SPL REP TO APFC PANELS, EARTHING AND CONNECTED ACCESSORIES AND PROVISION OF STREET LIGHT POLES AT ROAD LEADING TO DUKE NOSE WATCH TOWER AT INS SHIVAJI LONAVLA

Amount

Taking down under ground 1.1 KV (E) Grade LT cable of size upto 50 sqmm to 120 sqmm 3.5/4 Core from pole/trenches/walls / ducts etc., for carrying out repairs , relaying, rerouting, laying back through same / different route after carrying out repair / issue under schedule of credit all as directed by Engineer-in-Charge at site.

Supply laying and testing cable XLPE insulated screened beded,galvanized steel trip or wire armoured, electric power cables (heavy duty) 1100 Volt grade wiyh stranded aluminium conductor of size 50 sq mm 3.5 core. Including taking down old unserviceable cable any size by dismantling of all electrical connection etc all as diercted.

All as per item no 3 above but of size 70 sq mm 3,1/2 core.

All as per item no 3 above but of size 120 sq mm 3,1/2 core.

S & F Outdoor Type, weather and vermin proof Bus bar panel made out of 2 mm thick stainless steel sheet including four pole 200 Amps MCCB 415 Volts 50 Hz with front opening and locking arrangement, 200 Amps capacity aluminium bus bar for phase, 3 No's and 1 No 200 Amp bus bar for neutral, mounted on epoxy insulator including neccessary copper control wiring, heat shrinkable, RYB coloured sleeves over bus bar for identification, earth shields, circular holes at bottom / top to receive incoming and outgoing cable, cable lugs, cable gland of sizes as required floor mounting angle iron frame made out mild steel angle iron of size 40 x 40 x 6 mm grouted on PCC (1:3:6) upto required height all as specified and as directed by Engr-In-Charge .

M & L earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.’25 mtr below normal ground level) with top edge of the plate not less 1.5 mtr below normal ground level connected to galvanized earth plate using galvanised iron strip 25×4 mm as earthing lead by means of suitable size of GI nuts, bolts, check nuts and washers all as specified in electrical plate SSR Part I including necessary .Exc & earth work, providing charcoal and salt dust layers and construction of PCC pit in 1:3:6 using 20 mm size graded stone aggregate, precast RCC 40 mm thick cover in 1:2:4 type B 1 with 12 mm dia steel MS plain bar, lifting handle GI pipe of 50 mm bore for earth lead protection andGI pipe 15 mm dia for watering, with funnel and wire mesh including testing on completion. All as specified and as directed incl dismentling existing unsserviciable earthing .

Supply, fabricate, errect, connecting, testing, commisioning with replacement of LT pannels cubical outdoor type weather and vermin proof made out of 3 mm thick Stainless steel sheet of suitable size with front and rear opening and locking arrangement having 800 Amps capacity aluminium bus bar for phase 3 Nos and 1 No 800 amps bus bar for neutral mounted on epoxy insulator necessary copper control capacity control wiring heat shrinkable RYB coloured sleaves over bus bar for identification floor mounting angle iron base earth shields circular holes at bottom/top to receive incoming and outgoing cable. cable lugs, cable gland of size as required pannel suitable for the following control/filments sensible for 3 phase 50Hz 415V system complete comprising the following and including necessary PCC/Brick work for mounting of pannel. (ITW) (a) 4 Nos bus bar high conductivity aluminium alloy strips proper insulated for phase (RYB) with 800 Amps & neutral rating 630 amps and mounting on porcelain support.- 01 Set (b) ACB 4 Pole, 415 V, with Thermal Magnetic Release (Manual Fixed type) of capacity ( Incoming) - 01 No (c) MCCB 400 Amp 36 KA 4 pole 415 Volt - 02 Nos (d) MCCB 315 Amp 36 KA 4 pole 415 Volt - 01 Nos (e) MCCB 200 Amp 36 KA 4 pole 415 Volt - 05 Nos (f) MCCB 100 Amps 16 kA 4 pole 415 Volt -02 Nos (g) LED Indicator lamp RYB -Set of three-01 Nos (h) Digital multifunction meter (V, A, F, PF, KW, KVA)

Supply, fabricate, errect, connecting, testing, commisioning with replacement of LT pannels cubical indoor type weather and vermin proof made out of 3 mm thick CRCA sheet of suitable size with front and rear opening and locking arrangement, epoxy powder coated having colour siemens grey, having 800 Amps capacity aluminium bus bar for phase 3 Nos and 1 No 800 amps bus bar for neutral mounted on epoxy insulator necessary copper control capacity control wiring heat shrinkable RYB coloured sleaves over bus bar for identification floor mounting angle iron base earth shields circular holes at bottom/top to receive incoming and outgoing cable. cable lugs, cable gland of size as required pannel suitable for the following control/filments sensible for 3 phase 50Hz 415V system complete comprising the following and including necessary PCC/Brick work for mounting of pannel. (Admin Block) (a) 4 Nos bus bar high conductivity aluminium alloy strips proper insulated for phase (RYB) with 400 Amps & neutral rating 315 amps and mounting on porcelain support.- 01 Set (b) MCCB 630 Amp 36 KA 4 pole 415 Volt ( Incoming) - 01 No (c) MCCB 200 Amp 36 KA 4 pole 415 Volt - 03 Nos (d) MCCB 160 Amp 25 KA 4 pole 415 Volt - 03 Nos (e) MCCB 100 Amp 25 KA 4 pole 415 Volt - 04 Nos (f) MCCB 63 Amps 16 kA 4 pole 415 Volt -06 Nos (g) LED Indicator lamp RYB -Set of three-01 Nos (h) Digital multifunction meter (V, A, F, PF, KW, KVA)

S&F in replacement of MCCB 4 Pole, 415 V, Adjustable type,250 Amps with breaking capacity 36 KA Complete all as specified and directed by Engineer-In-Charge. Make:L&T /Havells/Standard.

All as per item No. 9 above but 400A, 36 KA. Complete all as specified and directed by Engineer-In-Charge.

All as per item No. 9 above but 630A, 50 KA. Complete all as specified and directed by Engineer-In-Charge.

All as per item No. 12 above but 150 KVAR , Complete all as specified and directed by Engineer-In-Charge.

All as per item No. 12 above but 100 KVAR , Complete all as specified and directed by Engineer-In-Charge.

All as per item No. 12 above but 50 KVAR , Complete all as specified and directed by Engineer-In-Charge.

Supply & fixing in Replacement of power capacitor bank of the following capacities of make L&T,ABB,Siemens :- (a) 10 KVAR box type heavy duty capacity 440V Make:- L&T / HAVELLS/ ABB / SIEMENS

(b) 15 KVAR box type heavy duty capacity 440V Make:- L&T / HAVELLS/ ABB / SIEMENS

(c) 20 KVAR box type heavy duty capacity 440V Make:- L&T / HAVELLS/ ABB / SIEMENS

Supply and fix Contactors capacitor duty rating 3 phase 415 V suitable for 20 KVAR Make:- L&T / HAVELLS/ ABB / SIEMENS Complete all as specified and directed by Engineer-In-Charge.

Supply and fix display/relay unit computerised control of Power Factor Digital type 12 steps 440 V Make:- L&T / HAVELLS/ ABB / SIEMENS Complete all as specified and directed by Engineer-In-Charge.

Supply and fix display/relay unit computerised control of Power Factor Digital type 8 steps 440 V Make:- L&T / HAVELLS/ ABB / SIEMENS Complete all as specified and directed by Engineer-In-Charge.

Excavation in trenches not exc. 1.5m wide and not exc 1.5m in depth and getting out in hard/dense soil for laying of cable trenches all as specified and directed.

All as per item No.23 Herein before but in hard dense soil

Returning filling in, including spreading, levelling, watering and well ramming in layer not exc 25cm all as specified.

Removal of surplus soil (excavated soil) to distance not exceeding 50m and depositing where directed at a level not exc 1.5m above the starting point and all specified.

M&L for providing dry river sand / crush stone dust for cushioning to UG cable including punning down of sand in layers all as specified. Note :- Cushioning will be measured and paid after punning down.

Supply and laying factory cast, unreinforced precast concrete cable cover factory made embossed the mark “LT CABLE” class LV type1 flat size 250x150x40 mm laid in trenches as specified and as directed.

Supply and fix FR PVC insulated cable 1100 V grade with multistranded copper conductor of size 1.5 Sqmm 3 core conductor all as specified and directed by Engineer-In -Charge at site

Supply & fix in replacement of ,New generation energy saving and environmental friendly long life LED street light 72 Watt made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 .Make:Bajaj CAT Part No ENXTP 84L WH CR PC SD or equivalent to CG/Philips/Wipro complete all as specified and directed

M & L Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.’25 mtr below normal ground level) with top edge of the plate not less 1.5 mtr below normal ground level connected to galvanized earth plate with 4.0 mm thick GI wire by means of suitable size of GI nuts, bolts, check nuts and washers all as specified in electrical plate SSR Part I including necessary .Exc & earth work, providing charcoal and salt dust layers and construction of PCC pit in 1:3:6 using 20 mm size graded stone aggregate, precast RCC 40 mm thick cover in 1:2:4 type B 1 with 12 mm dia steel MS plain bar, lifting handle GI pipe of 50 mm bore for earth lead protection andGI pipe 15 mm dia for watering, with funnel and wire mesh including testing on completion. All as specified and as directed incl dismentling existing unsserviciable earthing .

Supply and installation of Hot dip galavanised iron pole 7 mtr long sheet thickness 3 mm. C/s A/F - top = 70mm, bottom =130 mm, base plate 200x200x12 mm, long weatherproof reinforced door opening with junction box mounting arrangement but including of junction box with 4 Nos aluminium Bus bar and including 1.0 M long single arm bracket made of 40NB B class pipe having top 70 mm, 20 dia threaded made to J shape M20x600mm long steel grade EN8 grade foundation bolts - 4 nos with nuts, templates and all complete as per approved drawing (with internal accessorises like connectors, mcb) . including taking down old rusted pole of any size by digging or cutting all as directed . Foundation RCC 1:1.5:3 shall be of size 550x550mm and depth 1500 mm with 8 nos. 12mm dia. tor bars as main bars and 8mm dia. tor bars stirrups @ 190 mm c/c as per approved drawing(Including form work). This reinforcement shall conform to IS:1786 latest edition. The foundation shall extend above sorrounding ground/driveway level for 200 mm and have slant 63mm dia. PVC sleeve cast insitu foundation for cable entry as per the drawing. Excavation, PCC, RCC,Form work and reinforcement shall be deemed to be included in qoted rates.

Supply and installation of Hot dip galavanised iron pole 7 mtr long sheet thickness 3 mm. C/s A/F - top = 70mm, bottom =130 mm, base plate 200x200x12 mm, long weatherproof reinforced door opening with junction box mounting arrangement but including of junction box with 4 Nos aluminium Bus bar and including 1.0 M long double arm bracket made of 40NB B class pipe having top 70 mm, 20 dia threaded made to J shape M20x600mm long steel grade EN8 grade foundation bolts - 4 nos with nuts, templates and all complete as per approved drawing (with internal accessorises like connectors, and mcb) including taking down old rusted pole of any size by digging or cutting all as directed . Foundation RCC 1:1.5:3 shall be of size 550x550mm and depth 1500 mm with 8 nos. 12mm dia. tor bars as main bars and 8mm dia. tor bars stirrups @ 190 mm c/c as per approved drawing(Including form work). This reinforcement shall conform to IS:1786 latest edition. The foundation shall extend above sorrounding ground/driveway level for 200 mm and have slant 63mm dia. PVC sleeve cast insitu foundation for cable entry as per the drawing. Excavation, PCC, RCC,Form work and reinforcement shall be deemed to be included in qoted rates.

S & F Outdoor Type, weather and vermin proof Bus bar panel made out of 2 mm thick stainless steel sheet with front opening and locking arrangement, epoxy powder coated having colour siemens grey, 200 Amps capacity aluminium bus bar for phase, 3 No's and 1 No 200 Amp bus bar for neutral, mounted on epoxy insulator including neccessary copper control wiring, heat shrinkable, RYB coloured sleeves over bus bar for identification, earth shields, circular holes at bottom / top to receive incoming and outgoing cable, cable lugs, cable gland of sizes as required floor mounting angle iron frame made out mild steel angle iron of size 40 x 40 x 6 mm grouted on PCC (1:3:6) upto required height all as specified and as directed by Engr-In-Charge .

Cutting and filling bituminus road as per direction of Engr in Charge for laying of UG cable and match the existing road to the existing system.

M & L for GI pipe/ tubes light grade of size 50 mm dia for UG cable protection with all fittings laid in trenches, on poles to crossing the roads/Nalah etc .

S&F in Timelite Distribution Board 63 Amp 3 pole / 230 Volt Digital Time Switch including Street Light Timer assembly( 01 Nos) comprising of Digital timer- FM1 Quartz with 3 Pole ML-2 Contactor duly prewired with bypass arrangement- 02 Nos, Digital Ampere Meter conformuing to DM 3258 of Conzerv Schiender-02Nos & LED Indicating Lamp for RYB phase indicator - 01 Set complete all as specified and as directed.Make Indoasian Cat Part No- TL065DBO or equivalent to Schindler / Indoasian.

Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material heat Shrink type and accessories suitable for 3 ½ / 4 core XLPE, armoured, Aluminium conductor cable of size upto 50 sqmm,Indoor/Outdoor type complete all as specified and as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16.0 sq mm 4 core

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25.0 sq mm 4 core

SHAILENDRA B TULSANI

metro electrical services