SPL REPAIR TO RCC OVERHEAD TANK REPLACEMENT OF HPSV T5 STREET LIGHT AND PROVN OF CERTAIN REVENEW AND MINOR WORKS AT BAGRAKOTE MIL STN UNDER GE SEVOKE ROAD

Amount

Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth n exc 10sqm on plan and n exc 1.50m in depth and getting out in hard/dense soil complete all as specified and directed.

M&L plain cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggrigate) as in surface channels and drains complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan, exc 6m mean radius built in CM 1:6 complete all as specified and directed..

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed..

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed..

Excavation over areas n.exc 1.5 m deep and getting out in Hard/Dense Soils complete all as specified and directed.

Ditto all as item No 06 above but additional 1.5m or part thereof in depth beyond the first 1.50 m all as specified and directed.

M&L precast RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in cover slab set in CM 1:6 including necessary formwork complete all as specified and directed.

M&L for mild steel TMT bars 8mm dia, cut to length bent to shape required incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire annealed, not less than 0.90mm dia or securing with clips, all as specified.

Excavation in trenches, n. exc 1.5m wide and n.exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and and getting out in soft/loose soil complete all specified and directed.

M&L rendering 15mm thick in CM 1:6 on brick or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed..

M&L rendering 5mm thick in CM 1:3 on ceiling surfaces finished even & smooth without using extra cement complete all as specified and directed..

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4, finished even and smooth without using extra cement, including mixing WPC as per manufacturers instructions complete all as specified and directed..

Supply only integral water proofing compound.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:3, finished even and smooth without using extra cement, incl mixing WPC as per manufacturers instructions complete all as specified and directed..

S&F mild steel bars TMT 10 mm dia and over, cut to length,bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conferming to all as specified and directed.

M&L formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or sloping) for flat complete all as specified.

M&L for 75 mm thick PCC 1:4:8, type D2 (using 40 mm graded stone agg) as in sub base complete all as specified and directed.

M&L 75 mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection, finished even & fair without using extra cement complete all as specified and directed.

M&L preparing new plastered surfaces and applying three coats of white wash on walls complete all as specified and directed.

M&L preparing new plastered surfaces and applying three coats of white wash on ceiling.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed.

M&L for brushing neat cement slurry with 3.0kg of cement per Sqm.

Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in skirtings etc. set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces.

M &L wiring with 1.50 Sqmm (nominal area) FRLS PVC insulated 1100 volts grade multi stranded copper conductor single core unsheathed cable drawn through and unsheathed single core solid copper conductor cable of size 1.50 Sqmm as earth continuity conductor connected to common earth dolly,PVC Casing /Capping of suitable size, with all fittings and accessories including provision of PVC Box fixing switches / sockets / regulators etc. fixed in f wall with screws and cap washer complete for5/6 Amp socket point on independent board.

All as per item No.27 here-in-before but with2.5 Sqmm cable for 15/16 Amp socket point on independent board and 2.50 sqmm solid copper cable for earth continuity conductor.

S&F Switch piano flush type, single pole, one way, 5/6Amp complete all as specified and as directed.

S&F Switch Socket combination, 2-in-1, 3 pin, 5/6 Amps flush type complete all as specified and as directed.

S&F Switch Socket combination, 5-in-1, 5/16 Amps flush type complete all as specified and as directed.

S&F Ceiling rose, surface bakelite, 3 terminals complete all as specified and as directed.

S&F SPN MCB of capacity 32 Amps, 240 volts, complete all as specified and as directed.

S&F MCB, SPN,240 volts, breaking capacity 10 KA, rating 63 amps, complete all as specified and as directed.

S&F MCB, SP,240 volts, breaking capacity 10 KA, rating 6 to 32 amps, complete all as specified and as directed.

S& F MCB TPN 63 AMP breaking capacity 10 KA complete all as specified and directed.

Material and labour for concealed sub main wiring surface type with two nos single core PVC insulated unsheathed multi strand copper conductor FRLS cable of size 6 sqmm and one no single core PVC insulated unsheathed multi strand copper conductor FRLS cable of size 6 sqmm as in continuous earth wire drawn into and including surface rigid non-metallic ISI marked PVC conduit medium grade with all fittings and fixings accessories complete all as specified and as directed.

S&F Sheet Metal enclosure( IP-43) for SPN DBs,08Ways, Single Door, suitable for mounting DP MCB as incomer & SP MCBs as outgoings, built- in bus bars complete suitable for 240 Volts, AC, 50 Hz supply, and fixed in recess in brick masonary wall all as specified and as directed

Supply and fixing LED street light fittings with and including lamp (minimum 72W rating), separate individual peanut plated Lens housing should be made of LM6 Pressure die Cast Aluminum . Optical cover should be only Toughened Glass only, Impact Resistance >IK05, IP Protection not less than IP 66, Protection should be Class I vibration should be as per IEC 60598, Product Standard IS 10322/IEC 60598, Driver Operating Voltage should be 140 V-270V, Driver Frequency 50Hz, Power Factor>0.9, Lumen output should not be less than 100 Lumen/watt and Luminaries driver ckt should be moulded type weather proof construction with separate surge protection device 5kA rating and separate connector block for termination of incoming cable connection including taking down old U/S HPSV/T5 street light from existing pole all as specified and directed. Make : Philips, cat part No. BRP410 LED CW 072 MR FG S1 PSU GR or equivalent model of make Havells India Ltd/ Surya Roshni Ltd./ Wipro/ GE/ Bajaj, as approved by the GE. Note : (i) Being a highly humid area the driver of LED fitting shall be moulded type weatherproof type. Separate SPD to be provided for each fitting of same make. (ii) The moulded driver of LED light fitting should be of same make of light fittings. (iii) Earth connection of each light fittings should be connected to system earth point either with 3 core cooper cable or separate earth cable.

Supply & fixing of weather proof pvc insulated copper conductor cable 1.5 sqmm 3 core duly inserting the cable inside the pole including making hole on top and bottom of the steel pole all as directed .

S&F street light bracket made out of GI tubing 40mm bore, medium grade, 1.5 metre long bent to shape as directed, including suitable MS clamp of F.I. 50 x 6mm with MS bolts, nuts and washer fixed to steel tubular pole duly painted with two coats of aluminium paint complete including taking down u/s bracket all as specified

M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick burried directly in ground (in vertical position ) earth pit not less than 2.25 mtrs below normal ground level with the top edgeof the earth plate not less than 1.5 mtr (B.G.L.) & connected to galvanised iron wire 4 mm dia by means of bolts,nuts,checknuts & washer of galvanised iron including PCC (1:2:4) type B1 precast RCC cover slab with suitable handle made pf 6 mm round bar, including necessary excavation & earth work in any type of soil , 20 mm dia med grade galavinised steel tube for watering with one end fixed with cast iron funnel & wire mesh, 15 mm bore light grade galvanised steel tubing up to 7.5 mtr length for drawing earth lead GI strip proctection & common salt , charcoal in alternate layers etc. complete all as shown in EP no 3 of SSR Part 1 & testing on complection incl taking down old unsv earthing complete.

Supply and fixing steel tubular swaged poles type 410 SP-22 (8.5 meter long) complete with CI base plate and finial taper plug, bolts, nuts & screws as specified.

Excavation in trenches exceeding 1.5 mtr and n. exc 3.0 mtr depth for fixing of poles of various size and getting out in soft / loose soil all as specified and as directed .

M&L for sand cushioning in cable trenches over & under the cables, with river washed coarse sand, as per standard practice with proper compaction complet all as specified and directed by Engr-in-Charge. (Punned thickness shall be considered for payment).

M&L for brick protection over cables inside the trench by using common burnt clay building bricks,sub-class"B" laid dry and flat and width wise along the axis of the trench complete all as specified and as directed by Engineer-in-Charge.

Supply,laying, connecting and testing , Galvanised steel water tubing, light grade, nominal dia 25 mm, for protection of cable as required at site complete all as specified and directed by the Engr-in-charge.

Supply,laying, connecting and testing , Galvanised steel water tubing, light grade, nominal dia 40 mm, for protection of cable as required at site complete all as specified and directed by the Engr-in-charge.

Dismantling of old damaged U/S concrete pole/struts, any size and removing from site and making. The distrubed surface good complete all as specified and directed.

Supplying , Laying, connecting and testing XLPE insulated,sheathed, armoured,heavy duty electric power cable with aluminium conductor suitable for 1100 Volts grade and having cross sectional area 6 Sqmm 2 Core including taking up old unserviceable cable complete all as directed by Engr-in-Charge.

Supplying , Laying, connecting and testing XLPE insulated,sheathed, armoured,heavy duty electric power cable with aluminium conductor suitable for 1100 Volts grade and having cross sectional area 10 Sqmm 2 Core including taking up old unserviceable cable complete all as directed by Engr-in-Charge.

All as per item No 51 above but sec. area 16 sq. mm 4 core

Supply and fix thermoplastic polycarbonate street light juntion box suitable for connection of cable , cable size range 10-25 Sqmm cat No KF1616B, size 155X210X92mm which is totally safe, shock proof, impact resistant, weather proof, dust proof, rust proof ,halogen and slica free, having internal embedded gasket technology made of PUR, complete with IP 66degree of protection with cable glands M-25-2 Nos material polymide in and including the following :- Junction box with 5 way Hensel terminal arrangement and 3 Hensel terminal block and fixing arrangement of one MCB 6 Amp) and having metric knock out on 4 sides ) - 01 Nos,cable gland -03 Nos, Lock nut - 03 Nos, MCB SP, 6 Amps - 01 Nos complete all as specified and directed. Make:- Hansel or equivalant in sintax Industries limited/ C&S.

S&F 20 mm dia Rigid non-metallic PVC conduit (medium grade) fixed with FI clamps, nuts and bolts of suitable size with nuts & bolts for protection of connecting wires, connection from junction box to light fittings, complete all as specified and directed.

Boring in road/PCC foot path for passing the cable through GI Pipe 25mm bore complete all as directed by Engr-in-charge.( Cost of GI pipe of 40mm dia will be measured in relevant Item)

M&L for P.C.C. 1:4:8 (Type D-2,40mm graded stone aggregate) as in foundation filling or for mass concrete of poles,stays,struts or any other indicated work including form work(if required) complete all as directed by Engr-in-Charge

M&L for P.C.C. 1:2:4 Type B-1 (20mm graded stone aggregate) for coping of poles / platform of feeder pillar box or any other indicated work including form work(if required) duly plastered and making the surface smooth and even by using extra cement complete all as directed by Engr-in-Charge

Demolition and Dismantling Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M&L for Nominal mixed cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for Brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls,built in CM 1:4 complete all as specified and directed.

M&L for screed bed or bedding layer of cement mortar 1:6, 15mm thick for laying floor finishes complete all as specified and directed.

M&L for rendering in CM (1:4), 10mm thick on fair faces of brick work or concrete surfaces for fixing of wall tiles/Kota stone complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surfaces, 300 x 200 x 7mm thick, set and jointed in neat cement slurry and pointed in white/coloured cement to match the surfaces.

M&L 75mm Dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement.

S&F 15mm bore stop valves, cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges.

S&F Vitreous China wash basins, white, flat back, size 550x400mm excluding taps, waste but including brackets complete all as specified and directed.

Supply only Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and flynuts, screwed for iron pipe and fixed.

S&F PVC connection 15mm dia with PTMT nuts of length 450mm.

S&F low density 32mm dia, polythene waste pipe (LDPE) of pressure rating 0.6 Kgf/Cm2.

S&F 15mm dia GI pipe, medium grade, with all fittings and fixed in short length complete to walls and ceilings or laid in foors complete all as specified and directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls or in floors, 75mm single socketed

M&L 32mm dia PTMT waste coupling ,half or full threaded

S&F pressed steel frames (size-105X60mm) for doors with one rebate incl necessary fixing lugs, hinges, lock strike plate etc complete as specified .

S&F factory made 2nd class hard wood rail and style 35mm thick plain framed, panelled shutter withiout interlocking rail and one panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS:1003 (part I), kiln seasoned and chemically pressure treated.

S&F 300 mm long mild steel sliding door bolts plate type stove enamelled black with bright bolts not less than 12mm dia with including a minimum of 6 bolts nut four on bolts plate & two on staple plate .

S&F mild steel tower bolts stove enameled black with bright bolt 200 mm long.

S&F mild steel pressed handle ovel type stove anamelled black 150 mm long.

M&L for preparation of new steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint.

M&L for preparation of new untreated wood and wood base material of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

M &L for PCC 1:3:6 type C1 (using 20mm graded stone aggregate as in block for hold fast, copings, filling in frames or similar work and finished the surface with existing and including form work.

M&L for 40 mm thick PCC 1:2:4 type B-0 (12.50 mm grade aggregate) for DPC to horizontal or vertical surfaces including necessary form work

M&L for singhle filling in floor or paving, laid in layer n.exc 15 cm thick, spread, levelled and blinded with earth and rammed including watering

M&L 40mm thick for cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in floor finished even and smooth without using extra cement.

S&F glass dividing strip 3mm thick, 38mm wide

M&L RCC 1:2:4, type B-1, 20 mm draded aggregate as in lintels upto 1.5m clear span and lintel band, roof band ad other similar items including from work all as specified and directed.

Formwork for rough finished surfaces to edges of concrete flats, treads, breaks in floors windows cills, concrete railing, opening in concrete, walls floor and roofs n.exc 20 cm wide and sides of RCC/PCC bands in wall) horizontal or slopings and similars etc complete all as specified and directed.

M&L for mild steel TMT bars 5mm dia and over upto 10mm dia, cut to length bent to shape required incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire annealed, not less than 0.90mm dia or securing with clips quality as in stirrups, spacers and binders all as directed by Engineer in Charge.

Taing down loose/ damage/ breakage concrete of any discription from reinforced cement concrete columns, bracing, wall, beams etc by hammering with wooden matllets carefully without damaging existing serviceable structure, chipping old concrete for receiving plastering etc of RCC overhead reservoir upto 7.5m height form GL and disposal of debris and rubish form M.D. permises all as specified and directed.

All as per item No 90 above height exc 7.5m and n.exc 15m

Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc upto 7.5m height from GL and disposal of debris and rubish from premises.

All as per item No 92 above height exc 7.5m and n.exc 15m

Cleaning the existing surface of concrete and romoving rust particle from existing exposed reinforcement of any dia meter by scraping with wire brush/ emery paper or by grinding in certain portion of RCC overhead reserviur (i.e. Column, bracing etc) upto 7.5m complete all specified and directed.

All as per item No 94 above hight exc 7.5m and n.exc 15m

M&L TMT bar for 10mm dia and over cut to length bent ot shape require including cranking, bending etc and lapping/ welding as directed to the existing one upto 7.5m height complete all as specified and as directed.

All as per item No 96 above hight exc 7.5m and n.exc 15m

M&L cement modified grout admixed with "LATEX PLUS" (or equivalent in M/s Fosroc/ M/s Pedilite) @ 50 gms per Kg of cement and "WONDER GROUT" (or equivalent in M/s Fosroc/ M/s Pedilite) polymer adhesive 1.5% by weight of cement and injecting through prefixed aluminium nozzle by pressure grout machines including fixing/ sealing 12.5 mm dia (bore) aluminium nozzle upto depth of 50 mm from column outer surface and exposing 50 mm from finished outer surfaces of concrete column with temporary sealing to avoid blocking of holes in nozzle mouth all as per manufacturer's instructions and as directed by GE/ Engineer in Charge upto 7.5m height (Note: Rates for 12.5 mm bore Alumimium nozzle shall be included).

All as per item No 98 above hight exc 7.5m and n.exc 15m

Apply two coats of "Anti corrosive protective coating (Corrogurd-ZN) (or equivalent in M/s Fosroc/ M/s Pediligte) as per manufacture prited instructions for corrosion protection on expose surface old and new steel reinforcement upto 7.50 mtr height from ground level complete all as specified and directed.

All as per item No 100 above hight exc 7.5m and n.exc 15m

Chipping out existing internal surfaces (RCC wall, beam, slab etc) of RCC over head tank cleaning/ washing the surface with water thoroughly then appply diluted cement modified grout (diluted latex (1.6) on roughened and cleaned surfaces to sealing the porosity/ and minor cracks in existing surfaces (RCC wall, beam, slabs etc) at any height complete all as specified and as directed (Note: Application and consumption of 'SHALI SBR LATEX or equivalent" shall be as per manufaturer's instructions)

M&L for cement concrate (1:1 1/2 : 3) with using 12.5mm and down draded crushed stone ships mixed with Wonder Latex SP (i.e Superplasticlsers concrete adminture) at any height of tank in beam, column, bracings, wall, inside and outside including necessary form work upto 7.5m height all as specified and as directed.

All as per item No 103 above hight exc 7.5m and n.exc 15m

M&L plastering 10mm thick in Cm (1:3) mixed with "CONPLAST x 421 IC" (Plastering liquid water proofer) (or equivalent in M/s Dr Fixit/ M/s Scoot guard) upto 7.5m height complete all as specified and as directed. (Note : Proporation of mix and method of mixing of "CONPLST X 421 IC" shall be as per manufacturer's printed instructiona).

All as per item No 105 above hight exc 7.5m and n.exc 15m

M&L for preparation of newly plastered surfaces of RCC braces, columns, wall etc and applying two coats of weater coat paint over a coat of primer all as specified and as directed, at any height.

M&L for preparation of old concrete surfaces of braces, columns, wall and bottom of dome, etc and applying two coats of weater coat paint over a coat of primer including removing of existing paint all as specified and as directed, at any height.

M&L for preparation of old steel surfaces n.exe 10cm width or girth and applying one coats of synthetic enamel paint coat complete all as directed, at any height.

All as per item No 109 but over 10cm width or girth, at any height

M&L for applying one coat of eppoxy primer (shalipoxyHBE or equivalent @250gms/ Sqm al as per manufacturer instruction for internal surfaces of old and new concrete/ plastered surfaces inside te tank at any height from the ground level all as specified and directed.

M&L for applying two coats of food grade, moistuere and chemical resistance Epoxy Coating (Shalipoxy FC @ 300gms/ Sqm al as per manufacturer instruction for internal surfaces of old and new concrete/ plastered surfaces inside te tank at any height from the ground level all as specified and directed.

S&F Sheet Metal enclosure( IP-43) for SPN DBs,02Ways, Single Door, suitable for mounting DP MCB as incomer & SP MCBs as outgoings, built- in bus bars complete suitable for 240 Volts, AC, 50 Hz supply, and fixed in recess in brick masonary wall all as specified and as directed

Supply and fixing Green line smart lumiaire of 40 watt LED street light luminaires with highly efficient lighting in & including mounting bracket made out of GE pipe light grade 32-40mm bore not less than 01 mtr long duly fixed with wall with fixing arrangement such as clamps, nuts, bolts complete all as specified and directed by the Engr in charge make: Crompton, cat Part NoLSTS-40-CDL or equivalent as approved by GE

M/S MANA ENTERPRISE