |
| 5 | L5₹8.5 L+₹86,190 (11.3%)Qualified | L5 | Qualified MII |
Tender Value
₹8.5 L
EMD Value
Exempted
Closing Date
26 Sept 2022, 5:00 pmClosed
ROAD MARKING THERMOPLASTIC PAINT
3799159
GEM/2022/B/2546737
Road marking Thermoplastic paint
15 days
Jammu And Kashmir; Anantnag
Total value wise evaluation
BOQ
Exempted
26 Sept 2022
16 Sept 2022
26 Sept 2022
| Item No | Item Title | Description | Qty | Unit | Consignee | Delivery (days) |
|---|---|---|---|---|---|---|
| 1 | Road marking Thermoplastic paint | Road marking Thermoplastic paint Coulor White Properties The properties of thermoplastic aterial when tested in accordance with ASTM D36 and BS3262 Part I shall be as below Luminance White Daylight luminance at 45 degree minus 65 percent min as per AASHTO M249 Drying time When applied at a temperature specified by the manufacturer and to the required thickness comma the material shall set to bear traffic in not more than 15 minutes Skid resistance not less than 45 as per BS6044 Cracking resistance at low temperature The material shall show no cracks on application to concrete blocks Softening point 102 point 5 degree celcious plus minus 9 point 5 degree celcious as per ASTM D 36 Storage life The material shall meet the requirements of these Specifications for a period of one year The thermoplastic material must also melt uniformly with no evidence of skins or unmelted particles for the one year storage period Any material not meeting the above equirements shall be replaced by the manufacturer or supplier or Contractor Marking Each container of the thermoplastic material shall be clearly and indelibly marked with the following information The name trade mark or other means of identification of manufacturer Batch number Date of manufacture Colour white Maximum application temperature and maximum safe heating temperature Sampling and Testing The thermoplastic material shall be sampled and tested in accordance with the appropriate ASTM or BS method The Contractor shall furnish to the Engineer a copy of certified test reports from the manufacturers of the thermoplastic material showing results of all tests specified herein and shall certify that the material meets all requirements of this Specification | 14,365 | Kgs | Ananthnag | 15 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
bid_3799159.pdf
GEM_BID
specifications_road-marking-paint_2022-09-16-16-44-02_a3ad8bc4e76b7216f697eafe49d7392a.pdf
BOQ
thermoplastic-road-marking-paint_2022-09-16-16-44-02_573567ce2adbe0014e761eb2b8b045ba.csv
BOQ
gtc.pdf
OTHER
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .