NIT NO. 04 (M-3)ITEM NO.26

Supply of sluice valve, non-rising with SS spindle flanged ends of size 200 mm PN 1.0 Make: Kirloskar/ IVC/ Marck/ Jupiter/ VAG/ Dorot

Supply of C.I. NRV without bye pass swing type flanged ends of size 200 mm PN 1.0 MAKE: Kirloskar/ IVC/ Marck/ Jupiter/ VAG/ Dorot

CI foot valve as per IS 4038 flanged 200mm Make : Kirloskar/ IVC/ Marck/ Jupiter/ VAG/ Dorot

Supply of rubber 75% neoprene packing sheet as per required size. Make: - Jyoti/ Worth

Supply of good quality nut, bolts with washer of different size.

S/o Supply of MS pipe made out of 8 mm Thick MS plate i/c welding, cutting, painting both Approved side with black anticorrosive bituminous paint of approved brand and tested to a head of Rate 15 kg/sqm conforming to IS 3589/1981, IS 7322-1974, IS 784-1978 and relevant codes i/c cost of plate and carriage at site complete as directed by Engineer-in-Charge. (actual weight will be paid) A/R . Size 200mm

S/o Supply of MS special-made out of 10 mm thick- MS plate painting both sides with black anticorrosive bituminous paint of approved brand and tested to a head of 15 kg/sqm conforming to IS 3589/1981, IS 7322-1974, IS 784-1978 and relevant codes i/c cost of plate and carriage at site complete as directed by Engineer-in-Charge.(actualweightwill be paid)

Disconnection of Electric connections of motor from panel to starter and motor after dismantling of associated cables with the help of manual labour, tools and tackles as required at site taking all safety measures.

Decoupling the pump and motor after removing the tyre coupling by opening of the nuts, bolts etc. The job includes dismantling of suction and delivery side sluice valve, NRV, taper, bends, foot valves,pipes etc. as per site requirement and then taking them to a suitable place .

Dismantling the pump set from the MS Base frame by cutting of nut & bolts with the help of gas cutter, tools and breaking of RCC foundation by hydraulic hammer and manual labor to take out existing foundation bolts and taking out malva with the help of manual labour.

Re-casting/ strengthening of RCC foundation, re-grouting of foundation bolt with the help of PMC, plastering and making wet layer of cement of the foundation including supply of foundation bolt & Shuttering etc. as required.

Restoration of MS base frame of pump set by replacement of its worn-out parts/ MS flats so as to strengthen the MS structure by providing and fixing of MS plate on base frame with the help of skilled labour using welding, cutting, grinding etc. as per sample.

Fixing of MS base frame on the RCC foundation by plastering/ filling the gap of RCC foundation and MS foundation after fixing of base frame with the help of SS nuts as required.

Installation of motor Pump-set along with sluice valve and NRV including piping work & making, providing of specials like Bends, Tee, reducer, flanges & etc. as required & and executing all allied E&M and civil work, laying of cable as per site requirement, making alignment of pump-motor & making connections of motor with starter and panel with thimbling by taking all safety precautions, arranging all tools and tackles including welding set, gas cutter etc. as per site requirement

Testing and commissioning of pump sets first at NO LOAD and then at FULL LOAD and for proper operation and testing for any leakage to the satisfaction of engineer in charge.

Transportation charges for to and fro of men and material including and unloading etc. at a suitable place, painting of above E&M equipment.

Prime India Associates

paramount systems

Raj Engineering Co.