INTEGRATED COMPREHENSIVE MAINT OF CERTAIN BLDGS AT BRD (AF) TUGHLAKABAD UNDER GE (AF) TUGHLAKABAD

Amount

Taking down chowkats or frame with shutter (without taking out shutter from the frame) exceeding 1.50 sqm and n exc 4.00 sqm each and removal from site all as specified and directed

Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each and removal from site all as specified and directed

Taking down or up 15 mm bore galvanised iron tubing and connection including cleaning for refixing or removal all as specified

All as per item No 3 here in before but 20 mm bore

Demolition of concrete is reinforced (Reinforcement cut as required to faciliate demolition) of any descrition and in any position not other wise specially provided for complete all as specified and directed by Engineer in Charge All dismantling/demolished material removed from MOD land completely.Rate of removal outside side from MoD land deemed to be included in the same item.

Taking down cement plaster including raking out joints hacking for key and scrubbing down with water complete as specified and directed.

Taking down rain water pipe and eaves gutters (any size and pattern) including all fittings heads shoes bends swan necks etc complete all as specified and as directed.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) All dismantling/demolished material removed from MOD land completely.Rate of removal outside side from MoD land deemed to be included in the same item.

Dismantling of cast iron drain pipe of 150mm bore jointed in lead joints or cement joints and taking out of under floors if required

Demolition of brick work or stone/boulder masonry, built in cement mortar incl. all quoins arches, pillars etc. but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and directed.

M&L for Precast RCC slab, landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs,mangers, shelves type B1(1:2:4) and similar articles with plain faces set in cement mortar 1:4 all as spfd and directed

M&L TMT steel bars 10mm dia and over cut to length bent shape required, including cranking bending binding with mild steel wire (annealed) not less than 0.9mm dia quality conforming to relevant IS complete all as specified.

S & F 500 ltrs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top )including dismantling and hoisted and fixed in position etc complete all as per specified and directed.

S & F GI tubing medium grade with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified.

All as per serial item 14 here in before but 20 mm bore.

S & F in repair 20 mm bore ball brass valves (Float valve) high pressure with polythene float and fly nut complete screwed to iron pipe or brass ferrule complete all as specified

S & F in repair 20 mm bore Gun-metal, globe or gate valve with iron wheel head, screwed both ends for ironc pipe all as specified and as directed

S & F for factory made solid PVC door frame of size 50mm x 47mm made out of 5mm prelaminate PVC sheet, reinforced with MS square tube fixed in opening with smooth finish complete as per manufacturer's specifications and as directed by Engineer-in-Charge

S & F Factory Made Solid PVC Moulded Door Shutter with particle board, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing specified in SSR and as directed by Engineer-inCharge

S&F, 100 mm long butt hinges, extruded alminium alloy with galavanised mild steel hinge pin, anodised and fixed , type C-21

S&F 150 mm size aluminium handles, cast type anodised and fixed.

S&F 150 mm long aluminum, anodised,barrel tower bolts of extruded section and fixed.

M & L for PCC 1:2:4 type B1 in lintels upto 1.5m clearspan, cills, steps; seismicand other similar bands,plinth courses, string courses,lacing courses, parapets andrailings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs water troughs and the like including weathering, slightly rounded or chamfered angles complete all as specified and as directed.

S&F floor door stopper of alluminium alloy body and tongue anodised with hard drawn steel spring over all length 140mm complete all as specified and as directed.

S&F Aluminium Anodized powder coated aluminium frame for doors , windows, ventilators, partion wall with one or more rebates including joining cleat for fixing etc completet all as specified. (thikness of powder coating is 50 micron)

S&F anodised aluminium powder coating of any colour (Thickness of powder coating not less than 50 micron) window and ventilator shutter side hung type suitable for glass pan without sashbar, aluminium sections weighing 0.55kg/m incl necessary joining cleat glazing clips, rubber neoprene packing, alumimium anodised snap beading, screws , peg stay 150mm long -1 No, hinges type B-21 100mm long -2 Nos, suitable handle -1 No complete all as specified handles 1 Nos in each window, hinges, aluminium snap beading screws complete all as specified.

S&F anodised aluminium powder coating of any colour (Thickness of powder coating not less than 50 micron) window and ventilator shutter side hung type suitable for wire mesh without sashbar, aluminium sections weighing 0.55kg/m incl necessary joining cleat glazing clips, rubber neoprene packing, alumimium anodised snap beading, screws , peg stay 150mm long -1 No, hinges type B-21 100mm long -2 Nos, suitable handle -1 No complete all as specifiedhandles 2 Nos in each window, hinges, aluminium snap beading screws complete all as specified.

Supply and fixing 7mm thick aluminium grill of make ' Deco grill DG-104 model fitted in to suitable aluminium channel and fixed to windows / ventilators including channel complete all as directed by Engr-in-charge.

S&F 4.0 mm thick plain sheet glass panes and glazing with oil putty in square not exceeding 0.5 sqm in each pane and fix in aluminium door / window/ventilator complete all as specified.

S&F 4.0 mm thick Figured glass, pin head type and glazing with aluminium beadding screws or oil putty in square not exceeding 0.5 sqm in each pane and fix in aluminium door / window/ventilator complete all as specified.

S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples and fixed with tinned tacks ro galvanised wire stapple

M&L for 10mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces finished even and smooth without using extra cement all as spfd and directed.

M&L for 15mm thick rendering in CM 1:4 on other than fair faces of brick or concrete surfaces finished even and smooth without using extra cement all as spfd and directed.

M & L for 75 mm thick PCC 1:3:6 type C2 as in plinth protection finished even and smooth without using extra cement as specified

S&F in repair false ceiling with semi perforated 12mm thick micro tegular edged GRG false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm , suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in Charge.

S&F in repair PVC wall lining joint free consisting of 5mm thick color PVC sheet inclusive of solvent adhesive/scews and fixing at site on PVC frame as per specification and drawing. Note : Pattern/design and color shall be approved by Accepting Officer. No Extra shall claim by the contractor for same.

S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing.

S&F in repair frameless glazed door with 12mm thick toughened glass door,edged polished around, hung type, frosted with designer logo(any pattern, approx frosted area 1.6 Sqm ) including taking down existing door with frame of any description and necessary glass hardware for new as appended below compete all as specified and directed:- (a) SS handle 'D' type on both leaf glass shutter and both face (CAT No :- OGH-11,Make OZONE or equivalent), size (25mm x 450mm) (b) Path with Pivot with complete accessories for swing door as required (c) Concealed floor spring for glass door (for max door width 1200mm (Cat No OCFH-100, Make OZONE or equivalent) with accesories (d) Patch lock to lock swing door with accesories (g) Making good of wall surface to match with existing surface complete. Note : -( All the glass hardware make of 'OZONE' or its equivalent )

S&F in repair of 75 mm bore cast iron drain drain/waste/vent pipes fixed to wall, floor jointed with lead joints incl dismantling of old cast iron drain,waste, vent pipe of any description , jointed with any material .

S & F cast iron floor trap with graating of 75 mm size including jointing to waste pipe with cement joints etc complete as directed

S & F cast iron floor trap with graating of 100 mm size including jointing to waste pipe with cement joints etc complete as directed

S & F 100 mm bore cast iron bends of any radius diminshing pieces or tappers (larger bore measured) fitted with access door complete all as specified and directed

S&F in repair of Cast iron branch pieces , tee equal or unequal spigot or socket type or with parallel branches to 100 mm dia pipe fitted with access door complete all as specified by Engineer-in -Charge .

S&F in repair vitreous china wash basin under counter oval type (536mm X 435 mm) , white, flat back, size 550 mm x 400 mm fixed over granite and including cp waste coupling, waste fitting and union complete all as specified and as directed.

S&F deck mount type pillar tap mixer cast copper alloy for iron pipe pipe and fixed with 15mm bore in repairs all as directed.

S&F 32 mm bore of pipe low density (LDPE) of pressure rating 6 kg/ sqcm fixed to wall or floor etc including fittings complete all as specified and as directed.

S & F 32mm dia waste fitting brass chromium plated for basin with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed.

S & F in repair PVC connection 15 mm size with CP nuts of length 600 mm etc complete all as specified.

S&F bib tap long body of CP fancy type with butterfly handle screwed down screwed for iron pipe of 15mm bore fixed in repairs

S&F angle valves CP screwed down high pressure of fancy type chromium plated screwed both ends for iron pipe or for union and fixed in repairs with 15 mm bore

S&F two way angle cock CP screwed down high pressure of fancy type chromium plated screwed both ends for iron pipe or for union and fixed with 15mm bore in repairs

S&F in repair of CP soap tray fixed to walls with rubber plugs complete all as specified and directed.

S & F of wall mixer 15mm bore dia cast copper alloy with cap capston chromium plated screwed down high pressure with or withou letter Hot and Cold with long screwed and fly nuts screwed for iron pipe complete all as specified and as directed.

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe,overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F in repair brass chromium plated tubular towel rail 20 mm dia D type, 60 cm long between flanges complete all as specified and as directed.

S&F in repair colour venetian blinds of 100mm width of strip with frame and fittings fixtures complete all as sfpd and directed

M&L in repair for mild steel, plain, black sheet 1.60 mm thick in valley gutter, and similar work, cut to size, holes punched joints with riveted or welded seams, including bending or turning up, mitered angels etc, as required complete all as specified and directed by Engr-in-Charge. Note: All joints to be sealed by silicon sealant to the satisfication of Engr-in -Charge

S&F mild steel framed brackets of angles tees flat iron square bars etc cut to shape including bending and welding angles as necessary gusset plates reviting, complete all as specified and directed by Engineer-in-Charge.

Taking up cast iron water mains (including all fittings) with spigot and socket ends and lead recovering lead complete all as specified and directed by Engr-in-charge.

S&F 150 mm bore cast iron rain water pipes in any length with or without ears with cement joints fixed to walls, complete all as specified and directed by Engineer-in-Charge.

S&F 150 mm bore DI rain water pipes in any length with or without ears with cement joints fixed to floor, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 150 mm bore CI Bends (any radius) with duck's foot or heel rest (ISI marked), complete all as specified and directed by Engineer-in-Charge.

S&F for stain less steel kitchen plate rack Size 24 inchx 30 inch size complete as directed by Engr -in-Charge

S&F in repair vitreous china wash down water closet pal (pedestal pattern) white (excluding fixing bolts flushing cister and slush pipe) with seat cover with CP screw

S & F in repair PVC low level cistern of 10 lit capacity inclusive of brackets and PVC bend long type and connectin to flush pipe of any size and pattern with inlet ball valve float and handle etc complete all as specified & directed.

S&F in repair CP jet spray with flexible tube 1.5 mtr long complete all as specified and as directed.

S & F 110 mm bore of pipe PVC (SWR) pipes double socket in any length with rubber ring joint fixed to walls with MS clamps as directed

S & F 110 mm bore of pipe PVC (SWR) bends with access door of any radius / shoe fixed to PVC pipes as directed

M&L of glazed ceramic coloured tiles 7mm thick 450 x 300mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade. Etc including 10 mm thick rendering in CM 1:4 including dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), All dismantling/demolished material removed from MOD land completely

M & L Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors over 15 mm thick screed bed in CM (1:6) etc set and jointing in neat cement slullry and pointed in white or coloured cement to match, including dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), All dismantling/demolished material removed from MOD land completely

M & L Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors over 10 mm thick screed bed in CM (1:4) etc set and jointing in neat cement slullry and pointed in white or coloured cement to match, including dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), All dismantling/demolished material removed from MOD land completely

S&F non skid ceramic coloured tiles of 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm with 15 mm thick Screed bed or bedding layer in CM (1:6) set and jointed in neat cement slurry and pointed with white or coloured cement to match , including dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), All dismantling/demolished material removed from MOD land completely

Material & labour for dura stone (HDVT) 15/16mm thick heavy duty outdoor tiles, matt/rustic finish of size 600x600mm in floors etc set & jointed in high performance polymer based adhesive (laticrete 315 Plus of equivalent ) to be mixed with water or latex with spacer and grout fill with MYK LATICRETE Stellar grout OR MYK LATICRETE Sanded or Unsanded Grout mixed with MYK LATICRETE 1776 Grout Admix Plus or equivalent complete all as specified and directed incl dismantling floor,hearth or wall tiling including cement motrar bedding cement mortar bedding (but not backing ) all as spfd and directed. All dismantling/demolished material removed from MOD land completely.Rate of removal outside side from MoD land deemed to be included in the same item.

M&L machine cut kota stone slab flooring 20-25 mm thick (minimum size 55 cms x 55 cms) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror polishing complete.

M&L Screed bed or bedding layer of mortar 20 mm thick in CM (1:6) for laying floor finishes.

M&L Cement concrete 40mm thick type B-1, 1:2:4(20mm graded aggregate) for floor complete all as specified and as directed.

M&L for 100mm thick PCC type D-2 (1:4:8) using 40mm graded agg as in sub base completed all as specified.

M&L for pre-cast concrete rubber moulded color finished interlocking paver Block of 60 mm thick M-35 grade any colour (as approved) and design Over sand cushioning complete including with using grey cement and pigment any shape and size confirming to IS-15658-2006 all as specified .

M&L for Sand filling under floor or in foundation including watering and consolidation all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded aggregate as in bed blocks, bed blocks of hold fasts, coping and chamfered angles and throating etc.

M&L for precast cement concrete block type B1, 1:2:4 (20mm graded aggregate) as in Kerb stone, etc and set in CM 1:4 complete all as specified.

M&L brick work in CM (1:6) with sub class ‘B’ bricks straight or curved on plane exc 6m mean readius,used in drain, boundary wall,compound wall complete all as specified and directed by engr in charge.

M&L for providing and applying corrosion resistance non-shrink free flow, cementitious one component Micro-concrete with average thickness 75mm having compressive strength (BS 4551-80-60) 50 MPA at 28 days, Tensile strength (ASTM C 348)-2.0 N/mm2 @ 28 days, Flexural strength (ASTM C 348)-9 epoxy bonding agent TM bond EP thermax having mix density of 1.45 to 1.5 kg/ltr, compressive strength (BS-6319 PT 3)-25 Mpa at 7 days bond strength (ASTM C 881)- 11 N/mm2 at 7 days, having an over lay time of 3 hrs at 30°C pouring of micro concrete into the formwork using suitable arrangement or if required using pumping device for and the bottom shuttering after 7 days ensuring proper bond between the micro concrete and existing concrete substrate etc including all tools and tackles as per accepting office, complete all as specified and directed by Engineer-in-Charge. Make : BS-66 Musi'c of Thermax/Webac Chemicals/Chemco System or as approved by Accepting Officer. Note: Shuttering & Scafolding rate deemed to included in same item. Height of building from 15 mtr to 20 mtr. No extra claim by contractor for same.

M&L for 20mm thick granite (of any type)work (table rubbed and polished ) in steps, jambs, pillars, window cills, cooking plateforms and like over 15mm thick screed bed in CM 1:6 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite etc complete all as specified.

Rounding to the edge of stone slabs on edge such as cooking platform

Dismantling boarding ,any description,any description,fixed in any position with nails etc complete all as specified & directed.

Supply and fixing 12mm thick pvc ply with suitable fully threaded steel screws etc on the backing of rack, drawer, cupboard, kitchen cabinet under kitchen counter etc all complete as per direction of Engineer-in-charge.

S& F 18/19mm thick ply both side balancing white with 1mm thick lamination, BWP marine grade ply as per IS 710 in partitions, boxes, shelves racks , almirah cupboard, and drawer etc including necesary 'L" SS buttons,nails , screws etc including 2mm thick PVC edge bending tape with hot glue by edge banding machine etc with neccesary fittings and fixture complete all as spfd and as directed.

S& F 18/19mm thick ply both side cupboad shutter balancing white with 1mm thick lamination one side decorative and other side balancing white , BWP marine grade ply as per IS 710 including necesary nails , screws etc including 2mm thick PVC edge bending tape with hot glue by edge banding machine and soft closing hinges etc with neccesary fittings and fixture complete all as spfd and as directed.

S & F Brass 4 lever locks, cupboard, grade I, size 50 mm complete all as spfd and as directed.

S&F Magnetic catcher for Wardrobe, Cub-boards Etc.

Supply and fixing stainless steel fancy Grade 304 handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge.

Dismantling of wrought iron or Mild Steel work of any description complete all as specified and directed by EIC

M & L for Rolled Steel section (Fe -410, Grade E-250)as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in chajja/roof covering/cladding to wall,fixed with self tapping screws to steel frame work, as specified.

M&L for Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming toFe-290 Gde E-165

Complete taking down/demolition carefully any type of existing roof treatment i.e. mud puska, brick coba, brick tiles, any type of tiles, PCC, plastering, leeping etc. of any type and thickness varying from 20mm to 200mm in roofs including cleaning the surface after removal (removing the rubbish from MoD Land completly) complete all as specified and as directed. Note:- Rate of removal of debris out side from MoD land deemed to be included in the same item.

Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and slurry 1:3 complete all as specified and as directed.

M&L for nominal mix of cement concrete Type B0(1:2:4) using 12.5mm graded aggregate as in roof for maint the uniform slope all as directed by Engr-in-Charge

Surface preparation and applying cement screed bed of 10 mm thick 1:4 with water proofing compound @ 3% weight of cement as per manufacture instruction with APP modified polymeric membrane centre core of 100 micron HMHDPE, weight not less than 3 Kg/Sqm and clear thickness of membrane not less than 3 mm thickness, on newly prepared surface with overlap while torching shall be 100mm on length side & 100mm on width side of memberance as per manufacturer instruction complete all as specifid and as directed with the following description. (a) Apply evenly a coat of bituminous primer conforming to IS -3384 @ 0.40 Kg/Sqm. (b) A coat of bonding bitumen confirming to IS -702 of grade 85/25 @1.20 Kg/Sqm as IInd course. (c) Laying of APP modified polymeric membrane as a IIIrd course. (d) Two coat of aluminium paint and application by brushing @.25 Kg/sqm on APP membrane as a forth course.

Supply only integral water proofing compound ISI Marked complete all as specified and directed by Engr-in-charge.

M & L for rendering 5 mm thick on ceiling on fair faces of brick or concrete surface in CM (1:3) finished even and smooth without using extra cement all as specified

M & L for preparation of new plastered surfaces of walls and applying two coat of Oil Bound distemper over a coat of 1mm thick wall care putty on wall, complete all as specified.

M&L for preparation of old surfaces including complete removal of old existing treatment of wall surfaces and applying two coat of Oil Bound distemper over a coat of 1mm thick wall care putty on wall,

M&L for preparation of new plastered surface of walls and applying two coat of exterior weather proof water base emulsion paint (APEX) of any color complete all as specified & directed. Note:- Quoted rate shall be deemed to be included for work in buildings/structure upto 15mtr height.

M&L for complete removal of old existing treatment of walls surfaces and applying a coat of white cement base wall care putty in patches as required and as directed by Engr-in-Charge finished even and smooth with sand paper and applying two coat of exterior weather proof water base emulsion paint (APEX) of any color all as specified & directed. Note:- Quoted rate shall be deemed to be included for work in buildings/structure upto 15 mtr height.

M & L preparation of newly plastered surfaces and applying three coat of white wash on ceiling incl preparation of surfaces.

M & L preparation of new surfaces of steel and iron work of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed.

M&L for preparation of old painted wooden surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint etc complete all as specified and as directed.

M & L preparation of old painted surface of steel and iron work of any description over 10 cm width or girth and applying one coat of synthetic enamel paint etc complete all as specified and as directed.

Taking down carefully copper/aluminium point wiring (light, Fan, Socket or power) fitting such as switches, ceiling roses, pendents, regulators, sockets etc complete removing material to store for keeping in safe custody and making good disturbed surfaces of walls, floors etc all as specified as directed.

Material & Labour for concealed point wiring with single core PVC insulated and unsheathed 1100 volts grade cable with multistranded copper conductor of size 1.5 Sqmm nominal area drawn through & including non metallic rigid PVC conduit (circular/flat pvc conduit), medium duty not less than 20 mm dia concealed in wall/fixed with all fittings including tees , junction boxes, modular GI gang box & provision for modular box and modular cover of suitable size for mounting modular switches , sockets & regulators & drawing through continuous earth wire of PVC insulated unsheathed 1100 volts grade cable with copper conductor solid conductor of size 1.5 sqmm complete all as specified & directed by Engineer -In-Charge. Note: 1) Cost for cutting chases and making good to match the existing surface shall be deemed to be included in the quoted rate. 2) Rates are deemed to be inclusive of Modular GI gang box & cover plates of any module & Qty as required on site.

For one light point/call bell controlled by one single pole switch & socket.

For one fan/exhaust fan point controlled by one single pole switch.

For one 3 pin sockets outlet 5 Amps on the same board with other switches with cable of size 1.5 sqmm

For 3 pin socket outlet 5Amps independent with cable 1.5 Sqmm size

For one 3 pin sockets outlet 15 Amps idependent with cables 2.5sqmm size

Supply and Fixing in replacement of modular switches 1 way, 6 Amp 1 module complete all as specified & directed by Engineer - In-Charge.

Supply and Fixing in replacement of modular switches 2 way, 6 Amp 1 module complete all as specified & directed by Engineer - In-Charge.

Supply and Fixing in replacement of modular Socket, 6A - 2/3 pin combined 2 module with shutter, complete all as specified & directed by EIC.

Supply and Fixing in replacement of modular switches 1 way, 16 Amp 1 module complete all as specified & directed by Engineer - In-Charge.

Supply and Fixing in replacement of modular Socket 6A/16A - 2/3 pin combined 2 module with shutter, complete all as specified & directed by EIC.

S&F in replacement of Single pole and neutral enclosure with a two pin and earth including plug and socket complete set with one single pole MCB of 20 Amps,complete all as specified and directed.

S&F Fan in replacement of modular fan regulator 4 step, 1 module, complete all as specified & directed by EIC.

S&F in replacement of Modular Bell push 6A 1 module, complete all as specified & directed by Engineer - In-Charge.

S&F in replacement of Ding Dong AC. 230 volts, single pole, complete all as specified & directed by Engineer - In-Charge.

Supply & Fixing in replacement of Ceiling Rose, 3 phase polycarbonate isolated body complete all as specified & directed by Engineer - In-Charge.

Supply and fix in replacement of factory made epoxy polyster powder coated VTPN distribution board 8 way with incomer MCCB of 200Amps, 4 pole, 36KA, fabricated from minimum 1.6 mm thick CRCA sheet with double door (IP-54 protection) fixed on wall and standard DIN rail, earth bar and cable ties for cable management, suitable for one incoming and 6 outgoings complete all as specified and confirming to IS: 8623 Note: (i) Cutting on wall and taking out old one and then flushing new DB and making all the connection as before and any accessories required to fix the DB including making good the disturbed surface is deemed to be included in quoted rate.

Supply and fix in replacement of factory made epoxy polyster powder coated distribution board SPN 8 way fabricated from minimum 1.6 mm thick CRCA sheet with double door (IP-43 protection) fixed flush to wall and standard DIN rail, earth bar and cable ties for cable management, suitable for one incoming and 6 outgoings complete all as specified and confirming to IS: 8623 (Make: Legrand /Siemens). Note: Cutting on wall and taking out old one and then flushing new DB and making all the connection as before and any accessories required to fix the DB including making good the disturbed surface is deemed to be included in quoted rate.

S&F in repalcement of MCB SP 6-32 Amps ,10 KA 230 Volts ,50 HZ complete all as specified and as directed by Engineer -in -charge .

S&F in repalcement of MCB SPN 40 Amps ,10 KA 230 Volts ,50 HZ complete all as specified and as directed by Engineer -in -charge .

S&F in repalcement of MCB SP 63 Amps ,10 KA 230 Volts ,50 HZ complete all as specified and as directed by Engineer -in -charge.

S&F in replacement of submain wiring with unsheathed multi-stranded FR Grade copper conductor cable 1100 volts grade drawn through in and including PVC rigid conduit medium grade of not less than 25mm dia with conduit accessories and concealed in wall/surface of ceiling for two runs of 4 Sqmm single core HR Grade and one run of 4 Sqmm PVC insulated copper conductor for earth continuity wire between main DB to Sub main DB/ Geyser/ AC plug points complete all as specified and as directed. Note :- Two run of single core cable with one run of earth continuity conductor and PVC conduit and accessories will be measured as one length including cutting chasing in wall complete. Note: Rates are deemed to be included for chases of conduit and sunking for boxes cutting and making holes in wall/floor for passing in or through conduit.

S&F in replacement of submain wiring with unsheathed multi-stranded FR Grade copper conductor cable 1100 volts grade drawn through in and including PVC rigid conduit medium grade of not less than 25mm dia with conduit accessories and concealed in wall/surface of ceiling for two runs of 10 Sqmm single core HR Grade and one run of 10 Sqmm PVC insulated copper conductor for earth continuity wire between main DB to Sub main DB/ Geyser/ AC plug points complete all as specified and as directed. Note :- Two run of single core cable with one run of earth continuity conductor and PVC conduit and accessories will be measured as one length including cutting chasing in wall complete. Note: Rates are deemed to be included for chases of conduit and sunking for boxes cutting and making holes in wall/floor for passing in or through conduit.

M&L in replacement of Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised iron strip 25×4mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated complete all as specified and directed.

S&F in replacement of LED retrofit tubelight, 4 ft long of 20 watt, complete all as directed.

S&F in replacement of LED 2 ft retrofit tubelight of 10 watt, complete all as directed.

S&F in replacement Powder coated pressure die cast aluminium compact LED building light/ street light of 45watt confirming to IP 65, complete all as specified and as directed by Engineer -in-charge. Note: Twin core copper wire of 1.5 Sqmm upto 7Rm required for connection of street light fitting is deemed to be included in quoted rates

Supply and laying in replacement of galvanised steel water tubing medium grade in trenches / wall /floor with all fittings , connections as required at site of size 20 mm bore, complete all as specified and directed.

All as per Item No 140 Above but Bore of pipe 25 mm, complete all as specified and directed.

All as per Item No 140, Above but Bore of pipe 50mm, complete all as specified and directed.

S&F in replacement of Stop valve gun metal valve with iron handle screwed both ends for iron pipe and fixed of size 20 mm bore, complete all as specified and directed.

All as per Item No 143 Above but 25mm, complete all as specified and directed.

All as per Item No 143 Above but 50mm, complete all as specified and directed.

S&F in replacement of GI union of 20 mm ISI marked complete all as specified and directed by Engr-in-charge.

All as per Item No 146 Above but 25mm, complete all as specified and directed.

All as per Item No 146 Above but 50 mm, complete all as specified and directed.

Supply and fixing in replacement of PVC float valve, high pressure (ball cock bady with epoxy coated aluminium rod & HD ball) of size 25 mm dia.including all fittings, complete all as specified and directed.

Excavation in trenches in soft / loose soil nexc 1.5 mtr wide and not exc 1.5 m in depth etc complete and getting out in soft soil inciuding trimming sides and bottom of trenches complete all as specified and directed by Engr-in- charge.

Retuning filling in trenches including watering and well ramming in layer not exc 25 cm thick in soft/ loose soil complete all as specified and directed by Engr-in- charge.

Removing excavated surplus soil to a distance not exc 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting pointall as specified.

Schedule of Credit

Neeraj Enterprises (BID ID -3505494)

M/s Vijay Enterprises (BID ID -3510039)

FUTURE ENGINEERING (BID ID -3506880)

POOJA ENTERPRISES (BID ID -3512750)