REPAIR TO AC SHEETS MANGALORE TILES ROOF TREATMENT JOINERY FLOORING SUNKEN FLOOR OF KITHEN TOILETS PLASTERING PLUMBING SANITORY FITTINGS AND SERVICE TANK CLEANING TO CERTAIN BLDGS AT SERVICE CENTRE AREA UNDER AGE B/ R(S) NO-I OF GE (S) SECUNDERABABAD

Amount

Taking down chowkats with shutter (without taking off shutters from the frame) n.exc 1.5 Sqn each.complete all as specified and as directed.

Taking down chowkats with shutter (without taking off shutters from the frame) area exc. 1.5 Sq.m but not exc. 4 Sq.m each.complete all as specified and as directed.

Taking down shutters of any description exc. 1.00 Sq.m and n.exc. 2.00 Sq.m each.complete all as specified and as directed.

S & F Solid PVC Door Frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube,supplying and fixing in opening as per manufacturers instructions and as directed by Engineer-in-Charge.

S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails .M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail ,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement and fixing in the frame as per manufacturers instructions and as directed

S & F 100mm long butt hinges extruted alluminium alloy with galvanised Mild steel hinge pin anodised and fixed type B21 complete all as specified and as directed.

S & F 150mm long aluminium anodised Tower bolts of extruted section and fixed complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide , zinc chrome primer including preparation of new steel surface of any description over 10 cm width and girth complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed.

S&F 3mm thick sheet glass ordinary quality fixing with putty in square not exceeding 0.5 Sqm in each pane. complete all as specified and as directed.

S&F in repairs for stainless steel wire cloth 0.36 mm nominal dia of wire and aerage width of aperature 1.40 mm and fixed with tinned tacks or galvanised wire staples complete all as specified.

S&F of pressed steel frames of size 125mmx60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete as specified

S&F of pressed steel frames of size 105mmx60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete as specified

S&F for Factory made 35mm thick 2nd class hard wood, plain framed, paneled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the side of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35 mm thick complete, all as specified and directed by Engr-in-Charge.

S&F second class hard wood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (w/o sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, cla-use 8.20 (a); supplied and fitted to chowkats complete all as specified and as directed.

M&L for 35 mm thick flush door shutters solid core construction with black board core with decorative face finish on one sides all as directed by Engr-in-Charge

S&F 125mm long MS butt hinges, medium weight cold rolled. complete all as specified and as directed.Make:- Crown/Swastik

S & F 200mm long aluminium anodised Tower bolts of extruted section and fixed complete all as specified and as directed.

S&F 300mm long Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy. complete all as specified and as directed.

S & F 150mm long extruded aluminium alloy handles fabricated type anodised. complete all as specified and as directed.

S & F 150mm long floor door stopper of aluminium alloy body and tongue anodised with hard steel spring fixed in floor complete all as specified and as directed.

M&L Preparatioin of new wooden surfaces of any description over 10 CM width or girth and applying two coats of synthetic enamel paint over a coat pink primer. complete all as specified and as directed.

S&F in repair 2nd class hard wood in fillets,square, rectangular in section wrought, secured with nails sectional area exc 13 Sqcm and n.exc 25 Sqcm fixed in repairs. complete all as specified and as directed.

M&L in Repairs for prelaminated particle board of 18/19mm thick interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with timber frame work of cupboards book cases etc complete all as specified and as directed.

S&F hasp & staple 100mm size aluminium anodised fixed with screws. complete all as specified and as directed.

S&F continous (Piano) hinges , mild steel, bright finished or electrogalvanised width of flaps in 30mm complete all as specified and as directed.

S&F 40mm dia cupboard knobs fixed with nuts screws and washers of brass polished of approved quality complete all as specified and as directed.

Demolition of un reinforced cement concrete in ground floors and paving n.exc 15 cm thickness (below & above ground level) complete all as specified and as directed.

M&L for 25 mm thick, PCC 1:2:4, type B0, using 12.50 mm graded aggregate as in sub base of floor complete all as specified and directed.

M&L for 75 mm thick plain cement concrete type D-2 (1:4:8) (40 mm graded stone aggregates) as in sub base complete all as specified and directed.

M&L for PCC 75mm thick type C1 1:3:6 (20mm graded aggregate) as in plinth protection laid in panels including finishing the surface even and smooth without using extra cement complete all as specified and as directed.

M & L Non skid caramic coloured tile 7 to 8 mm thick (square/ rectangular ) area of eachtile exceeding 0.11 sqm but not exceeding 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or colour cement to match laid over 15mm thick screed bed or bedding in layer of CM 1:6 for laying floor finishes complete all as specified and directed.

M & L Non skid caramic coloured tile 7 to 8 mm thick (square/ rectangular ) area of eachtile exceeding 0.11 sqm but not exceeding 0.18 sqm as in skitting etc set and jointed in neat cement slurry and pointed in white or colour cement to match laid over 10mm thick bedding in layer of CM 1:3 complete all as specified and directed.

M & L Glazed ceramic coloured tiles in vertical surface 450x300mm x 7mm thick , set and jointed in neat cement slurry and pointed in white or coloured cement to match complete in position laid on over 10mm thick screed in cm 1:3 on wall , complete all as directed and as specified by Engineer-in-charge. .

M&L for non skid coloured ceramic tiles 7 to 8 mm thick square/rectangular area of each tile exceeding 0.06 sq m but not exceeding 0.11 sq m in floors, set and jointed in neat cement slurry and pointed in colour cement to match and including laying over 15 mm thick screed bed in CM 1:6 , complete all as directed and as specified .

M & L granite work of any type 18 to 20mm thick ( of any type) work table rubbed & polished in steps , jambs , pillar, widow cills, cooking platforms and laid over 15mm thick screed bed or bedding in layer of in CM 1:4 for laying floor finishes incl pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite, complete all as directed and as specified.

Rounding to edges of stone slabs one edge such as in slopes cooking platform and other similer shine complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M & L for Vitrified ceramic tiles light shade 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding in layer of CM 1:6 for laying floor finishes complete all as specified and directed.

M & L for Vitrified ceramic tiles light shade 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, as in skirtting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick bedding in layer of CM 1:3 complete all as specified and directed.

M&L Chequered cement concrete tiles of size (30 cmx 30 cmx 25mm) thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment and including 20mm thick screed bed with cement mortar 1:6 complete all as specified & directed.

M&L for Plain cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate ) as in edging/ kerb, Coping etc complete all as specified and directed.

Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid over 15mm thick screed bed or bedding in layer of CM 1:6and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing , complete all as specified and as directed by Engineer-in-charge. .

Demolition of cement concrete of any description any thickness and in any position not otherewise specifically provided for including removal of old treatment of any description complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 using 20mm graded aggregate as in padding concrete (level course) on roof surface averaging 40mm thick etc complete all as specified and as directed.

M&L for rendering 10 mm thick in CM 1:3 mixed with integral water proofing compound as per manufacture's instructions as in roof and chajjas, finished the surface fair and even with out using extra cement.(Note : Supply of water proofing compound will be measured and paid separately .

M&L for PCC 1:2:4 type B1 using 20mm graded aggregate as in base of water tank on roof surface complete all as specified and as directed.

M&L for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3.complete all as specified and as directed.

M &L for priming plastered roof surfaces with bituminous primer @ 0.3 Kg/Sqm , APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3 mm thick reinforced with polyster non wove fabric (wt not less than 150 gms/sqm) land on primed surface by forced application complete all as specified applying heavy treatment for severe conditions using glass fibre base bitumen felt, grade 2 complete all as specified and as directed and applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm including cleaning surfaces.

Supply only integral water proofing compound.

M&L for making good of the fallen/broken portion of the RCC roof/ceiling with proper reinforcement binding & application of anti corrosive paint for avoiding rusting of old steel reinforcement complete all as specified and directed.

Demolition of brick work or stone/boulders masonry built in Cement Mortar or cement lime mortar complete all as specified and as directed.

M & L for brick work with old size bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed.

M&L for brick work brick straight or curved on plan to any radius in half brick thick wall built in CM 1:4, complete all as directed and as specified by Engineer-in-charge.

Taking down cement plaster and raking out joints, hacking for key,scrubbing down with water built in cement mortar any description complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick work in CM 1:4, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick work in CM 1:6, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 5 mm thick in CM 1:3 on ceiling,chajja,roof projection etc finished even and smooth without using extra cement.complete all as specified and as directed.

M&L for preparation of new plastered or un- plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M & L for applying two coats of OBD including priming with alkali resistant primming paint and prepatation of new surface complete all as specified and as directed.

M & L for applying two coats of colour wash over one coat of white wash on walls including preparation of new surface complete all as specified and as directed.

Disconnecting existing tanks of exc 250 but n exc 500 ltr capacity setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and re-fixing in position complete all as specified and as directed.

Disconnecting existing tanks of exc 500 but n exc 1000 ltr capacity setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and re-fixing in position with cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes etc complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tanks 500 ltrs(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I including dismantling of existing damaged water tanks.complete all as specified and as directed.

S&F in repair rotational moulded polyethylene water storage tanks 1000 ltrs(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I including dismantling of existing damaged water tanks.complete all as specified and as directed.

S&F PTMT ball valves 20 mm dia high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipes and fixed to iron pipes.complete all as specified and as directed.

S&F in repairs Gun metal globe or gate valves high pressure with polythene float and fly nut complete screwed for iron pipe or for unions of 20 mm bore complete all as specified and directed.

S & F steel tubing galvanized, medium grade with all fittings, laid in floors or fixed to walls,15mm bore.including taking down old pipe complete all as specified and as directed.

S & F steel tubing galvanized, medium grade with all fittings, laid in floors or fixed to walls, 20mm bore.including taking down old pipe complete all as specified and as directed.

Demolition and beaking up drain AC pipes/PVC pipe set in cement mortar complete all as specified and as directed.

S&F 110 mm PVC (SWR) pipes single socket in any length with rubber ring joints fixed to wall.

Dismantling timber scantlings in unframed work 40 sq. cm and over in section fixed in any position complete all as specified and as directed.

S&F Rolled sections of grade Fe 410W (Gde E-250) as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and as directed.

Dismantling AC corrugated or semi corrugated etc sheets in roof coverings complete all as specified and as directed.

M&L Pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strengh of 550 mpa as on roof covering/ridges fixed with self tapping screws complete all as specified and directed.

M&L for PCC for filling hollow of steel frames type B0 (1:3:6 )(using 12.5mm graded aggregate etc complete all as specified and directed.

S & F 2nd class hard wood plain, solid straight chowkats and frame, wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete including treating the back of chowkaths with coal tar black paint complete all as specified and as directed.

S&F mild steel flat iron hold fast of any size and similar articles confirming Fe 290 Grade E-165.

M & L for PCC (1;3:6) type C1 using 20mm graded stone aggregate as in bed blocks, copings, etc including necessary form work complete all as specified and as directed.

S & F, steel windows with side hung shutters including projecting or box type hinges with steel handle & steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

Dismantling of wall and ceiling boards ( fiber pulp insullation etc ) or insullation boards / slabs, blankets any thickness including cover fillets complete all as specified and as directed.

S & F in repairs anodised aluminium snap grid frame work for false ceiling including supporting wire all as specified of size of grid 605 x 605mm. complete all as specified and as directed.

S & F 4mm thick non-asbestos fibre cement building boards fixed or laid/inserted to aluminium / wooden frame work with screws including two coats of OBD over a coat of alkali resistant primer and preparation of new surfaces of ceiling. complete all as specified and as directed.

Demolition and breaking up drain pipes (salt glazed ware, AC or Reinforced concrete) set in cement mortar 100 mm dia complete all as specified and as directed.

Demolition and breaking up drain pipes (salt glazed ware, AC or Reinforced concrete) set in cement mortar 75 mm dia complete all as specified and as directed.

S&F in repair 75 mm dia, PVC (SWR) floor trap, plain with grating and jointing to waste pipe with solvent cement and fixed in PCC 1:2:4, type B1, complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) bends any radius with access door complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) bends any radius with access door complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) branch piece with access door, single 'Y'/'T' equal or un-equal complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls, complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls, complete all as specified and as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specified and as directed.

S&F in repair bib tap 15 mm bore, fancy type, chromium plated, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S & F in repairs 15mm bore Stop valves fancy type chromium plated screwed both ends for iron pipe for unions and fixed with long shank and cup (concealed type), complete all as specified and as directed.

S&F 300 mm long PVC connections, 15 mm dia with PTMT nuts, complete all as specified and as directed.

S&Fin repair vitreous china wash basin white flat back size 550x400 mm including cutting for and pinning in ends for bracket, fitting with piller tap 15 mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or with out letter 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and waste fittings 32 mm including waste pipe, brass chromium plated with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed

S & F in repairs, vitreous china bowl urinal, white,half stall type, with grating & union for discharge pipe, complete inc. providing & fixing plugs, bedding urinal against wall in CM 1:2, inc. 60mm long brass screws, pointing around urinal back in cement, complete all as specified and as directed.

S & F in repairs 10 ltrs capacity PVC valvless syphonic action type low level flushing cistern white colour with inlet, ball valve, float and handle complete all as specified and as directed.

S & F in repairs, vitreous china wash down water closet pan (pedestal pattern), white, 'P' or 'S' type, incl. 10 litres, PVC flushing cistern, L L, white, with inlet,ball valve, float & brackets, inc. flush pipe, PVC tube 32mm dia. & inc. plastic water closet seat, black, closed pattern with flat bottem, & cover & M S, CP or aluminium hinging device, complete all as specified and as directed.

S & F in repairs water closet (squatting pan) complete incl provison of lime concrete bedding ‘Orissa’ pattern, size 580 x 440 mm white, integral foot rests including 10 ltr capacity PVC flushing cistern and flush pipe,15mm PVC connection of size 450mm , complete all as directed and as specified by Engineer-in-charge.

M&L rendering 15mm thick in CM 1:3 on brick work or concrete surfaces, mixed with integral water proofing compound as per manufactures instructions, finished the surface even and smooth without using extra cement and applying evenly a tack coat of blown bitumen 85/25 @ 1.2 Kg/Sqm over a coat of water based bitumen emulsion primer at the rate of 0.30 Kg/Sqm including cleaning the surfaces thoroughly from dust and dirt and lay water proofing treatment with felt having glass fiber non woven reinforcement and weighing 3.0 Kgs/Sqm to 4.0 Kgs/Sqm in 100mm overlaps both longitudinally and transversely by torch bounding over a coat of blown bitumen 85/25 @ 1.2 Kgs/Sqm on top of felt as in sunken floor (bottom and vertical) complete all as specified and as directed.(Note : Supply of water proofing compound will be measured and paid separately .)

M&L for PCC 1:5:10 type D-2 (using 40 mm graded aggregate) as in filling of sunken portion etc complete all as specified and directed. .

Supply and fix in repair CP health faucet with 01 Mtr tube and hook complete all as specified and as directed .

S&F in repairs angle/stop valves cast copper alloy, screwed down high pressure fancy type chromium plated 15 mm dia with long shank and cup (concealed type) complete all as specified and directed.

harshraj and co

VACON INFRASTRUCTURES

ATUL ENTERPRISES

BEEGEE DESIGN SYSTEMS

M/S DIVIJA BUILDERS

PARDEEP AND CO

David Construction Co.

abhilasha constructions