WBPWD/EE-WKED/NIQ-09/2020-21

Amount

Dismentling the old damaged electrical wirings (app 280pts) including derated panel,distribution boards,fittings & fittings & fixtures from their original position and mending good the damages as per direction of EIC.

S & F 32 A,415V TPN sheet steel main switch with fuse on L & link on N (Havells/HPL ) on flat iron frame on wall

S & F 15/16A 240V DP sheet steel main switch with fuse on L & link on N (Havells/HPL ) on flat iron frame on wall

Supply and fixing double door horizontal 2+8 Way SPN MCB Distribution board with IP -42/43 protection, concealed in wall after cutting the wall & mending good damages to original finish incl. inter connection with suitable size of copper wire and neutral link & provision for earthing attachment as per direction of EIC. Incommer i) 32A,Double pole MCB Isolator- 1 No. Outgoing i) 6A -16A ,10 Ka, ‘ C’ curve SPMCB - 8nos. (Make - Cabtree/Schneider/ABB).

Supply and fixing double door horizontal 4Way TPN MCB Distribution board with IP -42/43 protection, concealed in wall after cutting the wall & mending good damages to original finish incl. inter connection with suitable size of copper wire and neutral link & provision for earthing attachment as per direction of EIC. Incommer i) 40A,4 pole MCB Isolator- 1 No. Outgoing i) 6A -32A ,10 Ka, ‘ C’ curve SPMCB - 12nos. (Make - Cabtree/Schneider/ABB).

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (approved make) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand & Colour approved by EIC) fixed on Modular switch board on wall complete with 2 no. “Ph & N” copper bar with top cover plate making earthing attachment fixed on wall incl. mending good the damages to original finish [only PVC Rigid Conduit on ceiling and remaining portion concealed]

i) Average Run 9mtr

ii) Average run 6 mtr

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand & Colour approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 6A 3 pin Modular type Plug Socket & Switch(Brand approved by EIC) on 4 Module GI switch Board with 3/4 Module top cover plate on wall incl. painting and mending good the damages to original finish

On Board

Average run 7.5 mtr

S&F 250V 12 module computer board(Brand & Colour approved by EIC) of comprising of following accessories a)16A switch &socket---1 Set b)6A,-------do------------(--do--)-----2Sets c)Indicator------------------------------------1Set Incl. Necessary interconnection by PVC insulated copper wire flushed in wall as required.

Supplying & fixing 250 V 3/6 Pin 5/15 A Modular type plug socket with 15 A modular type (Brand & Colour approved by EIC) switch on fixed on metal flush box (modular type switch board) 3 or 4 module moduler surrounds on wall incl. necy. connections and making earthing attachment flushed in wall incl. mending good damages to original finish.

Supplying & fixing 250 V 20 A Modular type plug socket with 20 A modular type (Brand & Colour approved by EIC) switch on GI metal flush box (modular type ) 3 or 4 module moduler surrounds on wall incl. necy. connections and making earthing attachment flushed in wall incl. mending good damages to original finish (for Provision of AC & Geyser)

Supplying and Drawing 1.1 KV single core stranded ‘FR’ PVC insulated & unsheathed single core stranded copper wire ( brand approved by EIC) of the following sizes in suitable size polythene pipe embeded in wall / Regid PVC pipe complete on surface of wall with all accessories partly embedded in wall partly surface incl. mending good damages to original finish and making necy. Connection as required as per direction of EIC.

2 x 1.5 sqmm + 1 x 1.5 sqmm

2 x 2.5 sqmm + 1 x 2.5 sqmm [For power plug and computer board ]

2 x 4 sqmm + 1 x 2.5 sqmm [For ac & Geyser]

4 x 6sqmm + 2 x 4sqmm [ for pump starter, meter loop & Main switch to TPN DB]

4x25 sq mm +2 x 6 sq mm (from EM to Main switch)

S & delivery of single/Twin LED fittings with all accessories including supply of LED lamp lamps and all accessories(make:-Philips/Crompton/Bajaj/Wipro)

a) single fittings (cat No.- TMC-501P 1xT-LED 20W P3241, make Philips or similar of Bajaj/Wipro) with lamp

a) Twin fittings (cat No.- TMC-501P 2xT-LED 20W P3242, make Philips or similar of Bajaj/Wipro) with lamp

S&F 240V 230 mm sweep 920 rpm heavy duty AC exhaust fan (Make- EPC/Crompton Greaves) after making hole and mending good damages to original finish incl. S&F Al. louver shutter as per direction of EIC.

S&F of 240V, 48" sweep AC ceiling fan (Orient PSPO - New Breeze / Summe rcool or Crompton Greaves-Aura / Usha -Stricker +), as directed by EIC.

S&F Modular type fan regulator Step type 100W (Brand & Colour approved by EIC) on existing moduler sheet metal switch board incl. making necy. Connections etc. as per GS.

S&F LED flood light luminarie with high pressure die cast housing with IP 66 incl along with S&F suitable angle iron fixing arrangement from parapet as dirtected by EIC .(Make-phillips .cat no PHILIPS BVP383 400w LED Flood Light 6500K(Cool White), IP Rating: IP66 or similar spec of Crompton/Bajaj/Siska)

S&F LED street light luminarie with high pressure die cast housing with IP 66 incl.(Make-phillips .cat no PHILIPS BRP409 60Watt LED street Light (Cool White), IP Rating: IP66 or similar spec of Crompton/Bajaj) on the existing pipe bracket

S&F LED flood light luminarie with high pressure die cast housing with IP 66 incl .S&F suitable fixing angle iron arrangement from wall as dirtected by EIC .(Make-crompton .cat no LSTN 90 W LED or similar spec of philips/HAVELLS)

Supply and fixing of 40W post top cool day light lantern with necessary fixing arrangement on two nos. gates (Philips/ Crompton/ Havells/K-lite)

S&F angular batten holder (Approved make) on 75mm dia PVC round block / round bakelite on wall with S&F of 14W LED lamp (Philips/Bajaj/Wopro) as directed by EIC.

Supply and fixing of 250V Timer DB with steel sheet enclosure double door , phosphitised powder coated , neutral bar, DIN Rail with IP-43 protection for COMPOUND LIGHT control comprises of i) 1 no. 15A Switch for manual mode operation on outside door, ii) 1 no. 25A DP MCB ('C' Curve, 10 kA,), iii) 1 no. 24 hours programmable electromechanical Time Switch with minimum switching time of 15 minutes. iv) 1 no. 25A TP Power contactor. v) 1 no. Auto/ Mannual bypass 25A DP MCB Changeover Switch vi) Provision for earthing attachment including LED indication light for running condition with railway locking arrangement. Suitable DB size selction with internal wiring by appropriate Copper wires along with connectors/lugs to be fixed maintaining recommended clearance as per IS. Make:- Hager/ ABB/ L&T

Supply & fixing of 415V, 100A, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts & bolts etc .S & F 3 nos DIN type HRC fuse as per rating (make- L&T)

S & Laying 1.1KV gr. 3Core XLPE Ar./Al. Cable on wall surface by GI clamping arrangement partly embeded in wall incl. making connections as reqd. [EIC approved Brand]

16 sqmm[ for Compound light]

S&F of compression type cable gland complete with finishing the ends of the following cables by crimping method as per direction of EIC as below:

For 3C, 16sqmm XLPE cable

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), incl. 240 V,25 A, 3 pin modular type top (Brand approved by EIC) with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy.connections with PVC Cu wire and earth continuity wire etc. as per direction of EIC.

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level incl. excavation approx 1mtr3 of soft soil & restoring surface duly rammed By ISI-Medium GI pipe as directed by EIC.

Supplying & Fixing 250 V AC/DC superior type Call Bell (Anchor-8320) on HW board incl. S&F HW board

S&F power unit for Room Air-conditioner machine on MS/PVC box comprises with OLP single phase starter incl. earthing attachment (Ultratech/Electron)

Supplying and Fixing GI water proof looping cable box having hinged GI Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. of the following sizes as indicated below, Comprising of one 250 V, 15 A Kit-Kat fuse unit, one NL on porcelain insulator etc. and housing the same in pole muffing incl. addition and alteration to the existing CC muffing (6:3:1) after dismantling the damaged looping cable box etc. where necy. incl. painting. a)200x150x100mm

S & F 40mm dia GI pipe bracket (1.5 mtr long) with two nos. Clamping arrangement for fixing of bracket on wall

Supply & Delivery of Thermal Imaging Scanner having following Specifications:- (i) Operating temperature: -10 º C to + 50 º C (14º F to 122ºF) (ii) Storage temperature: -20 º C to + 50 º C (4º F to 122ºF) (iii) Relative Humidity: 10% to 95%, non-condensing (iv) Spot temperature: Yes (v) Safety standards: EN 61010-1: CAT none,pollution degree 2, EN 60825-1: Class 2,EN 60529, EN 62133(Lithium Battery) (vi) Electromagnetic compatibility: EN 61326-1: 2006, EN 55011: Class A, EN 61000-4-2, EN 61000-4-3 (vii) C Tick: IEC/EN 61326-1 (viii) US FCC: EN61326-1; FCC Part 5, EN 55011: Class A,EN 61000-4-2, EN 61000-4-3 (ix) Vibration & shock: 2G, IEC 68-2-6 and 25G,IEC 68-2-29 (x) Drop: Engineered to withstand 2 m (6.5 ft) drop (xi) Size(H x W x L): 26.7 x 10.1 x 14.5 cm(10.5 x 4.0 x 5.7 inch) (xii) Weight(batter included: Fixed focus 0.72 kg(1.6 lb); Manual focus 0.77 kg(1.7lb) (xiii) Enclosure rating: IP54 (xiv) Warranty: 2 Years Make: Fluke Model TiS 20

Electromech Engineers Co-Operative Society Ltd.

M/S R.N. ROY ELECTRICAL CONTRACTOR

T.D.K. ENTERPRISE

NEW INDIA ELECTRICAL AND ENGINEERING WORKS