Special repair of PHC Badhra in Charkhi Dadri Distt.

Amount

Dismantling brick work, Tile masonary or tile linning & tile terracing in cement (HSR 8.5,b)

Dismantling cement conglemerate/terrazzo floors 25mm to 50 mm thick including concrete base.(HSR 8.25)

Dismantling white or coloured glazed tiles (to be carefully removed)(HSR - 8.38)

Tile teracing with one layer of tiles 22.86 cmx1.43cm x3.81cm laid dry over a layer of mud mortar including grouting with cement sand mortar 1:3 and top surface to be left clean(HSR 13.14)

Providing and fixing in position HCI soil waste vent or antisyphonage pipes in ISI specification of ELC manufacture or of any other reputed firm including cutting and sastage etc and cutting holes in walls roofs or floor etc. and making good to be original condition nut excluding cost of lead joining (a) 100mm i/d(HSR30.84,a)

Providing lead caulked joints to HCI pipe and specials conforming to ISI specification of ELC manufacute or any other reputed firm including cost of lead yarn fuel and tools etc (a) 100mm i/d (1.13 kg)(HSR 30.87,a)

Providing and fixing HCI floor traps ISI marked of the self cleaning design with CP Brass hinged grating with frame with or without vent arm and including cement concete 1:2:4 under and around the floor trap where required upto floor level complete in all respects including cutting and making good the walls and floors etc minimum depth of water should be 150mm with a minimum seal of 50mm (b) with 75mm i/d outlet (HSR 30.89,b)

Providing and fixing in position HCI specials for soil waste vent or anti syphonage pipes to ISI marked inluding cutting and wastage etc cutting holes in walls roofs of floors etc. and making good to its original condition but excluding cost of lead jointing (a) For 100mmi/d pipes(HSR 30.91,a,b) Heal rest bend

Double junction with door100mmx100mm x100mmx00mm

Bend with door

Bend plain

Collar

Providing and fixing HDPE WATER STORAGE TANKS of Sintex, Diplast O.K. Supreme make with covers/ lids marked with IS: 12701 on roof top of buildings including cost of hoisting and placing in position making connections with inlet and outlet pipes providing over flow and scour provisions with suitable plug on scour pipe including cost of nipples washers flanges for connections in tanks complete in all respects to the satisfaction to the Engineer-in-Charge )Except civil work)(HSR 30.119)500 Ltr capacity

1000 Ltr capacity

Labour for laying jointing fixing and testing GI/PVC/WI pipe lines and specials tees bends sockets elbows etc inside building and testing etc complete including cutting threadings IHSR 28.18,a(i) (ii)). (Excluding cost of specials) i) 15mm dia

Cost of pipe

20mm dia pipe

Cost of pipe

E/Work in embankment in involving excavation of earth work in all type of soil or rocks with all lead and lift including dressing in templates after breaking of clods. Also including cost of watering and rolling. The successive layer of earth should not be provided until and unless layer under construction is thoroughly compacted & watered. The complete rate quoted by the contractor shall take into account all allowances for labour hardness, wetness & all kind of carriage, loading unloading, total lead and lift of soil involved to entire satisfaction of Engineer-in-charge confirming fully to specification no. 6.2 & 6.3 of Haryana MoRT&H specification latest edition including subsequent agenda and corrigenda issued from time to time. (NS) av lead 5 km

Providing and laying 150 mm thick granular sub base consisting of filter layer confirming to Table 400.1 Grading - III of MoRT&H 5th edition, mixing in a mechanical mix plant at OMC, carriage of mix material to the site of work, spreading in uniform layer with motor grader on prepared surface and compacting with vibratory power roller to achieve desired density complete as per clause No. 401 of MoRT&H specifications. (NS)

Providing and laying 80mm thick interlocking paver blocks of all shapes and colours in design mix cement M-35 over a bed of 30mm thik fine sand complete in all respect.(HSR 10.159)

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE (to the approval of the Engineer-in-charge), INDIAN TYPE ORISSA OR ORYA WATER CLOSET SUITE for sinking into floor, with raised foot treads COMPLETE WITH 100 MM H.C.I. ‘P’ TRAP with or without vent as required and all OTHER NECESSARY FITTINGS as fully described in item no.30.1 above. (HSR 30.2 b i)

Providing and fixing in position best indian make (as approved by the engineer-in-charge European type water closet suite, syphonic type consisting of- (i) VITREOUS CHINAWARE SYPHONIC SUITE WITH 15 LITRES CAPACITY MATCHING CHINAWARE CISTERN and all internal brass fittings COMPLETE WITH ‘P’ or ‘S’ TRAP with or without vent; (as approved by the Engineer-in-charge). (ii) One piece SEAT AND LID IN HOLLOW BLACK OR WHITE PLASTIC fitted with chromium plated hinges and rubber buffers, (to the approval of the Engineer-in-charge) COMPLETE in all respects INCLUDING CUTTING AND MAKING GOOD THE WALLS AND FLOORS. (b) Double trap syphonic (ii) Single Color. [HSR 30.5 (b) (ii)].

EXTRA OVER item nos. 30.1 to 30.4 and 30.6 FOR PROVIDING AND FIXING 15 LITRES CAPACITY VITREIOUS CHINA HIGH LEVEL CISTERN COMPLETE with internal brass fittings instead of 12.5 litres capacity high level C.I. cistern complete (as approved by the Engineer-in-charge) (i) White (HSR 30.8)

EXTRA OVER item nos. 30.3 to 30.6 FOR PROVIDING AND FIXING BEST INDIAN MAKE PLASTIC HYGENIC SEAT with lid complete instead of hollow Black or white plaster seat and lid.(i) White plastic seat (Solid). [HSR 30.13 (i)].

PPROVIDING AND FIXING IN POSITION BEST INDIAN MAKE A RANGE OF THREE STALL URINALS 1150 MM HIGH IN VITREIOUS CHINAWARE WITH ONE NO. 10 LITRES CAPACITY C.I. AUTOMATIC FLUSHING CISTERN WITH FITTINGS AND FLUSH PIPE COMPLETE as fully described in item no. 30.29 above. (HSR 30.31 i)

Providing and fixing 25 mm thick marble partition for different type of urinals. Small size 680mm x 330 mm Single Color(HSR 30.40 b ii)

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE LAVATORY SUITES (WITH FULL ANTI SPLASH RIM IN VITREIOUS CHINAWARE and all other necessary fittings as fully described in item no.30.41 above. White Size 510 mm X 400 mm with one no tap(HSR 30.42 i)

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE CHROMIUM PLATED BRASS 2ND TAP FOR LAVATORY SUITE. (HSR 30.45)

Providing and fixing in position best quality Stainless Steel Sinks with Complete fittings as fully described in item No. 30.51. (a) 600 mm x 450 mm x 200 mm. [HSR 30.53 (a)].

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE TOWEL RAILS FIXED in with rawlslugs embedded in walls with C.P. brass screws. Complete in all respect INCLUDING CUTTING AND MAKING GOOD THE WALLS ETC. (d) CP Brass two swivel towel rail 400 mm long (HSR 30.68 d)

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE BEVELLED EDGE 5.5 MM THICK MIRROR mounted on ASBESTOS sheet GROUND FIXED IN POSITION BY MEANS OF 4 NOS. CHROMIUM PLATED BRASS SCREWS AND WASHERS over rubber washers and rawl plug embedded in the wall or chromium plated brass clamps with C.P. brass screws (as required by the Engineer-in-charge) COMPLETE INCLUDING CUTTING AND MAKING GOOD THE WALLS ETC. (HSR 30.71 a i)

Providing and fixing in position 15mm i/d C.P. brass bib cocks of best quality (as required by the Engineer-in-charge). [HSR 30.75]. (a) Bib cock long body.

(c) Bib cock

Providing & fixing in position C.P. brass stop cock (as approved by the engineer-in-charge). (a) 15 mm Stop cock. (ii) Concealed stop cock with flange. [HSR 30.76 (a) (i) Stop cock male and female end

(ii) Concealed stop cock with flange

Providing and fixing 15 mm C.P. brass Laboratory cock swan neck of best quality (to the approval of the Engineer-in-charge) two way (HSR 30.78 b)

Providing and fixing in position best Indian make flexible tube connection. (a) aluminium (iii) 15mm x 450 mm. [HSR 30.82 (a) (iii)].

Providing and fixing in position H.C.I. Soil waste vent or antisyphonage pipes to I.S.I. specifications of E.L.C. manufacture or of any other reputed firm including cutting and wastage etc. and cutting holes in walls, roofs or floor etc. and making good to its original condition but excluding cost of lead jointing. (HSR 30.84) (a) 100 mm internal diameter.

Cutting chase in brick wall in cement or in floor for embedding G.I. or H.C.I. pipe lines and making good the same to its original condition. [HSR 30.95 (a)]. (a) Size 75 mm x 75 mm.

AMIT KUMAR CONT

M/s Guru Construction Company, Ch. Dadri