Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.7 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹12.6 L+₹1.7 L (15.2%)Rejected-Finance 229 CHANDEL MARKET HARJINDER NAGAR KANPUR 208007 | KANPUR | KANPUR | UTTAR PRADESH | 208007 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹13.8 L+₹2.9 L (26.6%)Rejected-Finance | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹13.9 L+₹3.0 L (27.1%)Rejected-Finance 100 FT ROAD BATHINDA BATHINDA PUNJAB 151001 | BATHINDA | PUNJAB | 151001 | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹14.4 L+₹3.5 L (31.9%)Rejected-Finance | L5 | Rejected-Finance Other than lowest |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
19 Nov 2021, 6:00 pmClosed
GE (AF) E/M CHAKERI KANPUR
GE (AF) E/M CHAKERI KANPUR208008
REPAIR MAINT OF INTERNAL ELECTRIFICATION INCLUDING REWIRING AT 1 BRD HQ 4 BRD HQ 29 ED HQ N5 AND N6 AND OTHER ADJACENT AREAS AT AFS KANPUR
2021_MES_482744_1
8529/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
GE (AF) E/M CHAKERI KANPUR
As per NIT
9 documents required · 9 mandatory
₹500
Yes
GE (AF) E/M CHAKERI
₹40,000
Yes
17 Dec 2021
20 Oct 2021
25 Nov 2021
20 Oct 2021
19 Nov 2021
5 Nov 2021
Amount
Taking down old unserviceable/deteriorated batten/PVC conduit point wiring from existing place i.e. light, fan, socket or power points complete with all unserviceable fittings such as switches, sockets, ceiling rose, pendants, Holders, etc and making good all disturbed surface to wall, floor etc by means of cement mortar (1 : 3) or plaster of Peris and to match / finish new surface as the existing surface either by using same colour distemper, Putti or white / colour wash all as required complete all as specified and directed.
Taking down main switch/DB/AC box of any capacity including fixing accessories complete all as specified and directed.
M & L for concealed point wiring on wall and surface on ceiling/roof with necessary fixing arrangements with PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and including rigid non metallic white / ivory PVC conduit medium grade ISI marked not less than 19 mm dia with all conduit accessories/ fittings such as junction boxes, bends, tee, elbow etc including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.5 mm with earth dolly and Bakelite laminated sheet 3mm thick ISI marked for fixing of switches / sockets, fan regulators, wall mounting fittings, door bell & bulkhead etc with MS screw and cup washers including PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade for continuous earthing including cutting the chases and making good the surface by cement mortar (1:3) and for matching / finishing of new surfaces either by means of plaster of peris/ Putti or distemper / colour wash with same existing colour surfaces complete all as specified and directed for the following :- For one light, fan, call bell. Make of Wire : Polycab/Havells/Finolex. Make of conduit : Plaza/Kalinga/AKG
All as per item No 03 above but for one socket point controlled by one switch on independent board complete all as specified and directed. Make of Wire : Polycab/Havells/Finolex. Make of conduit : Plaza/Kalinga/AKG
All as per item No 03 above but for one socket point controlled by one switch on same board complete all as specified and directed . Make of Wire : Polycab/Havells/Finolex. Make of conduit : Plaza/Kalinga/AKG
All as per item No 3 above but for power point wiring with 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, multistranded 1100 volt grade cable and 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, multistranded 1100 volt grade cable as continuous earth lead complete all as specified and directed. Make of Wire : Polycab/Havells/Finolex. Make of conduit : Plaza/Kalinga/AKG
M & L for surface point wiring on wall and surface on ceiling/roof with necessary fixing arrangements with PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and including casing caping 20 / 25 mm white / ivory with all accessories/ fittings such as junction boxes, bends, tee, elbow etc including PVC / Polycarbonate gang box of appropriate size for fixing of switches / sockets, fan regulators, door bell & bulkhead etc with MS screw and cup washers including PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade for continuous earthing complete all as specified and directed for the following :- For one light, fan, call bell. Make of Wire : Polycab/Havells/Finolex. Make of Casing Caping : Plaza/Kalinga/AKG
All as per item No 07 above but for one socket point controlled by one switch on independent board complete all as specified and directed. Make of Wire : Polycab/Havells/Finolex. Make of casing caping : Plaza/Kalinga/AKG
All as per item No 07 above but for one socket point controlled by one switch on same board complete all as specified and directed. Make of Wire : Polycab/Havells/Finolex. Make of conduit : Plaza/Kalinga/AKG
All as per item No 07 above but in casing /caping for power point wiring with 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, multistranded 1100 volt grade cable and 2.5 Sqmm PVC-FR insulated, unsheathed, copper conductor, multistranded 1100 volt grade cable as continuous earth lead complete all as specified and directed. Make of Wire : Polycab/Havells/Finolex. Make of casing caping : Plaza/Kalinga/AKG
S&F switch flush type single pole one way 5 Amps, 240 volts, white finish complete all as specified and directed. Make : Cona/Havells/Anchor
S&F in replacement, for switch flush type single pole one way 5 Amps, 240 volts, white finish complete all as specified and directed. Make : Cona/Havells/Anchor
S&F in replacement, for switch flush type single pole two way 5 Amps, 240 volts, white finish complete all as specified and directed. Make : Cona/Havells/Anchor
S&F switch flush type 15 Amps, 240 Volts single pole white finish complete all as specified and directed. Make : Cona/Havells/Anchor
S&F, in replacement, for switch flush type 15 Amps, 240 Volts single pole white finish complete all as specified and directed. Make : Cona/Havells/Anchor
S&F socket outlet 5 pin, 5 Amps flush type white finish complete all as specified and directed. Make : Cona/Havells/Anchor
S&F in replacement, for socket outlet 5 pin, 5 Amps flush type white finish complete all as specified and directed. Make : Cona/Havells/Anchor
S&F, socket outlet 2 in 1, 3 pin, 5/15 A, flush type universal, 240 V white finish complete all as specified and directed. Make : Cona/Havells/Anchor
S&F, in replacement, for socket outlet 2 in 1, 3 pin, 5/15 A, flush type universal, 240 V white finish complete all as specified and directed. Make : Cona/Havells/Anchor
S&F, in replacement, electronic socket size, rotary, 5 speed step type regulator, 120-230 V white finish complete all as specified and directed. Make : Cona/Havells/Anchor
S&F, in replacement, ceiling rose, surface backlite, 65 x 20 mm three terminal complete all as specified and directed. Make : Cona/Havells/Anchor
S&F, in replacement, double door metallic sheet metal enclosure for DB when MCBs to be used SPN 8 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires complete all as specified and directed. Make : Legrand/Schiender/ABB
All as per item No 22 above but 4 ways complete all as specified and directed. Make : Legrand/Schiender/ABB
S&F double door metallic sheet metal enclosure for DB when MCBs to be used TPN, 4 ways, 415Volts (horizontal type) with 200 Amps rated bus bar suitable for TPN MCB / 4 pole Isolator fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs for cables/wires complete all as specified and directed. Make : Legrand/Schiender/ABB
Supply & fixing, testing and commissioning in replacement of MCB SP 240 volt 6 Amp to 32 amp 10 KA capacity having C-curve characteristics connected with suitable lugs fixed in repairs complete all as specified & directed. Make : Legrand /Schiender / ABB
All as per item No 25 above but of SP 40-63 Amps complete all as specified and directed. Make : Legrand / Schiender/ABB
All as per item No 25 above but of SPN 32 Amps complete all as specified and directed. Make : Legrand Cat No 408617 or equivalent in Schiender/ABB
All as per item No 25 above but of SPN 40 / 63 Amps complete all as specified and directed. Make : Legrand Cat No 408618 / 408620 or equivalent in Schiender/ABB
All as per item No 25 above but of TP 40 / 63 Amps complete all as specified and directed. Make : Legrand Cat No 408659 / 408661 or equivalent in Schiender/ABB
All as per item No 25 above but of TPN 40 / 63 Amps complete all as speicfied and directed. Make : Legrand Cat No 408792 / 408794 or equivalent in Schiender/ABB
S&F in replacement sheet metal enclosure , 20A single pole and neutral with a two pin and earth plug and socket complete in metal clad board fixed properly on in concealed position complete all as specified and directed. Make : Legrand/Schiender/ABB
S&F sheet metal enclosure , 32A triple pole and neutral with a three pin and earth plug and socket complete in metal clad board fixed properly on in concealed position complete all as specified and directed. Make : Legrand /Schiender/ABB
S&F in replacement metal clad socket industrial 2pin & earth plug top 20A, 230V suitable for AC Box complete all as specified and directed . Make : Legrand/Schiender/ABB
S&F in replacement metal clad socket industrial 2pin & earth plug socket 20A, 230V suitable for AC Box complete all as specified and directed. Make : Legrand/Schiender/ABB
M & L sub main wiring with two single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 2.5 sqmm drawn in new/existing MS/PVC conduit with 2.5 Sqmm PVC-FRLS insulated unsheathed multi stranded copper conductor as a continuous earth wire complete all fixing accessories such as couplers lock, nuts, sadles, pipe hooks etc fixed properly including taking down old unserviceable sub main wiring complete all as specified and directed. Make of wire: Polycab/Havells / Finolex. Note : (i) Two single core cable and one run of earth copper conductor will be measured and paid as one unit length. (ii) PVC Conduit if required shall be measured and paid separately under respective item.
M & L sub main wiring with two single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 2.5sqmm drawn through in and incl suitable size PVC casing capping and all accessories fixed on wall/floors surface along with 2.5 sqmm PVC insulated unsheathed copper conductor multi stranded cable 1100V grade as earth continuity conductor and connected to common earth dolly including taking down unserviceable sub main wiring complete all as specified and directed. Make of wire: Polycab/Havells / Finolex . Note : (i) Two single core cable, one run of earth copper conductor and one run of PVC casing capping will be measured and paid as one unit length.
M & L sub main wiring with two single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 4 sqmm drawn in new/existing MS/PVC conduit with 4 Sqmm PVC-FRLS insulated unsheathed multi stranded copper conductor as a continuous earth wire complete all fixing accessories such as couplers lock, nuts, sadles, pipe hooks etc fixed properly including taking down old unserviceable sub main wiring complete all as specified and directed. Make of wire: Polycab/Havells / Finolex. Note : (i) Two single core cable and one run of earth copper conductor will be measured and paid as one unit length. (ii) PVC Conduit if required shall be measured and paid separately under respective item.
M & L sub main wiring with two single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 4 sqmm drawn through in and incl suitable size PVC casing capping and all accessories fixed on wall/floors surface along with 4 sqmm PVC insulated unsheathed copper conductor multi stranded cable 1100V grade as earth continuity conductor and connected to common earth dolly including taking down UNSV old wiring complete all as specified and directed. Make of wire: Polycabl/Grandlay/ Gloster / Finolex . Note : (i) Two single core cable, one run of earth copper conductor and one run of PVC casing capping will be measured and paid as one unit length.
M&L sub main wiring with two single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 6 sqmm drawn in existing MS/PVC conduit with 6 Sqmm PVC-FRLS insulated unsheathed multi stranded copper conductor as a continuous earth wire complete all fixing accessories such as couplers lock, nuts, sadles, pipe hooks etc fixed properly including taking down old unserviceable sub main wiring complete all as specified and directed. Make of wire: Polycab/Havells / Finolex. Note : (i) Two single core cable and one run of earth copper conductor will be measured and paid as one unit length. (ii) PVC Conduit if required shall be measured and paid separately under respective item.
M&L sub main wiring with four single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 6 sqmm drawn in existing MS/PVC conduit with two single core 6 Sqmm PVC-FRLS insulated unsheathed multi stranded copper conductor as a continuous earth wire complete all fixing accessories such as couplers lock, nuts, sadles, pipe hooks etc fixed properly including taking down old unserviceable sub main wiring complete all as specified and directed. Make of wire: Polycab/Havells / Finolex. Note : (i) Four single core cable and two single core of earth copper conductor will be measured and paid as one unit length. (ii) PVC Conduit if required shall be measured and paid separately under respective item.
S&F rigid non metallic medium white / ivory PVC conduit medium grade ISI marked of size not less than 20 mm dia concealed position inclusive all fitting such as tee, bends, reducer, elbow, bell mouth, tube ends and all fixing accessories such as couplers lock, nuts, saddlers, pipe hooks etc fixed properly on as in concealed position incl cutting chasing & making good to disturbed surfaces & matching with the existing colour of wall/floor etc complete all as specified and directed. Make : Plaza/Kalinga/AKG
All as per item No 41 above but 25 mm dia PVC conduit medium grade ISI marked complete all as specified and directed. Make : Plaza/Kalinga/AKG
M&L for service cable of PVC insulated unsheathed weather proof twin core aluminium solid conductor 6 sqmm including taking down old unserviceable cable complete all as specified and directed. Make: Plaza/Havells/Polycab
All as per item ser No 43 above but cable size 10 sqmm complete all as specified and directed. Make: Plaza/Havells/Polycab
S&F for energy saver LED light fitting 40 watt, 230 Volts, single tube mounting including LED Tube/ LED blocks 40 Watt ,Lumen OUTPUT NOT LESS THEN 100 LM /WATT with 50000 burning Hours, PF = 0.95 complete with electronic driver LED Printed board, end cover, connector box etc and accessories, prewired, LED including required fixing arrangements and electrical connection three core copper cable from ceiling rose to led light fitting including taking down old unserviceable tube light fitting. Make: PHILIPS BN100C LED 40S-6500 PSU L120GR or equivalent in Wipro Cat Part No LL24-541-xxx-57-xx /GE
S&F for energy saving LED 4ft Batten 20 Watt with a nominal system lumen output of 2500 lumens and a minimum system efficacy of 110 lm/W with fixing arrangements and electrical connection three core copper cable from ceiling rose to light fitting. The luminaire shall have a rate system lifetime of 40,000 burning hours at L70. The luminaire should have a color temperature of 6500K and CRI>80. The luminaire shall meet IP 20 rating with THD < 10% and PF > 0.95. The luminaire housing should made of Extruded aluminium batten with a PC glossy diffuser including taking down old unserviceable light fitting complete all as specified and directed. Make : Philips Cat No : BN 021 LED 20S 6500 PSU GR S1 or equivalent in Wipro Cat Part No L20-281-XXX-65AL1 /GE.
S&F for energy saver LED Smart Batten fitting 10 watt, 230 Volts, Box type. etc and accessories, with required fixing arrangements and electrical connection three core copper cable from ceiling rose to light fitting including taking down old unserviceable light fitting complete all as specified and directed. Make : Philips Cat No BN 021 LED10S - 6500 PSU GR S1 or equivalent in Wipro Cat Part No LL20-111-XXX-65NE3 or GE
S&F for recess mounting LED Panel 600mm x 600mm fittings made of CRCA powder coated finish LED used shall be SMD type and fixture should have minimum efficiency at system level (Not chip level) 100lm/watt, life of fixture 50000 burning hours @ L70% Lumen maintenance CCT UP TO 6500,CRI MORE THEN 80,pf 0.95 and an operating voltage 140 Volt to 270 volt internal surge protection 2.5 KV AS IS 10322 and IEC 60598 system wattage 31 - 36 watt including taking down old unserviceable light fitting complete electronic drivers with all internal electric connections complete all as specified and directed. Make :Philips Cat No. RC 380 B LED 36S -6500 G4 L60 W60 PSU OD or equivalent in Wipro Cat Part No CRCO10R038HP57GL1 or GE
S&F for recess mounting 1' x 4' LED Luminaire with high transmitive diffuser suitable for indoor spaces fittings made of CRCA powder coated finish LED and fixture should have minimum efficiency at system level (Not chip level) 100lm/watt, life of fixture 50000 burning hours @ L70% Lumen maintenance CCT UP TO 6500,CRI MORE THEN 80,pf 0.95 and an operating voltage 140 Volt to 270 volt internal surge protection 2.5 KV AS IS 10322 and IEC 60598 system wattage 31 - 36 watt including taking down old unserviceable light fitting complete electronic drivers with all internal electric connections complete all as specified and directed. Make :Philips Cat No. RC 380 B LED 36S -6500 G5 L3 W12 PSU OD or equivalent in Wipro Cat Part No CRCO13R036HP57GL1 or equivalent in GE.
S&F for Endural LED bulk head fitting Plastic Body, heat resistant, with specially designed gasket including taking down old unserviceable light fitting complete all as specified and directed. Make : Philips Cat pat- WT140W LED7S NW PSU S1 PC or equivalent in Wipro Cat Part No LW07-141-XXX-57-G1 /GE
S&F bldg security light fitting 36 watt LED with pressure die cast housing IP 65 suitable for scondary road/bldgs power consumtion should not be more than 35 watt and power factor should not be less than .90 including taking down old unserviceable light fitting complete all as per specified and directed. Make : Philips Cat Part No : BRP046 LED 36 CW MR S1 PSU GR or equivalent in Wipro / GE
S&F bldg security light fitting 20 watt LED with pressure die cast housing IP 65 suitable for secondary road/bldgs power consumtion should not be more than 18 watt and power factor should not be less than .90 including taking down old unserviceable light fitting complete all as per specified and directed . Make : Philips Cat Part No : BRPO42 LED 19 CW MR S1 PSU GR or equivalent in Wipro / GE
Supply and fixing new generation, post top, energy saving environmental friendly, long life aesthetically designed with good indirect symmetrical light distribution , die cast aluminium landscape IP 65 luminaire with high power COB LED as light source of capacity 35 watt with necessary electrical connection including taking down old unserviceable light fitting complete all as specified and directed. Make: Havells cat Part No ENDURASPRING6PT35WLED757PSYMTOTG or equivalent in philips/Havells.
Supply and fix of bollard including light lamp having IP65/IK10 with base plate and making all necessary connection including fixing it in the ground with suitable clamping including taking down old unserviceable light fitting complete all as specified and directed. Make: Philips cat Part BCP150 LED150/NW PSU 220-240V 7043 or equivalent in wipro/Havells.
Supply and fix of slim profile surface mounted downlight 2000 lumen in round safe , 4000K including all fixing arrangement complete all as specified and directed. Make Philips cat Part No SM251C LED20S-6500 PSU WH or equivalent in wipro/Havells.
Receiving complaints from concern Incharge of Internal section (Power House) lodged by the occupants of Internal electrification nature, taking down tube light / CFL fitting/Bracket fittings/Flameproof tube light fittings/ bulkhead flameprrof fittings any wattage from roof /wall and PVC Cables for light/fan/bell/light or power socket complete repairs to the extent by removing connections from the system removing faults in wires, battens, conduit, suck boxes, juction boxes, main switches, MCBs/DBs utility light fitting, lamp holders AC ceiling/exhaust fans and other connected fixtures of the internal electrification including providing of petty stores such as wires of appropriate size and conductor matching to existing one upto the length of 1 mtr including insulation tap, screws, nuts as required to rectifing the fault with record to the complaint lodged and refixing of fittings, fixture to their position as dismantled complete all as directed at site to the entire satisfaction of Engr-in-charge/users. dismantling at site testing of unserviceable item and serviceable and replacement the same and tightening the connections,replacement of unserviceable connecting wire and ensuring the the earth wire is properly connected to earth wire and metallic part of fitting, cleaning of fittings externally and internally after ensuring the serviceablity of fittings & refixing the same at same place or as directed place testing complete all as specified and directed. Note - (i) Any type, switch socket, bell push, regulator Choke any type, required for replacement will be paid under relavent item as s&f in replacement of this schedule.
M&L for bracket made out of GI pipe 25mm dia medium grade, 1.2 mtr long bent to shape with welded MS flat 25 x 4 mm for mounting of fitting & MS flat iron clamps made out of 25mmX 4mm thick FI nuts, bolts complete all as specified and directed incl taking down old unsv bracket of any size.
M&L for sheet metal enclosures for independent mounting for MCBs four pole fixing with suitable nut & bolt with washers on wall / panels and suitable connection arrangements for XLPE under ground cables with MCBs including removing UNSV switch fuse unit complete all as specified and directed.Make : Legrand Cat Part No 507793 or or equivalent in Schiender/ABB Note : MCBs shall be measured and paid separately.
S&F sheet metal enclosure TPN MCCB DB 8 Way , 415 volt (vertical type) with 250 A bus bar double door type IP 43 -IK 09 for DB when MCBs and MCCB upto 160Amp (as incomer) to be used fixed properly on/inconcealed position and to provide required sizes of flexible conduit at any open surface near DBs for cables/wires complete all as specified and directed. Make Legrand Cat Part No 507747 or equivalent in Schiender/ABB
S&F sheet metal enclosure TPN MCCB DB 4 Way , 415 volt (vertical type) with bus bar double door type IP 43 -IK 09 for DB when MCBs and MCCB 160 Amp (as incomer) to be used fixed properly on/inconcealed position and to provide required sizes of flexible conduit at any open surface near DBs for cables/wires complete all as specified and directed. Make Legrand Cat Part No 507745 or equivalent in ABB/Schinder
Supply and fixing MCCB 160 Amps, 4 Pole, 415V, 25 kA , Ics =100 % Icu complete all as specified and directed. Make : Legrand Cat No or equivalent in Schiender/ABB
Supply and fixing MCCB 125Amps, 4 Pole, 415V, 25 kA , Ics =100 % Icu complete all as specified and directed. Make : Legrand Cat No 625349 or equivalent in Schiender/ABB
Supply & fixing, testing and commissioning of RCCB Four pole 415volt 63 Amp , 30mA capacity having C-curve characteristics connected with suitable lugs including taking down old unserviceable RCCB complete all as specified & directed. Make : Legrand /Schiender / ABB
A.B.Enterprises
H S ENTERPRISES
KAMAL TRADING CO.
SAKSHAM SUPPLIERS BUILDERS
BRIGHT TRADRES
NEW TECH ELCTRICALS
PAWAN COOL CORPORATION
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .