CERTAIN REPAIR AND RECARPETTING OF EXISTING DAMAGED ROADS UNDER AGE B R I AT ITARANA CANTT ALWAR

M&L for repairing to potholes any depth area n.ex 1 sqm sweeping free from dust and mud or water scoring sunken surfaces in roads, path etc cutting around edges at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal)

M&L for preparing old black top surfaces by brushing with the wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove loose dirt etc and applying evenly a priming /tack coat with cationic bitumen emulsion RS-1 grade @ 5Kg/10 Sqm complete all as specified and directed

M&L for preparing newly laid bitumen macadam top surfaces by brushing with the wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove loose dirt etc and applying evenly a priming /tack coat withcationic bitumen emulsion RS-1 grade @ 3Kg/10 Sqm complete all as specified and directed

M&L for premix bituminous macadam (Design Mix) not exceeding 75 mm consolidated thickness with binder content VG 30 @ 4% by weight of total mix , laying with mechnical paver finisher , rolled and compacted with power roller exc 8 ton but not exc 12 ton capcity to required camber and gradinet complete all as specified and directed

M&L Bituminous premix asphaltic semi dense concrete 30 mm consolidated thickness with 5.5% binder content by weight of total mix, rolled and compacted to required camber and gradient with using asphalt mechanical mixer plant & laying, spreading and rolled with 8 to 10 tonne power road roller to required level, gradient, camber and super elevation complete. The work shall be carried out by using mechanical paver, all as specified and directed by Engr - in- Charge.

M & L for cleaning and preparing the road surface and marking with reflective thermoplastic white/yellow road marking paint conforming to BIS-3262, laid through road marking machine in 2.5 mm thick layer using min 5 Kg material per square meter by incorporating the white glass beads @ 250 gms/Sqm for reflectivity for lines,dashes, arrows, zebra marking etc all as specified and as directed. Note :- I. Unit rate quoted by the contractor include for provision of red signals to keep off trafic from green work, cleaning road surface and working during odd hours when traffic is low. 2. The line marking shall stand out boldly and solidly without showing signs of scratch marks or surfaces underneath, if necessary, the surface shall be remarked after removal of existing treatment until the desired result is obtained.

S & F in repairs solar cat eyes made of aluminium dicasted body, 100% waterproof, both side reflectors, designed according to IP 65 of size 125mm x 125mm x 25mm with shank not less than 60mm length, high efficiency mono crystaline solar panel(2.5 V/0.3 watt), one Ni-Mh or NI-ed rechargable battery (1.2 V/1600 MA) having six super bright LEDs with 10000 to 18000 mcd (millicandela), view distance upto 1000 metre and flush road bearing capacity 10 MT, fixing in road by drilling a hole and with epoxy hardner etc as per manufacturer's instructions at the location complete all as directed.

S&F in repairs ABS body Twin moulded shank Cat eye of size 90 x110 x17 mm with both side red/yellow colour reflector, fixed with epoxy on road surface complete all as specified and as directed. Make: 290 series of 3M or equivalent make in list of makes approved by GE.

Surface excavation n.exc 30cm deep & averaging 15cm deep and getting out in soft / loose soil complete all as specified and directed.

Maroom/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled & rammed including watering complete all as specified and directed.

Removing excavated soil n exc. 50m & depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving exc 15cm thick (below or above ground level) complete all as specified and directed

Dismantling of cement concrete (unreinforced) kerb stone and the like of any description of and in any position not otherwise specifically provided for complete all as specified and directed

M&L for Machine pressed precast conctete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade laid over sand cushing complete all specified and directed. Note :- Sand cushioning will measured and paid seperately.

M&L for Machine pressed precast conctete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness, M-40 Grade laid over sand cushing complete all specified and directed. Note :- Sand cushioning will measured and paid seperately.

Supply and laying of sand including spreading, levelling and ramming in layers n.exc. 25 cm thick in each layer complete all as directed

M&L for 100 thick Cement concrete type D-2, 1:4:8 (40mm graded stone aggregate) as in flooring.

PCC (1:4:8) type D-2, using 40 mm graded stone aggregate in fdn mass concrete.

M&L Pre-cast (Factory casted) cement concrete Kerb stone casted in PCC (1:2:4) Type B-1 using 20mm graded stone aggregates with plan or interlocking joints (as directed) with solid blocks, exc. 10 cm in width and setting and jointed in cement mortar 1:6, complete all as specified & directed.

M&L for preparation of kerb stone, new un-treated concrete or plastered surfaces of any description over 10cm girth or width, not otherwise described and applying two coats of synthetic enamel paint in black and white colour over a coat of primer complete all as specified and directed.

M&L for Providing cement concrete type B1, 1:2:4 (20 mm graed aggregate) as in copings