Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹54.0 LAccepted-AOC 3RD RAYATWARI COLLIERY BINA APARTMENT PRAGATI COLONY CHANDRAPUR MAHARASHTRA 442401 UDYAM MH 08 0000457 | CHANDRAPUR | MAHARASHTRA | 442401 | L-1 | Accepted-AOC Lowest qualified bidder. Hence being awarded | |
| 2 | L-2₹63.0 L+₹9.0 L (16.7%)Rejected-AOC 5TH FLOOR FLAT NO 502 PARVATI APARTMENT TAYWADE NAGAR BESIDE D MART BELTARODI ROAD NAGPUR 440037 | NAGPUR | NAGPUR | MAHARASHTRA | 440037 | L-2 | Rejected-AOC Not a qualified L1 bidder |
Tender Value
₹60.9 L
EMD Value
₹76,100
Closing Date
23 Sept 2023, 3:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri. Nitin Naik
OFFICE OF THE AREA GENERAL MANAGER WCL BALLARPUR AREA P.O. SASTI TA. RAJURA DIST. CHANDRAPUR (MS) PIN 442905
Repairing and providing fountain system and children park equipments in 4 no. children parks located at Sasti Township under Sasti Sub Area. 2nd Call
2023_WCL_287873_1
ba3650-civ-e62-2023-24/490
Open Tender
Civil Works - Buildings
Item Rate
90 days
WCL Ballarpur Area
As per NIT
6 documents required · 6 mandatory
₹76,100
17 Nov 2023
4 Sept 2023
25 Sept 2023
4 Sept 2023
23 Sept 2023
4 Sept 2023
4 Sept 2023 - 14 Sept 2023
Amount
Earth work in excavation by mechanical means(Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m,including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources: 6 graded stone aggregate 20 mm nominal size derived from natural sources).
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, ifnishing and reinforcement- All work up to plinth level : 1:1.5:3 (1 cement: 1.5 coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources).
Centering and shuttering including strutting, propping etc. and removal of form work for : Columns, piers, abutments, pillars, posts and struts
Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.Thermo-Mechanically Treated bars.
Brick work with fly ash bricks in foundation and plinth in cement morter 1:6 ( 1 cement : 6 coarse sand)
Half brick masonry with non modular fly ash bricks of class designation 10, conformingio IS :12894, in super structure above plinth and upto floor V level. Cement mortar 1 : 4 (1 cement : 4 coarse sand)
Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. meters and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50metres lead : With cement mortar 1:4 (1 cement : 4 fine sand).
12 mm cement plaster of mix :1:6 (1 cement: 6 coarse sand)
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification.
Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS :15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4Coarse sand) including pointing the joints with white cement and matching pigment etc., complete.
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 25 mm dia nominal bore
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore
Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5m. All kinds of soil
Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required rubber moulded colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (One or more coat applied @ 0.90 ltr/10 sqm)
Writing of letter/ picture painting on board surface including back ground of boards cleaning surface etc complete as per the instructions of engg in charge
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work
Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge.
Providing and displaying Croton Golden specimen having ht. 90 cm to 1.05 cm with 5 to 6 branches, well developed, fresh and healthy foliage in 30 cm size of Earthen pot / Plastic pot
Providing and displaying of Croton Petra having ht. 45 cm & above with 2 to 3 branches, well developed, fresh and healthy leaves in 25 cm size of Earthen pot/Plastic pot. & as per direction of the officer-in-charge
Providing and fixing RCC benches of standard pattern of size 1.50 mtrs including transportation, fixing etc all complete.
Providing and fixing Double swing including transportation, fixing etc all complete.
Providing and fixing FRP Wave Slide 8 feet size including transportation, fixing etc all complete.
Providing and fixing FRP Elephant Slide including transportation, fixing etc all complete.
Providing and fixing Standing MGR for four persons including transportation, fixing etc all complete.
Providing and fixing Chair Model MGR of four persons including transportation, fixing etc all complete.
Providing and fixing Six Seater Party Swing including transportation, fixing etc all complete.
Providing and fixing Four Seater Sea-Saw including transportation, fixing etc all complete.
Providing and fixing Small Penguin Dust bin including transportation, fixing etc all complete.
Providing and fixing FRP Wheeled Dust bin including transportation, fixing etc all complete.
Providing and fixing and reestablishment of fountain with following specifications. The mechanical structure made of Class B GI pipe of standard ISI make having 65 mm dia for outer ring consider probably of 8 meter diameter(with 1” SJ nozzles probably 8 nos) and 5o mm dia pipe for inner ring consider probably of 5 meters diameter ( with 1” SJ nozzles 6 nos.) and one no center nozzle 11/2” SJ with required valve fittings and allied accessories etc. complete with all required changes in mechanical structure are taken into consideration. The Electrical system consists of a control panel made in 16 SWG sturdy MS box with powder coated finish in appropriate color including all circuit breakers, motor starter, a electronic sequencer cum controller(if required) for both power and lighting, panel meters and all allied accessories etc complete. The required cabling system (Standard ISI make) for motor as per specifications with submersible and armored ( 2,3 & 4 core) cable within 10 meters area of the system complete. The motor pump of 5 HP open well ,mono-block submersible with desired discharge and head to give desired effect of ISI mark (Make C&G/Texmo) as per the system requirement with all fittings etc. complete.
The lightning system consists of nozzle centric LED light assembly with aluminum dia casting body and SS 304 upper plate with silicon gasket and toughtened glass cover etc complete of 12W (Assembly-Authentic, LED-Edison) with water proof joints IP68 like packaging standard with all other required accessories complete.(Probably 15 numbers of RGB as each for one nozzle). There is also provision of SMPS base LED driver for DC source to LED lighting with cabling etc complete.
Providing and fixing and reestablishment of fountain with following specifications. The mechanical structure made of Class B GI pipe of standard ISI make having 65 mm dia for outer ring consider probably of 10 meter diameter(with 1” SJ nozzles probably 10 nos) and 5o mm dia pipe for inner ring consider probably of 6 meters diameter ( with 1” SJ nozzles 8 nos.) and one no center nozzle 11/2” SJ with required valve fittings and allied accessories etc. complete with all required changes in mechanical structure are taken into consideration. The Electrical system consists of a control panel made in 16 SWG sturdy MS box with powder coated finish in appropriate color including all circuit breakers, motor starter, a electronic sequencer cum controller(if required) for both power and lighting, panel meters and all allied accessories etc complete. The required cabling system (Standard ISI make) for motor as per specifications with submersible and armored ( 2,3 & 4 core) cable within 10 meters area of the system complete. The motor pump of 5 HP open well ,mono-block submersible with desired discharge and head to give desired effect of ISI mark (Make C&G/Texmo) as per the system requirement with all fittings etc. complete.
The lightning system consists of nozzle centric LED light assembly with aluminum dia casting body and SS 304 upper plate with silicon gasket and toughtened glass cover etc complete of 12W (Assembly-Authentic, LED-Edison) with water proof joints IP68 like packaging standard with all other required accessories complete.(Probably 19 numbers of RGB as each for one nozzle). There is also provision of SMPS base LED driver for DC source to LED lighting with cabling etc complete.
Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment
Supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) :
Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge
Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately)
Fine dressing of the ground
Total impact of GST for the purpose of CTC
Pravis Enterprises Pvt. Ltd.
stage.html
html • 0.04 MB
techsummary_298068.pdf
PDF • 1.03 MB
BOQ Comparative Chart
xlsx • 0.01 MB
finsummary_298068.pdf
PDF • 1.27 MB
Awarde-62.pdf
PDF • 3.86 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .