REPAIRS TO PLASTERING FLOORING CONNECTING PATHS STAIR CASE AND OTHER MISC WORKS IN THE AREA OF AE B/R-I UNDER GE (WEST) JABALPUR

Amount

Taking down cement plaster on brick/ stone masonary including raking out joints, hacking for scrubbing down with water etc. complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed..

M&L for brick work with sub class ‘B’ brick, straight or curved on plan exc 6 m mean radius built in CM 1:6 complete complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick thick walls with old size bricks built in cement mortar 1:4 complete all as specified and as directed.

M&L for 5mm thick cement plaster in cement mortar 1:3 as on ceiling, soffits of RCC shelves, surfaces finished even and smooth without using extra cement complete etc all as specified and as directed.

M&L for 15mm thick rendering in cement mortar (1:4) with WPC on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed (WPC shall be measured seperately).

M&L for 15mm thick rendering in cement mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for Preparation of newly plastered surfaces of walls and applying two coats of oil emulsion distemper over a coat of primer complete all as specified.

Prepration of newly plastered surfaces of ceiling and applying three coat of white wash on ceiling etc all as specified.

M&L for Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over priming surface complete etc all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for non skid ceramic coloured joint free tiles 7 to 8 mm thick area of each tile exceedeing 0.18 sqm but n.exc 0.38 sqm (600x600), in floors, set and jointed in neat cement slurry and pointed in white cement laid over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L for non skid ceramic coloured joint free tiles 7 to 8 mm thick area of each tile exceedeing 0.18 sqm but n.exc 0.38 sqm (600x600), as in vertical surfaces such as skirting / dado set and jointed in neat cement slurry and pointed in white cement fixed over and including 10 mm thick backing coat in CM (1:4) complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed.

Material and labour for Glazed ceramic tiles of size 350x 250x 7mm/ 450X 350X 7mm thick in vertical surfaces such as dado/ skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for Vitrified ceramic tiles 10mm thick LIGHT SHADE(square/rectangular) polished area of each tiles not exceeding 0.36 sqm laid over and including 15mm thick screed bedding layer in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile complete all as specified.

M&Lfor machine cut kota stone slab flooring 20-25mm thick laid over and including cement Screed bed or bedding layer of mortar 20 mm thick as in floor finishes in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing etc complete all as specified and directed.

M&L for machine cut kota stone slab 20-25mm thick as in riser of steps, skirting, dado and pillar fixed over 10mm thick cement plaster in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed.

Demolition of cement concrete in ground floor & paving n. exc 15 cm thick (below or above GL) unreinforced complete all as specified and all as directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in floor finishes 40 mm thick laid in panels & finished even and smooth without using extra cement complete all as specified and directed.

M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate, 75mm thick in plinth protection laid in panels and finished even and smooth without using extra cement including necessary form work complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) in lintels upto 1.5 clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers ,apex stones, bed plates, water troughs and the like including use of formwork (straight or curved) ,including weathering, slightly rounded or chamfered angles and throating, all as specified and as directed (Note :-reinforcement where provided shall be measured and paid seprately) complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid dry and pointed complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed.

M&L for 75 mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded stone agg as in sub base finishing the surface even and rough to receive floor finishes complete all as specified and directed.

M&L for sand cushion 50mm thick and well ramming including watering as required complete all as specified and directed.

M&L for 60 mm thick Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment, confirming to IS 15658-2006of M 35 Grade complete all as specified and as directed.

M&L for coloured cement concrete chequered tiles 250x250x22 mm thick with grey cement and no pigment, set and jointed in neat cement slurry and pointed in coloured cement to match as in floors including 15mm thick screed bed to floor finishes in cm 1:4 complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc. 1.5 sq.m but not exc. 4 sq.m each complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specifications complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site complete all as specified and directed.

S&F second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F 35mm thick second class hard wood factory made panelled door shutters (any number of pannels) with panels of timber flat on both sides (feather edged) or of veneeved particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkats complete all as specified and directed.

S&F 35mm thick second class hard wood factory made glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc divided into squars with plain chamfered or rounded mitred and rebated sash bars any numbers and fitted to chowkats as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and directed.

S&F factory made steel windows with side hung shutter including box type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded confirming to Fe 290 Gde E-165applying etc omplete all as specified and directed.

S&F factory made steel windows with side hung shutter including box type hinges with steel handle and steel peg stay, complete without glazing bars, confirming to Fe 290 Gde E-165 etc complete all as specified and directed.

S&F factory made steel windows or ventilators with top hung shutter including hinges, steel peg stay, glazing bars confirming to Fe 290 Gde E-165 etc all as specified and directed

S&F mild steel framed work such as grills, gratings, etc. with ends of bars, shouldered and/or riveted, or forged into spikes, framed guard bars etc and similar work conforming to Fe-290 (Gde-E-165) complete all as specified and directed

S&F 100mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin,Type-B-21 complete all as specified and directed.

S&F butt hinges, medium weight, cold rolled, mild steel of size 100 mm complete all as specified and directed.

S&F extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed.

S&F extruded aluminium alloy handles, fabricated type, anodised of size 100 mm complete all as specified and directed.

S&F mild steel pressed handles oval type stove enameled black of size 150mm complete all as specified and directed by Engr-in-Charge.

S&F mild steel pressed handles oval type stove enameled black of size 100mm complete all as specified and directed by Engr-in-Charge.

S&F aluminium anodised, barrel tower bolts of extruded section with length of bolt 150 mm and fixed complete all as specified and directed.

S&F aluminium anodised, barrel tower bolts of extruded section with length of bolt 100 mm and fixed complete all as specified and directed.

S&F mild steel barrel tower bolts stove enameled with bright bolt length of bolt 150mm –ISI marked and fixed complete all as specified and directed.

S&F aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy with length of bolt 300mm and fixed complete all as specified and directed.

S&F mild steel sliding door bolts 300mm length, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

M&L for Cutting holes in brick walls in exc half brick and nexc one brick in cement in mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

M&L for two coat of synthetic enamel paint over new wooden surfaces of any description not otherwise described over 10cm in width or grith over one coat of pink primer including preparation of surfaces complete.

M&L for two coat of syntetic enamel paint over new steel surface of any description over 10cm in width or grith not otherwise described over one coat red oxide primer including preparation of surfaces complete.

M&L for 3mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc. 0.5 sq.m in each pane complete all as specified and directed.

Supply and fixing 3 mm thick, figured glass ,pin headed type and glazing with oil putty in square n exc 0.5 sq.m each pane complete all as specified and as directed.

S&F in repair, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames glazed with putty or fixed with beads and supply and fix new sheet glass ordinary quality 3 mm thick in square n exc 0.50 Sqm each pane glazing with oil putty, clip in metal frame and wooden beading in wooden frame complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames glazed with putty or fixed with beads and supply and fix new sheet glass ordinary quality 4.8 mm thick in square exc 0.50 Sqm each pane glazing with oil putty, clip in metal frame and wooden beading in wooden frame complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc. conforming Fe-410W(GdeE-250) quality B complete all as specified and directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming Fe-410W(GdeE-250) quality B complete all as specified and directed.

S&F Stairs (framed) including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets, etc. complete conforming to Fe-410W(GdeE-250) quality B complete all as specified and directed.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming Fe-410W(GdeE-250) quality B complete all as specified and directed.

S&F 1.25mm thick mild steel, plain, black sheet in heart covering to door shutters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required complete all as specified and directed.

Dismantling of Asbestos cement (corrugated , semicorrugated , etc.) sheets in roof coverings.

S&F 6mm thick asbestos cement corrugated or semi corrugated sheets in roof walls etc,fixed with L or J type hooks bolts complete

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strenth of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws etc all as specified and as directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strenth of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws all as specified and as directed.

S & F 0.63mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade zinc coating 275.

S & F 2 mm thick reinforced fiber glass translucent corrugated sheeting with two corrugation side lap fixed with L type 'J' type hook bolt.

Dismantling of wall and ceiling boards( fibre pulp insulation etc) any thickness including cover fillets all as specified and directed.

M&L for suspended false ceiling system using chicago metallic (E grid) exposed supended system, grid section size 600mm X 600mm comprising of GI powder coated Main Runner of dimensions 39 mm X 24mm X 0.8mm thick (thickness comprising of GI/0.4+ PPPCGS/0.3mm & weight of runner 1.35 kg for 3600mm length) Cross Tee of dimensions 29mm X24mmX0.8mm thick and thick wall angle 22.2mmX22.2mmX 0.65 mm thick ( thickness comprising of GI/0.35+ PPPCGS/0.3mm & weight of angle 0.70 kg for 3050mm length) with and including 4mm thick HPSC(High pressure steam cured) pre-primed , self embossed . textured designer board, water resistant termite resistant , fire resistant for insulation and acoustic purpose to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed with steel dash through fasteners from purlins of the roof with butterfly clips(Wt-0.007 Kg/clip)hold down clips (Wt-0.0035 Kg/clip) with Provn of light fixture complete all as specified and directed. Make :- ARMSTRONG AND EVEREST or other equivalent as approved.

S&F in repair steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 15mm bore of pipe complete all as specified and directed.

S&F in repair steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 20mm bore of pipe complete all as specified and directed.

S&F in repair steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 25mm bore of pipe complete all as specified and directed.

S&F in repair vitreous China squatting pan of pattern Orissa Pattern , size 580 x440 mm white with P or S trap , front or backinlet and integral foot rests any pattertn (excl flushing cistern and flush pipe) complete incl provn of lime concrete bedding connection to flush pipe , trap etc & making good complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (Padestal pattern) white excluding fixing bolts, flushing cistern and flush pipe with and incl 'P' or 'S' trap and making good to floor to match with existing all as specified and directed.

S&F in repairs vitreous China bowl urinal flat back of size 465x355x265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern flush pipe and waste pipe) including connections to flushing pipe and out going pipes etc complete all as specified and directed

S&F in repairs vitreous china wash basin white flat black of size 550x 400 mm (excluding taps), waste, chain and plug including brackets complete all as specified and directed

S&F in repair PVC 10 litres capacity valveless ,syphonic action type low level flushing cistern ,white including flush pipe, cantilever brackets ,inlet, ball valve, float and handle, PVC connection 15mm dia, 450mm long etc complete all as specified and directed.

S&F in repair 15 mm dia bib taps cast copper alloy with Chromium plated cruch or butterfly handle scrwed, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F repairs 15mm bore dia concealed/ angular stop valves chromium plated fancy type , screwed down , high pressure ,screwed both ends for iron pipe or for union and fixed complete all as specified and directed

S&F in repairs stop valves 15mm , cast copper alloy , fancy type chromium palted screwed down , high pressure , with crutch or butterfly handle , screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs pillar taps, brass, with capston heads, fancy type, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed in repair, complete all as specified and directed.

S & F in repair 15 mm bore brass chromium plated Wall Mixture three in one including Provn of OH shower fancy type screwed down to GI pipe with CP brass cup complete all as specified and directed.

S & F in repair 15 mm bore brass chromium plated Wash Basin Mixture for hot & cold water with long shank and fly nut complete all as specified and directed.

S&F in repairs Sink Mixer, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule fancy type chromium plated of 15 mm bore dia of pipe complete all as specified and directed. complete all as specified and all as directed.

S&F in repair staniless steel sink 1mm thick without drainage board for kitchen with plug , waste pipe , washers, including cantilever cast iron brackets , connecting union to waste pipe etc, overall size 495x420mm with bowl size 410x330x160mm complete all as specified and directed.

S&F in repairs stainless steel plate rack, 0.56mm thick of standard pattern, 31”x36” size including fixing to wall with 4 Nos 50mm long screws & PVC rawl plugs complete all as specified.

S&F in repair CP waste fittings brass chromium plated for sink 40mm dia with long screwed shanks and fly nuts , flange end bedded in red lead cement and other in fixed all as specified and directed.

S&F in repair CP waste fittings brass chromium plated for sink 32mm dia with long screwed shanks and fly nuts , flange end bedded in red lead cement and other in fixed all as specified and directed.

S & F in repairs Towel rail 600 mm long and 20 mm dia brass chromium plated D type fixed with screws and wooden or plastic cleats complete all as specified and directed.

S&F in repair, PVC Bath Cabinet made from hard thermosetting material with mirror, white/ivory colour, 400 x 500mm size. As per Cat No. 554 of Make Prayag or equivalent make etc complete all as specified and directed.

Supply only, Integral water proofing compound. Complete.

S&F in repairs 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including stack clamp etc complete all as specified and directed.

S&F in repairs 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints laid in trenches complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including stack clamp complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints laid in trenches complete all as specified and directed.

S&F in repairs 75mm bore PVC (SWR) bend, any radius with access door complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) bend, any radius with access door complete all as specified and directed.

S&F in repairs 19 mm thick Block boards, grade 2 quality, interior grade, decorative type with decorative face laminated veneer on one face and other side commercial face including 6mm thick 1st class HW lipping overall edges, fixed with GI nails etc complete all as specified and all as directed.

Roughening surfaces of old concrete floor/ terrace by picking incl. taking down existing detiorated / decayed tar felt PCC tiles or any type of treatment including loose surface, scraping with scraper, chiseling, scraping of surface with wire brush or any other method, sweeping clean & washing down with water to remove dust etc. complete all as specified and directed.

Removing building materials etc to a distance of 100M or under, beyond the lead incl in the rates including loading, unloading and stacking at the destination complete all as specified and directed.

Material and labour for cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in roof padding 50mm thick in average complete all as specified and directed. .

M&L for 10 mm thick screed bed or bedding layer in CM 1:3 mixed with water proofing compound @ 3 % by weight of cement on concrete roof surface finished fair and even to maintain the proper slope of roof surface etc complete all as specified and directed.

M&L for Providing water proofing treatment over cleaned roof surface with super thermo APP modified water proofing memberane comprising of the following for roofs complete all as specified and directed. (a) Cleaning of plastered roof surfaces and applying a coat of bitumen primer @ 0.30 kg/Sqm on top of dry surface of finished cement mortar plaster. (b) One coat of hot blown bitumen of grade 85/25 @ 1.2kg /sqm shall be applied over primed surfaces. (c) One layer of APP based polymeric water proofing membrane of weight not less than 3 kg/Sqm consisting 3mm thick reinforced with polyster non wove fabric shall be unrolled surfaces with lap of 100 mm and the over lap shall be sealed by flame. (d) Applying two coats of aluminum paint on top of membrane @ 0.10Kg/Sqm.

M&L for Bitumastic gola, with 80/25 bitumen and coarse sand mixture, 1:3 by weight, 8cmx8cm at the junction of roofing to vertical surfaces complete all as specified and directed.

M&L for Cutting grooves in brick wall,75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls and applying two coat of oil bound distemper over a coat of birla wall care putty over a coat of chalk whitining on walls complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls and applying one coat of oil bound distemper complete all as specified and directed.

M&L for one subsequent coat of oil bound distemper over a coat of the same provided under to above items

M&L for preparation of old decorated surfaces of walls and apply one coat of white wash complete all as specified and directed

M&L for preparation of old decorated surfaces of ceiling and apply one coat of white wash complete all as specified and directed

M&L for preparation of old painted surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted surfaces of steel of any description, over 10cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.

Preparation of old plastered or un-plastered surface and applying one coat of cement base paint on walls etc complete all as specified and directed.

M&L for applying one subsequent coat on one coat of cement base painting under to above items No 118

M&L for cutting or grinding surfaces of old kota stone flooring, skirting, dados etc with car-boredom stone by hand or grinding machine, dusting off the surfaces after grinding and finally washing the surface clean with oxalic acid solution and polishing with bees wax polish complete all as specified and directed.

Supply & fixing in repairs frame work for railing fixed to wall/ floor made with 50 mm/40mm/30mm stainless steel (202) pipe including cutting & necessary welding complete all as specified and directed.

S&F in repairs fabrication of pressed steel cupboard shutters using 1.00mm thick MS plain sheet and frame 1.25mm thick bent to shape incl two coats of synthetic enamel paint on its surface and two coats hammer toe finish on external surface alongwith locking arrangement mortice lock handle etc complete all as specified and directed.

Supply, laying in repair and jointing 100mm nominal bore dia HDPE double wall corrugated pipe as sewage line and other similar work in trenchless excavation to crossing the roads, paths etc., in any type of soil without disturbing top surface by means of manual or machines complete all as specified and directed.

B G PANDEY AND BROTHERS

KRD ASSOCIATE

M/S CENTRAL REFRIGERATION AND ELECTRICALS