Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.9 LAccepted-AOC | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹16.3 L+₹3.4 L (26.2%)Rejected-Finance H NO 1395 SECTOR 21 PANCHKULA 134112 HARYANA | PANCHKULA | HARYANA | 134112 | L2 | Rejected-Finance NOT BEING LOWEST |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
21 Dec 2020, 6:00 pmClosed
GE 863 EWS
GE 863 EWS C/O 56 APO
SPECIAL REPAIR TO DG SETS 2X50 KVA MAKE KRILOSKAR INSTALLED AT POWER HOUSE AT POOH PROVISION OF 10 X STREET LIGHT AT OLD DEPOT AREA FOR 136 I INF BDE OMC AT POARI AND PROVN OF ENHANCEMENT OF EXISTING TRANSFORMER CAP 63 KVA TO 250 KVA AT KARCHAM IN
2020_MES_351313_1
GE 863/EWS-T-20 OF 2020-21
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
KARCHAM POOH AND POARI
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE 863 EWS
₹30,000
Yes
23 Jan 2021
17 Oct 2020
23 Dec 2020
17 Oct 2020
21 Dec 2020
31 Oct 2020
Amount
Supply and erecting in a truly veritical position steel tubular swaged poles complete with Cast iron base plate, finial taper plug, bolts, nuts & screws all as specified type 410 SP- 31 (9 mtr long LT ploes) and incl painting with one coat of red oxide and two coats of aluminium paint (outside) and black bitumen paint on hidden surface in foundation including drilling of holes for fixing 'D' iron clamps & hooks for continuous GI earth wire complete all as specified and directed. Note : (excavation, earth work and PCC work shall be measured and paid separately).
Material & labour for earthing complete with galvanised steel earth plate electrode 60cmx60cmx6.0mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below the ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of SSR Part-I 2009 and connecting to earthing test poinnt and testing on completion including, necessary excavation, earthwork, PCC works in 1:2:4 type B-1 using 20mm graded stone aggregate and CI earth pit cover with watering pipe 20 mm dia GI pipe medium grade, funnel with wire mesh and lugs and GI pipe 15mm bore dia of light grade for protection of earth lead complete all as specified and directed.
Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 m in depth and getting out in a hard/dense soil complete all as specified and directed.
Returning filling in incl spreading, leveling watering and well ramming in layer n exc.25 cm in soil complete all as specified and directed.
M&L for sand cushioning the UG cable screened unwashed river sand and punning for cushioning to cable complete all as specified and directed.
M&L for laying dry bricks old size with subclass 'B' made of burnt clay best quality locally available with permissible tolerance, laid straight in trench for protection of cable all as specified and directed.
Removing excavated surplus material to a distance n.exc 50 m and deposting where directed at a level n exc. 1.5 m above the starting point in any type of soil complete all as specified and directed.
M&L for cement concrete (1:4:8) type D2 using 40mm graded stone aggregate for poles/ stays foundation complete all as specified and directed by Engr-in-Charge.
M&L for cement concrete (1:3:6) type C1 using 20mm graded stone aggregate as in coping of poles including form work and finishing to all exposed surfaces by using extra cement complete all as specified and directed.
Supplying, laying, jointing and testing cable XLPE insulated IS 7098 (Part-I)-1988 marked, screened, PVC sheathed, armoured electric power cable (heavy duty) with aluminium conductor for working voltage upto and including 1100 bolts, cross sectional area of cable 10 sq mm, 2 core laid in trenches/fixed on ploe/wall/passed through pipe complete all as specifed and directed.
M&L for programable street light timer panel with in sheet steel enclosure with & incl MCB SPN 40A, Contactor 32A/TP, timer complete all as specified and directed.
Supply and fix Automatic change over switch 4 pole 440 volt AC 100 Amp complete all as specified and directed.
Supply and fixing LED street light fitting 45 Watt LED with lens, IP 66 protection compact street light fitting with pressure die cast aluminium housing and toughened glass alongwith twin core 1.5 sqmm copper cable form pole box to street light complete all as specified and directed. Make : Crompton Cat Part No LSTS-45-CDL or equivalent makes in appendix 'B' as approved.
Supply and fixing GI bracket made out of GI tubing 40 mm bore dia medium grade, 1.2 mtr long bent ot shape alongwith MS clamps made out of 40x6 mm flat iron-02 sets and nuts, bolts and washers duly painted with aluminium paint over a coat of red oxide primer complete all as specified and directed.
Supply and fixing PVC ploe box of size 250x200x105mm including 2 Nos of aluminium bus bar 50 Amps, of suitable length and one single pole MCB 10 Amp complete with fixing arrangement to be fixed on poles complete all as specified and directed.
Material and labour for repair/ top overhauling to diesel engine driven generating set 6 cylinder 50 KVA, RPM-1500, Make KIRLOSKAR Model No. HA 694, Installed at 136 (I) Inf Bde Camp, Pooh including following job works and replacement of minor spare parts :- (a) Disconnecting the electrical connections of alternator decoupling of alternater from engine disconnecting the inlet and exhaust manifold, turbo charger, exhaust pipes, fuel connection, Governor, water pump, air cleaners hoses etc from the Engine. Strip opening the parts such as cylinder heads, tappet covers, exhaust and inlet valves, valve guides, cylinder liners pistons assy, connecting rods, cam shafts, big end and small end bearings injector assembly, oil pumps etc including all minor parts such as nut bolt, ignition switch, control panel etc as directed at site and cleaning of all parts by Kerosene oil, including segregating of serviceable and unserviceable parts. (b) Transportation of unserviceable engine parts such as cylinder heads, water pump, oil pump, Governor injector and turbo charger, Radiator, self starter from Power House to Wksp, for carrying out repair work and re-transporting from Worksp to 136 (I) Inf Bde Power House building after repair / overhauling. (c) Grinding, polishing and stripping out of cylinder heads and replacement of valve seats and valves. (d) Reassembling the Engine complete and connecting alternator including proper alignment with base plate complete. (e) Testing and commissioning of DG set after repair on full load upto the entire satisfaction of GE/Engineer-in-Charge. Note : (i) The major spare parts required for repair of engine shall be measured and paid separately under respective item as "supply only" and labour part for replacement of major spare parts shall deemed to be included in quoted rate of this item. (ii) The cost of Minor spare parts sucha as nuts, bolts, washer, banjo bolt, 'O' rings copper washer etc, required for proper functioning of DG set and not mentioned in Schedule -'A' / BOQ but required for functiong of engine deemed to be included in the quoted rate of this item and nothing extra shall be entertained on this account. (iii) Serviciable parts shall be deposited in MES store yard.
Supply only the following spare parts of engine for proper functioning complete all as specified and directed:-
Cylindrical liner cat part No 02.019.04.0.00
Piston Assy Complete cat part No 02.443.50.0.00
Lub Oil Pump Assy cat part No 06.010.60.0.00
Crank Shaft Assy with Crank Gear (Upgr) cat part No 06.004.40.0.00
Cam Shaft and Gear Assy Cat Part No 06.738.10.0.00
Cam Case Assy Without bearing cat part No 06.001.50.0.00
Bearing Main Kir HA 694 cat part No M.075.4.00.003
Bearing C/R Kir HA 694, 0.25 (Nick) cat part No B.075.4.10.003
Bearing IG Bush Kir cat part No G.073.5.00.703.
Bearing C/Bush Kir cat part No.C.073.6.00.703
Bearing bush S/E Kir HA 694 cat part No.S.075.5.00.703
Bearing T/W Kir HA 694 cat part No W.073.5.00.003
Pair of inlet and Exhaust valve cat part No.02.445.10.0.00
Valve Guide (to suit valve seal fit) cat part No.06.631.01.0.00
Valve seal cat part No. 06.631.02.0.00
Oil seal (115 x 140x 12) CR Make cat part No 03.007.06.0.00
Oil Seal (65 x 85x 13) (CR Make) cat part No. 03.013.06.0.00
Intermediate ring (1.1 mm thick) cat part No 06.292.01.0.00
Set of Joints (HA 694) cat part No. 06.292.01.0.00
Set of Rubber 'O' Rings (HA 694) cat part No 06.051.10.0.00
Set of Copper Washer-6R 1080 TA cat part No 6H.061.10.0.00
Koel Care Super Genuine oil in 7.5 Ltrs cane, cat part No 82.050.10.0.07
Primary element cat part No 3H.132.01.0.00
Secondary element cat part No 3H.132.02.0.00.
Oil filter cat part No 06.436.01.0.00
Fuel pipe (feed Pump-Fuel filter inlet cat part No. 06.333.01.0.00
Fuel pipe (Fuel Filt out-Fuel pimp inlet) cat part No.06.333.02.0.00
Fuel pipe (inlet) M14 x M14 Banjo B cat part No. 4H.896.09.0.00
Fuel pipe (return) M12 x 1.4 Male pipe cat part No. 06.5001.21.0.00
Nozzle leak off pipe cat part No 06.819.20.0.00
Banded Cogged Belt (2JAx52-LP- cat part No 06.032.04.0.00
V Belt A44 cat part No 60.060.01.0.00
starter Ring 121 Teeth , 3.175 Model cat part No. 03.035.02.0.00
Oil spray Nozzle Assy cat part No. 02.002.10.0.00
Repair/ calibration, checking pressure, testing the Fuel pump and Fuel injectors including replacement of worn out spare parts and testing the same after fixing 50 KVA DG Set complete all as specified and directed.
M&L for Cylinder head repair /grinding, polishing and cutting of valve seat etc of 50 KVA DG Set complete all as specified and directed.
S&F Bush fitment charges complete all as specified and directed.
Material & labour for replacement of broken unsv oil sump/crank case with new one suitable for 50 KVA DG set complete all as specified and directed.
Repair/ servicing of Self starter assy for 50 KVA DG set complete all as specified and directed.
Repair/ servicing and checking the Charging alternator for 50 KVA DG set complete all as specified and directed.
Net Contract Sum will be after deducting Sch Of Credit of Rs. 6659.00
R B TRADERS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .