Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.0 LAccepted-AOC | L1 | Accepted-AOC Lowest and reasonable | |
| 2 | L2₹9.2 L+₹21,405 (2.38%)Rejected-Finance | L2 | Rejected-Finance L2 | |
| 3 | L3₹9.9 L+₹90,665 (10.1%)Rejected-Finance | L3 | Rejected-Finance L3 | |
| 4 | L4₹10.0 L+₹1.0 L (11.1%)Rejected-Finance | L4 | Rejected-Finance L4 | |
| 5 | L5₹10.8 L+₹1.8 L (19.8%)Rejected-Finance | L5 | Rejected-Finance L5 |
Tender Value
₹14 L
EMD Value
₹28,000
Closing Date
15 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE JAIPUR
Military Engineer Services, HQ Commander Works Engineer, Kalyan Marg, Banipark, Jaipur-06
REPAIR TO CERTAIN BR ITEMS AND PERIODICAL SERVICES TO MD ACCN UNDER ZONE-I AREA OF GE JAIPUR AT JAIPUR MIL STN
2023_MES_633445_1
CWE/JPR/82291/E8
Open Tender
Civil Works
Item Rate
180 days
JAIPUR
Class E, Cat a(i)
8 documents required · 8 mandatory
₹500
GE JAIPUR
₹28,000
Yes
2 Feb 2024
19 Dec 2023
17 Jan 2024
19 Dec 2023
15 Jan 2024
2 Jan 2024
19 Dec 2023 - 1 Jan 2024
Amount
Taking down cement plaster on brick or stone or concrete surfaces of wall/ceiling etc, including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed
Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles etc. complete all as specified and directed
M&L for rendering (10 +5)mm thick in two layer on brick work, concrete surfaces or stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing of walls with CM (1:4) with WPC @3% of cement or all as per manufatucring Instruction and finishing the surface fair and even etc. complete all as specified and directed Note : WPC shall be measured and paid separetly.
Supply only integral water proofing compound
M&L for Rendering 10mm thick in CM 1:3 to fair face of brick works or concrete surfaces of ceiling and finishing the surface even and smooth without using extra cement. complete all as specified and directed.
M & L for rendering 10 mm thick in CM 1:6 on fair faces of brick work, concrete surfaces or stone masonry surfaces on walls with (Internal Surface) including finished even and smooth without using extra cement complete all as specified and directed.
M&L brick work with old size sub-class ‘B’ bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:6 for raising of height of drain, manhole / wall etc. complete all as specified and directed
M&L for prepration of old painted surfaces and applying one coat of white wash on ceilings etc. complete all as specified and directed
M&L for prepration of new plastered surfaces and applying two coat of white wash on ceileings surface of approved tint etc. complete all as specified and directed
M&L for prepration of old painted surfaces of walls (internal surfaces) including one coats of distemper (Oil emulsion) of approved tint etc. complete all as specified and directed
M&L for prepration of new plastered surfaces of walls (internal surface) including two coats of distemper (Oil emulsion) of approved tint complete all as specified and directed
M&L for prepration of old painted surfaces by manual or mechanical means incl scrapping, rubbing, cleaning etc. and one coat of white wash (externa surface of walls) etc. complete all as specified and directed
M&L for prepration of new plasterd surfaces and apply two coat of white wash (external surface of walls) etc. complete all as specified and directed
M&L for prepration of old painted surfaces by manual or mechanical means incl scrapping, rubbing, cleaning etc. and apply one coat of cement Base Paint (externa surface of walls) complete all as specified and directed. Note for all periodical works under subject work : (Note : All qty of paint required for work shall be brought by the contractor in sealed contrainer/packing as per manufacturer and got approved from Engr-in-Charge before starting the work)
M&L for prepration of new plasterd surfaces and apply two coat of cement Base Paint (external surface of walls) complete all as specified and directed.
M&L for prepration of old painted surfaces by manual or mechanical means incl scrapping, rubbing, cleaning etc. and apply one coat of water based premium acrylic smooth exterior emulsion of approved colour ( company dipo tinted) with anti algal properties as per manufacturer instruction on external surface of wall complete all as specified and directed.
M & L for obliterating old writing of any description, n exc 0.1 sq. m, with paint to match existing work etc, complete all as specified and directed by Engr-in-charge.
M & L for writing letters or figures (Block, Roman, Italic or Indian) n exc 30 cm high complete with all as specified and directed by Engr-in-charge.
Dismantling of PVC/ AC and cast iron (SWR) drain pipes upto 110 mm dia, jointed in cement mortar and taking out of trenches if required etc, complete all as specified and directed
S&F PVC (SWR) pipes in repair single socketed in any length with rubber ring joints fixed to walls, type type 'B' ISI marked of 75mm bore etc, complete all as specified and directed
S&F PVC (SWR) pipes in repair single socketed in any length with rubber ring joints fixed to walls, type type 'B' ISI marked of 110mm bore etc, complete all as specified and directed
S&F PVC (SWR) bends of any radius 75mm bore etc, complete all as specified and directed
S&F PVC (SWR) bends of any radius 110mm bore etc, complete all as specified and directed
Supply & Fixing, Repair of 110 mm (4") Rain Water / Soil Water Drainage Down take Pipes fixing done with Pipe Supporting Clamping System with Rain Water Bracket Set with Pipe Support Channel + U Bolt R/M System running vertically with wall distance 3": Pipe Support Clamping made of: 1. Rain Water Bracket for 110 mm (4") PVC Pipe with pipe support channel having Wall Distance 3" made of Low Carbon Hot Roll Gauge Corrected Oil Pickled & Drawn (HROP D) Steel (IS 1079 DD); with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result above 2000 hrs. 2. U bolt R/M are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 DD used as per MTC confirms to EN 10204 3.1. Material Qty. for one unit : 1. Rain Water Bracket Set with pipe support channel for 110 mm (4") PVC Pipe; Wall distance 3" - 1 Nos. ; 2. U Bolt R/M for 110 mm (4") PVC Pipe Dia. - 1 No.; and 3. Justi Khilla 2 1/2" Zn coated - 2 nos. Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in the Technical Drawing no.: TD/2022/01. Make: Shaivi or equivalent as approved by GE.
Supply & Fixing, Repair of 75 mm (3") Waste Water Drainage Down take Pipes fixing done with Pipe Supporting Clamping System with Mono Bracket + U Bolt R/M System running vertically with wall distance 3": Pipe Support Clamping made of: 1. Mono Bracket for 75 mm (3") PVC Pipe having Wall Distance 3" made of Low Carbon Hot Roll Gauge Corrected Oil Pickled & Drawn (HROP D) Steel (IS 1079 DD); with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result above 2000 hrs. 2. U bolt R/M are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 DD used as per MTC confirms to EN 10204 3.1. Material Qty. for one unit : 1. Mono Bracket for 75 mm (3") PVC Pipe; Wall distance 3" - 1 Nos. ; 2. U Bolt R/M for 75 mm (3") PVC Pipe Dia. - 1 No.; and 3. Justi Khilla 2 1/2" Zn coated - 2 nos. Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in the Technical Drawing no.: TD/2022/01. Make: Shaivi or equivalent as approved by GE.
J.J.ENGINEERING
M/S ROHIT CONSTRUCTION
MSR INFRATECH
ANKIT BUILDERS
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .