ADDN ALTN TO JCOs OR ACCN AT LAXMITEK AND GLOBE AREA AT BELGAUM

Amount

B/R ITEMS

Demolition of cement concrete (unreinforced) in ground floor and paving not exceeding 15cm thick below or above GL including removal of debris to outside MD land.etc., complete all as specified and as directed.

Dismantling of floor hearth or wall tiling or terrazzo flooring including cement mortar bedding (but not backing) and removing rubbish off the premises to outside MD land etc., complete all as specified and as directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.including brushing neat cement slurry with 3.0kg of cement per Sq. metre complete all as specified and as directed.

Material and labour for providing 25mm thick Plain Cement Concrete 1:2:4, type B1, using 20mm graded stone aggregate as in flooring portions and mass concrete etc., complete all as specified and as directed.

Material and labour for coloured Nano Vitrified tiles of premium quality, 7-8mm thick (square/ rectangular) polished, light shade, area of each tile not exceeding 0.36 Sqm, laid in floors of pattern as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in Cement Mortar 1:6 etc., complete all as specified and as directed.

Material and labour for coloured Non Skid ceramic tiles of grade B-II(a), 7 to 8 mm thick (square/ rectangular), light coloured group, area of each tile exceeding 0.11Sqm but not exceeding 0.18 Sqm, fixed in vertical surfaces / skirtings of pattern as approved, over 10mm thick backing coat in CM 1:4 on fair faces of brick work etc set and joint in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Material and labour for glazed coloured ceramic tiles of grade B-III, 7mm thick of size 450x350mm or of size matching to floor tile as approved, fixed on vertical surfaces such as in skirting/dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match floor tile over 10mm thick plaster in CM 1:4 on fair faces of brick work or on one side of lathing as in backing coat complete all as specified and directed.

Material and labour for coloured Non Skid ceramic tiles of grade B-II(a), 7 to 8 mm thick (square/ rectangular), light coloured group, area of each tile exceeding 0.06Sqm but not exceeding 0.11 Sqm, laid in floors of pattern as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in Cement Mortar 1:6 etc., complete all as specified and as directed.

Taking down cement or cement lime plaster of any description on brick work or stone walls / cement surfaces / ceiling plaster etc., including raking out of joint , hacking for key scrubbing down with water and removing debris to outside MD land etc., complete all as specified and as directed.

Material and labour for Rendering in Cement Mortar 1:6, 10mm thick on stone masonry or other than fair faces of brick work wall surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for preparation of newly plastered surfaces of wall and applying 2.0 to 3.0mm thick white wall care putty to make the surface even and smooth finish, rubbing with sand paper of different grade etc., and applying two coats of Oil Bound Distemper over a coat of primer, applied by the authorised applicator of manufacturer of the paint approved by GE etc., complete all as specified and as directed.

Material and labour for complete removal of existing treatment on surfaces of ceiling with electric operated blade, washing with water and applying 2.0 to 3.0mm thick white putty to make the surface even and smooth finish, rubbing with sand paper of different grade etc., and applying two coats of Oil Bound Distemper over a coat of primer applied by the authorised applicator of manufacturer of the paint approved by GE etc., complete all as specified and as directed.

Material and labour for rendering to soffits of ceiling, etc., 5 mm thick in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for applying three coats of white wash on ceiling including preparation of newly plastered surfaces complete all as specified and as directed.

Material and labour for complete removal of existing treatment on surfaces of ceiling and applying for applying three coats of white wash including preparation of old surfaces complete all as specified and as directed.

Material and labour for 15 mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 surface finished even and smooth without using extra cement with water proofing compound complete all as specified and directed. Note : Water proofing compound shall be measured and paid separately as supply and fix only.

Supply only integral water proofing compound complete all as specified and directed.

Material and labour for Preparing new plastered walls surfaces & Finishing with Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) omplete all as specified and directed.

Material and labour for Preparing for complete removal of existing treatment on old walls & Finishing with Premium Acrylic Smooth exterior paintrequired shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons laid, bedded & pointed in any mortar complete all as specified and directed.

Material and labour for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing , polishing and screed bed or bedding layer of mortar 20mm thick for laying floor finishes in CM (1:6) complete all as specified and directed.

Material and labour for Machine cut kota stone slab 20-25mm thick in raiser of steps, skirting,dado and pillar laid over cement backing coat in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Material and labour for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including and polishing screed bed or bedding layer of mortar 20mm thick for laying floor finishes in CM (1:6) complete all as specified and directed.

Material and Labour for 10mm thick rendering in cement mortar 1:3 mixed with liquid water proofing compound as per manufacturer's instructions on roof slab/ floor etc., complete all as specified and as directed. Note: Liquid water proofing compound shall be measured and paid separately.

Material and Labour for providing water proofing treatment with membrane type water proofing method using APP modified prefabricated five layer water proofing membrane mat finish, 3 mm thick and weighing not less than 3.5 kg/sqm reinforced with non woven polyester matt black weighing not less than 100 gm/Sqm, having softening point not less than 140 degree Celsius, longitudinal tensile strength not less than 300 N/Sqm, laid over one coat of bitumen primer at 0.20 Kg/sqm and torch application of membrane using gas burner with 150 mm overlap on side lap and end lap as per manufacturers instructions with top most layer of surface finished with two coats of solar reflective aluminium paint @ 0.10 Litre/Sqm per coat etc., complete all as specified and as directed.

Supply and fix Aluminium sliding windows (triple track), fabricated to required size with powder coated aluminium sections, with bottom track size 92 x31.75 x1.6 mm, side & top frame size 92 x 31.75 x 1.4 mm, top and bottom shutter rail of size 39 x17 x1.4 mm, outer style of size 39 x 17 x1.4 mm, interlock style of size 39 x27 x1.4 mm, including provision of 5mm sheeet glass ordinary quality and stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.4 mm for panels including provision of all hardware fittings such as handles, locking arrangeemnts, rubber gasketss, rollers, spring catchers etc. complete all as specified and directed. Note : Each window shall be provided with 2 glazed shutter & one wire mesh shutter.

Supply and fix Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer?in-charge.Using Designation No.DG :117

Supply and fix anodised aluminium powder coated for window and ventilator shutters,Sliding/Side hung type without sash bars,aluminium section weight 0.55 kg/m including necessary jointing, cleat glazing, clips,Handles 2 Nos in each door,hinges, rubber neoprene packing, anodised snap beading, screws etc,anodised aluminium fittings such as peg stays 150mm long(1 no)hinges type B-21 100mm long (2 no) suitable handle(1 no) complete all as specified and as directed.

Supply and fix 20mm dia CP curtain rod with decorative fixing brackets etc complete all as specified and as directed.

Taking down chowkhat with shutters (W/o taking off shutters from the frame) n exc 1.5 Sqm each complete all as specified and as directed.

Taking down chowkhat with shutters (W/o taking off shutters from the frame) exc 1.5 Sqm each & n exc 4 Sqm all as specified and as directed.

Taking down Shutters of any description n exc 1 sq. m each complete all as specified and as directed.

Taking down Shutters of any description exc 1 sq. m but n. exc 2 sq m each complete all as specified and as directed.

Supply and fix 2nd class Hard wood factory made plain framed, 35mm thick panelled shutters (two panel) with lock rail and panel of 9mm ply BWP commercial type or 12mm thick veneered particle board with commercial veneering on both faces, the size of rail and stile are as per IS 1003 (part I) kiln seasoned and chemically pressure treated and fitted to chowkats complete all as specified and as directed.

Supply and Fix 2nd class hardwood factory made 35mm thick glazed and skeleton door shutters, open rebated and prepared to receive glass, gauge etc., without sash bars, edges of framing plain, chamfered, rounded fitted with cut and mitred beads for securing glass etc, size of members as specified in SSR Part 1 section 8 clause 8.24 (a) supplied and fitted to chowkats complete all as specified and as directed.

Material and Labour for 25mm thick Block board, interior grade, grade 2 quality, decorative type on one face fixed with screw to timber frame work including external teak wood lipping 6mm thick around edges all as specified and as directed.

Supply and fix Aluminium alloy wire cloth 0.45mm noinal dia of wire and average width of aperture 1.40mm and fxed with aluminium wire staples all as specified and as directed.

Supply and Fix sheet glass 4mm thick figured, pin head type and glazing with oil putty as directed in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

Supply and Fix factory made solid PVC door frame of size 50mm x 47mm made out of 5mm thick single side prelam PVC sheet and edges will be painted to match with prelam sheet, reinforced with 19mm MS square tube of 19 gauge mitred out at two corners and joined by inserting two Nos of 150mm long brackets of 15mm x 15mm MS square tube inside the drilling 100mm long MS screws using PVC fastener as per specification and drawings as shown in SSR Part II of 2010 complete all as specified and as directed.

Supply and Fix factory made solid PVC moulded door shutter with wood free EPS 28 to 30mm thick (stiles) with 2,4,6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face and 2mm Plain colour PVC Sheet on back face, supplying and fixing in frame at site as per specification and drawing shown on SSR Part-II (2010) complete all as directed.

Supply and Fix precast RCC Jali 35 mm thick 1:2:4 type B 0 using 12.5mm graded stone aggregate in jointed with CM 1:6 complete all as specified and as directed.

Material and labour for preparation of new wooden surface of any description exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Supply and Fix 150mm Extruded aluminium alloy handles fabricated type anodised complete all as specified and as directed.

Supply and Fix 100mm Extruded aluminium alloy handles fabricated type anodised complete all as specified and as directed.

Supply and Fix 125 mm size Mild Steel Butt hinges with mild steel hinge pin, medium weight cold rolled ISI marked complete all as specified and as directed.

Supply and Fix 100 mm size Mild Steel Butt hinges with mild steel hinge pin, medium weight cold rolled ISI marked complete all as specified and as directed.

Supply and Fix aluminium alloy anodised sliding door bolts 300mm long with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections complete all as specified and as directed.

Supply and Fix aluminium alloy anodised sliding door bolts 250mm long with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections complete all as specified and as directed.

Supply and Fix 150mm long aluminium anodised barrel tower bolts of extruded section ISI marked complete all as specified and as directed.

Supply and Fix 75mm long aluminium anodised barrel tower bolts of extruded section ISI marked complete all as specified and as directed.

Supply and Fix Floor door stopper, 140mm overall length of cover plate of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor all as specified and as directed.

Supply and fix in repairs Mild steel Mortice lock of size 65 mm, 2 levers, vertical type, grade 1 with handle set suitable for cupboards all as specified and as directed.

Supply and fix 300mm long, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

Taking up or down steel tubing 15mm bore and connections including cleaning for refixing or removal to store / taken on credit complete all as specified and as directed.

Taking up or down steel tubing 20mm bore and connections including cleaning for refixing or removal to store / taken on credit complete all as specified and as directed.

Cutting chases in brick walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth all as specified and as directed.

Supply and fix Galvanised steel water tubing medium grade 15mm bore conforming to IS specifications and ISI marked with all fittings such as bends, tees, unions, elbows, connecting pieces, plugs, sockets etc fixed on walls/ceiling or laid in floors etc., complete all as specified and as directed.

Supply and fix Galvanised steel water tubing medium grade 20mm bore conforming to IS specifications and ISI marked with all fittings such as bends, tees, unions, elbows, connecting pieces, plugs, sockets etc fixed on walls/ceiling or laid in floors etc., complete all as specified and as directed.

Refixing old Galvanised steel water tubing medium grade 15mm bore and connections in new or old position (Walls, ceiling, floors, etc) with new fittings such as bends, tees, unions, elbows, connecting pieces, plugs, sockets etc., fixed on walls/ceiling or laid in floors etc., complete all as specified and as directed.

Refixing old Galvanised steel water tubing medium grade 20mm bore and connections in new or old position (Walls, ceiling, floors, etc) with new fittings such as bends, tees, unions, elbows, connecting pieces, plugs, sockets etc., fixed on walls/ceiling or laid in floors etc., complete all as specified and as directed.

Supply and Fix in repairs Gun metal globe or gate valve of size 20mm bore confirming to IS 778-1984 with iron wheel head, screwed both ends for GI pipe including all fittings / fixtures like nipple, union etc., complete all as specified and as directed.

Material and labour for Plain Cement Concrete 1:3:6, type C1, 75mm thick (using 20mm graded stone aggregate) laid to a slope of 1:20 as in floors, plinth protection, foot path etc., finished the surfaces even and smooth without using extra cement all as specified and directed.

Supply and fix Vitreous china wash down water closet pan, pedestal pattern, colour white, closed pattern with flat bottom with and including white coloured PVC seat cover, mild steel chromium plated or aluminised hinging device and P/S trap including connections to drain (or outgoing pipe)

Supply and fix in repairs vitreous china wash hand basin, white, Corner type of size 580x450mm including CI brackets and 32mm waste coupling, waste pipe etc and cutting for and pinning in ends of brackets or erecting stand, making necessary connections to Pillar tap, PVC Connection, waste pipe / bottle trap etc., complete all as specified and as directed. Note: (i) The unit rate quoted shall be deemed to include the cost of Corner basin, brackets, 32mm waste couplings and waste pipe. (ii) Pillar tap, Bottle trap and PVC connections shall be measured and paid separately.

Supply and fix in repairs PVC valve less, syphonic action type, low level flushing cistern, 10 litre capacity, white, with accessories like inlet, ball valve, float, handle, brackets, PVC flush pipe, over flow pipe etc., complete all as specified and as directed.

Supply and fix PVC connection 15mm bore, length 600mm with brass nuts of superior quality complete all as specified and as directed.

Supply and fix Stop valve / angle cock 15mm bore, cast copper alloy, chromium plated conforming to IS with screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union, complete all as specified and as directed.

Supply and fix in repairs Bib cock 15 mm bore, cast copper alloy, chromium plated, fancy type with flange and crutch or butterfly handle conforming to IS as per Cat No.CON-107KN of Jaquar or MOR-1030 of Marc or G1805A1 of Parryware or PIS-09H of Prayag or equivalent of other specified makes, screwed down high pressure with fly nuts, screwed for iron pipes or for brass ferrule etc., complete all as specified and as directed.

Supply and fix Pillar tap 15 mm bore, cast copper alloy with capstan heads, chromium plated, fancy type, confirming to IS, screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipes, fixed in repairs complete all as specified and as directed.

Supply and fix in repairs 3 way mixer tap for mixing hot & cold water fancy type brass chromium plated screwed down for 15mm bore GI pipe all as specified and directed

Supply and fix in repairs Brass chromium plated overhead shower with shower arm flange, with swivel joints, any size, fixed to 15mm bore steel pipe, fixed in repairs, all as specified and as directed.

Supply and fix wall self tray (12'') (Make: Silver shine Model No SSWST-601)

Supply and fix in repairs Corner glass shelf, 5mm thick, 9" wide, fixed with suitable mild steel CP brackets, nuts & bolts, fixed in repairs, all as specified and as directed.

Supply and fix PVC connection 15mm size of length 600mm with brass nuts of superior quality as specified and as directed.

Supply and fix PVC connection 15mm size of length 450mm with brass nuts of superior quality as specified and as directed.

Supply and fix Bib tap 15 mm bore, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle confirming to IS screwed down, screwed for iron pipes or for brass ferrule all as specified and as directed.

Stop valve/ cock Chromium Plated fancy type and screwed both ends for iron pipe 15mm dia bore or for union all as specified and as directed .

Supply and fix steel hanger (Make : silver shine Model No 1250) all as specified and directed

Supply and fix 15 mm bore 2 way Bib tap, long body, brass chromium plated, fancy type, with crutch or butter-fly handle, screwed down, screwed for iron pipe or for brass ferrule etc all as specified and directed.

Supply and Fix Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer and tarring back side of frame complete all as specified and as directed.

Supply and fix pressed steel frames for doors with one or more rebates including necessary fixing lugs hinges lock strike plate etc of size 105 x 60 mm complete all as specified and directed

Supply and fix tubular towel rail 20mm dia (Make: silver shine model No SSTR-501 DX) brass chromium plated D type 60cm long between flanges all as specified and directed

Supply and fix PVC (SWR) floor trap for 75mmdia outlet plain with grating including jointing with solvent cement all as specified and directed

Supply and fix Stainless steel Plate rack of size 775mm x 900 x 250mm (24"x36"x10") with separators and 3 tier shelves made out of 0.80mm thick stainless steel sheet of grade AI SI-304 all as per Cat No.P-336 of Prayag or equivalent of other specified makes fixed in repairs complete all as specified and as directed.

Supply and fix in repairs Stainless steel kitchen sink of over all size 915mm x 460mm with drain board and bowl size 410mm x 355mm x 175mm made out of 1mm thick stainless steel sheet of grade AI SI-304 with plugs, washers, waste coupling and 40mm dia waste pipe, fixed over CI brackets or bedding in cement mortar to dwarf wall as required and connecting union to pipe including taking down of existing kitchen sink of any size compete all as specified and as directed.

Supply and fixed in repairs UPVC (SWR) pipes 75mm bore, single socketed in any length with rubber ring joints laid in trenches complete all as specified and as directed .

Supply and fixed in repairs UPVC (SWR) pipes 75mm bore, single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed .

Supply and fix 75mm bore UPVC (SWR) branch piece, single 'Y' equal or unequal complete all as specified and as directed.

Supply and fix 75mm bore UPVC (SWR) vent cowl complete all as specified and as directed.

Supply and fix 75 mm dia PVC (SWR) bends

Supply and fix 110 mm dia PVC (SWR) bends

Supply and fix in repairs 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

Supply and fix 110mm dia PVC (SWR) branch pieces, singe 'Y' equal or unequal with access door all as specified and directed

Supply and fix 110mm dia PVC (SWR) junction single 'T' equal or unequal with access door all as specified and directed

Material and labour for PVC (SWR) gully trap 125/110mm, setting & jointing with solvent cement all as specified and directed

Supply and fix 110 mm dia PVC (SWR) vent cowl

Material and labour for Plain Cement Concrete 1:5:10, type E2, using 40mm graded stone aggregate as in sunken floor concrete, finished the surfaces even and fair to receive the top layer all as specified and as directed.

Applying evenly a coat of blown type bitumen at the rate of 1.5kg/Sqm and blinding with clean dry sand at 0.05Cum/Sqm all as directed.

Cutting holes Not exc 150 sq cm into or through brick walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l using 20 mm graded stone aggregate all as specified and directed.

Demolition of reinforced concrete of any description (reinforcement cut as required to facilitate demolition)& in Roofs, floors (other than ground floors), beams, chajjas and similar suspended works complete all as specified and directed.

Material and labour for providing precast cement concrete, 1:2:4, type B1, using 20mm graded stone aggregate and set in CM 1:6 as in landings, manhole cover slabs, chullah hoods, Chajjas, water troughs, shelves, cooking platform and similar articles with plain faces complete all as specified and as directed. Note: Reinforcement bars shall be measured and paid separately.

Material and labour for Reinforced Cement Concrete, type B1, 1:2:4, nominal mix concrete using 20mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.

Formwork to chullah hoods, chajjas, troughs and similar items including edge to finished fair surfaces all as specified and as directed.

Formwork to flat , rough finished sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. all as specified and directed by Engr-in-Charge.

Material and labour for Mild steel TMT bars of quality conforming to Fe-500D in reinforcement, 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Material and labour for Mild steel TMT bars of quality conforming to Fe-500D in reinforcement, 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Material and labour for Mild steel TMT bars of quality conforming to Fe-500D, 5mm dia and over up to and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and as directed.

Material and labour for cutting holes in brick walls Exc one brick but not exc two bricks walls in cement mortar and stone wallsall as specified and as directed.

Material and labour for Mild steel angles, bars, flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, clamps , manhole handles and similar small articles confirming to Fe-290 Gde-E-165

Material and labour for Providing Plain Cement Concrete, 1:3:6, type C1, using 20mm graded stone aggregate as in plinth courses, copings, kerbs, bed plates, hold fast blocks, levelling courses and the like including necessary form work, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

Demolition of brick work or stone masonry built in cement mortar or cement lime mortar including all quions, arches, pillars etc., but excluding ashlar facing etc., complete all as specified and as directed.

Material and labour for precast cement concrete block masonry with solid blocks grade 'C4' having minimum average compressive strength of 40 Kg/Sq cm at 28 days and Density not less than 1800 kg/cum all as per IS-2185 (Part-I) 2005 exc. 10cm in width and setting in cement mortar 1:4, complete all as specified and as directed.

Material and labour for Writing letters or figures (Block. Roman, Italic or Indian) n exc. 30 cm high complete all as specified and as directed.

Supply and fix Continuous (piano) hinges,brass, bright finish or electrogalvanised with width of flaps 30 mm complete all as specified and as directed.

Supply and fix in repairs 75 mm dia PVC floor trap with cockroach trap and grating (double bowl type) of size 150 x 150 mm with hole for waste pipe in grating as per Prayag Cat No.119 or equivalent of other specified makes including jointing to waste pipe complete all as specified and as directed.

Dismantling carefully damaged concrete surfaces and cleaning unsound concrete by pressure washing thoroughly and mopping the surfaces complete to remove loose materials, dirt, debris, paints etc. and cleaning exposed rusted reinforcement properly to remove rust scales, loose rust etc. by applying a coat of chemical agent of Pidilite Dr. Fixit Rust Remover or equivalent and applying 2 coats of anti corrosive agent of Pidilite Pagel MS 02 or equivalent and pressure grouting as reqd and welding reinforcement in column and bracing /Ring beam whereever reqd complete and applying epoxy bonding agent of Pidilite Dr. Fixit Epoxy Bonding Agent or equivalent to concrete surfaces as per manufacturer instructions and providing readymix concrete /mortar averaging 20mm thick of Pidilite Dr. Fixit Micro-concrete or equivalent and finishing surfaces even and smooth with existing concrete surfaces complete all as specified or as directed (Pressure grouting and reinforcement shall be measured and paid seperately).

Excavating in trenches in, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out hard /dense soil all as specified and as directed.

Material and labour for PCC 1:2:4 type B1 using 20mm graded agregate as in foundation of wall all as specified and as directed.

Material and labour for applying three Coats of white wash on newly plastered wall surface including preparation of surface all as specified and as directed.

Supply and fixing of Plate girder or single stanchions,built up of one beam or channelsection with flange plates, caps,bases. splices, angle brackets, cleats and other connectionconforming to IS 1161 1979 Grade St 240 complete all as specified and as directed.

Supply and fixing of Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting platesOF Grade Fe-410-W(Gde?E-250) quality? all as specified and as directed.

Supply and fixing of mild steel screw bolts with hexagonal or square heads at one end and screwed the other, or screwed both ends of dia 5 to 10 mm with washers and one hexagonal or square exc 5cm but n.exc 10 cm longall as specified and as directed.

Supply and fixing of Fe 410W (Gde E-250) quality A mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted,bolted or welded attachment to bottom of GI pipe conforming to Fe-410W all as specified and as directed.

Material and labour for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of an colour having tensile strength of 550 MPA as in roof covering /cladding to wall fixed with self taping screws all as specified and as directed.

Material and labour for applying two coats of synthetic enamel paint over a coat of red oxide primer to steel surface in including preparation complete all as specified and as directed.

Material and labour for broken stone boulders hard core of guage n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.

Material and labour for 75mm thick Plain Cement Concrete 1:4:8, type D2, using 40mm graded stone aggregate as in sub base, finished the surfaces even and fair to receive the top layer all as specified and as directed.

Material and labour for 40mm PCC 1:2:4 type B1 using 20mm graded stone aggregate as in floor finishing even & smooth without using extra cement all as specified and as directed.

Material and labour for providing Glass dividing strips 3mm thick, 38mm wide inserted in position complete all as specified and as directed.

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out as in hard/dense soil complete all as specified and directed.

Removing surplus excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed

Material and labour for 100 mm thick PCC type D2, 1:4:8 (40mm graded stone aggregate) finished even and smooth with out using extra cement all as specified and as directed.

Material and labour for M sand cushion/bed for laying interlocking tiles / paver blocks complete all as specified and directed

Material and labour for laying of machine pressed precast concrete interlocking paver block, 60 mm thickness, M-35 grade with grey cement and pigments of any shape and size confirming to IS 15658-2006 over 50mm thick compacted sand cushioning complete all as specified and as directed.

Material and labour for providing precast cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in kerb stone set in CM 1:4 complete all as specified and directed.

Excavating in trenches, n exc1.5 m wide and n exc 1.5 m indepth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out hard /dense soil

Material and labour for providing Plain Cement Concrete 1:4:8, type D2, using 40mm graded stone aggregate as in foundation filling and mass concrete for manholes, septic tank etc., complete all as specified and as directed.

Material and labour for Providing Plain Cement Concrete, 1:3:6, type B0, using 12.5mm graded stone aggregate as in plinth courses, copings, kerbs, bed plates, hold fast blocks, levelling courses and the like including necessary form work, weathering, slightly rounded or chamfered angles and throating all as specified and as directed by the Engineer-in-Charge.

Material and labour for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in surface channels & drains all as specified and as directed

Extra for forming fair finished drain or channel of 45cm inner girth in cement concrete using extra cement including forms moulds etc. complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soil complete all as specified and as directed.

Material and labour for rendering 15mm thick in Cement Mortar 1:4 on fair faces of stone surfaces of wall, finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for 150mm dia bore reinforced concrete pipes class NP-2 laid and jointed complete with collars laid in trenches and jointed all as specified incl demolition and breaking up same bore dia pipe complete all as specified and directed .

Material and labour for concrete bed to drain pipes of bore 150 mm in Plain Cement Concrete 1:3:6 type C2, using 40mm graded stone aggregate including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.

E/M PORTIONS

Taking down carefully Aluminum/copper point wiring complete for light, fan, 5 A socket, 15 Amps socket, 2 way points and bell point etc in any type of wiring with boards, holders and any type of electrical fittings etc complete & making good to disturbed area, complete all as specified and as directed.

Dismantling of old unserviceable submain wiring of aluminium conductor cable of 2.5 & 4 sq.mm, complete all as specified and as directed.

Material and labour for Point wiring complete with 1.5 Sq mm single core PVC insulated unsheathed 1100 volt grade copper conductor multi-stranded FRLSH cables drawn through and including PVC casing capping of suitable size with all necessary fittings and provision of one run of copper conductor multistranded unsheathed pvc insulated single core cable of size 1.5 sqmm and connected to common earth dolly incl 2nd HW board with sunmica top cover for mounting switches/sockets etc, complete all as specified and as directed.

One light point controlled by one switch 1 way.

One light point controlled by two 2 way switches.

One Ceiling fan/exchaust fan point controlled by one switch and regulator.

One bell point controlled by one bell push.

One 05 Amps socket outlet on independent board.

One 05 Amps socket outlet on the same board with other switch

Material and labour for Point wiring complete with 2.5 Sq mm single core PVC insulated unsheathed 1100 volt grade copper conductor multi-stranded FRLSH cables drawn through and including PVC casing capping of suitable size with all necessary fittings and provision of one run of copper conductor multistranded unsheathed pvc insulated single core cable of size 2.5 sqmm and connected to common earth dolly incl 2nd HW board with sunmica top cover for mounting switches/sockets etc, complete all as specified and as directed.

Supply and fix switch piano, flush type, single pole, one way, 5/6 Amps, 240 volts, ISI marked complete all as specified and as directed.

Supply and fix Switch piano type, single pole, two way, 230 volts, complete all as specified and directed.

Supply and fix switch socket outlet 5 Amps 3/5 pin flush type multipurpose complete all as specified and as directed.

Supply and fix socket outlet 15 Amps 3 and 5 pin 5 and 15 Amps flush type multipurpose, complete all as specified and as directed.

Supply and fix switch piano flush type 15 Amps 230volts, complete all as specified and as directed.

Supply and fix call bell ding dong AC 230 volts,complete all as specified and as directed.

Supply and fix ceiling rose three terminal surface bakelite type AC 50 Hz 230 Volts of size 65 x 50 mm complete all as specified.

Supply and fix stepped type electronic ceiling fan regulator AC 230 Volts suitable for 1200 / 1400 mm sweep complete all as specified and as directed.

Supply and fix bell push flush type AC 230 Volts 5 Amps complete all as specified and as directed.

Supply, fix, test and commissioning of Energy efficient Ceiling fan of 1200mm sweep, five star rating and all accessories, 230 Volts, AC. 50 Hz Single phase with copper winding all as per Cat No.Efficiencia Neo (BLDC 26 W) of Havells or techno-commercially equivalent of other specified makes, fixed to roof/ceiling with suitable clamp and down rod including provisioning of flexible copper cord of size 23/0.0076 of required length from ceiling rose or connector to ceiling fan etc., complete all as specified and as directed .

Supply, fix, test and commissioning of Wall mounted LED batten 20 Watts (1200x108x62mm) in extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver complete with all accessories, prewired with and including 4 feet 20Watts LED tube light, 5700K with minimum 2000 lumens all as per Cat No.ENDURALINEARNEOBS20WLED865SPCWH of Havells or techno-commercially equivalent of other specified makes fixed on surfaces of wall or ceiling and connecting of flexible wire twin core from ceiling rose to fitting drawn through and including flexible conduit etc., complete all as specified and as directed.

Supply, fix, test and commissioning of Wall mounted LED batten 10 Watts (600x108x62mm) in extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver complete with all accessories, prewired with and including 2 feet 10Watts LED tube light, 5700K with minimum 1000 lumens all as per Cat No. ENDURALINEARNEOBS10WLED865SPCWH of Havells or techno-commercially equivalent of other specified makes fixed on surfaces of wall or ceiling and connecting of flexible wire twin core from ceiling rose to fitting drawn through and including flexible conduit etc., complete all as specified and as directed.

Supply, fix, test and commissioning of Wall mounted LED batten 10 Watts (600x108x62mm) in extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver complete with all accessories, prewired with and including 2 feet 10Watts LED tube light, 5700K with minimum 1000 lumens all as per Cat No.ENDURALINEARNEOBS10WLED865SPCWH of Havells or techno-commercially equivalent of other specified makes fixed on surfaces of wall or ceiling and connecting of flexible wire twin core from ceiling rose to fitting drawn through and including flexible conduit etc., complete all as specified and as directed.

Supply, fix, test and commissioning of Wall mounted LED batten 9 Watts in extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver complete with all accessories, prewired with and including 1 feet 9Watts LED tube light, 5700K with minimum 1000 lumens all as per Cat No. LHEXBLP7IN1W009 of Havells or techno-commercially equivalent of other specified makes fixed on surfaces of wall or ceiling and connecting of flexible wire twin core from ceiling rose to fitting drawn through and including flexible conduit etc., complete all as specified and as directed.

Supply, fix, test and commissioning of energy saving and environment friendly long life LED building security light of 25 Watts with high efficient led as lighting source, minimum luminosity of 95 lm/W with LED driver made up of pressure die cast aluminium housing and with PC cover as diffuser having top opening, separate driver compartment with IP66 protection and impact resistance of IK07 suitable for operation on AC single phase 220-240 Volt, 50 Hz supply all as per Cat No. 25W Endura Citylite Plat Inum LED Street Light LHEWEBP7PL6S025 of Havells or techno-commercially equivalent of other specified makes fixed with and including GI pipe bracket made out of 40mm dia light grade pipe of length 1.2 Mtrs, bend to shape 120-130 degree and fixed on wall with 2 Nos MS clamps made out of 25x3mm flat iron painted with two coats of synthetic enamel paints over a coat of red oxide primer including nuts, bolts and washers etc., and making connections through and including flexible conduit from ceiling rose to fitting etc., complete all as specified and as directed.

Supply and fix SPN enclosure with a 2 pin & earth plug and socket complete with one MCB SP 20 Amps all as specified and as directed.

Supply, install, testing & commissioning of Exhaust fan, PVC body with automatic back shutter louvers 250 mm sweep, 1280 RPM or more, Air Delivery not less than 860 CMH, single phase, 240 Volts, AC, 50 Hz all as per Ventil Air - DX White of Havells or techno-commercially equivalent of other specified makes including cutting hole in to the wall / existing window / ventilator etc., and making good the disturbed surfaces and connecting up complete including provision of cable 3/2 core of suitable size from ceiling rose to fan in flexible hose complete all as specified and as directed. Note :- (i) The unit rate quoted shall be deemed to include the cost of making hole in walls/other surfaces, making good the disturbed surfaces including any framework/cement work/wood work/welding work etc. required for proper fixing of the exhaust fan and matching to the existing surface.

Material and labour for concealed sub main wiring complete with two runs of 4.0 Sqmm single core, multistranded, FRLSH PVC insulated unsheathed cable 1100 volts grade with copper conductor, drawn through and including new non metallic rigid PVC conduit 25mm dia medium grade, ISI marked with conduit fittings and accessories, concealed on surface/recess with one run of 4.0 Sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor and connecting to common earth dolly etc., complete all as specified and as directed. Note: (a) Two runs of 4.0sqmm multistranded cable and one run of 4.0sqmm cable as earth continuity conductor along with one run of non metallic rigid PVC conduit 25mm dia medium grade shall be considered as one unit length. (b) The cost of cutting chases in brick/stone masonry walls and making good the disturbed surfaces is deemed to be included in the quoted rate. (c) The wiring shall be done in proper colour coding using Red, Yellow, blue for phases, black for neutral and green for earth.

Material and labour forPVC Conduit sub main wiring complete with two runs of 2.5 Sqmm single core, multistranded, FRLSH PVC insulated unsheathed cable 1100 volts grade with copper conductor, drawn through and including new non metallic rigid fixed conduit 25mm dia medium grade, ISI marked with conduit fittings and accessories, PVC conduit on surface/recess with one run of 2.5Sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor and connecting to common earth dolly etc., complete all as specified and as directed. Note: (a) Two runs of 2.5sqmm multistranded cable and one run of 2.5sqmm cable as earth continuity conductor along with one run of non metallic rigid PVC conduit 25mm dia medium grade shall be considered as one unit length. (b) The cost of fixing on brick/stone masonry walls and making good the disturbed surfaces is deemed to be included in the quoted rate. (c) The wiring shall be done in proper colour coding using Red, Yellow, blue for phases, black for neutral and green for earth.

Taking down existing MCB DB alongwith MCBs & old wooden boards & making good to disturbed surfaces complete all as specified and directed.

Sheet metal enclosure type TP&N Vertical Loadline DBs are fitted with Bus Bars, Neutral Links, Blanking Plates (without MCCB) 4 Way with double door type and fixed flush in wall including cutting chases in wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and as directed. Havels CatNo DHDLVDRWGOF008 or equivalent in Crompton Greaves/ Philips/ Wipro as approved by GE.(Note-MCCB & MCB TPs will be measured separately) complete all as specified and directed.

Supply and fix Thermal magnetic release MCCB 4 pole 415 volt rapturing capacity 16 KA 0f size 100 A amps complete all as specified.

Supply and fix MCB DP 40 A 10KA B series 50HZ AC supply incl dismantling old one complete all as specified and as directed by the Engr-in-Charge.

Supply and fix MCB SP 240 Volt of capacity 5 to 32 Amps ‘B’ series, ll as specified and as directed

Material and labour for MCB DB SPN 12 way with 100 Amps rated bus bar double door type and including 2nd class hard wooden board 4cm depth with sunmica top of suitable size to fix the MCB DB, complete all as specified and as directed.

Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning of capacity TP 25 To 63 AMP all as specified and as directed.

Taking down existing & U/S ceiling & exhaust fan, sealing cable end,dismantling blades and removing fan and blades to store complete all as directed.

Material and labour for Earthing complete with galvanized steel earth plate electrode of size 600mm x 600mm, 6.0mm thick burried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of plate not less than 1.5m below normal ground level, surrounded from all sides by 15 cm thick packed layer of charcoal dust and common salt, filling in alternate layer and earth plate connected to galvanized iron earth wire of 4mm dia as earthing conductor by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No.3 of MES Schedule (Part I) (2009) connected to earth test point/ main switch/ DB/ Panel board all as specified including testing on completion with and including 15mm bore medium grade GI protection pipe upto 7.5 meter long all as specified and directed.

Supply, fix, connecting and testing smart AMR Meter, 10 to 60 Amps capacity, Digital type, suitable for Single Phase two wire electric distribution, 240 V, AC, 50Hz, with Class-1 accuracy conforming to IS 13779 and relevant IES standards with inbuilt low power ratio frequency (LPRF) communication facility in 865-867 MHz Cyantech or equivalent mesh network with default and demand display, billing data generation facility, micro processor and LED/ LCD based circutry, tamper proof, including provision of 2nd class hardwood box of suitable size with Sunmica top sealing the meter , writing MES number and taking down the unserviceable metre and deposing in the store all as specified and as directed. Note: Rate quoted for this item shall also include for supply and fix configuration of cloud hosted multi user web based software as per company specification for each meter.

Supply, fix, connecting and testing Data Concentrator Unit IP 51 rated Data Concentrator Unit (DCU) compatible for remote Automatic Meter Reading (AMR) solution and capable of communicating with the static energy Meter in the corresponding frequency band and with the data server through GPRS and shall have minimum data transfer rate of 9600 bps, internal memory to store data of 50 modules for 6 month period and shall be based on Cyantech Mesh network within 50 metre range with an IP 65 box complete all as specified and as directed

Supply and fixing Sheet Moulding Compound (SMC) box of size 350x250x150 mm or suitable size for DCU, off white colour, with front hinged type door and locking arrangement, front side transparent and of size suitable for three phase AMR Meter/ Data Concentrator unit/ Repeater unit etc. and box fixed on wall with suitable Screws complete all as specified and as directed.Make: SINTEX Cat No GSMB 3525NF or equivalent as approved by GE

Supply and fixing Sheet Moulding Compound (SMC) box of size 250x250x155 mm or suitable size for single phase meter, off white colour, with front hinged type door and locking arrangement, front side transparent and of size suitable for single phase AMR Meter and box fixed on wall with suitable Screws complete all as specified and as directed.Make: SINTEX (GS MB 2525 NF) or equivalent as approved by GE

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25Sqmm x 3.5 core including removing old US under ground of aluminium conductor cable of 25 sq.mm complete,all as specified & directed

Material and labour for Double wall corrugated high density polymer ethyl pipe of size 63 mm outer dia with ISI marked (IS 14930- 2001 ), laid in trenches /floors & fixed on wall/ pole with & including necessary fittings such as bends, sockets & other connected accessories etc for laying of electric cables, complete all as specified & directed. Make - Duraline, Rex, Tirupati, Tijaria,Ketron.

Material and labour for HT/LT cable route indicators precast block of size size 300mm x 180mm x 40mm in mix 1:2:4 using 20 mm graded stone aggregate with engraving HT/LT MES CABLE" embedded with PCC in mix 1:4:8 incl necessary exc,returning filling & removal of soil complete all as specified & directed.

Excavation in trenches in any type of soil n. exc 1.5m wide and n. exc 1.5m in depth for laying of pipes/cables in trenches for foundation etc., not exceeding 10 Sqm on plan and not exceeding 1.5m depth and getting out including leveling of bottom surface and trimming of sides complete all as specified and directed.

Dismantling of old unserviceable under ground aluminium conductor cable of 25 Sqmm complete all as specified and directed.

Boring of holes under road pavement hard standing using ultra sound technique and necessary machine including HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure complete all as specified and directed.

Taking up or down steel tubing of size upto 40 mm bore and connections, including cleaning for refixing or removal to store as per specified and directed.

Supply and lay pipe galvanized, “Medium class”, including fittings complete under trenches including all fittings of following sizes :-

(a) 40 mm dia

(b) 25 mm dia

Supply and Fix, 1000 litres capacity Rotational Moulded Polyethylene (HDPE) FDA grade materials water storage tanks, 'ISI' marked, three layered (Cylindrical vertical with closed top) screwed lid type conforming to IS 12701-1996 with manhole lid and suitable locking arrangement including making holes for inlet, outlet, washout and over flow pipes, hoisted and fixed in position as specified in SSR Part -I (2009) including demolition/taking down of the existing RCC/PVC water storage tank of any description from the existing staging/ Bldg after disconnecting and dismantling of all existing pipe line connections carefully complete all as specified and as directed.

Supply and fix 25 mm dia PTMT ball valves high pressure (minimum weight 210 grams) with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe all as specified and directed.

Supply and Fix Gun metal globe or gate valve of size 25mm bore confirming to IS 778-1984 with iron wheel head, screwed both ends for GI pipe including all fittings / fixtures like nipple, union etc., complete all as specified and as directed.

Supply and Fix Gun metal globe or gate valve of size 40mm bore confirming to IS 778-1984 with iron wheel head, screwed both ends for GI pipe including all fittings / fixtures like nipple, union etc., complete all as specified and as directed.

Supply, Install, testing and commissioning of Vertical type Storage electric water heater (Geysers) of 25 Ltrs capacity, tank made of ultra thick super cold rolled steel plates with high density PUF insulation, 2 KW, 230 V, Single Phase, 50 Hz, AC, BEE 5 Star rated all as per Cat No: GHWAMFSWH025 (Monza EC) of Havells or techno-commercially equivalent of other specified makes including provision of multifunction safety valve including suitable plug top and grouting and fixing with and including 2 Nos anchor fasteners of size as per manufacturer's instructions, making good the disturbed surface complete and connecting electrical and water supply connection using steel braided hose 2 Nos, testing and commissioning etc.,complete all as specified and as directed.

Material and labour for PVC insulated and sheathed flexible multistranded copper conductor cable, 3 core x 2.5 sqmm size, 1100 volts grade all as specified and directed.

Supply and fix UPVC pipes of pressure rating 10 kgf/cm2 laid in trench or fixed on walls, ceilings or in floors of size 15 mm bore complete all as directed.

Supply and fix UPVC pipes of pressure rating 10 kgf/cm2 laid in trench or fixed on walls, ceilings or in floors of size 20 mm bore complete all as directed.

M/s S N Atiwadkar

ASHIRWAD ELECTRICALS

B G GODSE ENGINEERS AND CONTRACTORS

PRAGATHI BUILDERS

VIRENDRA FABRICATORS

M/s NEELAM ELECTRICALS