Carrying Out Civil Engineering Jobs, Cleaning of UG and OH water tanks and supply of Pick Up Van, Utility Van for Sea Side Buildings for year 2023-24, North Site, BARC, Trombay, Mumbai.

Amount

Cleaning of overhead water tanks at all levels, by water jet operated mannualy, removal of slurry, mopping of tank internal surface, rubbing with wire brush, dis-infection by anti-bacterial agent etc. complete including painting / writing date of cleaning on the tank wall surface, cost of all material scaffolding and labour etc. complete as directed by the Engineer. ( Drinking water tank shall be cleaned Twice in a year after Six months of interval. Measurement shall be taken & paid on each time of cleaning.)

Labour charges only for thoroughly cleaning the under ground water storage tank. Note : By using approved cleaning agents, Coir brushes, including bailing out of stagnated muddy water of about 250 MM deep, slush etc. with all the cost of cleaning agent, brushes bucket and all other accesesaries etc. complete and disposing the removed earth within a distance of 50 M. Note (For item no.1 & 2) : (1) The contractor should inspect all the over head and underground water tanks to be cleaned and asses the activity and quantum of work required for maintaining the water tank in the clean condition for specified contract period and quote the rate accordingly. (2) Measurements shall be taken on volumetric basis as per the internal dimentions of the tank. (Drinking water tank shall be cleaned Twice in a year after Six months of interval. Measurement shall be taken & paid on each time of cleaning.)

Providing & supplying of Pick-up Van / Utility Van for various areas for the requirements arising from time to time inside and outside BARC. The Pick-up Van / Utility Van of five seaters capacity with the back side provision for transporting/ shifting of various construction / maintenance materials, machinaries and tools etc. and for other works including Driver as assigned and directed by Engineer-in-Charge. (8Hrs. a day or 80 km max as per certification of Engineer-in-Charge). Conditions: 1. The above rates shall be inclusive of cost of supply of Pick-up Van / Utility Van, Fuel, wages of Drivers and other consumables etc. 2. The Reporting time at the place of duty / as instructed by EIC shall be considered for the billing / measurement / payment. 3. In case the pick up van is parked inside the BARC premises then the reporting time of the driver to EIC shall be considered for the billing/ measurement/ payment. 4. Break Down Hours as per actuals and Lunch break (30 min.) timings shall not be considered for payment. 5. Fraction of hours shall be rounded off to nearest half an hour at the time of preparing the Running / final bills 6. BARC being a strategic Organisation, the driver should have good credentials and shall have valid PVC, driving license and address proof. They should be in a position to understand Hindi / English / local language. 7. The make and model of the vehicle should be of not more than 8 years old, roadworthy all valid documents. 8. The vehicle shall be maintained in good running condition with good upholstery, fitness, good tyres and shall commensurate with the image of BARC. The tyres of the vehicles shall be replaced periodically and always with tyres of good condition. 9. The vehicle should be free from all sorts of defects and will be subjected to inspection by a representative of BARC whose decision is final and binding as regards suitability of that particular vehicle. 10. The vehicle should be transport vehicle and preferably in white colour with a board "ON GOVERNMENT OF INDIA DUTY". 11. The cost of POL, maintenance of vehicle including replacement of parts, wages of driver, Motor Vehicle taxes, comprehensive insurance, etc. shall be payable by the Contractor and BARC shall have no liability towards usage of the vehicle. 12. The cost of damages to any Government movable/immovable property in and around the site shall be entirely borne by the Contractor. 13. The rates are inclusive of all taxes if any, including Goods & Service taxes (GST).14. The contractor shall arrange adequate insurance coverage for his personnel. Department shall not be responsible for any liability arising out of any accident / injury caused to the driver while executing the job. 15. The contractor shall follow minimum wages act and other rules of Government of Maharashtra. 16. No revision of price shall be entertained during the period of contract. 17. Hours more / less than 8 Hrs. a day will be paid / deducted on pro-rata basis. 18. In case of absence of Driver/vehicle for entire week, a penalty of Rs. 3000 /- will be imposed for that week.

Supplying of unskilled man power / labour for loading / unloading, area cleaning, water tank cleaning and miscellaneous works etc including cost of equipment / material whichever is required at site.

Supply of skilled manpower for carrying out various plumbing maintenance works with necessary tools such as spanners, die of various diameters , pipe wrench etc. to attend pipe leakages at toilet, basin, urinalas, floor trap chock up, laying pipes, fixing of various plumbing fittings & fixtures and also carry out seasonable departmetal work, alloted by the project Engineer from time to time.

Supply of skilled manpower for carrying out various carpenrty work like minor repairs, fixing departmental fitting & fixures etc. as and when required and as directed by project engineer. Note: 1. Labour should carried necessary carpentry tools 2. payment shall be made as per the log book duly approved by the engineer In-charge.

Carrying out Civil Engineering works like surveying & leveling, checking of formwork fabrication, reinforcement fabrication as per drawings, witnessing sample retrieval & testing for various construction materials, ensuring concrete ingredient ratio at batching plant and pouring of appropriate grade of concrete in plain and reinforced concrete works, ensuring proper mixing of approved ingredients & waterproofing admixtures for mortars and brickwork, plaster, flooring & waterproofing works, and other civil & PH works including supervision of construction safety as per BARC specifications & relevant documentation, compiling, binding and preparation of tender documents & Agreements overall as directed by Engineer-in-Charge. Note : (1)Each Job shall be carried out by one qualified Technician having minimum SSC or Trade certificate in Masonary/Plumber/Carpenter/Painter Trade of less than one year duration from ITI/Government Recognised Vocational Training Institute. (2)Deployment: The contractor shall deploy one Technician for each job for minimum 8 ½ hours per day with 30 minutes of break, in General (Ist / IInd) or on Round the clock shift including Saturdays, Sundays & holidays whenever necessary as per the discretion of the Engineer-in-Charge during the contract period. In case of emergency works like continuous pouring of concrete or shutdown/maintainance work, the person will have to stay longer occasionally as per the instruction of the Engineer in-charge. No additional payment will be made on this account. (3) Period of work: The contractor shall carry out 1 Job per day for the period mentioned in NIT. (4) Mode of measurement : Measurement will be per job basis. A single job shall be carried out by deploying one Technician exclusively for the particular job. (5) Person should be engage after scrutiny of BARC Engineers and approved by Competent authority.

Dismantling brick work in Cement mortar carefully without damaging adjacent structures including stacking of materials and dispoal of unserviceable materials within 100 m lead as per direction of Engineer-in-charge

Providing and laying in position cement concrete of 1:3:6 (1 cement, 3 crushed sand, 6 graded stone aggregate of maximum size 20 mm) including consolidation, finishing, curing etc. complete as per specificationsand drawings but excluding the cost of Form work shuttering, centering Complete at all levels

Providing and constructing Brickwork in cement mortar 1:4 using crushed sand with Flyash / Flyash Lime bricks with minimum 70 kg / Sq. cm strength of approved make and size in Sub structure, including, scaffolding, raking out joints, curing, cleaning complete all as per specifications and drawings.

Providing Reinforcement Steel for reinforced cement concrete at all levels including supplying, preparation of bar bending schedules, cutting, bending, transporting, fixing, tieing in position with PVC coated G.I binding wire, all labour charges, cost of cover blocks in specified grade of concrete etc. complete as per specifications and drawings. Steel Supplied by the Contractor. "Using TMT bars of specified grades all dia. bars TMT bars to be supplied by the contractor, confirming to IS 1786. All test reports to be provided along with the supply of the materials." Note :1. The contractor shall supply documentary evidence of purchase of steel, Test certificate from approved manufacturers and also testing third party from approved laboratories with out any extra cost.2. Binding wire required for the work will have to be supplied by the contractor at their own cost and will not be measured for paymet. 3. Cover blocks shall be of same grade of concrete.

Providing, centering, shuttering Form work For Super Structure using steel plates, timber planks for all types of structures including necessary strutting, proping, staging, supports, bracings etc. and deshuttering the same after the specified time all as per drawings, specifications and as directed by the Engineer-in-charge at all levels

Providing 20 mm thick Internal plastering in C.M without cement punning 1:4 (using crushed sand) finished smooth, including sieving of sand to required fineness, preparation of the surface, scaffolding, curing all as per specifications, drawings and as directed at site complete.

B.L.Waghmare Baba & Co

Jai Malhar Constrction

laxmi engineering

RESHMA CONSTRUCTION