Shifting of Medical Oxygen Generating Plants (MOGP) of 1000 LPM Capacity from MMCH Panbazar and reinstallation at Dhubri Medical College and Hospital, Dhubri (Balance Emergency Work)

Amount

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil

Excavating, supplying and filling of local earth (Including royalty) by mechanical transport upto a lead of 5km also Including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc complete.

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:2:4 (1 Cement: 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 20 mm nominal sizederived from natural sources)

1:2:4 (1 cement: 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Supplying and stacking at site. Moorum

Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller Including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres.ying

Extra for compaction of earth work in embankment under optimum moisture conditions to give at least 95% of the maximum dry density (proctor density).

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level: 1:4:8 (1 Cement: 4 coarse sand (zone-Ill) derived from natural

1:5:10 (1 cement: 5 coarse sand (zone-lIl) derived from naturaL sources: 10 graded stone aggregate 40 mm nominal size derived from natural sources)

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand (zone-III) derived from natural sources: 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation,levelling & dressing & finishing the top smooth.

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources. Portland Pozzolana /Ordinary Portland/ (Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately.) In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cernent.All works upto plinth level, Concrete of M25 grade with minimum cement content of 330 kg/cum

Add for using extra cement in the items of design mix over and above the specified cement content therein.

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I. wire of dia 4 mm

Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. 50 mm average thickness in 3 layers.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement: 6 coarse sand)

Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junctions and corners, 25 mm dia pulley, 40x40x6 mm angle and T-iron guide at the top and bottom respectively, including applying a priming coat of approved steel primer

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting. hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting. fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes

Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.

55 mm thick cement concrete flooring with concrete hardenar topping under layer 40 mm thick cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and top layer 12mm thick cement handener consisting of mix 1:2 (1 cement hardener mix: 2 graded stone aggregate 6 mm nominal size by volume, hardening compound mixed @2 liter per 50 kg of cement or as per manufacturer's specifications. This Includes cost of cement slurry, but excluding the cost of nosing of steps etc complete

Providing corrugated G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.l. limpet washers or with G.I Iimpet washers filled with white lead, Including a coat of approved steel complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm/m2

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in hortzontal/vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete: Ridges plain (500-600mm)

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete: Gutter (600 mm over all girth)

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, Including Jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter

18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement: 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement: 6 fine sand).

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: New work (two or more coats) over and including water thinnable priming coat with cement primer

Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10sqm

Supply, Installation, Testing & Commissioning of Copper Pipes Solid drawn, seamless, de-oxidised, non-arsenical, half-hard, tempered and de-greased copper pipe conforming to latest BS EN 13348 :2001 and manufactured as per BS: 2871, 1971 Part I, Table X (or as per EN 1057). All copper pipes will be de-greased & delivered capped at both ends. The pipes will be accopanied with manufactures LLOYD test certificate. 28mm OD x 0.9mm thick

Supply, Installation, Testing & Commisioning of Area Line Pressure Alam with displays for various faults indications and capable of monitoring maximum 5 medical gas servise by means od pressure switches etc with audible warning with automatic reedit when the gas sevice returns to normal as Each per standard specifications all as specified and as directed for the following Area Line Pressure Alerm:- i)3 Gas Line Pressure Alarm

Supply, Installation, Testing & Commisioning of isolation Valves with brass body with nickel plate valves operating handle suitable for 15mm OD copper pipe to 76mm OD copper pipe with brass adapter as per standard specification all as specified and as directed for the following Isolation Valves:- 28mm OD

Wiring for light point/ fan point/ exhaust fan point call bell point with 1.5 sq.mm FRLS PVC Insulated copper conductor single core cable in surface/recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as requied. Group C

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC Insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required. 2 X 1.5 sq. mm+1X 1.5 sq. mm earth wire

2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A switch

15/16 A Switch

3 pin 5/6 A socket outlet

6 Pin 15/16 A socket outlet

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required

Supplying and fixing following size/ modules, Gl box alongwith modular base & cover plate for modular switches in recess etc. as required. 4 Module (125mm×75mm)

6 Module (200mm×75mm)

12 Module ( 200mm x 150 mm)

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc, as required

Installation, testing and commissioning of pre- wired, fluorescent fitting/compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc.as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC Insulated, copper conductor, single core cable etc. as required.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board Including drilling holes In cubicle panel, making connections, etc, as required. 400 A,50KA, FPMCCB

630 A, 50 KA, FPMCCB

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6 way, Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

Double Pole

Laying of one number PVC Insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Above 185 sq. mm and upto 400 sq. mm

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Earthing with Copper earth plate 600 mm x 600 mm x 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required

Erection of RCC/ PCC pole of following length in brick ballast and ramming the foundation, finishing with 150mm thick cement concrete (1:3:6) layer on top with including excavation and refilling etc as required. Above 8.0 metre and upto 11.0 metre

Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry Including bending the pipe to the required shape complete as required. 40 mm dia

MR-1: Supply of surface/pendant mounted totally enclosed linear luminaire (Ingress protection IP-65), WI0831208G1(Wipro or equivalent make BN021C LED 225 PSU CW GR

MR-2: Supplying of following star rated A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection cable, required complete and as directed by the Department [without regulator]

MR-3: Supplying of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary approved by the Deptt. as required complete and as directed by the Department.

MR-4: Supply, installation, testing and commissionig of 250Amps AMF BY PASS Panel Board made out with 1.6 mm CRCAsheet steel, 3-phase, suitable for floormounted, user front facia, powder coated for long lasting finish, cubical type, suitable cable entry provision and including of all necessary electrical protections Including. Aluminum Bus bar etc

MR-5: Supply of 250 Amps, Transformer Incoming Panel Board made out with 1.6mm CRCA sheet steal, 3-phase, suitable for floor mounted, user front facia, powder coated for long lasting finish, cubical type, suitable cable entry provision and including of all necessary electrical protections Including, Aluminum Bus bar etc. of Protection.

MR-6: Supplying including installation, testing and commissioning of 160 KVA Automatic Voltage regulator with Input Voltage Range 300 Volt to 460 Volt AC and output voltage 415 Volt, servo type,oil cooling, copper wound coil outdoor type, IP-43(Degree of protection)

MR-7: Supplying including installation, testing and commissioning of Air/Water Cooled Diesel Generator set coupled to suitable alternator of 220/415 V, AC, 1/3-Phase 0.8 p.f(la mounted on a 1) M.S. Fabricated base frame. 2) M.S. fuel tank of required capacity..3) Residual Silencer. 4) AMF Control Panel 5) Suitable batteries with lead.,6) First fill of lube oil, 7) Acoustic Enclosure complete with all accessories as specified and directed by the department conforming to IS comprising the Technical Specification... as per manufacturer. (RANGE FROM 5 KVA TO 625 KV. Kirloskar green/bliss, Leyland, Volvo Penta, Perkinson, Mahindra, Greaves, Escort engine and Kirloskar, Stamford, Leroy somer or equivalent alternator.

MR-8: Supplying of following sizes XLPE insulated and PVC sheathed aluminium conductor armoured power cable of 650/1100 V grade conforming to IS 7098 (part-1)/1988 with amendment upto date etc as required.

MR-9: Supply, installation, testing and commissionig of 160Amps Distribution Panel Board made out with 1.6 mm CRCAsheet steel, 3-phase, suitable for floormounted, user front facia, powder coated for long lasting finish, cubical type, suitable cable entry provision and including of all necessary electrical protections including, Aluminum Bus bar etc.

MR-10: Payment for First filling of Diesel in D.G. set

Power Tools and Engineering