Special repair of the existing toilet block at APS Fazilka senior wing.

Amount

Taking down chowkats or frames n. exc 1.5 sqm each with shutters (without taking off shutters from the frame).

Taking down chowkats or frames exc. 1.5 sqm but n. exc 4 sqm each with shutters (without taking off shutters from the frame).

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary SS screws shall be paid separately)

Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engineer-in-charge.

Supply and fixing to 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as per directions of Engineer- in-charge.

S & F anodised aluminium window / ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws. fixing arrangememt for wire mesh etc. and making good disturbed surfaces of walls complete all as specified.

S&F 4.8mm thick sheet glass frosted on one side ordinary quality fixed in aluminium window/ ventilator cut to required size and fixed with PVC/Neopane gasket etc. complete all as specified.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm with stainless steel wire staples

S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.

S&F 200mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.

S&F extruded aluminium alloy handle 150mm size fabricated type, anodised, ISI marked .

S&F Aluminium anodised barrel tower bolts 150mm long of extruded section and fixed

S&F Aluminium anodised barrel tower bolt 200mm long of extruded section and fixed

S&F 100 mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete

Taking down cement plaster or cement lime plaster on PCC / stone surface / brick surfaces including raking out joints hacking for key scrubbing down with water including removal to debris to a distance n. exc 100 m and deposited where directed by Engineer-in-Charge.

M&L for rendering 12 mm thick in CM (1:6) on fair faces of brick work or concrete surfaces of wall, finished even & smooth (without using extra cement).

M&L for rendering 10mm thick in cement mortar (1:3) on concrete surfaces including finished fair & even on ceiling.

M&L for preparation of new plastered surfaces of walls by washing, rubbing down & applying two coats of distemper oil emulsion over a coat of 2 mm thick wall care putty (in two coats each coat of 1 mm each) on plastered surfaces of wall complete all as specified.

M&L for preparation of new plastered ceiling surfaces by washing, rubbing down & applying two coats of distemper oil emulsion over a coat of 2 mm thick wall care putty (in two coats each coat of 1 mm each) on plastered surfaces of ceiling complete all as specified.

Dismantling floor, hearth or wall tilling incl cement mortar beding (but not backing), removing serviceable tiles to store and rubbish off the premises as directed by the Engr-in-Charge

S&F non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, in floors etc. over 15mm thick screed bed in CM 1:6 and set and jointed in neat slurry and pointed in white or coloured cement to match

M&L Glazed ceramic joint free coloured/printed tiles in vertical surface of size 450x350x7 mm thick set and jointed in neat cement slurry over 15mm thick rendering in cement mortar (1:4) and pointed in white or colour cement to match the colour of tiles complete all as specified.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store of following sizes :-

(a) 15 mm bore

(b) 20 mm bore

(c) 25 mm bore

M&L for new 15 mm bore galvanised steel water tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors

(a) 15 mm bore

(b) 25 mm bore

S&F in repair 15 mm bore chromium plated bib tap fancy type cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed.

S&F in repair 15 mm bore pillar taps fancy type, cast copper alloy, suitable for counter top wash hand basin complete.

Taking down the existing unserviceable stop valve and S&F 15 mm bore fancy type, chromium plated stop valve/Angle valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed.

Dismantling of old flushing cistern and S&F PVC low level flushing cistern 10 ltrs capacity with inlet ball valve float & handle, syphonic action type including brackets & flush pipe of polythelene of low or high density or PVC 32mm dia for LLFC

Demolition of old existing unserviceable Indian type WC and S & F vitreous china squatting pan, 'Orissa' pattern, size 580x440 mm white, with integral foot rests, 'P' or 'S' trap, including connection to trap, and to flushing pipe, anti-syphonage pipe.Complete making good to floor with PCC,Lime concrete bedding complete all as specified and as directed by Engineer-in-Charge.

S&F towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90 gms)

S&F grating doom 100mm dia of PTMT weight not less than 25gm with or without hole.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoin jambs pillars etc.

M&L for Brickwork with flyash bricks old size, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4

Demolition of RCC roofs, floors (other than ground floors), beams staircases, landing, chajjas, and similar suspended work complete all as specified and as directed by Engineer-in-Charge

Cutting or uprooting grass incl removing old mud phuska of any thickness, removing rubbish off the premises, cleaning surface and preparing to receive new treatment complete as specified.

Removing building materals etc. to a distance exc. 100 m and n exc. 1.0 Km beyond the lead included in the rates, including loading, unloading and stacking at the destination

M&L for Granite (of any type) work (table rubbed and polished) 20 mm thick in risers & treads of steps, jambs, pillars, window cills,cooking platforms and similar works in CM 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite including 20mm thick screed bed (bedding layer) in CM 1:4 all as directed.

Dismantling of old wash hand basin any size and S&F vitreous china wash hand basin white colour of counter top type fixing complete. Make : Jaquar CNS-WHT-903 or equivalent

S&F Waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms)

S&F 32 mm dia low density polyethylene pipes for wash basin waste pipe connection etc complete all as specified and directed.

Dismantling of old urinal any type and remove from site.

Dismantling of old existing EWC any size and S&F vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern & flush pipe)

S&F in repairs Plastic water closet seat, white, closed pattern with recessed bottom, & cover & mild steel CP or aluminised hinging device

S&F EWC jet spray complete all as specified and directed.

S&F in repairs Soap dish, 100x100x60 mm fixed to wall with plugs with chromium plated brass screws

S&F PVC connection 15 mm size with PTMT nuts of length 450 mm long

S&F PVC connection 15 mm size with PTMT nuts of length 600 mm long

Dismantling water tank exc 250 ltr but nexc 500 ltr

S&F Rotational moulded polyethylene water storage tanks 500 Ltr white colour with threaded cover (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR part - I and directed by Engineer in Charge.

S&F Nipple 25mm bore suitable for HDPE water tank. (min. weight 25mm-65gms)

S&F 20mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed

M&L PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in rectangular/circular raised platform of height 20 cm and dia 20 cm more than the external dia of tank for PVC tank of capacity 500/1000 litres, surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.

Dismantling of cast iron drain pipe of size upto 100mm bore, jointed in CM and taking out of trenches, if required complete all as specified and as directed by Engineer-in-Charge. (Note:- Excavation & earthwork if any shall be measured and paid separately.)

S&F in repair UPVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, Type 'B', ISI marked of 110 mm bore.

S&F UPVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors Type 'B', ISI marked of 75 mm bore.

S&F UPVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, Type 'B', ISI marked of 75 mm bore.

S&F UPVC (SWR) bend of any radius of 110mm bore.

S&F UPVC (SWR) bend of any radius of 75mm bore.

S&F UPVC (SWR) vent cowl of 75 mm bore.

M&L 75 mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete.

Excavation in trenches, not exceeding 1.5 metre wide and not exceeding 1. 5 metre in depth; for foundation or for manholes not exceeding 10 Sqm on plan and not exceeding 1.5 metre in depth and getting out in soft/loose soil complete all as specified and directed by the Engineer-in-Charge.

Returning filling in, including spreading, levelling, watering and well ramming in layers each not exceeding 25 cm depth in soft/loose soil complete all as specified and directed by the Engineer-in-Charge.

Removing surplus spoil to distance not exceeding 50 metre and depositing where directed at level not exceeding 1.5 metre above the starting point complete all as specified and directed by the Engineer-in-Charge.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete pipe) set in cement mortar for 150 mm dia pipe or less complete all as specified and as directed by Engineer-in-Charge.

S&F 150 mm dia Reinforced concrete pipe Class NP-2 with one collar per length joint with CM 1:1 with spun yarn and complete tested complete all as specified and as directed by Engineer-in-Charge.

M&L for cement concrete 1:3:6 type C-2 (using 40 mm graged stone aggregate) as in concrete bed to drain pipes of 150mm bore including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed by Engineer-in-Charge.

M&L 25mm thick cement concrete flooring 1:2:4 type B0 using 12.5mm graded aggregate on roof slab

M&L rendering 15mm thick water proofing plaster in CM 1:3 on slab/roof admixed including and with Dr. Fixit pidilite LW+ @ 200 ml per bag of cement or equalent

Preparation of roof top surfaces, providing and applying UV stable single component smart care damp proof ultra is a fibre reinforced elastomeric liquid applied water proofing membrane formulated with PU hybrid polymers and reinforcing acrylics fibres and having SRI of 106 on top of concrete roof surface in three coats including self primer at ratio of damp proof and water 3:1 and coverage @ 1 Ltr/10 sqm with a thickness of 650 micron. Note : 6 Hrs interval between two coats will be maintain & the work will be carried out through company applicator duly got approved from accepting officer in writing before incorporation and paid only after receiving of the warranty certificate from the company. Make : Asian paint or equivalent as approved by GE

Taking down carefully existing aluminium/Copper point wiring light, fan socket or power bell complete with fitting such as sockets, ceiling roses, pendants batten holders regulators socket, call bells & making good to the disturbed surfaces of walls, matching the colour with existing Surface all as spd and directed by Engr-in-Charge. Note: Rate for making good shall be deemed to be included in this item rate.

M & L for point wiring complete with 1.5 Sqmm (Nominal area) PVC insulated multustranded fire retardant (low smoke unsheathed and multicore copper conductor cable with colour code ISI marked and including PVC concealed conduict ISI marked and conduit fittings for one light point/fan point/exhaust fan controlled by one switch including PVC insulated 1.5 Sqmm single core copper earth wire to common earth and connecting to earth dolly and including suitable MS sunken box of suitable size and covered with & including 3 mm thick bakelite, laminated hylem sheet top cover etc complete all as specified (Cost of MS sunken box and bakelite sheet included in the rate).

All as per Srl item No.78 here-in-before but one three pin socket outlet 5 Amps on the same board complete all as specified.

S&F switch Piano type single pole one way 5 Amp,230 Volt AC supply.

S&F socket two in one ,3 Pin 5 Amps 230 Volt AC supply, .

M&L for Ceiling Rose, surface bakelite 02 to 3 terminal, 240 volts, 5 Amp complete all as specified and directed.

S & F of MCB suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA and 6 to 32 Amps all as specified and directed.

S & F of MCB suitable for 240 volts AC supply, SPN with over load and short circuit protection and rupturing capacity not less than 10 KA and 16 to 40 Amps all as specified and directed.

S&F Distribution board double door made out of CRCA mild steel sheet surface with insulated material like polyester or with powder coating surface mounting SPN 8 way 240 volts with bus bar rating 200 Amps dust and vermin proof suitable for incorporation of MCB's and isolators etc complete all as specified and directed..

M & L for Sub main wiring with 2 single core 6 Sqmm PVC insulated FRLS cable with multicore copper conductor drawn into and including PVC conduit rigid non metallic of suitable dia with and including independent PVC insulated one run 6 Sqmm single core copper earth wire complete all as specified. (Note:- 1.Three lengths of 6 sqmm cable and will be measured as one length. 2. Surface condiut/Casing capping included in the item rate.

Supply and fix exhaust fan, steel body AC single Phase. 230 V of size 300m sweep with, blades, and frame and louvers complete all as directed by Engr-in-Charge.

M&L for round type series downlight of capacity 15 Watt with low depth , powder coated glare finish to deliver warm white (pale yellow) ilumination with optimized heat sink for efficient heat dissipation suitable for toilet block complete all as specified and directed by Engr-InCharge Make: Havells/Crompton Greaves/Bajaj/ Philips/Wipro Cat Part No:LHEBAIPNIZLW015

M&L for WEE Plus LED bulk head luminaire of capacity 10 Watt an ideal energy efficient solution for upgrading conventional GLS bulkhead luminaires to LED bulk head IP 65 complete all as specified and directed by Engr-InCharge Make: Bajaj BIBWP LED 10W WH or equivalent in Havlls/Crompton Greaves/ Philips/Wipro.

Supply &fixing warm white LED Strip 30 W LED surface light fitting Indoor decorative type light fitting for mirror illumination complete all as directed by Engr-in-Charge.

Supply and fixing GI pipe galvanised " Medium grade " with all fitting laid in trenches of size 25 mm dia bore.

SHRI SHYAM CONSTRUCTION CO.