ADDN/ALTN TO BLDG NO. P-47 AND SPECIAL REPAIR/CONVERSION OF LT OVERHEAD LINE FROM MAIN RECEIVING STATION TO NCE (E)/MES AREA TRANSFORMER AT AF STN HASIMARA UNDER GE (AF) HASIMARA

Amount

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m deep for foundation, laying of cables, pipes in trenches, etc, and getting out in soft/loose soil, complete all as specified and as directed.

M&L PCC (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in foundation and mass concrete, complete all as specified and as directed.

M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6), complete all as specified and as directed.

M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:4), complete all as specified and as directed.

Returning filling in including spreading, levelling, watering and well ramming in layer not exceeding 25cm thick for soft/soil, complete all as specified and as directed.

Removing excavated material exc.250m and n. exc. 500m depositing where directed at a level n. exc. 1.5 m above the starting point in soft/ soil, complete all as specified and as directed.

M&L for joint free non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, coloured tiles as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick bedding layer of cement mortar (1:6), complete all as specified and as directed.

M&L for 350x250x7mm/450x350x7 to 8mm thick glazed ceramic coloured tiles on vertical surface set in neat cement slurry and pointed in white or coloured cement including 10mm thick bedding layer in CM (1:4) on brick work, complete all as specified and as directed.

M&L for 75mm thick plain cement concrete (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in sub base to floor/plinth protection/hardstanding etc finished even and smooth without using extra cement etc, complete all as specified and as directed.

S&F GI tubes of 15mm dia medium grade with all fitting and fixed complete to walIs and ceilings or laid in floors, complete all as specified and as directed.

S&F GI tubes of 20mm dia medium grade with all fitting and fixed complete to walIs and ceilings or laid in floors, complete all as specified and as directed.

S&F in repair gun-metal. globe or gate valves 20mm bore dia with iron wheel head screwed both ends for iron pipes, complete all as specified and as directed.

Supply and fix 1000 litres capacity rotational moulded polythene water storage tanks triple layer (cylindrical vertical, with closed top), hoisted and fixed in position as specified in SSR Part I including dismantling/taking down of old u/s water tank of any description, complete all as specified and as directed.

S & F 20mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (minimum weight - 210 gms), complete all as specified and as directed.

S & F 15mm bore, bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (minimum weight 15mm-90gms/20mm125gms), complete all as specified and as directed.

S&F in repair gun-metal globe or gate valves 25mm bore dia with iron wheel head screwed both ends for iron pipes, complete all as specified and as directed.

M&L for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.

Providing precast cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to match in CM (1:4), complete all as specified and as directed.

M & L for TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed.

M&L PCC (1:2:4) type B-1 (using 40mm graded crushed stone aggregate) as in surface chennals and drains (benching in manhole), complete all as specified and as directed.

M&L for rendering in CM (1:4) 15mm thick on concrete surface finished even and smooth without using extra cement, complete all as specified and as directed.

M&L for reinforced concrete pipes, class NP2 of 150mm bore of pipe, laid and jointed complete with collars complete, all as specified and as directed.

M&L for concrete bed to drain pipes including packing under and haunching against the sides of pipes with concrete after they are laid and tested in cement concrete (1:3:6) type C-2 bore of pipe 150mm, complete all as specified and as directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B1 (using 20mm graded crushed stone aggregate), smooth finished and reforming benching as required for 150mm internal dia of pipe, complete all as specified and as directed.

Taking down cement plaster of any description any thickness incl racking out joints hacking for keys scrubbing down with water and rubbish off the premises, complete all as specified and as directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stone work and precast concrete articles and rubbish off the premises, complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specially provided for and removing the debris and rubbish to a distance not exceeding 100m, complete all as specified and as directed.

Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15cm thickness, (below or above ground level) and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100m, complete all as specified and as directed.

M & L for PCC (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregates) for holdfast etc., complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) and finished even and smooth without using extra cement, complete all as specified and as directed.

M&L for rendering 15mm thick in cement mortar (1:4) in two layers (10mm thick in first layer and 5mm thick in second layer) mixed with water proofing compound as per manufacturer’s instructions in top layer, complete all as specified and as directed. (Note : WPC shall be measured & paid separately under respective item of BOQ).

Supply only liquid water proofing compound of approved quality, complete all as specified and as directed. (Make : CICO No 1/SIKA/ACCO PROOF)

M&L for rendering 5mm thick in cement mortar (1:3) on ceilling and soffits of staircase waist slab or concrete surface finished even and smooth without using extra cement, complete all as specified and as directed.

M & L for 2mm thick wall care putty on wall including finishing surfaces, complete all as specified and as directed.

M & L for preparation of new plastered surfaces of wall and applying two coats of distemper oil emulsion over one coat of priming paint, complete all as specified and as directed.

M & L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and as directed.

M & L for new finishing walls with acrylic smooth exterior paint of required shade : New work (two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm), complete all as specified and as directed.

Preparation of surfaces incl brooming down or steel wire brushing scrapping down smoke soot, moulds, moss and efflorescent salts over all decorated plastered or un plastered surfaces of wall incl cornices etc and applying two coat of oil bound distamper upto four storied building, complete all as specified and as directed.

All as per item No 38 here in before but applying one coat of exterior emulsion paint on plaster surfaces of walls/chajjas/band/facia/balcony etc and walls at any type upto four storied bldg, complete all as specified and as directed. (Shade - Dark Green/Camoflague/as directed by GE)

Dismantling of floor hearth and wall tiles including cement mortar bedding but not backing and removing rubbish outside the MOD land, complete all as specified and as directed.

M&L for scratch free, light shade, vetrified designed , coloured tiles, 10mm thick (square/rectangular) polished, area of each tile n.exc 0.36 Sqm, in floors etc incl 15mm thick screed bed in cement mortar (1:6) and set and jointed ain neat cement slurry and pointed in white or coloured cement to match with the shade of tille, complete all as specified and as directed.

M&L for granite (of any type) tiles 20mm thick machine cut, bedded incl 15mm thick screed bed in cement mortar (1:6) and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, complete all as specified and as directed.

M&L for RCC nominal mix concrete (1:1.5:3) (using 20mm graded crushed stone aggregate) as in chajjas, canopy, and similar work, complete all as specified and directed

S & F Mild steel TMT bars 5mm dia and over upto and including 10mm dia in strirrups, spacers and binders spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc, complete all as specified and directed.

S & F for anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading/screws etc. with powder coating of any colour (thickness or powder coating not less than 50 micron) , complete all as specified and directed.

S&F powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/paneling, C.P. brass/stainless steel screws,, complete all as specified and directed.

S&F 5.5mm thick sheet glass, ordinary quality and glazing in aluminium section in square exc 0.5 Sqm in each pane, complete all as specified and directed.

Taking down chowkats or frame, n.exc 1.5 Sqm each with shutters (without taking off shutter from the frame), complete all as specified and as directed.

Taking down chowkats or frames, exe 1.5 but n.exc. 4 Sqm in each with shutter (without taking off shutter from the frame) complete all as specified and as directed.

Taking down shutters of any description exc 1 Sqm but n. exc 2 Sqm each, complete all as specified and as directed.

All as per item No 51 here-in above but of size exc 2 Sqm each, complete all as specified and as directed.

M & L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer, complete all as specified and as directed.

S & F solid PVC door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, complete all as specified and as directed.

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded, plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, complete all as specified and as directed.

S & F 100mm long, aluminium anodised, barrel tower bolts of extruded section, complete all as specified and as directed.

S & F 75mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type E-22, complete all as specified and as directed.

S & F 150 mm size, aluminium handles, cast type, anodised, complete all as specified and as directed.

M&L for mild steel hold fast made out of MS flat iron conforming to Fe 290 Gde E-165 for chowkaths and other small articles incl making shape, drilling hole etc, complete all as specified and as directed.

M&L for plain cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in hold fast block incl necessary form work, complete all as specified and as directed.

M&L for rolled MS steel, roof truss (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat section) incl distance pieces cleats etc. conforming to Fe 410-W (Gde E-250) quality-A, Fe410-W (Gde E-250) quality-A with one shop coat of zinc chromate primer paint, complete all as specified and as directed.

Taking up or down GI tubing of 15mm bore and connections, including cleaning for refixing or removal to store, complete all as specified and as directed.

Taking up or down GI tubing of 20mm bore and connections, including cleaning for refixing or removal to store, complete all as specified and as directed.

Taking up or down GI tubing of 25mm bore and connections, including cleaning for refixing or removal to store.

M&L for cuttings chases, pinning in, making good to facings where required and pointing in in CM ( 1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc., and cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, cutting not exc. 10cm girth, complete all as specified and as directed.

S&F GI tubes of 25mm dia medium grade with all fitting and fixed complete to walIs and ceilings or laid in floors, complete all as specified and as directed.

Dismantaling water tanks from roof/stagging of height etc 3m and removing from site etc exc 500 but n.exc 1000 Ltrs capacity, complete all as specified and as directed.

S & F in repairs, vitreous china wash basin, oval shape, counter type of size 545 x 545x180 mm excluding taps but including chain, plug & porcelain stopper, complete all as specified and as directed. (Make : Jaguar Cat Part No. FSS-WHT-29601 or equevailent model of CERA/Paryware)

S & F in repairs, vitreous china wash down water closet pan (in size 410x720x800mm) (pedestal pattern), white, including connection to outgoing drain and flushing pipe, anti syphonic pipe with seat and cover complete but excluding flushing cistern & flush pipe including making good damaged/disturbed surfaces, complete all as specified and directed. (Make : Jaguar Cat Part No. VGS-WHT-81751P or equevailent model of CERA/Paryware)

S & F in repair 32mm dia waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

S & F in repairs, 15mm bore, PVC connection pipe 450mm long with PTMT nuts at both ends, complete all as specified and as directed.

S & F in repairs, 15mm bore, pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed long shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and as directed.

S&F in repairs fancy type 15mm bore chromium plated stop valves with long shank and cup (concealed type), cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions, complete all as specified and as directed.

S&F pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed fency type, complete all as specified and as directed.

S&F in repairs fancy type 15mm bore cast copper alloy chromium plated health faucet with 1000mm long flexible PVC pipe for EWC, complete all as specified and as directed.

S&F tubular towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges, complete all as specified and as directed.

S & F soap dish, vitreous China white, approximate size 160x 160x90mm, complete all as specified and as directed.

S & F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and as directed.

S & F toilet paper holder, chromium plated of stainless steel box type, complete all as specified and as directed. (Make : Jaguar Cat Part No. CAN-1151N or equevailent model of Prayag/CERA/Paryware)

S & F shower roseof size (150x150mm) including square shower arm with flange of 300 mm long, complete all as specified and as directed. (Make : Somany Cat Part No. 241001 for Shower & Somany Cat Part No. 240803 for shower arm or equevailent model of Prayag/CERA/Paryware)

S & F in repair grating round 140mm size of PTMT (Minium weight 50 gms), complete all as specified and as directed.

S & F in repairs, cast iron nahani trap 100mm dia with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate), complete all as specified and as directed.

S&F stack clamps for 100mm bore of ppes out of 50mm by 5mm flat iron and 16mm dia each round iron stays, including bolts and nuts and securing ends of stays to wall or roof, complete all as specified and as directed.

S & F 110mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed.

S & F 75mm bore,PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed.

S & F 110mm bore, PVC (SWR), soil waste and vent pipes in any length with or without ears, with cement joints fixed to floor, etc with all necessary fixing arrangement, complete all as specified and as directed.

S & F 75mm bore, PVC (SWR), soil waste and vent pipes in any length with or without ears, with cement joints fixed to floor, etc with all necessary fixing arrangement, complete all as specified and as directed.

S & F 110mm bore, PVC (SWR) bends of any radius, complete all as specified and as directed.

S & F 75mm bore, PVC (SWR) bends of any radius, complete all as specified and as directed.

Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, heads shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and as directed.

Supply and fix for 75mm bore PVC (SWR) branch pieces, single (single Y) equal or unequal, complete all as specified and as directed.

M&L for 75mm thick plain cement concrete (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) in sub base flooring/plinth protection/hardstanding etc finished even and smooth without using extracement etc, complete all as specified and as directed.

M&L for non asbestos, fibre reinforced designer board ceiling, 4mm thick (610mm X 610mm) with hot-dip GI heavy duty suspended ceiling grid system T-2430 with GI frame work for ceam;less ceilling comprising of GI perimeter channel, unequal flanges and web etc of suitable size suspended from soffit at approx 900mm center with GI cleat and steel expansion fastrener with and incl ceilling section incl hangers 6mm dia GI fixed to roof by means of ceilling cleats made out of GI flat all as per manufacture's instructions, complete all as specified and as directed.

Taking down carefully existing copper/aluminum point wiring (light, fan, plug,point) including pian switch, socket, ceiling rose, conduite pipe, casing caping etc and removing materials from site and making good the disturbed surfaces of walls, floors etc as per existing specification, complete all as specified and as directed.

M&L for point wiring with 1100 V grade with 1.5 Sqmm single core PVC insulated unsheathed FRLSH cable, copper conductor multistranded passing through including concealed PVC conduit not less than 20mm dia with modular box suitable for logic modular switches , sockets , etc and logic concealed modular white plates, sorroundings of suitable size as required at site with PVC insulated FRLSH unsheathed stranded copper conductor of size 1.5 sqmm as earth wire connected to common earth dolly as specified for one light/fan point controlled by one, one way switch single pole, complete all as specified and directed. Note: - (i) Rate quoted shall include for cost of making MS box and concealed in wall including cutting and sinking of boxes and making good to the walls (No extra payment will be made for the same) (ii) Provision of blank plates as per site requirement (No extra payment will be made for the same)

All as per ser item No. 96 here in above but one 5 Amps 5 pin socket point on the same board with other swiches including earth wire, complete all as specified and as directed.

All as per ser item No. 96 here in above but one 5 Amps 5 pin socket point on independent board, complete all as specified and as directed.

All as per item No 96 here-in above but with 2.5 Sqmm PVC copper stranded cable FRLSH type for one 15 Amp 6 pin socket outlet point including PVC cable 2.5 Sqmm FRLSH type copper stranded conductor as earth wire as specified & connected to commen earth & earth terminals including boards for mounting purposes, complete all as specified and as directed.

Supply and fixing switch modular type, single pole, one way, 5/6 Amp, one module, complete all as specified and as directed.

Supply and fixing switch modular type, single pole, one way, and 15/16 Amps, one module, completes all as specified and as directed.

Supply and fixing socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, two module, modular type, complete all as specified and as directed.

Supply and fixing socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin 5/6 Amp, modular type, complete all as specified and as directed.

Supply and fixing LED luminaire 600mm x 600mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. Make : Philips/Havells/Wipro/Bajaj/CG

Supply and fixing wall mounted fan 400mm sweep complete with connected up with three core copper conductor cable of suitable size from ceiling rose, complete all as specified and as directed.

S & F inverter LED batten 20 W tube light fitting with square profile and polycarbonate channel,lithium ion battery with charging time 8 hours - 10 hours and backup time upto 4 hours, complete all as specified and as directed. Make - Havells cat no -LHEXACP7FN1W3020 or equivalent model of make Philips/Bajaj/Wipro

S & F LED lamp 09 W, B22 base, complete all as specified and as directed. Make - Havells cat no -LHLDEUEBML8R007 or equivalent model of make Philips/Bajaj/Wipro/Crompton

S & F in repair angle type lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings, complete all as specified and as directed.

Supply and fix exhaust fan, steel body 1400 RPM AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers, including making hole in existing wall any size and type of required size and connecting copper cable of size 3 x 2.5 Sqmm up to nearest electric point in flexible conduit complete all as specified and as directed.

S&F MCB DB SPN double door 8 way, IP 43 protection concealed on wall, complete all as specified and as directed.

Supply and fixing 240V, 10 KA 'C' series miniature circuit breaker (MCB) of single pole capacity 6 to 32 Amp, complete with connection testing and commissioning, complete all as specified and as directed.

Supply and fix MCB SPN 6 to 32 Amp ,10 KA 'C' series, complete all as specified and as directed.

M&L for sub main wiring of two run 6 Sqmm single core PVC insulated, unsheathed multistranded copper conductor cable FRLSH 1100 Volts grade, drawn through and including rigid PVC heavy duty surface conduits and accessories (ISI marked) including one run of 6 Sqmm single core PVC insulated unsheathed copper earth continuity conductor including making good disturbed surface, complete all as specified and as directed. (Note : Two runs of single core cable with one run of earth continuity conductor including PVC conduits accessories shall be measured and paid as one length.)

M&L in replacement of earthing complete with galvanised steel earth plate electrode 60cm×60cm× 6.3mm thickness, buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m below normal ground level connected to and including galvanised earth lead wireof 4.00mm dia by means of nuts & bolts, chek nuts and washers of galvanised including PCC pit of (1:2:4) type B-1 cover reinforced with XPM weight not less than 4 kg/Sqm and 6mm dia bar handle, earth pit angle iron frame of size 25mm x 25mm, excavation and earth work in any type of soil, charcoal dust, salt,| light grade Gl watering pipe 20mm dia with funnel and wire mesh and medium grade Gl protection pipe of 15mm bore from top edge of earth plate upto main distribution board complete all to as shown in electrical plate No 3 of MES Sch 2009 (Part 1) connected main switch board all as specified and testing on completion, complete all as specified and as directed.

Supply and fix CPVC pipe of size 25mm outer dia in trenches, SDR-13.5 & plain CPVC SDR 11 fittings, like elbow, tee, socket, reducer, bushings, step over bends, end caps, end plugs, etc and with CPVC solvents cement including taking down old unserviceble pipes, complete all as specified and as directed. Make: Supreme/Eurotech /Astral/SFMC/ FINOLEX

S&F for CPVC ball valve of size 25mm dia suitable for CPVC pipe including necessary fittings and taking down old unserviceble ball valve, complete all as specified and as directed. Make: Supreme/Eurotech /Astral/SFMC/ FINOLEX

Supply and laying double walled corrugated (DWC) HDPE duct pipe of 40mm dia conforming to IS, approved colour complete with fittings for cable protection, complete all as specified and as directed.

All as per item No. 117 above but 80mm dia, complete all as specified and as directed.

Material & Labour galvanized iron tubing 50mm bore (light grade) with all fittings for protection of cables, laid in trenches, complete all as specified and as directed. (Note:Excavation and earth work will be measured and paid separately)

All as per item No. 119 above but 40mm bore, complete all as specified and as directed.

Dismantling cross arm of MS channel or angle section etc and removing from site, complete all as specified and as directed.

Dismantling of old un-serviceable ACSR conductor of any size and make from LT over head line and removing from site, complete all as specified and as directed.

Dismantling of old insulator of any size and make from LT over head line, complete all as specified and as directed.

Dismantling earth wire or copper conductor, service feeder or distributor span, complete all as specified and as directed.

Dismantling stay assembly complete with demolition of foundation, earth work etc, complete all as specified and as directed.

Taking down/out unserviceable UG cables of cross sectional area up to 120 Sqmm and connections including bricks, GI pipes, etc of any descriptions, laid in trenches and/or fixing with walls/poles, complete all as specefied and as directed.

Relaying serviceable LT UG cable any size in trench/floor/pole including connecting, complete all as specified and as directed. (Note-Excavation and earth work shall be measured paid separately under respective item)

Materials and labour for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross- sectional area 120 Sqmm 3.5 core, complete all as specified and as directed. Note : Excavation and earth work shall be measured and paid separately under respective items.

All as per item No 128 above but sectional area 95 Sqmm 3.5 core, complete all as specified and as directed.

All as per item No 128 above but sectional area 25 Sqmm 3.5 core, complete all as specified and as directed.

All as per item No 128 above but sectional area 16 Sqmm 4 core, complete all as specified and as directed.

M & L for boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of 80mm dia suitable for 0.4 mpa working pressure, complete all as specified and as directed.

M & L for cable route indicator made out of CI 15cm dia disc shaped with embossed letter (LT cable) fixed to MS angle iron 40 x 40 x 5mm and 1m long embeded in ground with PCC (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) of size 250 x 250 x 200mm, complete all as specified and as directed.

Supply, fabricating, installing, testing and commissioning of Outdoor type LT feeder pillar box of suitable size factory fabricated (CPRI approved), cubical panel, floor mounted double door, dust and vermin proof CPRI approved made out of 3.15mm thick CRCA sheet mounting on 50x50x5mm Angle iron supports at the base duly painted with synthetic enamel paint and panel board with front and back opening and locking arrangement compete including finishing with two coats of powder coated paint of approved shade over one coat of red oxide zinc chrome primer including all busbar of copper bus Bar strip 40mm x 10mm for three phase 4 wire 415 Volts, 50 Hz, AC supply including suitable size copper conductor control wiring, necessary cable glands, lugs etc, proper arrangement for ventilation with and including the following accessories at near NCEs sub station (a) INCOMING (i) MCCB 400 Amps, AC 4 pole 415 Volt 36 KA breaking capacity - 01 No. with suitable rotary extendable handle for operation of MCCB Make: ABB/L&T/Schneider/Havells/Legrand (ii) Multi function meter - 01 Nos with CT's of required rating (iii) Indicating lamp - 03 Nos (b) OUTGOING (iv) MCCB 200 Amps, AC 4 pole 415 Volt 25 KA breaking capacity - 02 Nos. Make: ABB/L&T/Schneider/Havells/Legrand (v) MCCB 63 Amps, AC 4 pole 415 Volt 16 KA breaking capacity - 03 Nos. Make: ABB/L&T/Schneider/Havells/Legrand (vi) MCB SPN 63 Amps, 10 KA breaking capacity - 08 Nos. Make: ABB/L&T/Schneider/Havells/Legrand (vii) One No. panel mounted astronomical timer with automatic on-off through/for mannual on-off. 65 Amp TP contactor 415 Volt & by-pass function 63 Amp MCB TPN -02 Nos

Supply, fabricating, installing, testing and commissioning of Outdoor type LT feeder pillar box of suitable size factory fabricated (CPRI approved), cubical panel, floor mounted double door, dust and vermin proof CPRI approved made out of 3.15mm thick CRCA sheet mounting on 50x50x5mm Angle iron supports at the base duly painted with synthetic enamel paint and panel board with front and back opening and locking arrangement compete including finishing with two coats of powder coated paint of approved shade over one coat of red oxide zinc chrome primer including all busbar of copper bus Bar strip 40mm x 10mm for three phase 4 wire 415 Volts, 50 Hz, AC supply including suitable size copper conductor control wiring, necessary cable glands, lugs etc, proper arrangement for ventilation with and including the following accessories at near bldg No. 664 (a) INCOMING (i) MCCB 200 Amps, AC 4 pole 415 Volt 25 KA breaking capacity - 01 No. with suitable rotary extendable handle for operation of MCCB Make: ABB/L&T/Schneider/Havells/Legrand (ii) Multi function meter - 01 Nos with CT's of required rating (iii) Indicating lamp - 03 Nos (b) OUTGOING (iv) MCCB 63 Amps, AC 4 pole 415 Volt 16 KA breaking capacity - 06 Nos. Make: ABB/L&T/Schneider/Havells/Legrand (v) MCB SPN 63 Amps, 10 KA breaking capacity - 08 Nos. Make: ABB/L&T/Schneider/Havells/Legrand

S&F in repair MCB DB TPN double door 04 way, IP 43 protection concealed on wall, complete all as specified and as directed.

S&F in MCB SPN 6 to 32 Amp, 10 KA, complete all as specified and as directed.

S&F in MCB 63 Amp 4 pole, 10 KA, complete all as specified and as directed.

M & L in replacement of MS box of size 900 x300 x 1500mm (double door) 2.0mm thickness, dust proof with front opening hinged door both side, made out of 2mm thick MS sheet cubical type with powder coated painting for mounting of 04 Nos electric meter etc inside the box fixed in wall by necessary cutting of wall of suitable size in concealed and making good the surface, by applying cement work, brick work and matching colour (oil bond distemper) etc including dismantling of old MS box, electric meters and fixing the new electric meters in new box carefully including necessary electric connection by suitable size of copper conductor cable of suitable length and testing, complete all as specified and as directed.and directed. Note : (a) Any plastering work involved while taking out old unserviceable meter box and refixing the new meter box is deemed to be included in this rate. (b) PVC flexible conduit required within the meter boxes is deemed to be included in this item rates. (c) Taking down old meter from existing boxes carefully and re-fixing in the new meter box shall be included in the quoted rate.

S & F 3 core PVC insulated and sheated, multi stranded copper conductor cable of size 1.00 Sqmm passing through 20mm dia medium grade PVC conduit including necessary fittings and flexible conduit as required at site from Junction box to fitting fixed on pole/wall with necessary MS clamp, complete all as specified and as directed.

S & F junction box made from SMC/FRP sheet ready made of size 200 X 140 X 95mm with aluminium bus bar of 50 Amp capacity for RYB and half for neutral made in suitable size fixed inside the junction box with necessary supporting insulators fixed on hylem sheet, MS sheet steel fixed inside the bottom portion of box to connect the cable gland complete, entire assembly fixed to pole/wall with MS clamp 25 X 5mm and nuts & bolts, or inside the copping of pole/post top including MCB SP 6 Amp 10 KA 240 V - 1 No, with necessary size copper lugs for connecting cables from junction box to fittings, complete all as specified and as directed.

M & L earthing complete with GI earth plate electrode 600mm x 600mm x 6mm thick burried directly in ground vertically to a depth not less than 2.25m below ground level with the top edge of earth plate at depth not less than 1.5m below ground level connected with galvanised earth strip of size 32x6mm dia by means of bolts, nuts, check nuts and washers protected by 40mm bore light grade GI pipe, funnel with 20mm bore GI medium grade pipe for watering, wire mesh, including concrete pit in PCC (1:3:6) type C-1, with 50mm thick pre-cast R.C.C. (1:2:4) type B-1 cover slab (reinforced with 8mm dia deformed bar @ 15cm C/C both ways and suitable handle of 10mm dia round bar), including providing charcoal or coke and common salt in alternate layers of 15cm compacted thickness all around the earth electrode, with funnel, wire mesh, aluminium lugs, complete in all respect and other end connected with main switch board or earthing test point as directed, including necessary earth work and disposal of spoil to a distance not exceeding 50m and necessary testing on completion inclduing taking down old one, complete all as specified and as directed. Note: An amount of Rs.50210.00 on account of credit schedule for schedule 'A' part - II shall be deducted from the total amount of BOQ to arrive at the contract sum.

M/S I P GROUP

M/S MANODEEP CONSTRUCTION

M/S ANNI ENTERPRISE

SHRI SURAJIT SIKDER

M/S ASHOK ENTERPRISE

M/S ANIL KUMAR BAUL

MAJUMDER ENTERPRISE