Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.7 LAccepted-AOC 16 A PATRIKA MARG DHEEERAJ KHURANA 77H 23 LAL BAHADUR SHASTRI MARG CIVIL LINES ALLAHABAD 993 ALLAHABAD UTTAR PRADESH 211001 | PRAYAGRAJ | UTTAR PRADESH | 211001 | L1 | Accepted-AOC Performance security Rs. 93,600.00 shall be submitted before 28 days from the acceptance of the contract as per Condition 19 of IAFW2249 otherwise necessary action will be taken against your firm | |
| 2 | L2₹21.8 L+₹2.8 L (14.8%)Rejected-Finance | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹1.2 Cr+₹1.0 Cr (534.4%)Rejected-Finance | L3 | Rejected-Finance Other than lowest bidder |
| Sl No | Description | Qty | Unit | SHREE Glass and Plywood L3 | UNIQUE FURNITURES SALES L1 | gangotri enteriprises L2 |
|---|---|---|---|---|---|---|
| 1.00Repair of under mentioned furniture items will be carried out as follows (Sl No 1.01 to 20.08 ):- (a) Removal of existing unserviceable material carefully without disturbing the adjoining parts from furniture articles as mentioned in the schedule.Supply and fixing new parts as per given specification and drg after tightening the joints, pinning, screwing, nailing, wedging, glueing,providing hinges, placing every part in-tact including polishing/painting the entire article with standard workmanship and as directed by GE/Engr-in-Charge.All furniture items is to be painted /poilshed only after making the entire item intact by tightening the joints. (Sl No 1.01 to 20.08 ) (b) Work will be executed where the furniture exist in different User Units of GE (Air Force ) Bamrauli including BSO's Furniture Yard as directed by Engr-in-Charge (Sl No 1.01 to 20.08):- (c) All Timber shall be of 1st class seasoned hard teak wood (Shegun/ Assam Teak ) free from knots and cracks else specified in drg. (Sl No 1.01 to 20.08). (d) Anti-termite and anti-bug treatment shall be done before polishing the wooden items. (Sl No 1.01 to 20.08) (e) For wooden items:M&L for melamine polish high gloss/mate finish with spray machine applying shellac,wood filler,shelar etc after removing of complete existing polish making surfae smooth by sand paper (Emery paper) with standard workmanship as directed by Engr-in-Charge to the following furniture articles of MES pattern viz F/DB/FD/MAP series/TP or Similar items incl applying wax for depressed surface as well as washing with caustic soda wherever required before polishing all as specified and all as directed by Engr-in-Charge. Shade of polishing/pinting will be directed by GE/Engr-in-Charge. There should be atleast one day gap in each step during polishing/painting .(Sl No 1.01 to 20.08 where ever applicable ) (f): For steel items:- M&L for painting two coat of hammer Tone paint with shade as approved by Engr-in-Charge/GE over a coat of primer through spray machine , both internally & externally to the furniture articles, viz F/FD/DB/MAP/TP series or similar items including removing of dust, dirts,dents etc and existing paint both internally & externally by applying paint remover/scrapping without damaging to surface , applying putty to level the surface before primer/painting, all as specified and shown on drgs and directed by Engr-in-Charge here should be atleast one day gap between every step of painting. Note: All material will be used to execute the work should be supplied by contractor in full no peacemeal material will be execpted.(Sl No 1.01 to 20.08 where ever applicable ) | ||||||
| 1.01Repair to Chair Wooden Bottom/Chair BKB (FD- 285) | ||||||
| 1.02 | M&L for in replacement of seat of chair wooden bottom, made out of 6mm thick commercial plywood, BWP grade, (perforated in the centre) fixed with 12 Nos screws of suitable size, all as per drawing and as specified and directed by the Engineer-in-Charge | 20 | Each | 1,000 ₹20,000 | 100 ₹2,000 Lowest | 200 ₹4,000 |
| 1.03 | M&L for in replacement of damaged front leg of chair wooden bottom with new leg of required size and shape, made out of well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge. | 15 | Each | 1,000 ₹15,000 | 100 ₹1,500 Lowest | 150 ₹2,250 |
| 1.04 | M&L for in replacement of damaged rear leg of chair wooden bottom with new leg of required size and shape, made out of well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge. | 14 | Each | 1,000 ₹14,000 | 140 ₹1,960 Lowest | 150 ₹2,100 |
| 1.05 | M&L for in replacement of damaged back rest of chair wooden bottom with new back rest of required size and shape, made out of well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge. | 10 | Each | 1,000 ₹10,000 | 200 ₹2,000 | 100 ₹1,000 Lowest |
| 1.06 | M&L for in replacement of damaged side rail of chair wooden bottom with new side rail of required size and shape, made out of well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge. | 14 | Each | 1,000 ₹14,000 | 40 ₹560 Lowest | 150 ₹2,100 |
| 1.07 | M&L for in replacement of damaged front rail of chair wooden bottom with new front rail of required size and shape, made out of well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge . | 15 | Each | 1,000 ₹15,000 | 40 ₹600 Lowest | 100 ₹1,500 |
| 1.08 | M&L for in replacement of damaged back rail of chair wooden bottom with new back rail of required size and shape, made out of well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge . | 12 | Each | 1,000 ₹12,000 | 80 ₹960 Lowest | 120 ₹1,440 |
| 1.09 | M&L for in replacement of damaged stiffener of chair wooden bottom with new stiffener of required size and shape, made out of well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge. | 16 | Each | 1,000 ₹16,000 | 30 ₹480 Lowest | 85 ₹1,360 |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
12 Jul 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Bamrauli
GE (AF) Bamrauli
REPAIR TO ALL TYPES OF WOODEN CHAIRS, TABLES, RIFLE RACKS, SIDE BOARD, BOOK CASE (WOODEN), TEAPOY, PEG TABLE, TABLE CENTRE, TABLE DINING ETC FOR OTM AND MD ACCN UNDER GE (AF) BAMRAULI
2025_MES_714824_1
8970/E8
Open Tender
Civil Works - Others
Works
180 days
GE (AF) Bamrauli
Please refer tender documents
7 documents required · 7 mandatory
₹500
GE (AF) Bamrauli
₹80,000
Yes
29 Sept 2025
16 Jun 2025
14 Jul 2025
16 Jun 2025
12 Jul 2025
30 Jun 2025
Amount
Repair of under mentioned furniture items will be carried out as follows (Sl No 1.01 to 20.08 ):- (a) Removal of existing unserviceable material carefully without disturbing the adjoining parts from furniture articles as mentioned in the schedule.Supply and fixing new parts as per given specification and drg after tightening the joints, pinning, screwing, nailing, wedging, glueing,providing hinges, placing every part in-tact including polishing/painting the entire article with standard workmanship and as directed by GE/Engr-in-Charge.All furniture items is to be painted /poilshed only after making the entire item intact by tightening the joints. (Sl No 1.01 to 20.08 ) (b) Work will be executed where the furniture exist in different User Units of GE (Air Force ) Bamrauli including BSO's Furniture Yard as directed by Engr-in-Charge (Sl No 1.01 to 20.08):- (c) All Timber shall be of 1st class seasoned hard teak wood (Shegun/ Assam Teak ) free from knots and cracks else specified in drg. (Sl No 1.01 to 20.08). (d) Anti-termite and anti-bug treatment shall be done before polishing the wooden items. (Sl No 1.01 to 20.08) (e) For wooden items:M&L for melamine polish high gloss/mate finish with spray machine applying shellac,wood filler,shelar etc after removing of complete existing polish making surfae smooth by sand paper (Emery paper) with standard workmanship as directed by Engr-in-Charge to the following furniture articles of MES pattern viz F/DB/FD/MAP series/TP or Similar items incl applying wax for depressed surface as well as washing with caustic soda wherever required before polishing all as specified and all as directed by Engr-in-Charge. Shade of polishing/pinting will be directed by GE/Engr-in-Charge. There should be atleast one day gap in each step during polishing/painting .(Sl No 1.01 to 20.08 where ever applicable ) (f): For steel items:- M&L for painting two coat of hammer Tone paint with shade as approved by Engr-in-Charge/GE over a coat of primer through spray machine , both internally & externally to the furniture articles, viz F/FD/DB/MAP/TP series or similar items including removing of dust, dirts,dents etc and existing paint both internally & externally by applying paint remover/scrapping without damaging to surface , applying putty to level the surface before primer/painting, all as specified and shown on drgs and directed by Engr-in-Charge here should be atleast one day gap between every step of painting. Note: All material will be used to execute the work should be supplied by contractor in full no peacemeal material will be execpted.(Sl No 1.01 to 20.08 where ever applicable )
Repair to Chair Wooden Bottom/Chair BKB (FD- 285)
M&L for in replacement of seat of chair wooden bottom, made out of 6mm thick commercial plywood, BWP grade, (perforated in the centre) fixed with 12 Nos screws of suitable size, all as per drawing and as specified and directed by the Engineer-in-Charge
M&L for in replacement of damaged front leg of chair wooden bottom with new leg of required size and shape, made out of well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge.
M&L for in replacement of damaged rear leg of chair wooden bottom with new leg of required size and shape, made out of well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge.
M&L for in replacement of damaged back rest of chair wooden bottom with new back rest of required size and shape, made out of well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge.
M&L for in replacement of damaged side rail of chair wooden bottom with new side rail of required size and shape, made out of well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge.
M&L for in replacement of damaged front rail of chair wooden bottom with new front rail of required size and shape, made out of well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge .
M&L for in replacement of damaged back rail of chair wooden bottom with new back rail of required size and shape, made out of well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge .
M&L for in replacement of damaged stiffener of chair wooden bottom with new stiffener of required size and shape, made out of well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge.
M&L for preparation of old/new wooden surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality with high gloss finish complete all as specified and as directed.
Repairs to Chair Easy (FD - 229)
M&L for in replacement of damaged front leg of Chair easy with well seasoned 1st class Teakwood, all as per drawing and as specified and directed by the Engineer-in-Charge
M&L for in replacement of damaged rear leg of Chair easy with well seasoned 1st class Teakwood, all as per drawing and as specified and directed by the Engineer-in-Charge.
M&L for in replacement of damaged arm-rest of Chair easy with well seasoned 1st class Teakwood, all as per drawing and as specified and directed by the Engineer-in-Charge.
M&L for in replacement of damaged fillet for canning of seat and back of Chair easy with well seasoned 1st class Teakwood, all as per drawing and as specified and directed by the Engineer-in-Charge .
M&L for in replacement of damaged rail of seat and back of Chair easy with well seasoned 1st class Teakwood, all as per drawing and as specified and directed by the Engineer-in-Charge.
Repair to Chair Dining (FD/MAP)
M&L for in replacement of damaged front leg of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge.
M&L for in replacement of damaged rear leg of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge
M&L for in replacement of damaged back rest of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge.
M&L for in replacement of damaged stiffener of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge.
M&L for in replacement of damaged side rail of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge.
M&L for in replacement of damaged front rail of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge.
M&L for in replacement of damaged back rail of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge.
M&L for in replacement of damaged fillet for canning of seat of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge .
M&L for in replacement of unserviceable seat of chair dining (Make- AMKO / COMFO/ Harmony to be required shape & size all as per drawing and as specified and directed by the Engineer in Charge .
Repair to Chair Dining with Cushion (FD/MAP)
M&L for in replacement of damaged front leg of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge.
M&L for in replacement of damaged rear leg of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge
M&L for in replacement of damaged back rest of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge.
M&L for in replacement of damaged stiffener of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge.
M&L for in replacement of damaged side rail of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge.
M&L for in replacement of damaged front rail of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge.
M&L for in replacement of damaged back rail of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge.
M&L for in replacement of seat of chair dining with cushion, Seat shall be 12 mm thick BWR grade phenol bonded plywood, commercial vennered both sides, fixed to rails with 12 Nos. steel screws of suitable size. The seat ply shall be covered with removeabl 75 mm thick 32 density foam cushion with approved upholstery fabric of best quality as approved by the GE of rate Rs.300/- per meter. All as per drawing and as specified and directed by the Engineer-in-Charge
Repair to Chair Writing (FD - 280 )
M&L for in replacement of damaged front legs of Chair writing made out of well seasoned 1st class Teak wood, all as per drawing and as specified and directed by the Engineer-in-Charge.
M&L for in replacement of damaged rear legs of Chair writing made out of well seasoned 1st class Teakwood, all as per drawing and as specified and directed by the Engineer-in-Charge .
M&L for in replacement of damaged back rest of Chair writing made out of well seasoned 1st class Teakwood, all as per drawing and as specified and directed by the Engineer-in-Charge.
M&L for in replacement of damaged stiffener of Chair writing made out of well seasoned 1st class Teakwood, all as per drawing and as specified and directed by the Engineer-in-Charge
M&L for in replacement of damaged fillet for canning of seat of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge.
Table (FD-275)
S&F of Top 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Ply/Archid ply duly post -formed with 0.6 mm thick laminate in colour/shade as approved by Engr-in-Charge/GE with 1.6 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.
Legs as per drg
Foot rest as per drg
Stiffener side as per drg
Cabinet box with vertical and horizontal partitions with 18 mm thick BWP grade plywood ( Make: Green Gold from Greenply/Gold from Archidply/ Bond 710 from Century ply)) over which pasting of sunmica 0.80mm ( Make: Greenply/Archidply/Century ply) pasted on exposed view and other side with balancing white sunmica with suitable adhesive of shade approved by Engr-in-Charge/GE all as directed by GE/Engr-in-Charge. Back ply shall be 12 mm BWP grade.
Cabinet door made out of 18 mm thick BWP grade plywood ( Make: Green Gold from Greenply/Gold from Archidply/ Bond 710 from Century ply)) over which pasting of sunmica 0.80mm ( Make: Greenply/Archidply/Century ply) pasted on exposed view and other side with balancing white sunmica with suitable adhesive of shade approved by Engr-in-Charge/GE and drg. Lock (Make: Hettich/Ebco/Quba/Klazovyn) and CP Handle 4" (Make: Hettich/Ebco/Quba/Klazovyn) be provided in Cabinet all as directed by GE/Engr-in-Charge and as per drg.
Back ply BWP grade as per drg.
Drawer made of 18 mm thick BWP grade plywood over which pasting of sunmica 0.80mm of approved shade by Engr-in-Charge/GE with suitable adhesive as approved by Engr-in-Charge/GE in front, sides/back shall be of 18 mm thick BWP plywood and bottom of drawer shall be 9 mm thick BWP Plywood complete. Telescopic channel (Make: Hettich/Ebco/Quba/Klazovyn) and CP Handle 4" as per sample held in BSO yard be provided in Drawers all as directed by GE/Engr-in-Charge. Synthetiv Enamel Paint to be applied two coats in all surfaces after applying wooden putty except front of drawers.
Recanning of various types of chairs / stool with plastic cane half round 2mm wide 0.35 mm thick (4mm wide semi round for border) best quality as per Godrej pattern including removing of old cane complete all as specified and directed. Make of cane : Premier.
Recanning of Chair writing
Recanning of Chair dining
Recanning of Chair easy
Table 3'X2' with / without Drawer (FD-284/283)
Top 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Ply/Archid ply) duly post -formed with 0.6 mm thick laminate in colour/shade as approved by Engr-in-Charge/GE with 1.6 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.
Legs as per drg
Long rail as per drg
Short rail as per drg
Center Stiffener as directed by Engr-in-Charge
Short stiffener as per drg
Drawer made of 18 mm thick BWP grade plywood over which pasting of sunmica 0.80mm of approved shade by Engr-in-Charge/GE with suitable adhesive as approved by Engr-in-Charge/GE in front, sides/back shall be of 18 mm thick BWP plywood and bottom of drawer shall be 9 mm thick BWP Plywood complete. Telescopic channel (Make: Hettich/Ebco/Quba/Klazovyn) and CP Handle 4" as per sample held in BSO yard be provided in Drawers all as directed by GE/Engr-in-Charge. Synthetiv Enamel Paint to be applied two coats in all surfaces after applying wooden putty except front of drawers.
Fancy Knob CP as per sample held in yard.
Wooden corners to be provided all as directed by Engr-in-Charge/GE.
Repair to Table 900’ X 900’ X 760’ (FD-88 and FD- 291)
Top 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Ply/Archid ply) duly post -formed with 0.6 mm thick laminate in colour/shade as approved by Engr-in-Chage/GE with 1.6 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.
M&L for in replacement of leg of Table of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed.
M&L for in replacement of front rail of Table of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed.
M&L for preparation of old/new wooden surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality with high gloss finish complete all as specified and as directed.
Table Centre (FD-274)
Top 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Ply/Archid ply duly post -formed with 0.6 mm thick laminate in colour/shade as approved by Engr-in-Chrge/GE with 1.6 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.
Legs as per drg.
Top rail/stiffener as per drg
Bottom rail as per drg.
Top short rail to be provided irrespective of drg.
Stiffener between bottom rail to be provided irrespective of drg.
Wooden corners to be provided all as directed by Engr-in-Charge/GE irrespective of drg.
Peg Table (FD-277)
Top 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Ply/Archid ply duly post -formed with 0.6 mm thick laminate in colour/shade as approved by Engr-in-Charge/GE with 1.6 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.
Legs as per drg.
Top rail/Bottom Rail rail as per drg irrespective of drg.
Top short rail to be provided irrespective of drg.
stiffener between bottom rail to be provided irrespective of drg.
Side Board (FD-241)
Cabinet box complete with vertical and horizental partitions made of 18 mm thick BWP grade plywood (Make: Green Gold from Greenply/Gold from Archidply/ Bond 710 from Century ply)) over which pasting of sunmica 0.80mm ( Make: Greenply/Archidply/Century ply) of shade approved by Engr-in-Charge/GE with suitable adhesive on one side and deco paint to be applied two coats on other side all as directed by GE/Engr-in-Charge and as per drg. Back ply shall be 12 mm BWP grade as per drg.
Cabinet door made out of 18 mm thick BWP grade plywood (Make: Green Gold from Greenply/Gold from Archidply/ Bond 710 from Century ply)) over which pasting of sunmica 0.80mm ( Make: Greenply/Archidply/Century ply) of shade approved by Engr-in-Charge/GE with suitable adhesive for both sides all as directed by GE/Engr-in-Charge and drg. SS Piano higes shall be used for fixing. Lock (Make: Hettich/Ebco/Quba/Klazovyn) and CP Handle 4" (Make: Hettich/Ebco/Quba/Klazovyn) be provided in Cabinet all as directed by GE/Engr-in-Charge and as per drg.
Drawer made of 18 mm thick BWP grade plywood over which pasting of sunmica 0.80mm of approved shade by Engr-in-Charge/GE with suitable adhesive as approved by Engr-in-Charge/GE in front, sides shall be of 1st class teak wood and bottom of drawer shall be 9 mm thick BWP Plywood complete. Telescopic channel (Make: Hettich/Ebco/Quba/Klazovyn) and CP Handle 4" (Make: Hettich/Ebco/Quba/Klazovyn) be provided in Drawers all as directed by GE/Engr-in-Charge and as per drg. Duco paint to be applied two coats in all surfaces except front of drawers.
Base Frame structure to be made complete with 25mm dia PVC shoeall as specified and as per drg.
Book Case - FD- 237/ DB
M&L for in replacement of back of book case with 6 mm thick commercial ply wood BWR grade , ISI marked complete, all as specified and shown in drawing and as directed.
M&L for in replacement of table top with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 4 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed .
M&L for in replacement of shelves of book case, all as specified and shown in drawing and as directed .
M&L for in replacement of door shutter with knob of book case, all as specified and shown in drawing and as directed .
M&L for in replacement of leg of book case, all as specified and shown in drawing and as directed .
M&L for in replacement of cover of sofa cushion, size of cushion shall be 530 mm x 500mmx100mm thick, colour and shade as approved by GE(Cost not less than Rs 300/- per metre) complete with stiching and chain as per sample held with furniture yard
Repair to Rable Dining for 6/8 Persons (FD-30, 273 and 376)
Top 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Ply/Archid ply duly post -formed with 0.6 mm thick laminate in colour/shade as approved by Engr-in-Charge/GE with 1.6 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg for table dining 6 pers.
Top 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Ply/Archid ply duly post -formed with 0.6 mm thick laminate in colour/shade as approved by Engr-in-Charge/GE with 1.6 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg for table dining 8 pers
M&L for in replacement of long rail of Table dinning (06 persons) of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed .
M&L for in replacement of long rail of Table dinning (08 persons) of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed .
M&L for in replacement of leg of Table dinning (08/06 persons) of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed .
M&L for in replacement of short rail of Table dinning (08/06 persons) of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed .
Repair to Table Dining of size 1200MM X 900MM
Top 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Ply/Archid ply duly post -formed with 0.6 mm thick laminate in colour/shade as approved by Engr-in-Charge/GE with 1.6 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.
M&L for in replacement of long rail of Table dinning of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed .
M&L for in replacement of leg of Table dinning of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed.
M&L for in replacement of short rail of Table dinning of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed .
Repair to Rifle Racks for 20 Rifles
M&L for in replacement of repair to Rifle racks by taking down the existing broken / unserviceable plank in the bottom of racks and supply and fixing of new well seasoned second class hard wood Shisham plank with standard grooving all as per drawing and as specified and directed by the Engineer-in-Charge
M&L for in replacement of repair to Rifle racks by taking down the existing broken / unserviceable plank in the Top of racks and supply and fixing of new well seasoned second class hard wood Shisham plank complete with proper cutting shape for keeping of rifles all as per drawing and as specified and directed by the Engineer-in-Charge
M&L for in replacement of repair to Rifle racks by taking down the existing broken / unserviceable leg and supply and fixing of new well seasoned second class hard wood Shisham leg all as per drawing and as specified and directed by the Engineer-in-Charge
M&L for in replacement of taking down the existing broken / unserviceable rubber strip and supply and fixing of new Rubber strip for barrel rest all as per drawing and as specified and directed by the Engineer-in-Charge
M&L for preparation of old / new wooden surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality with high gloss finish complete all as specified and as directed.
Teapoy Wooden
Top 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Ply/Archid ply) duly post -formed with 0.6 mm thick laminate in colour/shade as approved by Engr-in-Charge/GE with 1.6 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.
Legs as per drg.
Top rail/stiffener as per drg
Bottom rail as per drg.
Top short rail to be provided irrespective of drg.
Stiffener between bottom rail to be provided irrespective of drg.
Wooden corners to be provided all as directed by Engr-in-Chage/GE irrespective of drg.
(a) Anti-termite and anti-bug treatment shall be done before polishing the wooden items. (b) M&L for melamine polish high gloss/mate finish with spray machine applying shellac,wood filler,shelar etc after removing of existing polish making surfae smooth by sanding and grinding with standard workmanship as directed by Engr-in-Charge to the following furniture articles of MES pattern viz F/DB/FD/MAP series/TP or Similar items incl applying wax for depressed surface as well as washing with caustic soda wherever required before polishing all as specified and all as directed by Engr-in-Charge. Shade of polishing/pinting will be directed by GE/Engr-in-Charge. There should be atleast one day gap in each step during polishing. (c) Work will be executed where the furniture exist in different User Units at OTM under the jurisdiction of GE (AF) Bamrauli including BSO's Furniture Yard as directed by Engr-in-Charge.
Table 3'X2' with / without Drawer (FD-55/284/283 or simillar)
Table 3'X3' (FD- 88& 291or simillar)
Table Dining 4 Persons (FD-273, 30 or similar type/MAP Drg)
Table Dining 6 Persons (FD-273, 30 or similar type/MAP Drg)
Table Dining 8 Persons (FD-273, 30 or similar type/MAP Drg)
Table writing (FD-33,275, DB-3982 or similar type)
Table Centre (FD-274 / 235)
Teapoy (FD-278, 34, 382)
Peg Table (FD-277/ 384, DB-3973)
Chair Easy
Chair Writing
Chair Dining
Sofa Set 5 Seater
Sofa Set 4 Seater
Chair writing map with cushion (FD/E6/MAP/12) (powder coating painting as per drg specification duly removing the existing paint or directed by Engr-in-Charge)
M&L for in replacement of cushion for sofa set of size 560 mm X 530 mm X 100 mm thick, 40 density (Model name :Primo of make Sleep well /Model name Goldline Plus of make :Kurlon), including tapesty cloth of best quality (cost not less than Rs.500/- per metre ) and stitching in required shade and colour including one side shall be left open by giving proper margin of cloth towards inside upto 2 inch for the purpose of washing to cover complete as per sample all as specified and shown in drawing and directed.
M&L for in replacement of cushion for stool of dressing table ladies map as per drgh (Model name :Primo of make Sleep well /Model name Goldline Plus of make :Kurlon), including tapesty cloth of best quality (cost not less than Rs.500/- per metre ) and stitching in required shade and colour including one side shall be left open by giving proper margin of cloth towards inside upto 2 inch for the purpose of washing to cover complete as per sample all as specified and shown in drawing and directed.
M&L for in replacement of cushion of 40 density suitable for Chair easy as per drg (Model name :Primo of make Sleep well /Model name Goldline Plus of make :Kurlon), including tapesty cloth of best quality (cost not less than Rs.500/- per metre ) and stitching in required shade and colour including one side shall be left open by giving proper margin of cloth towards inside upto 2 inch for the purpose of washing to cover complete as per sample all as specified and shown in drawing and directed.
Repairs to Almirah Large Steel (FD- 1031) :-
M&L for in replacement of lock of almirah large steel of Make : Harison, Godrej of suitable size with duplicate keys as per sample, fixed with screws complete all as specified and shown in drawing and directed by the Engineer-in-Charge.
M&L for repair to door shutter with denting and necessary adjustment incl whole body denting and tighting as required complete all as specified and directed by the Engineer-in-Charge.
M&L for in replacement of door shutter of almirah large steel made of 1.2 mm thick mild steel black sheet complete all as specified and shown in drawing and directed by the Engineer-in-Charge.
M&L for in replacement of handle of almirah large steel chromium plated fixed with screws, complete all as specified and shown in drawing and directed by the Engineer-in-Charge.
M&L for in replacement of leg of almirah large steel made of 1.2 mm thick mild steel black sheet including necessary cuttings, made to shape, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge.
M&L for in replacement of hinge of almirah large steel,mild steel, 100mm size of approved quality fixed with screws complete all as specified and shown in drawing and directed by the Engineer-in-Charge.
M&L for in replacement of shelf of almirah large steel made of 1.2mm thick mild steel black sheet including necessary cuttings, made to shape, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge.
M&L for preparation of old / new painted steel surfaces (external and internal duly rubbing the whole almirah including intenally and existing old paint from almirah) and applying powder coating paint as per drawing with stage passing with full satisfaction of E-in- Charge including preparation of surfaces and filling cavities with putty and primer wherever required complete all as specified and directed by the Engineer-in-Charge.There should be atleast one day gap between every step of painting.
Repairs to Almirah Medium Steel with Shelve, FD-67M
M&L for in replacement of lock of almirah medium steel of Make : Harison, Godrej of suitable size with duplicate keys as per sample, fixed with screws complete all as specified and shown in drawing and directed by the Engineer-in-Charge.
M&L for repair to door shutter with denting and necessary adjustment incl whole body denting and tighting as required complete all as specified and directed by the Engineer-in-Charge.
M&L for in replacement of door shutter of almirah medium steel made of 1.2 mm thick mild steel black sheet complete all as specified and shown in drawing and directed by the Engineer-in-Charge.
M&L for in replacement of handle of almirah medium steel chromium plated fixed with screws, complete all as specified and shown in drawing and directed by the Engineer-in-Charge.
M&L for in replacement of leg of almirah medium steel made of 1.2 mm thick mild steel black sheet including necessary cuttings, made to shape, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge.
M&L for in replacement of hinge of almirah medium steel,mild steel, 75mm size of approved quality fixed with screws complete all as specified and shown in drawing and directed by the Engineer-in-Charge.
M&L for in replacement of shelf of almirah medium steel made of 1.2 mm thick mild steel black sheet including necessary cuttings, made to shape, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge.
M&L for preparation of old / new painted steel surfaces (external and internal duly rubbing the whole almirah including intenally and existing old paint from almirah) and applying two coat of synthetic enamel paint by spray painting including preparation of surfaces and filling cavities with putty and primer wherever required complete all as specified and directed by the Engineer-in-Charge.There should be atleast one day gap between every step of painting.
Repairs to Various Type of Executive Chair with High Back
M&L for in replacement of old unserviceable steel base of chair and supply and fixing of new Steel base for Make: Godrej / durian /Methodex complete all as specified and shown in drawing and as directed.
M&L for in replacement of old unserviceable fiber base of chair and supply and fixing of new fiber base Make: Godrej / durian /Methodex complete all as specified and shown in drawing and as directed.
M&L for in replacement of old unserviceable hydrolic of chair and supply and fixing of new hydrolic Make: Godrej / durian /Methodex complete all as specified and shown in drawing and as directed.
M&L for in replacement of old unserviceable tilt mechanism of chair and supply and fixing of new tilt mechanism complete all as specified and shown in drawing and as directed.
M&L for in replacement of old unserviceable arms of chair and supply and fixing of new arms Make: Godrej / durian /Methodex complete all as specified and shown in drawing and as directed.
M&L for in replacement of old unserviceable push back of chair and supply and fixing of new push back of complete all as specified and shown in drawing and as directed.
M&L for in replacement of old unserviceable wheel of chair and supply and fixing of new wheel of complete all as specified and shown in drawing and as directed.
M&L for in replacement of old unserviceable seat base of chair and supply and fixing of new seat base 12mm thick readymade as per existing of complete all as specified and shown in drawing and as directed.
M&L for in replacement of old unserviceable back base of chair and supply and fixing of new back base 12mm thick readymade as per existing of complete all as specified and shown in drawing and as directed.
M&L for polishing old wooden arms of chair by scrubbing and applying lacquer polish one or more coat to achive required finish complete all as specified and shown in drawing and as directed.
M&L for polishing old wooden base of chair by scrubbing and applying lacquer polish one or more coat to achive required finish of approved colour and shade.
M&L for in replacement of old cloth and cushion for seat and back of chair by taking out seat and back, changing cloth of seat and back with leather / crape or matti of not less than Rs 200/- per meter including changing / replacement of foam cushion of seat and back with 32 density foam (as approved) of required existing thickness and size including all new hardware and accessories and refixing complete all as specified and directed.
Bed Ply Wood Top ( FD-246)
Long Rail all as shown on drg and as specified .
Short rail /Stiffners all as shown on drg and as specified
Head Rest complete as shown on drawing and as specified .
Foot Rest complete all as shown on drawing and as specified.
Replacement of unserviceable Top with Ply top 12 mm thick BWP Grade (Make: Green Gold from Greenply/Gold from Archidply/ Bond 710 from Century ply) all as per drg.
Replacement of Teak face ply 4 mm thick (Make: Green Gold from Greenply/Gold from Archidply/ Bond 710 from Century ply) in head rest as per drg.
Replacement of Teak face ply 4 mm thick (Make: Green Gold from Greenply/Gold from Archidply/ Bond 710 from Century ply) in foot rest as per drg.
Wooden corners to be provided in shape all as directed by Engr-in-Charge/GE.
Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material
gangotri enteriprises (BID ID -3348988)
SHREE Glass and Plywood (BID ID -3347482)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .