Reliable Communication and Data Acquisition System for 132 kV and above Network in Haryana

Amount

OPGW cable & Accessories

24 Fibre (DWSM) OPGW fibre optic cable

Installation Hardware set for above 24 Fibre OPGW Fibre Optic cabling including all cable fittings & accessories except Joint Box

Suspension Clamp Assembly for 24F OPGW

Tension assembly Dead End for 24F OPGW

Tension Fitting assembly for 24F OPGW including all accessories for joint box (splicing ) location

Tension Fitting assembly double tension pass through assembly for 24F OPGW

Tension fitting assembly on suspension tower for 24F OPGW including all accessories at joint box (splicing ) location

Vibration Damper for 24F OPGW

Down Lead Clamp Assembly for 24F OPGW

Joint Box (24 Fibre)

48 Fibre (DWSM) OPGW fibre optic cable

Installation Hardware set for above 48 Fibre OPGW Fibre Optic cabling including all cable fittings & accessories except Joint Box

Suspension Clamp Assembly for 48F OPGW

Tension assembly Dead End for 48F OPGW

Tension Fitting assembly for 48F OPGW including all accessories for joint box (splicing ) location

Tension Fitting assembly double tension pass through assembly for 48F OPGW

Tension fitting assembly on suspension tower for 48F OPGW including all accessories at joint box (splicing ) location

Vibration Damper for 48F OPGW

Down Lead Clamp Assembly for 48F OPGW

Joint Box (48 Fibre)

Supervision of stringing of 24 fibre OPGW during installation (50 kms) on under-construction transmission line

Splicing and installation of joint boxes

End to End testing of OPGW cable (installed)

FODP 48F: Indoor type, rack mounted with FCPC coupling and pigtails

FODP 96F: Indoor type, rack mounted with FCPC coupling and pigtails

Fibre Optic Approach Cable

24 Fibre (DWSM)

Installation Hardware set for above 24 Fibre, Fibre Optic Approach Cable

48 Fibre (DWSM)

Installation Hardware set for above 48 Fibre, Fibre Optic Approach Cable

AERIAL FO CABLE & ACCESSORIES

24F (DWSM) Aerial Fibre Optic Cable

Installation Hardware Set For Above 24 Aerial Fibre Optic Cabling Including All Cable Fittings & Accessories Except Joint Box

Joint box (24 fibres)

48F (DWSM) Aerial Fibre Optic Cable

Installation Hardware Set For Above 48 Aerial Fibre Optic Cabling Including All Cable Fittings & Accessories Except Joint Box

Joint box (48 fibres)

UGFO Cable & Accessories

Unarmored UGFO Cable (24 F DWSM)

GI Pipe 100mm (Nominal Bore) medium class (incl. access

Joint Box (24 Fibre)

RCC Hume pipe (NP3) 100mm dia (inside)

PLB HDPE pipe O.D 40mm

Survey & documentation

Excavation and Backfilling

Warning Tape

Unarmored UGFO Cable (48 F DWSM)

Joint Box (48 Fibre)

Installation of HDPE pipe by Trenchless digging

RCC Manholes (supply and installation)

for joint locations

for providing service loops at crossing

Brick walled manholes (supply and installation)

for joint locations

Installation of PLB HDPE pipe on wall in building premises including routing of OFC through it.

MANDATORY SPARES

OPGW cable & Accessories

24 Fibre (DWSM) OPGW fibre optic cable

Installation Hardware set for above 24 Fibre OPGW Fibre Optic cabling incl. all cable fittings & accessories except Joint Box

Suspension Clamp Assembly for 24F OPGW

Tension assembly Dead End for 24F OPGW

Tension Fitting assembly for 24F OPGW including all accessories for joint box (splicing ) location

Tension Fitting assembly double tension pass through assembly for 24F OPGW

Tension fitting assembly on suspension tower for 24F OPGW including all accessories at joint box (splicing ) location

Vibration Damper for 24F OPGW

Down Lead Clamp Assembly for 24F OPGW

Joint Box (24 Fibre)

48 Fibre (DWSM) OPGW fibre optic cable

Installation Hardware set for above 48 Fibre OPGW Fibre Optic cabling incl. all cable fittings & accessories except Joint Box

Suspension Clamp Assembly for 48F OPGW

Tension assembly Dead End for 48F OPGW

Tension Fitting assembly for 48F OPGW including all accessories for joint box (splicing ) location

Tension Fitting assembly double tension pass through assembly for 48F OPGW

Tension fitting assembly on suspension tower for 48F OPGW including all accessories at joint box (splicing ) location

Vibration Damper for 48F OPGW

Down Lead Clamp Assembly for 48F OPGW

Joint Box (48 Fibre)

Fibre Optic Approach Cable

24 Fibre (DWSM)

Installation Hardware set for above 24 Fibre, Fibre Optic Approach Cable

48 Fibre (DWSM)

Installation Hardware set for above 48 Fibre, Fibre Optic Approach Cable

AERIAL FO CABLE & ACCSSORIES

24F (DWSM) Aerial Fibre Optic Cable

Installation hardware set for above 24 aerial fibre optic cabling including all cable fittings & accessories except joint bax

Joint Box (24 Fibres)

Spares for UGFO Cables & Accessories

Unarmoured UGFO Cable (24 F DWSM)

GI Pipe 100mm (Nominal Bore) medium class (incl. access

Joint Box (24 Fibre)

RCC Hume pipe (NP3) 100mm dia (inside)

PLB HDPE pipe O.D 40mm

Deduct - Return of Existing Earth Wire on as is where is basis.***

Transmission Equipment (Total Scope)

SDH Equipment- (STM-16 MADM, upto 5 MSP protected directions)

Base Equipment (Common cards, Cross-connect/control cards, Optical base card, Power supply cards, power cabling, other hardware & accessories including sub-racks, patch cords, DDF etc. fully equipped excluding excluding optical cards and tributary cards).

Optical Cards

OLI to support minimum 150 km for STM-16

Tributary Cards

E1 Interface card (Min. 16 interfaces per card)

Ethernet interface 10/100 Mbps with Layer-2 switching (Min. 8 interfaces per card)

Gigabit Ethernet (Layer 2) interface (min. 2 nos.)

Termination Equipment

Drop & Insert Multiplexer

Base Equipment (Common cards, Power supply cards, power cabling, other hardware & accessories including sub-racks, etc. fully equipped excluding subscriber line interface cards

Subscriber Line Interface Cards

2 wire (sub/sub) voice channel cards (min 8 channels per card)

2 wire (sub/Exch) voice channel cards (min 8 channels per card)

4 wire (E&M) voice channel cards (min 8 channels per card)

Asynchronous Sub Channels data cards(V.24A/,28) , minimum 4 channels per card

Synchronous data cards(N*64 kbps) minimum 4 channels per card

Digital Access Cross Connect Switch (DACS)

16 × 16 ports switching matrix, fully equipment for minimum 16 E-1 ports

Equipment Cabinet

For SDH Equipment, Drop/Insert MUX Equipments

NMS - Main Control Centre

Craft Terminal

Hardware

Software

Network Manager & Element Manager System

Hardware

Software

Printer (Laser Jet)

NMS - Back up Control Centre

Craft Terminal

Hardware

Software

Network Manager & Element Manager System

Hardware

Software

Printer (Laser Jet)

Remote Workstation

Hardware

Software

Main Distribution Frame {200 pairs)

Synchronization Equipment

GPS clock including ail hardware and accessories

Test Equipment for SDH & MUX

SDH Analyser with Jitter and Wander Options

Handheld 2Mbps BER Tester

Ethernet Tester (with dual port, 10/100 ports Mbps Ethernet option, layer-1 & layer-2 functionality)

Mandatory Spares

Transmission Equipment (Total Scope)

SDH Equipment- (STM-16 MADM, upto 5 MSP protected directions)

Base Equipment (Common cards, Cross-connect/control cards, Optical base card, Power supply cards, power cabling, other hardware & accessories including sub-racks, patch cords, DDF etc. fully equipped excluding optical cards and tributary cards)

Optical Cards

OLI to support minimum 150 km

Tributary Cards

E1 Interface card (Min. 16 interfaces per card)

Ethernet interface 10/100 Mbps with Layer-2 switching (Min. 8 interfaces per card)

Gigabit Ethernet (Layer 2) interface (min. 2 nos.)

Termination Equipment

Drop & Insert Multiplexer

Common cards, Power supply cards, power cabling, other hardware & accessories including sub-racks, etc. fully equipped excluding subscriber line interface cards

Subscriber Line Interface Cards

2 wire (sub/sub) voice channel cards (min 8 channels per card)

2 wire (sub/Exch) voice channel cards (min 8 channels per card)

4 wire (E&M) voice channel cards (min 8 channels per card)

Asynchronous Sub Channels data cards(V.24A/,28) , minimum 4 channels per card

Synchronous data cards(N*64 kbps) minimum 4 channels per card

Digital Access Cross Connect Switch (DACS)

16 × 16 ports switching matrix, fully equipment for minimum 16 E-1 ports

Pre connectorized optical fibre patchcords (10 mtrs) - pack of 6 patch cords

Main Equipments

48V DC Power Supply (DCPS) system based on SMPS (for 15A rating)

Battery bank for above DCPS (200 AH)

48V DC Power Supply (DCPS) system based on SMPS (for 25A rating)

Battery bank for above DCPS (300 AH)

48V DC Power Supply (DCPS) system based on SMPS (for 35A rating)

Battery bank for above DCPS (400 AH)

Mandatory Spares for DCPS

MCCB/MCB-2P/contactor/ timer/ Relay of each type & Rating (as applicable)

Single Pole MCBs (for Outgoing DC Feeders)

Electronic Printed Circuit Board / Card of each type (all cards/module including SMPS Module, DC Power Supply Controller, various interface cards etc.)

VOIP System*

(i). Base Equipment (including Programming/Configuration Console, Common cards, Control Cards, power supply card, cabling, NMS, Other hardware & Accessories) excluding following (ii) to (Iii) Interface Cards With Redundant PS & CPU

(ii). VOIP interface/card (Active / Active) supporting minimum 1500 VoIP users (IPextensions) expandable upto 5000 users

(iii). E1 interfaces

VoIP Gateways for Wide Band Locations (4 ports)

VoIP Gateways for Wide Band Locations (8 ports)

VoIP Gateways for Corporate Office (24 ports)

PoE Switches minimum 4 port

Telephone Instruments& Accessories

Analog Phone&Accessories

Analog Phone&with Caller Id

Two pair cable

Faceplate

Gang Box

IP phone&Accessories

IP phone

CAT-6 Cable

CAT-6 faceplate

CAT 6 I/O

Gang Box

Furniture (Table) for placing IP phones & Configuration Consoles at SLDC

Mandatory Spares

Common Cards/Units (CPU, Switching Matrix, Power Supply Unit, Ringer etc)

VoIP Interface Card

E1 interface Card

IP Phone

RTU & LDMS

RTU base equipment comprising panels, racks, sub-racks, Power Supply modules, Communication Modules, interfacing equipment, required converters & all other required items/accessories including complete wiring for all modules for locations mentioned in Appendix-A and Expansion Requirements of spec

CPU and Communication Cards as per Appendix-A and Expansion Requirements of spec

Analog Input Card for all modules for locations mentioned in Appendix-A and Expansion Requirements of spec

Digital Input Card for all modules for locations mentioned in Appendix-A and Expansion Requirements of spec

Digital Output Card for all modules for locations mentioned in Appendix-A and Expansion Requirements of spec

Multi Function Transducer (MFT)

Weather Sensors

OLTC Transducer

Contact Multiplying Relay (CMR)

Heavy Duty Relay (HDR)

Time Synchronisation equipment without display

Communication between Co-loacted RTU equipments

Communication cards including necessary connectors

Fiber Optic cable including Conduits

LDMS System

LDMS Software

LDMS Hardware

Furniture (1 Table and 1 chair)

Inverter

Test Equipment for RTU

Master Station cum RTU simulator & Protocol Analyser Software tool

Database Configuration Tool for the supplied RTUs

Laptop PC for above software tools alongwith interfacing hardware

Spare Equipments

RTU cards of each type including CPU and time synchronisation equipment

Multi Function Transducer (MFT)

Weather Sensors

OLTC Transducer

Heavy Duty Relay (HDR)

LDMS system (complete hardware)

TRAINING CHARGES (Schedule – B)

Communication Equipment and Auxiliary Power Supply DCPS

SDH and PDH

DCPS & associated batteries

VOIP Equipment

OPGW Cable & Accessories

RTUs& LDMS

ANNUAL MAINTENANCE CHARGES(Schedule – C)

Maintenance Charges for SDH, PDH & NMS systemincluding DCPS system and VOIP Equipment for 1 year during warranty period

SDH & PDH

NMS (Hardware & Software)

DCPS & associated batteries

VOIP Equipment

Cyber audit from CERT-IN 3rd party empaneledvendor for 1 year during warranty period (Half Yearly)

Maintenance Charges for SDH, PDH & NMS system including DCPS system and VOIP Equipment for 6 years after warranty period

SDH & PDH

NMS (Hardware & Software)

DCPS & associated batteries

VOIP Equipment

Cyber audit from CERT-IN 3rd party empaneledvendor for 6 years after warranty period (Half yearly)

Maintenance Charges for Fibre Optic Cabling for 1 year during warranty period (per Fibre Optic Cable)

Maintenance Charges for Fibre Optic Cabling for 6 years after warranty period (per Fibre Optic Cable)

Maintenance Charges for RTUs& LDMS for 1 year during warranty period

Maintenance Charges for RTUs& LDMS for 6 years after warranty period

Database modification including supply of MFTs, Transducers, CMRs, HDRs, & necessary wiring & cabling for addition of new bay during Maintenance Period

Rate of Fitter / Labour

Rate of Fitter / Labour per day per labour

OPGW Rectification / Diversion work(0 to 250 km from base station of deployed team)

Cost for Mobilisation and Demobilisation of Man and Material

Dismantling of OPGW / Earthwire

Laying of OPGW 24/48 Fibre

Splicing of OPGW 24/48 Fibre

Note: 1. # - One Set of installation hardware shall contain all installation hardware fittings as may be required for 1 km of Aerial/Approach fibre optic cable. 2. The existing earthwire alongwith its hardware & fittings shall be dismantled and taken away by the contractor on installation of OPGW. Also, after the installation of OPGW, the empty drums of OPGW would be taken back by the Contractor. This factor may be taken into consideration while quoting the price 3. *** The cost for Return of Existing Earth Wire shall be a minus value and thus negated from the bid price. 4. In case of Optical cards, the final quantities shall be decided at the time of detailed engineering / link budgeting 5. *Active / Active Redundancy of CPU/Call server, Storage, Control Card, Power Supply Card shall be provided in VOIP Equipment. Distributed power supply is also acceptable 6. ** VOIP Interface/Card shall have redundancy in hot stand-by mode. 7. (All the unit/cards supplied under Sr. no. 26.01 in spare item should be identical to those supplies as main quantity)

Note: 8. ^^- Quantity to be filled in Appendix-E of Technical Specifications of RTU, declaring the no. of cards in each offered lot. No. of cards should be in line with the no. of I/O channels per card meeting with the I/O requirement of all RTU Substation sites as per Technical Specifications requirement (I/O requirement break up given at Appendix-A of RTU Technical Specs). 9. No. of bays under item no. 44 above are indicative and which may vary upto any extent depending upon the power growth in the region. 10. The Maintenance Charges for Fibre Optic Cabling per annum shall be atleast 0.5 % of the supply cost of the OPGW & associated hardware accessories (excluding spares cost) 11. The Maintenance Charges for SDH, PDH & NMS system including DCPS system, and VOIP Equipment per annum shall be atleast 1.5 % of the supply cost of the respective Equipment (excluding spares cost) 12. The Maintenance Charges for RTU and LDMS per annum shall be atleast 1.5 % of the supply cost of RTU and LDMS (excluding spares cost).

LS CABLE INDIA PVT LTD

APAR INDUSTRIES LIMITED