Renovation of Hand Wash Area

Amount

Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer-in-Charge.

Dismantling tile work in walls, floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm

Providing and applying in position average 12 mm thick smooth finish cement Plaster in cement mortar 1:4 (1 cement : 4 fine sand) to all inetrnal walls, using fine or coarse sand and adding polypropylene fibre of approved quality in desired quantity per bag of cement as per manufacturers specifications complete. Rate includes providing chicken mesh to all joints of RCC members with Brick walls in all positions in proper line, level & plumb at all levels and heights with necessary scaffolding, cleaning of surfaces, raking out joints, roughening of surfaces ,curing etc complete as directed at site. Rate includes making Flush/raised/sunk or moulded bands of any width, recesses, making grooves etc. complete as per direction of Engineer-in-charge and no extra payment shall be considered for the same.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size Size of Tile 600 x 600 mm

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish, bracket support of sufficient strength as per direction of Engineer-in-charge etc. complete at all levels. Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble Area of slab over 0.50 sqm

Granite stone slab of colour black, Cherry/Ruby red Area of slab over 0.50 sqm

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work

Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

Providing & fixing in position vertical supports made out of 36 mm thick white marble slabs sandwich supports (two slabs of 18 mm joined together using epoxy adhessive to full surface area) placed at specified spacing as the direction of Engineer-in-charge. Rate includes providing vertical garnite band to vertical supports with moulded/polished edges, 1:4 mortar and cutting & opening required as and when required.

Providing and fixing white glazed vitreous Below Counter Wash Basin of size 560 x 450 mm (minimum) with all accessories like C.P. brass pop-up waste coupling, PVC Waste pipe, PVC connection pipe and necessary fittings and hardware like basin clip etc. as per the manufacturer's specifications and as per the directions of the Engineer-in-Charge.

Providing and fixing 15 mm chrome plated brass pillar cock of approved quality with aerator, 450 mm long SS flexible braided hose pipe (with Nipple, Nut, O-Ring) with gasket, installation kit, all other fittings and fixtures as per the manufacturer's specification etc. complete as per the directions of the Engineer-in-Charge. 15 mm nominal bore

Providing and fixing CP Brass 32 mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.

Providing and fixing of 6 mm thick beveled edge mirror of superior glass (of approved make and quality), frame less fixed with SS studs etc inclusive of all materials, labours, tools, tackles, consumables etc all complete as directed by the Engineer-in-charge.

Providing and fixing chrome plated brass liquid soap dispenser of approved quality with all necessary accessories and hardware like chrome plated brass wall flange, screws, rawl plug including drilling holes in walls and making it good etc. complete as per the manufacturer's specifications and as per the directions of the Engineer-in-Charge.

Providing and fixing wall mounted SS 304 Grade Automatic Hand Dryer of approved quality with all necessary accessories, fittings and hardware like SS screws, rawl plug including drilling holes in walls and making it good etc. complete as per the manufacturer's specifications and as per the directions of the Engineer-in-Charge.

Providing and fixing brass stop cock of approved quality : 15 mm nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 15 mm nominal dia Pipes

32 mm nominal dia Pipes

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. Group A Point.

Supplying and fixing of following size medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel PVC conduit as required. 1 X 1.5 sq mm.

2 X 4 sq mm.

Supplying and fixing following size/modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. 6 module (200mm X 75mm)

Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required 5/6 amps switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

LED Panel light 2x2 ft., (System lumen efficacy >135 lm/Watt) Supplying, installation, Testing & Commissioning of Panel light 2x2 ft., of following body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140270 Volt, freq 50/60 hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection,THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free, (flicker should be below 5 %), life time (LED,Driver & electrical circuitry), of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends ,CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate (T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast / Extruded aluminium Body (Thickness ≥ 1.20 mm) 22 Watt

Supply & installation of 10W (approx) LED batten light, 560 mm, Lamp Efficacy (Lumen / Watt),100 complete with all accessories on the wall/ ceiling including connections, earthing etc. as per the instruction and direction of E-I-C.

Supply & installation of 18W (approx) LED batten light, 1150 mm, Lamp Efficacy (Lumen / Watt),100 complete with all accessories on the wall/ ceiling including connections, earthing etc. as per the instruction and direction of E-I-C.

General Note- 1. Contractor shall inspect the site to acquaint with the site condition as welll as security condition at AMD. 2. The rates shall include cost of tools and tackles, manpower including wages, liveries, all wastage and taxes, GST, labour cess, income tax etc, as applicablebut exclusive of EPF & ESI. EPF & ESI are reimbursible as per relevant clause.

GOPE ENTERPRISES (BID ID -3241645)