Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.0 LAccepted-AOC C O GENERAL DAIRY VILLAGE BARAGAON SRI GANGANAGAR 335 001 | GANGANAGAR | RAJASTHAN | 335001 | L1 | Accepted-AOC Lowest tenderer | |
| 2 | L2₹38.4 L+₹5.4 L (16.4%)Rejected-Finance | L2 | Rejected-Finance L2 bidder | |
| 3 | L3₹39.7 L+₹6.8 L (20.5%)Rejected-Finance HOUSE NO 8 589 BEHIND PHC HOSPITAL OLD BUS STAND KORBA KORBA CHHATTISGARH 495678 | 495678 | L3 | Rejected-Finance L3 bidder |
Tender Value
Refer Docs
EMD Value
₹69,780
Closing Date
31 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE SRI GANGANAGAR
HQ CWE POST BOX 48 SRI GANGANAGAR-335001 (Rajasthan)
CA No CWE SGNR TOKEN-57 OF 2022-23PROVN OF SINGLE JCOS ACCN (03) WITH BATHROOM AND TOILET AT OTM - III AT MIL STN LALGARH JATTAN (ND CALL)
2023_MES_606522_2
CA NO CWE SGNR T-57 OF 2022-23
Open Tender
Civil Works
Item Rate
180 days
GE LALGARH JATTAN
AS PER TENDER DOCUMENTS
10 documents required · 10 mandatory
₹500
GE LALGARH JATTAN
₹69,780
Yes
6 Nov 2023
10 Aug 2023
2 Sept 2023
10 Aug 2023
31 Aug 2023
17 Aug 2023
Amount
Excavation in trenches n.exc. 1.5m wide and n.exc 1.50 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc. 10 Sqm on plan and n.exc 1.5 m in depth and getting out in getting out in soft / loose soil complete all as specified and as directed by Engineer-in-Charge.
All as per item No 01 above here-in-before but description not exc 1.5mtr amd not exc 3 meter complete all as specified and as directed by Engineer-in-Charge.
M&L for PCC (1:4:8) type D2 using 40mm graded stone aggregate in as foundation, filling & mass concrete omplete all as specified and as directed by Engineer-in-Charge.
M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finish surface of concrete flat complete all as specified and as directed by Engineer-in-Charge.
M&L for formwork to sides of pillars, columns etc; rough finish surface of concrete square, rectangular or polygonal complete all as specified and as directed by Engineer-in-Charge.
M&L for formwork to sides and soffits of floor or roof beams, beam hunchings, girders, bressummers, lintels, cantilevers, etc. also splays between floors and beams, etc. rough finish surface of concrete flat complete all as specified and as directed by Engineer-in-Charge.
M&L for formwork to chajjas, troughts and similar items including edges rough finish surface of concrete flat complete all as specified and as directed by Engineer-in-Charge.
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exc 200 mm thick (horizontal or sloping) rough finish surface of concrete flat complete all as specified and as directed by Engineer-in-Charge.
M&L for fromwork to edges of concrete flats, treads breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n.exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n.exc 20 cm wide, rough finished surfaces of concrete complete all as specified and as directed by Engineer-in-Charge.
M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engineer-in-Charge.
All as per item No 10 above here-in-before but 5mm dia and over upto and including 10mm dia as in stirrups, spaces & binders complete all as specified and as directed by Engineer-in-Charge.
M&L for reinforced cement concrete (design mix) M-25 using 20mm graded stone aggregrate in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, pillers etc complete all as specified and as directed by Engineer-in-Charge. Note : Reinforcement shall be measured and paid seperately under respective item of BoQ.
M&L for reinforced cement concrete (design mix) M-25 using 20mm graded stone aggregrate in columns, pillers complete all as specified and as directed by Engineer-in-Charge. Note : Reinforcement shall be measured and paid seperately undr respective item of BoQ..
M&L for reinforced cement concrete (design mix) M-25 using 20mm graded stone aggregrate in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed by Engineer-in-Charge. Note : Reinforcement shall be measured and paid seperately undr respective item of BoQ.
M&L for reinforced cement concrete (design mix) M-25 using 20mm graded stone aggregrate in Chajjas; complete all as specified and as directed by Engineer-in-Charge.. Note : Reinforcement shall be measured and paid seperately under respectively item of BoQ.
M&L for reinforced cement concrete (design mix) M-25 using 20mm graded stone aggregrate in slabs supported on walls, beams and columns in floors, roofs, Stair case, landings, balconies, canopies, deck slabs and in shelves and the like; complete all as specified and as directed by Engineer-in-Charge.. Note : Reinforcement shall be measured and paid seperately under respective item of BoQ.
M&L for brick work with fly ash bricks, of old size bricks, straight or curved exc. 6 m mean radius built in CM (1:6) complete all as specified and as directed by Engineer-in-Charge.
M&L brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, buit in CM (1:4) complete all as specified and as directed by Engineer-in-Charge.
Returning, filling in, including spreading levelling including watering & well ramming in layers n. exc 25 cm all in soil complete all as specified and as directed by Engineer-in-Charge.
Spreading and levelling in layers n.exc 25cm thick and well ramming including watering as required under floors; all as directed. (in floor with available earth from excavation approved by Engr-in-Charge.
Removing excavated materials n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and as directed by Engineer-in-Charge.
M&L for treating the top surface of filled earth @ 5 litres emulsion per square metre of surface complete all as specified and as directed by Engineer-in-Charge.
M&L for treating the soil under plinth protection @5 litres of emulsion per square metre of surface area complete all as specified and as directed by Engineer-in-Charge.
M&L for hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc.15cm thick,watered and rammed to a true surface in broken stone or boulders (15cm compacted thickness) complete all as specified and as directed by Engineer-in-Charge.
M&L for 75 mm thick PCC (1:3:6) type C-1 using 20 mm graded crushed stone aggregate as in plinth protection finished even and smooth without using extra cement with & including 10 mm wide, 30 mm deep joints at the rate of 3.00 mtr centre to centre and at every turning & filling the joints with bitumen & sand mixture complete all as specified and as directed by Engineer-in-Charge.
M&L for 75mm thick PCC (1:4:8) type D2 using 40mm graded stone aggregate as in sub base below floors complete all as specified and as directed by Engineer-in-Charge.
M&L for 25 mm thick PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate as in floor or laid under floor etc complete all as specified and as directed by Engineer-in-Charge.
M&L for joint free Non-skid Ceramic coloured tiles 7 to 8 mm thick, area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. over and including 15 mm thick screed bedding in cement mortar (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor complete all as specified and as directed by Engineer-in-Charge.
M&L for joint free glazed Ceramic coloured tiles of size 450 x 350 x 7 mm thick on vertical surfaces such as skirting / dados over and including 10 mm thick backing coat in cement mortar (1:4) set and jointed in neat cement slurry and pointed in coloured cement to match the floor complete all as specified and as directed by Engineer-in-Charge.
M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectengular) area of each tile exc 0.18 Sqm but not exc 0.38 Sqm in floor over and including 15 mm thick screed bedding in cement mortar (1:6), set and jointed in neat cement slurry and pointed in coloured cement to match the floor complete all as specified and as directed by Engineer-in-Charge.
M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectengular) area of each tile exc 0.18 Sqm but not exc 0.38 Sqm in floor over and including 10 mm thick rendering on vertical surface in cement mortar (1:4), set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and as directed by Engineer-in-Charge.
M&L for machine cut Kota stone slab flooring 20-25mm thick (size 550 x 550 mm) over and including 15mm thick screed bed in CM (1:6) laid and and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed by Engineer-in-Charge.
M & L Machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 10 mm thick rendering in cement mortar (1:4), complete all as specified and as directed by Engineer-in-Charge.
M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding to edges of stone slabs (one edge) complete all as specified and as directed by Engineer-in-Charge.
M & L for 18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed by Engineer-in-Charge.
S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flaps of 30 mm fix with wooden/ plywood and complete all as specified and as directed by Engineer-in-Charge.
S & F for Steel rolling shutters of thickness 1 mm , with ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified and as directed by Engineer-in-Charge..
S & F for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed by Engineer-in-Charge.
M&L for rendering, 10 mm thick on brick work or concrete surfaces in cement mortar (1:6) on wall finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge..
M&L for 5 mm thick rendering in cement mortar (1:4) (as second coat), over and including 10 mm thick rendering in cement mortar (1:6) (as first coat) of fair faces of brick work or concrete surfaces of wall, incl mixing only liquid water proofing compound in second layer only as per manufactures instruction, finished the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. Note :- WPC Shall be measured and paid separately as supply only.
M&L for rendering, 5 mm thick on brick work or concrete surfaces in cement mortar (1:3) on ceiling finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge..
Supply only liquid water proofing compound all as specuified and directed by Engr-in-Charge.
M&L for preparation and applying three coats of white wash on newly plastered surfaces of wall complete all as specified and as directed by Engineer-in-Charge..
M&L for preparation and applying three coats of white wash on newly plastered surfaces of ceiling complete all as sepecified and directed by Engineer-in-Charge..
M&L for two coats of acrylic distemper on new plastered surfaces of walls paint over 3mm thick wall care putty over a coat of primer including preparation of surfaces complete all as specified and as directed by Engineer-in-Charge..
M&L for preparation and applying two coats of cement base paint on newly plastered surfaces of wall complete all as specified and as directed by Engineer-in-Charge..
M&L for Roof treatment to RCC roof as follows:- (a) Cleaning the roof surfaces thoroughly using wire brusehes to remove sharp projections, cleaning joints, washing, drying and removing all dirt/dust to receive concrete padding/plaster etc. (b) Providing 15 mm thick screed bed or bedding layer of cement mortar (1:4) with WPC, finished even and smooth without using extra cement. (c) Providing one coat of approved bituminous primer @100 gms per sqm, over dried plastered surface. (d) Laying 3 mm thick APP membrane,(mineral finish) reinforced with non woven polyster fabric, by torch application. The overlapping while torching shall be 75 mm on longitudinal direction and 100 mm on the transverse direction complete complete all as specified and as directed by Engineer-in-Charge. Make : STP Dr Fixit/Pidilite, Texsa India Ltd/Tikitar Dansona/Bengal Bitumen Notes : (i) All joints and change in directions should be covered wih cement mortar (1:3) mixed with SBR latex @ 200 ml/bag of cement/as per site reqmt and cured well before laying membrane by torching. (ii) All angles and abuttments should be sealed well with extra care to ensure full bondage. (iii) Water proofing treatment shall be got carried out by approved authorised applicator of manufacturer only. The name of firm shall be got approved from GE before carrying out the wk. (iv) The independent testing of membrane for technical parameters given in particular specifications shall be carried out from Govt approved labs having fascilities for testing of membrane. (v) The guarnatee of treatment shall be for min 10 yrs reckoned from date of completion of whole wk.
M & L for cement concrete tiles 25cm x 25cm x 22mm thick, machine pressed and over and including 20 mm thick screed bed in cement mortar (1:6) set and jointed with grey cement slurry mixed with pigment and no pigment in floors/roof, and cut and polished complete all as specified and as directed by Engineer-in-Charge.
S&F for factory made window, made out of MS hollow section of size 79mm x 39mm x 1.6mm thick frame with double shutter (glazed and wire guage shutter) made out of Z section using flush butt welding and tenon riveting all as per IS 1038/83, dobby hinges shall be provided to both shutter, locking arrangement as per sample approved by GE, provided with knob 'Z' section handles 100mm size and 150 mm long hook and eye welded to frame and shutter,four number legs welded to frame including necessary flat iron beading for securing wire gauge etc including holes, cutting holes for hold fast and making good disturbed surfaces in PCC (1:2:4) type B1 to match with the existing surfaces complete all as specified & directed by Engineer-in-Charge.
S&F for factory made steel ventilators all as per IS 1038/83, with top hung shutters including hinges, steel peg stay, complete all as specified & directed by Engineer-in- charge.
M&L for framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spiles; framed guard bars; barred iron doors; ladders; framed balusteres; walk ways, railings; framework of water tanks and similar work confirming to Fe. 290, Gde-E-165 with complete all as specified and as directed by Engineer-in-Charge..
M&L for framed work as in chowkats of doors windows of angle iron ,gates or other section with gusset plates, rails, braces etc conforming to Gde Fe. 290, Gde-E-165 complete complete all as specified and as directed by Engineer-in-Charge.
S&F for 35 mm thick 2nd class hard wood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed by Engineer-in-Charge..
S&F for 35 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and as directed by Engineer-in-Charge..
Supply and fixing of Fibre glass Reinforced plastic (FRP) door frame of required built in colour in three legged of cross-section 90mm x 45mm having single ribate of 32mm x 15mm to recieve shutter of 30mm thick including laminated door frame moulded with fire retardant grade unsaturated polyster resin and chopped strand mat(CSM) also door frame laminated shall be 2mm thick and shall be filled with suitable wooden block of 2nd class hard wood in all three legs frame shall be covered with fibreglass from all sides MS stay flat iron 25mm x 3mm shall be provided at the bottom to steady the frame complete all as specified and as directed by Engineer-in- charge.
Supply and fixing of 30 mm thick glass fibre reinforced plastic (FRP) paneled door shutter conferming to IS:14856-2000 of required colour and made with fire retardant grade unsaturated polyster resin,moulded to 3mm thick FRP laminated for forming hollow rails and style with suitable second class hardwood timber block inside at required places for fixing of fittings,cast molithically with 5mm thick FRP laminated for panels including fixing to frames,complete all as specified and as directed by Engineer-in- charge.
S&F for 100 mm long butt hinge, extruded aluminium alloy with galvanised mild steel hinge pin, anosied and fixed type B-21 complete all as specified and as directed by Engineer-in-Charge..
Supply & fixing 100mm long butt hinges mild steel medium weight cold rolled including necessary welding etc. to steel frame complete all as specified and as directed by Engineer-in-Charge..
S&F for 300 mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and as directed by Engineer-in-Charge..
S&F for 200 mm long aluminium anodised barrel tower bolt, of extruded sections complete all as specified and as directed by Engineer-in-Charge..
S&F for 150 mm long extruded aluminium alloy handle, fabricated type anodised complete all as specified and as directed by Engineer-in-Charge..
S&F for 300mm ordinary rat tail rod pattern springs including roller and roller plate complete mild steel fixed complete complete all as specified and as directed by Engineer-in-Charge..
S&F for 2nd class hard wood (Sal) or any other 2nd class hard wood articles not exceeding 200 cubic centimetre each as small fittings such as shaped door and window stops and the like, including necessary labour etc complete all as specified and as directed by Engineer-in-Charge..
S&F for stainless steel wire cloth 0.36 nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed by Engineer-in-Charge.
S&F for 4 mm thick sheet glass ordinary quality and glazing with spring clips in metal surrounds and oil putty in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed by Engineer-in-Charge.
S&F for 4 mm thick figured glass, pin head type and glazing with spring clips in metal surrounds and oil putty in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed by Engineer-in-Charge.
M&L for preparation of new steel surface of any description not otherwise described over 10 cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer-in-Charge.
M&L for preparation of new wooden surface of any description not otherwise described over 10 cm width or girth and apply two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed by Engineer-in-Charge.
S&F drapery rods stainless steel Finish, standrad quality, 25mm dia with heads at both ends, rings, etc complete all as specified and as directed by Engineer-in-Charge.
S&F vitrieous china wash down WC (Pedestal pattern) white and flush piple including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc, complete all as specified and as directed by Engineer-in-Charge.
S&F plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, Jet spray , seat and cover for water closet (European type) complete all as specified and as directed by Engineer-in-Charge.
S&F vitreous china wash hand basin coloured Flat back of size 550x400mm, long screwed shank fly nut flange end including cutting for and pinning in ends of brackets in (1:3) CM including 32mm dia chromium plated waste coupling/trap complete all as specified and as directed by Engineer-in-Charge.
S&F 10 litres capacity PVC valve less syphonic action type low level flushing cistern white with inlet incl flush pipe of low or high density of PVC 32mm dia, 90cm long and 15mm stop cock making connection incl ball valve, float, handle including brackets and 32mm dia PVC flush pipe complete all as specified and as directed by Engineer-in-Charge. by Engr-in-Charge.
S&F health faucet with CP flexible cord fixed on wall complete complete all as specified and as directed by Engineer-in-Charge.
S&F 15 mm dia stop valve, fany type chromium plated with long shank and cup (concealed type), cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe complete all as specified and as directed by Engineer-in-Charge..
S&F 15 mm dia stop valve/angle valve, fancy type chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe complete all as specified and as directed by Engineer-in-Charge..
Supply and fix pillar taps of swan neck type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed in 15mm dia bore pipe complete all as specified and as directed by Engineer-in-Charge..
Supply and fix bib taps, cast copper alloy fancy type chormium plated. with crutch or butterfly handle screwed down screwed for iron pipe of brass ferrule, and fixed in 15 mm bore dia of pipe complete all as specified and as directed by Engineer-in-Charge.
S&F chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed by Engineer-in-Charge..
S&F PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and as directed by Engineer-in-Charge..
S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed by Engineer-in-Charge..
S&F brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed by Engineer-in-Charge..
S&F brass hat pegs, solid body, 125 mm to 175 mm (5 legs) complete all as specified and as directed by Engineer-in-Charge..
S&F 25 mm dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed including of all fitting complete all as specified & directed by Engr-in-Charge.
S&F rotational moulded polythene water storage tank 500 ltr capacity of tripple layer vertical with closed top (ISI Marked) hoisted and fixed in position all as specified in SSR part-I. complete all as specified and as directed by Engineer-in-Charge..
S&F ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed in 20mm dia bore pipe complete all as specified and as directed by Engineer-in-Charge..
S&F gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of 20mm bore fixed in repair complete all as specified and as directed by Engineer-in-Charge..
S&F 15 mm bore Galvanised iron tube medium grade with all fitting fixed concealed complete to walls and ceiling or laid in floors, ccomplete all as specified and as directed by Engineer-in-Charge..
S&F 20 mm bore Galvanised iron tube medium grade with all fitting fixed concealed complete to walls and ceiling or laid in floors, complete all as specified and as directed by Engineer-in-Charge..
S&F 25 mm bore Galvanised iron tube medium grade with all fitting fixed concealed complete to walls and ceiling or laid in floors complete all as specified and as directed by Engineer-in-Charge.
Supply & fixing 100 mm bore cast iron spun cast pipe Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified & directed by Engr-in-charge.
Supply & fixing 75 mm bore cast iron spun cast pipe Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified & directed by Engr-in-charge.
S&F 100mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed by Engineer-in-Charge.
S&F 75 mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed by Engineer-in-Charge.
S&F CI vent cowl of dia 100 mm complete all as specified and as directed by Engineer-in-Charge..
S&F 75 mm bore cast iron bends with oval access doors (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed by Engineer-in-Charge.
S&F 100mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches door fixed with necessary coupling complete complete all as specified and as directed by Engineer-in-Charge.
S&F dia of outlet 75mm, cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed by Engineer-in-Charge.
Surface dressing not exceeding 15cm deep in soft/loose soil complete all as specified and as directed by Engineer-in-Charge.
Surface excavation n.exc. 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed by Engineer-in-Charge..
M&L for precast cement concrete (1:2:4) type B1 using 20mm graded stone aggregate as in kerb stones size 300mm x 300mm x 100mm with plain fair faces, including chamfers, weathering, throating etc setting in CM (1:4) complete all as specified and as directed by Engineer-in-Charge.
M&L for 100mm thick PCC (1:4:8) type D2 using 40mm graded stone aggregate as in sub base below floors complete all as specified and as directed by Engineer-in-Charge..
M&L 60mm thick, M-40 grade machine pressed precast concrete interlocking paver block glossy with grey cement and pigment, any shape and size confirming to IS 15658-2006 of with over and including 50mm thick sand cushion complete all as specified and as directed by Engineer-in-Charge..
M&L for PCC (1:3:6) type C1 using 20mm graded stone aggregate as in coping including necessary formwork, weatherig, slightly rounded or chamfered angle and throating complete all as specified and as directed by Engineer-in-Charge..
M&L for PCC (1:2:4) type B2 using 40mm graded stone aggregates as in benching / haunchig of manholes including forming channels including necessary formwork etc complete all as specified and as directed by Engineer-in-Charge..
M&L precast cement concrete (1:2:4) type B1 using 20mm graded stone aggregate and set cement mortar (1:6) as in cover slabs (for manholes etc,) chajjas, shelves and similar articles with plain faces complete all as specified and as directed by Engineer-in-Charge.
M&L for rendering 10mm thick on fair face of brick work in cement mortar (1:4) and finished surfaces even and smooth without using extra cement as specified including WPC complete all as specified and as directed by Engineer-in-Charge.. Note :- (WPC shall be measured and paid seperately)
Material and labour for moorum bed to drain pipes, spread, levelled and rammed including watering complete complete all as specified and as directed by Engineer-in-Charge. by Engineer-in-Charge.
Supply and laying DPCPE (SN8) 180 (OD)/163 (ID) mm diameter drain pipes as per IS-16098 (Part-II), laid in trenches on moorum bed to required slope, including all accessories/fittings, jointing and tested complete all as specified and as directed by Engineer-in-Charge
Cutting into existing manholes for connection of new drain making pipes and rendering cutting out existing benching & forming branch channel in PCC (1:2:4) type B1 smooth finished & forming benches as reqd etc for 150 mm bore complete all as specified and as directed by Engineer-in-Charge..
Supply , laying and testing, jointing of cable XLPE cable screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade of size 70 Sqmm 4 core with stranded aluminium conductor complete complete all as specified and as directed by Engineer-in-Charge.
M & L for sand cushioning with dry and clean locally available sand for underground cable 8cm before laying cable and 15 cm after laying cable and punned to 18 cm after laying of cable complete complete all as specified and as directed by Engineer-in-Charge. Note:- punned thickness shall be considered for payment purpose
supply and laying one layer of bricks/ cable protection cover of any size (Old brick ) for cable protection, laid flat and dry in trenches over the cable , perpendicular to the direction of cable complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 20mm bore GI pipe medium grade with all fittings laid in trenches complete all as specified and as directed by Engineer-in-Charge.
Cutting in existing pipe line for connection 50/40mm bore ferrule complete all as specified and as directed by Engineer-in-Charge. Note: Necessary fitting required is including in unit rate of this item.
M&L for concealed Point wiring with two single core PVC insulate, unsheathed multistranded copper conductor cable of size 1.5 sq.mm (FRLS) drawn in and including electrical grade PVC conduit 20 mm dia concealed on wall/ceiling/floor including PVC insulated unsheathed earth wire with multi stranded copper conductor of size 1.5 sq.mm(FRLS) including galvanised modular shunk box with modular plate cover with locking sheet of required module for mounting switches, sockets etc complete all as specified. Note :- quoted rate shall include making good to the disturbed surfaces including plastering and painting to match with the existing colour complete all as specified and as directed by Engineer-in-Charge.
One Light point controlled by one, one way switch.
One ceiling/exhaust fan point controlled by one switch and regulator
One 3 pin switch socket outlet, 5 Amp on the same board with other switches.
One 3 pin 5 amps switch socket outlet point on independent board.
One bell/buzzer point controlled by one bell push.
One light point controlled by two way switch.
All as per item Sl. No.117 here in before but wiring with 4 sq.mm multistranded cable and earth wire with copper conductor of size 4 sq.mm for 15 amps power point complete all as specified and as directed by Engineer-in-Charge.
Supply and fix switch, piano type, 230/250 volts grade on top covers
Modular switch,,one way 6 Amp, 1 module
Modular switch,,two way 6 Amp, 1 module
Modular switch,,one way 16 Amp, 1 module
Modular bell push 6 Amp, 1 module
Supply and fix socket out let multipurpose use, flush mounting type, 240 Volts grade on Top covers
Modular socket outlet 6 Amp, 2/3 pin combined 2 module
Socket 16 Amp, 2/3 pin combined 2 module
S & F LED light fitting 1 x 20 W, 230 Volts integral sleek polycarbonate LED Channel with white acrylic cover incl making connection complete all as specified and as directed by Engineer-in-Charge..
Supply and fixing ceiling rose surface bakelite two to three terminals/plate 5 Amps complete all as specified and as directed by Engineer-in-Charge.
Supply and fix distribution board double door made out of CRCA mild steel sheet surface with insulated material like polyester or with powder coated surface mounting SPN 8 way 240 Volts with busbar rating rating 200 Amps dust and vermin proof suitable for incorporation of MCB's and isolators etc complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing MCB DB distribution box 3 phase TPN 4 ways double door including MCCB 125 Amp 3 pole, 16 KA as incommer with bus bar rating 200 Amps vertical type dust and vermin proof complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and neutral and current carrying capacity 40 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and and current carrying capacity 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and as directed by Engineer-in-Charge.
Supply and Fix Bell AC 230 volts single pole.
Material & Labour for Sub Main Wiring with two run single core 10 Sqmm PVC insulated unsheathed (FRLS) cable with stranded copper conductor drawn in PVC conduit & accessories suitable size with and including 10 Sqmm copper green colour earth wire complete all as specified and as directed by Engineer-in-Charge. NOTE: Two run of 10 sq.mm & One run of 10 sq.mm & One run of PVC conduit with accessories shall be measured as One length.
Earthing complete with galvanised steel earth plate electrode 600mmx600mmx6 mm buried directly in ground vertically to a depth not less than 2.25 mtr below normal ground level connected to 4 mm dia GI wire by means of bolts, nuts, check nuts and washers complete including earthing pit, chemical compound, Earthing lead 4mm dia upto 7.5m, 20mm dia medium grade GI watering pipe, GI protection pipe 15mm dia light grade, earth pit in PCC (1:2:4) type B-1 using 20mm graded stone aggregate, RCC pit cover including earth work complete all as shown electrical plate No-3 of SSR-2009 (Part-I) complete all as specified and directed by Engr-in-Charge. Note:- The unit rate shall include for excavation & earth work in any type of soil/strata, PCC (1:2:4) type B-I for pit & RCC (1:2:4) type B-I for pit cover with 8mm dia CTD bar @150mm C/C both way, funnel with watering pipe 20mm dia medium drade, 15mm dia light grade GI pipe upto 7.5 mtr long
Supply and fixing LED bldg security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete incl bldg security light bracket made out of 25 mm dia GI medium grade pipe 0.6 mtr long complete with 2 sets of FI clamps made out of 30x5 MS flat & nuts, bolts & washer including painting to clamp with two coats of aluminium silver paint over a coat of primer after complete all as specified and as directed by Engineer-in-Charge..
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by Engineer-in-Charge.
Supply and fix Lamp holder, PVC /pilycarbonate type with cord grip cap suitable for batten fitting complete all as specified and as directed by Engineer-in-Charge... Note : CFL bulb will provided by MES for free for fixing.
Supply and fix exhaust fan made of study Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep in air delivery 210 CFM . Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed by Engineer-in-Charge.
Supply and fix electric water heater, storage type ABS body with stainless steel inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated with 3 LEVEL SAFETY: Capillary Thermostat, automatic thermal cut-out & multi-functional valve to provide higher safety and ANTI-RUST: Fitted with specially designed magnesium anode which prevents corrosion due to hard water quality complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and as directed by Engineer-in-Charge.
LM CONSTRUCTIONS
M/S BHAGWATI CONSTRUCTION COMPANY
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .