Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.9 LAccepted-AOC 107 1A TOLLYGAUNG ROAD KOLKATA 700026 WB | KOLKATA | WEST BENGAL | 700026 | L1 | Accepted-AOC Being lowest bidder | |
| 2 | L2₹49.7 L+₹3.3 L (7.11%)Rejected-Finance VILL PUILLYA PO UNSANI DISTT HOWRAH PIN 711302 | HOWRAH | WEST BENGAL | 711302 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹50.0 L+₹3.6 L (7.82%)Rejected-Finance 107 1F TOLLYGUNGE ROAD KOLKATA 700026 | KOLKATA | KOLKATA | WEST BENGAL | 700026 | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹51.6 L+₹5.2 L (11.3%)Rejected-Finance P 45 KHIRODE VIDYA BINOD AVENUE KOLKATA 700003 | KOLKATA | WEST BENGAL | 700003 | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹51.6 L+₹5.3 L (11.3%)Rejected-Finance 6 NALAPUKUR LANE FLAT 2C SENHATI COLONY KOLKATA 700034 WEST BENGAL | KOLKATA | WEST BENGAL | 700034 | L5 | Rejected-Finance Other than lowest |
Tender Value
₹42.2 L
EMD Value
₹84,360
Closing Date
8 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(FW) Kolkata
D9 Commissariat Road Hastings Kolkata 700022
PROVN OF PATHWAY FROM GORA BAZAR P-71 TO P-120 BAITHAK , WIDENING OF ROAD NEAR SBI TUNNEL AT FORT WILLIAM, PROVN OF PERIPHERY DRAIN AT GE OFFICE BLDG NO D-9, PROVN OF TWO WHEELER PARKING SHED FOR KP QTRS BLOCK NO 1 AT FORT WILLIAM AND PROVN OF WALKIN
2022_MES_545200_3
8885/FW/E8
Open Tender
Civil Works
Item Rate
180 days
GE(FW) Kolkata
Ref tender Documents
7 documents required · 7 mandatory
₹500
GE(FW) Kolkata
₹84,360
22 Oct 2022
29 Sept 2022
10 Oct 2022
29 Sept 2022
8 Oct 2022
1 Oct 2022
Amount
M&L for surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil.complete all as specified and directed.
M&L for excavating over areas not exceeding 1.5 metre deep and getting out in soft/loose soil complete all as specified and directed.
Excavation in trenches not exc 1.5 metre width and not exceeding 1.5 metre in depth in soft/loose soil and getting complete all as specified and as directed.
M&L for excavating in post holes (or similar holes) each not exceeding 0.5 Cum, getting out, returning filling in and ramming earth or broken rubble mixed with earh around in layers not exceeding 25 cm for soft/loose soil complete all as specied and directed.
Returning, filling in including spreading levelling watering and well ramming in layers n.exc 25 thick for soft/loose soil complete all as specified and as directed.
Removal of excavated material to a distance n.exc 50 metre and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed.
M&L for removing excavated soil upto a distance exc 250 m but not exc 500 m and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed.
Removing excavated soils outside MOD area and disposed off as per municipal instructions complete all as specified and directed
M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.
M&L for hardcore of gauge not exc 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to true surface with broken stones complete all as specified and directed.
M&L for plain cement concrete (1:3:6) type C2 using 40 mm graded aggregates in foundation filling and mass concrete complete all as specified and directed.
M&L for 75 mm thick plain cement concrete (1:3:6) type C-2 (40mm graded aggregate) in floors, foothpath, hardstanding etc. finished even and smooth without using extra cement complete all as specified and directed.
M&L for 25 mm thick plain cement concrete (1:2:4) type B-0 (12.5mm graded aggregate) in sub base of floors, foothpath, hardstanding etc.complete all as specified and directed.
M&L for PCC 1:2:4 type B-2 (using 40 mm graded stone aggregates) as in plinth protection, cemented path, hard standing and finished surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for plain cement concrete (1:2:4) type B1 using 20 mm graded aggregates in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including formwork complete all as specified and directed.
M&L for RCC 1:1½:3 type A1 (using 20 mm graded aggregate)as in slabs supported on walls, beams and columns in floors, roofs, drain, ducts, canopies etc. complete complete all as specified and as directed. (NOTE: MS reinforcement shall be measured and paid seperately)
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (horizontal or sloping) for rough finished surfaces complete all as specified and directed.
M&L TMT Bars 10 mm dia and over, cut to length, bent to shape required including crank-ing, bending and binding with and including Mild Steel Wire (annealed) not less than 0.90 mm, complete all as specified and as directed.
M&L for brickwork with fly-ash old size bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.
M&L for brickwork with fly-ash old size bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 complete all as specified and directed.
M&L for brickwork with sub class 'B' fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.
M&L for rendering 15 mm thick to fair faces of brick work / concrete surface in cement mortor (1:6) finished even and smooth without using extra cement complete all as specified and as directed.
M&L for rendering 10 mm thick to fair faces of brick work / concrete surface in cement mortor (1:4) finished even and fair complete all as specified and as directed.
M&L for rendering 15 mm thick to fair faces of brick work / concrete surface in cement mortor (1:4) finished even and smooth without using extra cement complete all as specified and as directed.
M&L for neeru finish to plastering with 1.5 mm thick lime putty, well finished with trowel complete all as specified and directed.
M&L for preparing new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.
S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 complete all as specified and directed. (NOTE: Quoted rates shall be deemed to include for cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing complete)
M&L for Mild steel framed works such as grills, gratings etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, framework of water tanks and similar works conforming to Fe-290 Gde E-165 complete all as specified and directed.
M&L for Mild steel bolts, purpose made, with hexagonal or square head one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or squer nut exc 30 cm long dia exc 12 mm but n. exc 20 mm complete all as specified and directed.
S&F 0.50 mm thick TCT (total coated thickness) pre-coloured galvalume sheets with minimum base metal thickness of 0.45 mm, single skin high rib/multi rib profile galvalume sheeting having 1000-1020 mm width and 28-30 mm high crest @ maximum 250-255 mm pitch (centre) with sheets manufactured out of 0.50 mm this TCT (total coated thickness) high tensile galvalume sheets having tensile strength 550 MPA with 18-20 micron top coat over 5 micron primer and 8-10 micron alkyld backer zinc aluminium alloy AZ-150, sheets having a dip metallic zinc (43.5%0 aluminium (55%) & silicon (1.5%) with total mass coating of 150 gms/sqm on both sides, having wide pans with minimum 3 small stiffening ribs for effective water shedding and special male/female ends with full return legs on laps as in wall cladding to wall complete all as specified and directed.
S&F in position, at or near ground level, factory made precast cement concrete kerb stone blocks, in M-25 grade cement concrete, fixed to the required line, level and curvature, jointed in cement mortar 1:3, including making joints with or without grooves (thickness of joints, except at sharp curves shall not be more than 5 mm) including making drainage opening wherever required complete all as specified and directed.
M&L for machine pressed precast concrete interlocking paver block with grey cement and pigment of any shape and size as approved by GE conforming to IS 15658-2006 of 60 mm thickness, M-35 grade complete all as specified and directed.
-ditto- but paver block with laquer coated glossy finish
M&L Sand filling under floors under paver block, thickness not exc 50 mm including consolidation complete all as specified and as directed
M&L for laying pre-polished 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed. (NOTE: Cost of sand cushioning is deemed to be included in the quoted rates)
Supply and laying factory made precast cement concrete cobble blocks, 60 mm thick, of M-35 grade with approved colour & design, laquer finished, as in footparth, lawns, drive ways, etc., of required strength, thickness & size/shape, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of cobbles into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of cobble blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed. (NOTE: Cost of sand cushioning is deemed to be included in the quoted rates)
S&F 15mm thick pre-polished decorative cement concrete tree guard tiles of approved size, design and colour laid on vertical surfaces over and including 15mm thick backing layer in cement mortar (1:4) set and jointed in neat cement slurry and pointed in white cement mixed with admixture of pigment to match the shade complete all as specified and as directed.
M&L for applying two coats of synthetic enamel paint over a coat of Red oxide, zinc chrome primer to new steel surfaces of any description over 10 cm width or girth including preparation of surfaces all as specified and directed.
M&L for reinforced concrete pipe 300 mm dia class NP3, laid and jointed with jute & cement mortar 1:2, complete with collars all specified and as directed.
M&L for Concrete bed to drain pipes 300 mm bore including packing under and hunching against the sides the pipe after there laid and tested in cement concrete (1:3:6) type C2 using 40mm graded aggregate complete all as specified and as directed
M&L for reinforced concrete pipe 450 mm dia class NP3, laid and jointed with jute & cement mortar 1:2, complete with collars all specified and as directed.
M&L for Concrete bed to drain pipes 450 mm bore including packing under and hunching against the sides the pipe after there laid and tested in cement concrete (1:3:6) type C2 using 40mm graded aggregate complete all as specified and as directed
M&L for reinforced concrete pipe 600 mm dia class NP3, laid and jointed with jute & cement mortar 1:2, complete with collars all specified and as directed.
M&L for Concrete bed to drain pipes 600 mm bore including packing under and hunching against the sides the pipe after there laid and tested in cement concrete (1:3:6) type C2 using 40mm graded aggregate complete all as specified and as directed
S&F RCPC (Reinforced Cement Polymer Concrete) grating slab of size 600 mm x 450 mm x 100 mm thick, of Capacity 3 MT fixed in proper position complete as directed by Engr-in -Charge.
S&F RCPC (Reinforced Cement Polymer Concrete) grating slab of size 600 mm x 450 mm x 75 mm thick, fixed in proper position complete as directed by Engr-in -Charge.
S&F RCPC (Reinforced Cement Polymer Concrete) grating slab of size 750 mm x 450 mm x 75 mm thick, fixed in proper position complete as directed by Engr-in -Charge.
Rolling and consolidation to required gradient and camber of formation surface (in cutting or filling) of roads with 8 to 12 tonne power roller including watering as necessary and consolidating to the required level, gradient or camber, keeping roller wheels wet, if required, filling in hollows and depressions which occur during rolling and provision of water, road roller, drivers, crew, fuel, labour, tools, etc complete all as specified and directed.
M&L for soling (or sub base) with broken boulders or quarried stone (spread thickness) 150mm thick laid in two layers of 75mm each, interstices filled, surface formed and each layer rolled seperataly with 8 to 12 Tonne power roller and consolidated to required gradient and camber complete all as specified and directed. (NOTE:- Measurement shall be done for 150 mm thickness)
M&L for 15cm thick (compacted thickness) WBM, laid in two layers (each 75mm thick) with coarse aggregates of granite, trap or basalt stone of grading 2 (63 to 40mm size), spread, rolled and consolidated to gradient and camber required with 8 to 12 ton power roller complete all as specified & directed. (NOTE:- Measurement shall be done for 150 mm thickness)
M&L for preparing unsurfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bage to remove all loose dirt etc complete all as specified & directed.
M&L for applying evenly a piming/tack coat with paving bituminous primer, grade VG-10 @ 10 kg/10 sqm on unsurfaced water bound macadam complete all as specified and directed.
M&L for premixed bituminous macadam with 4% binder content (using paving bitumen grade VG-30) by weight of total mix laid, rolled and compacted to required gradient and camber (consolidated thickness 75 mm or less) with 8 to 12 ton power roller complete all as specified & directed. (NOTE: No price adjustement shall be admissible in case the binder qty in the approved design mix is more than the specified qty in description of item above)
M&L for bituminous pre mixed carpet, 20mm consolidated thickness with 0.27 Cum of stone chippings mixed with 14.6 Kg of paving bituminous binder (VG-30), rolled and compacted to rquired camber and gradient with 8-12 Tonne power roller complete all as specified and directed.
M&L for applying a tack coat of 20/30 grade bitumen over existing bituminous surface @ 0.50 Kg/Sqm and providing and laying 20mm thick bitumen mastic asphalt on prepared surface strictly in accordance with IS specification No 5317-2002 (as latest modified) with mastic i.e. bitumen of grade 20/30 @ 4.50 Kg/ Sqm (minimum) mixed with stone dust (lime stone powder with calcium value 80%) @ 0.008 cum/Sqm and stone chipping of size 12.5mm and 10mm @ 0.0096 cum/sqm and sand @ 0.004 cum per Sqm and inserting precoated graded stone of 22mm size with 0.017 Kg/Sqm of 20/30 bitumen per Sqm for anti skiding including all tools and plants etc complete all as specified and directed.
M&L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.
PRABIR TRADERS
S.M.CONSTRUCTIONS
UNIVERSAL TRADING CENTRE
Somani Builders
M A ENTERPRISES
DEB AND COMPANY
MAZUMDER ENTERPRISE
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .