SPECIAL REPAIRS TO QTR NO. 01 TO 05 IN BLDG NO. T-04 (OR GOVT MD ACCN) AT RA LINE OF CAFVD UNDER GE (CENTRAL) KHADKI.

Amount

Dismantling Single or double layer Mangalore pattern or similar tiles on ridge/roofing complete all as specified and as directed.

Supply and fix pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as as specified and as directed.

Supply and fix pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complate all as specified and as directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles and removing the debris outside the defence land complete all as specified and as directed.

Material and labour brick work with fly ash old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 in any position, complete all as specified and as directed.

Material and labour for 15mm thick rendering on fair faces of concrete surfaces in CM 1:6 finishing even and smooth without using extra cement complete all as specified.

Dismantaling timber in scantling 40 sq.cm and over in section in any position and any description unframed wk or unframed work.

Dismantaling battens for tiles, singles etc of any size including tiling fillets spaced exc.15 cm complete all as specified and as directed.

Dismantling timber scantlings in fillets, rails, posts, rafters, purlins etc under 40 sq. cm in section (Unframed work) in any position complete all as specified and as directed.

Supply and fix for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410 -W (Gde-E- 250) quality-A etc complete all as specified and as directed.

Supply and fix in repair E-board 'Everest' make 600x600x4mm thick white prelaminated sett embosed reinforced designer ceiling board tiles of approved texture at all height laid on Hot dipped Galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centers securely fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers of GI wire 4mm dia to be fixed by approved rawl plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall. Flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runners at 600mm center to form 1200x600mm modules cross tee longer than 600mm to be supported independently. 600x600mm modules to be formed by fitting 600mm long cross Tee centrally between the 1200mm cross tee. Tee, Perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacture instruction, including taking down old/ existing ceiling boards any type (fibre, pulp insulation etc) or inslutation boards any thickness incl fillets complete all as directed.

Taking down chowkhat or frame n. exc 1.5 Sqm each but with shutter (without taking off shutter from the frame) complete all as specified and as directed.

Taking down chowkhat or frame exc. 1.5 Sqm but n. exc 4 Sqm each but with shutter (without taking off shutter from the frame) complete all as specified and as directed.

Supply and fix aluminium powder coated window sliding type (3 track) with frame size 100x35x1.2mm thick and shutter frame size 39.40x17.70x1.2mm thick with and including two glass shutter and one mesh shutter including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws with and including 4mm thick tinted float glass and 0.36mm dia apperture 1.4mm SS wire mesh and fittings etc complete all as specified and as directed.

Supply and fix for 30mm thick flush shutter, solid core construction, with block board core plywood face panels, commercial type on both sides, chemically treated against termite infestation, complete all as specified and as directed.

Supply and fix for 35mm thick 2nd class HW glazed and skelton shutter, wire mesh, open rebated and prepared to receive glass, gauze, etc. (without sach bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge, etc size of shutters including wire mesh as specified in SSR-I, complete all as specified and as directed.

Supply and fix factory made solid PVC door frame of size 50mm x 47mm single revated made out of extruded 5mm plain colour PVC sheet reinforced with M.S. Square tube etc complete all as specified and as directed.

Supply and fix Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame etc complete all as specified and as directed.

Material and labourfor Non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm over & including 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and poited in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and as directed.

Material and labourfor Non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm over & including 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and poited in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and as directed.

Material and labourfor Glazed coloured ceramic tiles External/Internal in vertical surface 300mm x 450mm x 7mm/300mmx600mmx7mm thick over & including 10mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and directed.

Material and labour for Non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm over & including 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and poited in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and as directed.

Description all as per Ser item No 19, 20 and 22 above but in skirting and dado laid over and incl 10mm thick rendering in CM 1:4 and pointing including dismantiling and removing the debris outside the defence land complete all as specified and as directed.

Material and labour for cement concrete 25mm thick type B-0, 1:2:4 (12.5mm graded aggregate) as in flooring complete all as specified and as directed.

Material and labour machine cut cudappah stone slab 20-25mm thick over and including 15mm thick cement screed base in CM(1:6), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and rounding to edge including dismantling existing floor of any type complete all as specified and as directed.

Material and labour for Granite 20mm thick work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms, vertical surface of wall also and like in 12mm thick screed bed or bedding layer cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including polishin, grinding, moulding, dismantling and removing the debris outside the defence land complete all as specified and as directed.

Supply and fix Butt hinges, 150mm long, extruded aluminium alloy with galvanised mild steel hinge pin, complete all as specified and as directed.

Supply and fix Extruded brass handles, fabricated type polished 150mm long fixing with screws etc complete all as specified and as directed.

Supply and fix Aluminium anodised , barrel tower bolt 200mm long, powder coated of extruded section and fixed complete all as specified and as directed.

Supply and fix Aluminium alloy, anodised, sliding door bolt 250mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy 12mm dia, complete all as specified and as directed.

Material and labour for 15mm thick Rendering on brick /concrete or dubbed surface in CM 1:4 with water profing compound finishing even & smooth without using extra cement and similar like at any height including necessary scaffolding , ladder & formwork including taking down cement plaster, raking out joints, hacking for key & scrubbing down with water and removing the debris outside defence land complete all as specified and as directed. NOTE :- Water proofing compound shall be measured & paid separetely

Material and labour for 15mm thick Rendering on brick /concrete or dubbed surface in CM 1:6 with finishing even & smooth without using extra cement and similar like at any height including necessary scaffolding , ladder & formwork including taking down cement plaster, raking out joints, hacking for key & scrubbing down with water and removing the debris outside defence land complete all as specified and as directed.

Material and labour for preparation of new or previously untreated wooden surface of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and a directed.

Material and labour for preparation of new or previously untreated steel surface of any description over 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Material and labour for preparing new plastered surface of walls and applying two coat of cement base paint oaver a coat of primer at any height including necessary scaffolding ladder etc complete all as specified and as directed.

Material and labour for preparing new plastered surface of walls and applying two coat of oil bond distemper of alkali resistant primer at any height including necessary scaffolding ladder etc complete all as specified and as directed.

Material and labour for complete removal of existing treatement/old plastered/concrete surface from internal surface of wall by wire brushes and applying 2mm thick of Birla/JK wall care putty to obtain smooth regular/even finish using sand paper and applying two coat of oil bound distemper emulsion over a coat of alikali resistance primer upto height 10 mtr etc complete all as specified and as directed.

Supply and fix 15mm bore tubes, 'medium grade' galvanised, with all fitting and fixed complete to wall and ceiling or laid in floors including necessary cutting chasing into wall/concelled including taking down old steel tubing etc complete all as specified and as directed.

Supply and fix 20mm bore tubes, 'medium grade' galvanised, with all fitting and fixed complete to wall and ceiling or laid in floors including necessary cutting chasing into wall/concelled including taking down old steel tubing etc complete all as specified and as directed.

Supply and fix in repairs for Chromium plated brass angle valve for 15mm bore pipe, fixed complete all as specified and as directed.

Supply and fix in repairs bib tap, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm bore complete all as specified and as directed.

Supply and fix in repair stop valves cast copper alloy CP fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15mm bore dia all as specified and directed.

Supply and fix in repairs for PVC connection 15mm dia and 45cm long with 2 Nos PTMT nuts, fixed complete all as specified and as directed.

Supply and fix in repairs for fancy pillar taps, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed for 15mm bore etc complete all as specified and as directed.

Supply and fix in repairs for vitreous china wash basin, white, flat back size 550x400 excluding taps, waste chain and plug and porecelain stopper but including bracket any size and waste coupling of PTMT, including cutting for and pinning in ends of bracket or erecting stand execlusive of fixing of supply and waste pipe etc fixed complete all as specified and as directed.

Supply and fix in repair Rotational moulded polythylene water storage tanks 1000 liters capacity (three layered), ISI marked cylindrical vertical with closed top including 3 Nos GI check nuts and tank nipple of 20mm bore for inlet and outlet, 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed.

Supply and fix in repair Sinks made of stainless steel 1mm thick, kitchen or laboratory with plugs, washers and waste ; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x355mm x165mm complete all as specified and as directed.

Supply and fix in repair for vitreous china squatting pan, orissa pattern, size 580 x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) including 'P' or 'S' trap & PVC flushing bend fixed complete all as specified and as directed.

Supply and fix in repairs for 75mm bore PVC (SWR) pipe single socket in any length with rubber ring joints, laid in trenches, wall, floors or laid in sunken floor etc complete all as specified and as directed.

Supply and fix for 75mm bore PVC bends, branch piece or similar fitting are reqd to make the system functional complete all as specified and as direced.

Supply and fix for PVC floor trap 75mm complete all as specified and as directed.

Supply and fix in repair for 110mm bore PVC (SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors or fixed on wall etc complete all as specified and as directed.

Supply and fix in repair for 110mm bore PVC (SWR) bends, branch piece or similar fitting are required to make the system functional complete all as specified and as directed.

Supply and fix for 110mm bore PVC (SWR) junction single, (Single T), equal or unequal fitting as reqd to make the system functional complete all as specified and as directed.

Demolition of (reinforced) cement concrete of any description and in any position and thickness all as specified and as directed (Reinforcement cut as to facilitate demolition).

Material and labour for RCC Nominal mix Type B0 (1:2:4) (using 20mm graded agg) as Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the lik concrete etc complete all as specified and as directed.

Material and labour for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.

Supply and fix for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Description all as per sr item 59 above but 5 mm dia and over up to and including 10mm dia in stirrups, spacers and binders all as specified and directed.

Supply and fix for mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

Supply and fix Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

Supply and fix in repair Harrison rails, anodised aluminium alloy with fixing brackets, stops, rollers etc complete all as specified and as directed.

Supply and fix in repair for sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and as directed.

Supply and fix in repair stainless steel Soap dish, any type and size, fixed to plugs with chromium plated brass screws complete all as specified and directed by Engr-in-Charge.

Supply and fix in repairs for PVC valveness, symphonic action type, flushing cistern 10 liters capacity, low level, white with inlet ball valve, float and handle including brackets complete all as specified and as directed.

Supply and fix in repairs for PVC waste pipe 32mm dia, complete with 80cm long flexible for WHB/Urinals fixed complete all as specified and as directed.

Taking down copper/aluminium point wiring ( light, fan, socket, power ) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately ) and making good disturbed surface of walls, floors, etc all as specified and as directed.

Material and labour Point wiring (concealed) complete with 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLSH cable 1100 Volts grade drawn through and including PVC heavy duty conduit (minimum 20 mm dia external) but shall be increased as per actual site requirement in accordance with clause 19.125 of SSR part- I ISI marked including conduit accessories like bends, tees, junction boxes etc fixed concealed in wall or ceiling etc including 1.5 sqmm PVC insulated but unsheathed multistranded copper conductor FRLSH cable as earth continuity wire including modular metal flush box with white/coloured top cover plate and frame of required modules for mounting of modular switches, sockets, bell push and fan regulators etc complete all as specified and as directed. (a) One Light point /Fan/Ex Fan/Bell point controlled by one switch

Description all as per item No 69 above but, for one 3/5 pin socket outlet 5/6 Amps on the same board with other switches with cable of size 1.5 Sqmm nominal area.

Description all as per item No 69 above but for one 3/5 pin socket outlet 5/6 Amps independent board with cable 1.5 Sqmm nominal area.

Description all as per item No 69 above but for one 3/6 pin socket outlet 15 Amps on independent board with cable FRLSH 2.5 Sqmm nominal area.

Material and labour for submain wiring with two single core PVC insulated sheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 4.0 sqmm (Nominal area) drawn through in and including PVC conduit with all fittings and accessories as required at site alongwith one single core green colour PVC insulated sheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 4.0 sqmm as earth lead and connected to earth dolly and making good to disturbed surfaces all as specified and directed. NOTE :- (a) Two run of cable with one run of earth wire and one run of casing capping/conduit will be measured as one length.

Supply and fix modular switch 1 way, 5/6 Amps, 1 module (ISI marked) complete all as specified and as directed.

Supply and fix modular Bell push, 5/6 Amps, 1/2 module (ISI marked) complete all as specified and as directed. MAKE :- Legrand or techno commercial equivalent of Crabtree(Athena)/, Havells(Oro)

Supply and fix modular socket, 5/6 Amps, multi pin (ISI marked) complete all as specified and as directed. MAKE :- Legrand or techno commercial equivalent of Crabtree(Athena)/, Havells(Oro)

Supply and fix modular switch 1 way, 16 Amps, 1 module (ISI marked) complete all as specified and as directed. MAKE :- Legrand or techno commercial equivalent of Crabtree(Athena)/, Havells(Oro)

Supply and fix modular socket, 6/16 Amps, multi pin (ISI marked).complete all as specified and directed. MAKE :- Legrand or techno commercial equivalent of Crabtree(Athena)/, Havells(Oro)

Supply and fix bell, AC 230 V, single pole complete all as specified and directed.

Supply and fix modular type fan regulator 120 Watt, 2 module complete all as specified and directed. MAKE :- Legrand or techno commercial equivalent of Crabtree(Athena)/, Havells(Oro)

Supply and fixSheet metal Enclosure SPN 08 way (MCB DB) Double door, 240 Volts AC all as specified and as directed. MAKE :- Schneider /ABB/Legrand or eqvt

Supply and fix MCB DB double door 4 way ETPN with 200 Amps rated bus bar 240 volts all as specified and as directed.

Supply and fix MCB TPN 40-63 Amps, 415 volt 10 KA

Supply and fix MCB, SPN (Double Pole) 32 amps, 240 Volts, 10 KA ‘’C” curve all as specified and as directed. MAKE :- Schneider / Legrand/ABB or eqvt

Supply and fix MCB, Single Pole, 6 to 32 amps, 240 Volts, 10 KA breaking cap, ‘’C” curve all as specified and as directed. MAKE :- Schneider / Legrand/ABB or eqvt.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixLED lamp 12 watt, CDL, E-27 230V, PF-0.95 (min) all as specified and as directed. MAKE :- CG or equivalent to HPL/Havells/ Philips

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. NOTE :- Old UNSV ceiling fan deposit to MES store

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and as directed.

Supply and fix fancy type chromium plated bib cock 15 mm bore screwed both ends for concealed pipes or union or or fittings all as specified and directed.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for laying of Cable/pipe and getting out in soft loose soil complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick complete all as specified and directed.

Removing of excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed by Engr in Charge .

Material and labour for fixing or passing through pipe, laid in trenches or fixed to pole/wall or fixed to LT panel board, XLPE insulated, armoured, heavy duty electric cable with aluminium stranded conductor, 1100 volts grade, heavy duty cable served with inner sheathing of PVC tape, armoured with galvanised steel wire or tape and overall PVC sheathed 35 sq.mm 3.5 core complete all as specified and as directed. MAKE :- KEI/Havells/Finolex

Supply and lay double wall corrugated (DWC) high density polythene pipes having corrugation on the outer wall and plain surface on the inner wall confirming to IS 16205 & IS14930 ( Part I and II) for protection of underground cable of size 40 mm outer dia with all fittings such as clamps. coupler etc laid in trenches / road/ nallah or fixed along wall. poles or laid under floor (including cutting floor/Road and making good to match with existing adjoining surface etc for cable protection all as specified and as directed. (excavation and earth work shall be measured and paid separately) MAKE :- Alcorr/ Rex/Gemini or its equivalent

Material and labour for Cutting/Chasing and making hole on wall for fixing of exhaust fan of sweep 250 mm and making good to disturbed surfaces as directed.

Supply and fix exhaust fan metal body light duty 300 mm sweep 230 volt AC complete with frame and Louvers incl Mmaking of suitable hole in brick / stone wall for fixing of Exhust Fan complete all as directed. MAKE :- Havells/Almonard/ Crompton Greves or eqvt. NOTE :- Old UNSV Exhaust fan deposit to MES store

Supply and fix exhaust fan 250 mm sweep made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250 mm incl making of suitable hole in brick / stone wall for fixing of Exhust Fan complete all as directed. NOTE :- Old UNSV Exhaust fan deposit to MES store

Material and labour for PVC insulated, PVC sheathed twin core 1100 volts grade, 04 sqmm aluminium stranded conductor (incl PVC conduit/wire guard where required) complete all as specified and directed. MAKE :- Havells/ Finolex

Material and labour for Earthing complete with galvanised steel pipe electrode, 40 mm bore, medium grade, 3 mtr long buried directly and vertically in ground with top edge at ground level after making bore hole of size not less than 300 mm dia and 3.0 Mtr long using suitable mechanical drilling rig (for drilling near the specified bldg), connected with galvanised steel earthing lead of 4mm dia all as shown in Plate No-2, connected to the earthing test point, concrete pit in PCC 1:3:6 type C-2with RCC precast pit cover slab 400mmx400mmx80mm with handle for lifting made out of 8mm dia MS rod, funnel, wiremesh, 15 mm dia light grade GI tubing for protection of GI wire 4mm dia, charcoal and salt in alternate 150mm thick layers around GI earth pipe, including necessary returning filling in & removal all as specified or indicated in SSR Part-I, including testing to achieve earth resistance value as per IS specification on completion.

Material and labour for laying in trenches/fixed to wall galvanised steel water tubing 50 mm bore, medium grade with and including all medium grade fittings complete all as specified and as directed.

Material and labour for laying in trenches/fixed to wall galvanised steel water tubing 40 mm bore, medium grade with and including all medium grade fittings complete all as specified and as directed.

Material and labour for laying in trenches/fixed to wall galvanised steel water tubing 25 mm bore, medium grade with and including all medium grade fittings complete all as specified and as directed.

Material and labour for Cutting existing GI/CI/ pipes in position for insertion of fittings, mechanical joints etc for bore of pipe any type complete all as specified and as directed.

Supply and fix in replacement stop valve 25mm dia complete all as specified and as directed.

MANIYA CONSTRUCTION CO (BID ID -3325130)

SAMBHAJI D JARANDE (BID ID -3334103)

M/S JAYCONSTRUCTION CO (BID ID -3325031)

MAHESH DADAJI BACHHAV (BID ID -3333466)

ShreHari Civil Enginneering and Contractors (BID ID -3324857)

M/s Samta Engineers (BID ID -3324743)