REPAIR TO JOINERY, TOILETS, INTERNAL WATER SUPPLY, FLOORS, PLASTER ETC AND OTHER CONNECTED B/R WORKS IN PHASE-II DOMESTIC AREA AT AIR FORCE STATION UDHAMPUR

Amount

Taking down shutters of any description n exc. 1.00 Sqm each, complete all as specified.

Taking down shutters of any description exc. 1.00 Sqm and n exc. 2.00 Sqm each, complete all as specified.

Taking down Chowkats or Frame (without taking off shutter from the frame) n exc. 1.50 Sqm, complete all as specified.

Taking down Chowkats or Frame (without taking off shutter from the frame) exc. 1.50 Sqm but n exc 4.00 Sqm each, complete all as specified.

M&L for Pressed steel frames of size 105 X 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified.

M&L for Pressed steel frames of size 125 X 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified.

M&L for PCC 1:3:6 type C-1 (using 20mm graded aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

M&L MS helical door spring 150 mm ordinary springs pattern including roller and roller plate complete with welding etc and making good the disturbed portion complete all as specified.

M&L in repair MS helical door spring 150 mm ordinary springs pattern including roller and roller plate complete with welding etc and making good the disturbed portion and finishing as per the adjacent surfaces etc complete all as specified.

S&F Floor door stopper of 140mm aluminium alloy body and tongue, anodised, with hard drawn steel spring, complete all as specified.

S&F in repair Floor door stopper of 140mm aluminium alloy body and tongue, anodised, with hard drawn steel spring, complete all as specified.

S&F 2nd class hardwood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, includign all necessry labours, articles n exceeding 200 cu cm each complete all as specified.

S&F continuous (piano) hinges mild steel, bright finish width of flaps (when open) 30 mm, complete all as specified and directed.

S&F 25mm thick flush shutter solid core construction, with block board core and plywood face panels commercial type on both side complete all as specified.

S&F 30mm thick flush shutter solid core construction, with block board core and plywood face panels commercial type on both side complete all as specified.

M &L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying 02 coats of synthetic enemel paint over incl one coat of primer complete all as specified.

S&F 35mm thick 2nd class hard wood Plain framed shutter (One/two panel) with lock rail and panel of 9mm BWP ccommerial ply or 12mm veneered particle board with ommercial veneering on both faces. The size of rail and stiles as per IS:1003 (part-I), kiln seasoned and chemically pressure treated complete all as specified.

S&F 35mm thick 2nd class hard wood Glazed and Skelton Shutter open rebated and prepared to receive glass gauze etc (without shas bar) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of numbers of shutter as specified in SSR Pt I Section 8, clause 8.24 (a) complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified.

S&F Factory made Solid Panel PVC Door Shutter 30 mm thick consisting of frame made out of MS tubes for Top & bottom nails MS framed shall be covered with neat moulded plain coloured PVC 'C' channel having PVC sheet ship if 20 mm width stuck inside with solvant cement for style and plain colour PVC shutters for top rail lock rail and bottom rail on edges side & gap insert for top rail bottom rail panelling of plain colour PVC sheet truck and nail with suitable PVC sheet bedding and jointed to shutter with solvent gear supply and fixing in the frame at site complete all as specified.

M&L in repairs for Sheet Glass, 3.00mm thick glazing with Beads or Oil Putty, not exc. 0.5 Sqm in Each Pane, complete all as specified and as directed.

All as per item No 21 above but Figured glass, pinhead type in squares n exc 0.5 sqm each pane complete all as specified and as directed.

S&F factory made mild steel ventilators box type with upper top hung shutters and bottom fixed type shutters including pintol hinges, steel peg stay and one shop coat of red oxide primer incl taking down old, complete all specified. Note :- (i) The ventilator shall be fabricated as per Drg No CEUZ/TD/1302/2009 Sheet 1/3 to 3/3. (ii) Glazing, wire gauge shall be measured and paid separately.

M&L for Factory made Steel Window 1.25mm thick box type (primer coated) ERW hollow P section of size 60mm x 25mm including grill using 10Sqmm bar double rebated both gauge and glass shutter comprised gauged glazed Skelton shutter of ERW section 50mm x 20mm and 1.0mm thick with two openable leafs having two Nos sash bar of T Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and good dismantled portion in PCC (1:2:4) type B-1 four Nos for each window including following fittings welded to frame shutter complete all as specified and as directed:- (a) Hold Fast, 150mm long of Flat Iron 12mm x 3mm made to shape 04 Nos per window . (b) Handle of Z-Section 20mm x 25mm, 100mm Long 01 No per Leaf . (c) MS Tower bolt 150mm long - 02No per leaf . (d) Z-section 20mm x 25mm, 100mm Long Stopper 1 No per Leaf . (e) Cleat 55mm Long of Hollow Square 15mm x 20mm x 63mm welded to Hinge 01 No per Leaf . (f) MS Pintal hinges of size 75mm x 12mm 02 Nos per Leaf including Stainless Steel Wire Cloth, 0.25mm to 0.36mm nominal dia of wire & average width of aperture 1.40mm to 02mm & fixed with aluminium wire staples and glass pane 3mm thick fixed with MS pin and oil putty including two coats of synthetic enamel paint complete and incl taking down the existing old windows.

M&L for Preparation of new steel and iron surfaces of any description over 10 CM width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

S&F in repair 100mm long Butt Hinges Medium Weight, Cold Rolled Mild steel and fixed complete all as specified and as directed.

S&F 100mm long Butt Hinges extruded aluminium alloy with Galvanised mild steel hinge pin, anodised and fixed complete all as specified and as directed.

S&F in repair 150mm long Cast iron or malleable cast iron Handles, cast type, stove enamelled lack, complete all as specified and as directed.

S&F 150mm long Extruded aluminium alloy Handles, fabricated type, anodisedcomplete all as specified and as directed.

S&F in repair 200mm long Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed, complete all as specified and as directed.

S&F 200mm long Aluminium anodised, barrel Tower Bolts of extruded section and fixed complete all as specified and as directed.

S&F in repair 300mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

S&F 100mm long Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws, complete all as specified and as directed.

S&F in repair 100mm long Aluminium anodised Hasp and staple incl bolt to hinge plate and fixed with screws, complete all as specified and as directed.

S&F for galvanised stainless steel wire cloth, 0.56 mm nominal dia wire and average width of aperture 1.18 mm and fixed with tinned tacks or stainless steel wire staple complete all as specified.

S&F in repair galvanised stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or stainless steel wire staple complete all as specified.

Demolition of cement concrete (unreinforced)(alongwith floor tiles) of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

Dismantling floor, hearth or wall tiling incl cement mortar bedding(but not backing) removing serviceable tiles to store,if any, or rubbish off the premises.

M & L Cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate) 25mm thickness as in floor for laying tiles brushing with neat cement slurry @ 3.00 Kg/Sqm complete all as specified and as directed.

M&L for Non-skid Coloured Ceramic Tiles (Square/rectangular) area of each tile exceeding 0.11 sqm but nexc 0.18 sqm, 7-8mm thick in floors etc set & jointed in neat cement slurry & pointed in white or coloured cement to match including screed bedding layer of 15 mm thick in CM 1:6, complete all as specified and as directed.

M & L for Glazed coloured ceramic tiles in vertical surface 450x300x7 mm/350x 250x7mm / 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thk rendering in CM 1:3, complete all as specified and as directed.

Taking down shutters of any description from the frames and refixing in the same opening after repair of door rescuring or easing & adjusting etc,area exc. 1.00 Sqm but n.exc 2.00 Sqm each complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any descriptions, in Ground floors (Floor Topping, Sub Base etc) not exc 150mm thick, above or below ground level complete all as specified and directed.

M&L for providing 50mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in Plinth protection laid in alternate bays (n exc 2 Sqm each ) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight, complete all as specified.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.

M&L Granite slab 16 to 18mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding of exposed edges.

M&L machine cut Kota stone slab flooring 18-20mm thick, laid over and incl 15mm thick cement screed /rendering in CM 1:6 ,laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting, rubbing, gridding and polshing to achive mirror finish complete all as spd.

M&L machine cut Kota stone slab in riser of steps,skirting,dado and pillar, 15mm thick, mixed with pigment to match the shade of the slab incl 10mm thick cement screed /rendering in CM 1:4 incl cutting, rubbing, gridding and polshing to achive mirror finish complete all as spd.

Demolition of brick work or stone masonry built in cement mortar including all quoines arches, pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles complete all as specified.

M&L brick work with sub class B bricks straight or curved on plan exc 6m redius in CM 1:6 complete all as specified and as directed.

All as per above ser item No 51 but herein before except bricks

M&L brick work with sub class B bricks straight or curved on plan to any radious in half brick thick built in CM 1:4, complete all as specified and as directed.

Taking down cement plaster of any description on brick, concrete or stone walls or ceiling including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off complete all as specified and as directed.(Note: Height of the work upto 15.00 m)

M&L for rendering 15mm thick CM 1:6 on fair faces of brickwork or concrete surfaces finished even & smooth w/o using extra cement complete all as specified and as directed.

M & L for Rendering 15mm thick in cement mortar 1:4 on other than fair faces of Brick walls or on concrete surfaces plastered surfaces finished even and smooth without using extra cement complete all as specified and as directed.(Note: Height of the work upto 15.00 m)

M&L Rendering 5mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling complete all as specified and as directed.

M&L for two coats of OBD on new plaster surfaces including preparation of surfaces complete all as specified and as directed.

M & L Preparing New Surfaces of Walls and applying two coats of Cement base paint as per the existing pattern complete all as specified and as directed.

M & L for two coats of white wash on newly plaster surfaces of ceiling incl preparation of surfaces complete all as specified and as directed.

M&L and taking down of existing unserviceable roof treatment materials and PCC/CM/Brick tiles padding etc from top of roof upto slab (complete depth) carefully by cutting chiseling, cleaning the surface by scraping brooming brushing etc and removing the rubbish from site exc. 500m but n exc 5.00 Km (Outside of MoD land) and applying roof treatment with the following specifications:- (a) Rendering 10mm thick in CM 1:3 with water proofing compound on cleaned concrete surfaces of roof and finishing the surfaces fair and even including curing the plastered surfaces for 07 days by ponding of water over the roof (Levelling course). (Note : Water proofing compound shall be paid and measured separtely). (b) Applying evenly first coat cold bitumen primer confirming to IS-3384-1986 @ 0.40 Ltr per square metre on the cleaned plastered surfaces. (c) Applying evenly second coat of blown hot bitumen of grade 85/25 @ 1.20 kg per square metre (confirming to IS-702) on primed surfaces. (d) Applying third coat of APP modified membrane 3mm thick (minimum) and weight 3.60 Kg per square metre (reinforced) with polyster non woven fabric weighing not less than 150gms per square metre by torch application. The overlap shall not be less than 100mm on the transverse direction and 75mm on longitudinal direction respectively and sealing overlaps. Notes :- (i) Payment against this item shall not be allowed till completion of all the stages of work for any slab. (ii) The work shall be executed through well-trained applicators as per manufacturer's instructions after obtaining written approval from the GE. (iii) Make of Butumen: HPCL, IOCL & BPCL (iv) Make of APP Membrane: M/s Sika India Pvt Ltd, M/s STP limited, M/s IWL India Ltd, M/s Asian Paints Ltd. (v) Torchtar Brand APP Membrane , flashing tapes & wraping coat.

Supply only Integral Water Proofing compound, complete all as specified.

Disconnecting existing water tanks exc 250 & n.exc 500 Ltr capacity , setting aside (or lovering if required ) and cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes and reconnecting and re-fixing in position all as specified and directed.

Taking up or down 15mm bore of steel tubing with connections for cleaning for refixing or removing to store/yard complete all as specified .

S&F for steel water tubing of nominal bore 15mm medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified.

Taking up or down 20mm bore of steel tubing with connections for cleaning for refixing or removing to store/yard complete all as specified .

M&L for steel water tubing of nominal bore 20 mm, medium grade galvanised with all fittings including short lengths, laid in trenches complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified.

Dismantling and removing to water storage tanks of capacity exceeding 250 liters but not exceeding 500 ltrs and removing to stores complete all as specified .

S&F for 500 ltrs capacity rotational moulded polythylene water storage tank (Cylindrical vertical with closed top) hoisted including ball, brass valve 20mm high pressure with polythylene float and fly nuts screwed for iron pipes, all as specified in SSR Part I.

Taking down existing damaged IWC alongwith complete PCC and lime concrete from sunken floor and providing new IWC and water proofing treatment to sunken floor as per following stage :- (i) 15mm thick plastering in CM (1:2) with WPC all around and base of sunken floor with proper slope. (ii) Applying a coat of 85/25 grade hot bitumen @ 0.70Kg/Sqm over a coat of bituminous primer @ 0.5Kg / Sqm and then pasting of polythene film, 150 micron, natural colour with cold cut back adhesive. (iii) Fixing of 25mm dia GI pipe (medium grade) spout of length 45 cm. (iv) Filling sunken portion with PCC (1:4:8) type D2 using 40 mm graded aggregate after tesing of water tightness. .

S&F in repairs vitreous china wash down Water Closet white squatting pan Orissa pattern size 580x440mm with integral foot rest incl making necessary connections to soil pipes and flushing cistern complete all as specified and as directed.

S/F in repair Vitreous china wash down water closet Pan (pedestal Pattern) white colour (excluding fixing bolt, flushing cistern and flush pipe) size 580 x 440mm with integral foot rest connecting flushing cistern and flush pipe complete all as specified and as directed.

S&F in repair seat and cover for pedestal pan white / black closed pattern with flat bottom and cover and MS chromium plated aluminium hinge devic, complete all as specified and as directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

S&F in repair CP Seat jet with one meter PVC tube complete all as spfd.

S&F in repair Vitreous china Wash Hand Basin size 550x400mm (flat back or angle back type) including 32mm dia brass chromium plated waste fitting a pair if cast iron bracket duly painted/erecting stand including cutting and pinning in ends making good disturbed surfaces in CM 1:3 complete all as specified and as directed.

M&L for PVC Flushing Cistern 10 litre capacity low level valve less, symphonic action type white with inlet, ball valve, flaoat and handle including 32mm dia PVC Flush pipe a pair of cast iron brackets duly painted/erecting stand including cutting and pinning in ends, making good disturgbed surfaces in cement mortar 1:3 including taking down unserviceable flushing cistern complete all as specified and directed.

S&F in repair angular Stop/Angle valve fancy type chromium plated,screwed down, high pressure with crutch or butterfly handle 15mm bore, complete all as specified and as directed.

ditto but concealed type complete all as specified and as directed.

S&F in repair Brass chromium plated WHB center hole single lever mixer for mixing hot & cold Water screwed down for iron pipe 15mm bore complete all as specified and as directed.

S&F in repair, Bib taps cast copper alloy 15mm bore, fancy type Chromium Plated , screwed down high pressure with crutch or butterfly handle, screwdd both ends for iron pipe or for unions, complete all as specified and as directed.

S&F Pillar cock 15mm bore fancy type chromium plated, screwed down high pressure with or without lettered HOT or COLD with long screwed and fly-nuts screwed for iron pipe or brass ferrule and fixed in repair complet all as specified and as directed.

S&F in repair CP 15mm bore wall mixer with hand shower arrangement with connecting legs, wall flanges & wall brackets for hand shower complete all as specified and as directed.

S&F in repair CP Towel Rail 600mm long fancy type fixed with and including chromium plated brass screws and plastic cleats complete all as specified and directed.

S&F in repair CP Soap Dish fixed in wall complete all as specified and as directed.

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard and railing 60cm long complete all as specified and as directed.

S&F in repair CP Grating doom 100mm dia complete all as specified and directed.

S&F in repair CP Grating doom 125 mm dia with waste hole complete all as specified and directed.

M&L for PVC Conncetions 15mm size with PTMT Nuts of length 450mm and fixed including taking down unserviceable PVC Connections, complete all as specified and as directed.

S&F PVC waste pipe 32/40mm dia for WHB complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)

S&F PVC (SWR) pipes, 110mm dia, single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified & as directed.

S&F PVC (SWR) pipes, 75mm dia, single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified & as directed.

S&F PVC (SWR) 75mm dia floor trap, plain with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.

S&F PVC (SWR) bends 75mm bore complete all as specified and as directed.

S&F PVC (SWR) bends 110mm bore complete all as specified and as directed.

S&F PVC (SWR) 110mm bore branch piece, single (single Y) equal or unequal provided with access door complete all as specified and as directed.

S&F PVC (SWR) 110mm bore branch piece, double (double Y) equal or unequal provided with access door complete all as specified and as directed.

S&F PVC (SWR) 75mm bore Vent cowl complete all as specified and as directed.

S&F in repairs, for plate rack made of stainless steel 0.63 mm thick of size 600 X 750 mm fixed to wall with and incuding angle iron brackets of suitable size grouted in cement concrete, complete all as specified.

S&F in repairs, sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified.

S&F in repairs for Waste coupling of PTMT (half or full threaded). (Minimum weight 32mm-45gms/40mm-60 gms

S&F in repairs Brass chromium plated shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union, complete all as specified. Make: Cera.

S & F in repairs 25 mm dia stainless steel curtain rods incl funnel horns, brackets and mid supports, end caps etc all as specified

M&L for cleaning the surfaces of accessible roof periodically twice for the entire period of contract, complete all as specified and directed by Engr-in-charge.

M & L repairs to chhajja, projection, parapets etc at any height with cement plaster/PCC (1:2:4) incl providing reinforcing bars of 8 mm dia and formwork where required and making good the disturbed portion and finishing the surface with the similar painting material adjacent to the repaired portion.(Surface area to be measured for repaired porion)

PARAS RAM ASGOTRA AND SONS

MAHAJAN TRADING CO

TARUN BUILDERS