Re-Construction of Pobitora Approach road for proposed visit of Commonwealth Parliamentary Team on April/2022 (EMERGENT WORK) under SOPD-G for the year 2022-23

Amount

Maintenance of Earthen Shoulder(Stripping excess soil from the shoulder) (Average depth of 75 mm) surface to achieve the approved level and compacting with plate compactor at OMC as per drawings and Technical Specification Clause 1903

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503.

Bituminous Macadam: Providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per Table 500.4 premixed with bituminous binder, transported to site upto a lead of 1000 m laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as perTechnical Specification Clause 504.

Bituminous Concrete:Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 % of mix and filler transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the reqd. grade, lavel and alignment,rolling with smooth wheeled,vibratory and tandem rollers to achieve the desired compaction as per MoSRT&H cl. no.509. complete in all respect. (including carriage of mixed materials up to 10.0 Km initial lead from mixing plant )( Including cost of testing of materials at site and laboratory as directed by the deptt.) A.(ii) For Grading II

Interlocking pavement block: Providing and laying interlocking concrete block pavement with M40 grade grade of concrete blocks having thickness 80mm as per technical specification clause 1504 complete including carriage.a) Including Edge block/ Edge restraints

Edge Marking: Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes and conforming to the Mort&H specifications.

Providing reflective pavement marker with Micro prismatic lens in both direction having thermoplastic body adhering to the specification and guidelines of MoSRT&H’s fixed to the road surface using the adhesives and the procedures recommended by the manufacturers with three months replacement warranty and free maintenance.

Providing Spakle Solar Road Studs, manufactured by TATA B.P. Solar India Ltd. Of size (125mm x 125mm), 90 mm height (from bottom of shank to the top of stud) with detachable battery , m6LEDs on one side for unidirectional studs, ultra bright LED in amber and red colour, weight per stud 700-25 gms, flash rate of 50-65 times per minute completely water resistant and weather proof with replacement warranty and free maintenance for one year from the date of installation of stud on road (installation should be made using adhesives and procedures recommended by manufacturer under the supervision of the competent technician).

M/S Raj Kumar Jain

Progressive Construction