SPL REPAIR TO OR GOVT MD ACCN QTR NO 51/1, 51/2, 51/3 AND 51/4 LOCATED AT GOLE KI MANDIR, GWALIOR.

Demolition of cement concrete of any description and in any position (un-reinforced) in ground floors and paving not exceeding 15cm thick (below or above GL) complete all as specified and directed. Note: Rate is inclusive of removing demolished material out of MoD Land.

Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) complete all as specified and directed. Note: Rate is inclusive of removing demolished material out of MoD Land.

Dismantiling of stone slabs and tiles of any description or any thickness in floors, aprons, skirting, dado etc. laid bedded and pointed in any mortar complete all as specified and directed. Note: Rate is inclusive of removing demolished material out of MoD Land.

M&L for joint free non skid ceramic coloured tiles 7mm to 8 mm thick (Square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and including 15 mm thick cement screed in (1:6) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.

M&L for non skid ceramic tiles, joint free, coloured tiles 7mm to 8 mm mm thick as in skirting fixed over and including 10 mm thick cement screed in (1:4) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.with the colour of tiles complete all as specified and directed.

M&L for glazed cearmic tiles, coloured tiles 450x350x 7 to 8 mm thick, designer pattern tiles, on vertical faces ie. as in skirting/dado etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles fix over and including 10 mm thick backing coat in cement mortar (1:4) complete all as specified and directed.

M&L for machine cut Kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing, over and including screed bed or bedding layer of mortar 20 mm thick in cement mortar (1:6 ) complete all as specified and directed.

M&L for machine cut kota stone slab 20 - 25 mm thick as in riser / steps, skirting, dado,cills and pillars laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and polishing over and including 10 mm thick backing coat in CM (1:4) complete all as specified and directed.

M&L for Granite slab 18 to 20 mm thick machine cut, bedded and joined with cement and pointed with white cement (1:2) using marble dust with admixture of pigment to match over and including 20 mm thick screed bed CM (1:3) the shade of granite stone including cutting and polishing type as in cill and jamb/skirting, steps cooking plateforms includigng rounding off the exposed edges and polishing all as specified and directed.

M&L for PCC (1:3:6) Type C2 using 40mm graded stone aggregate, 50mm thick as in floor finishes surface even and fair without using extra cement complete all as specified and as directed

Applying the non shrink high mechanical strength properties epoxy based mortar @ 5kg/RM forming 'gola' on all corner joints of wall, chajja, facade any other similar places to prevent the capillary formation from wall to roof area; by three component system comprising of base, hardener and quartz filler having ER Base and Hardener with Quartz filler etc complete all as specified & directed

Taking down of old roof treatment of any description including mud phushka, concrete padding, all kind of tiles, cement plaster from roof surfaces (of any thickness) etc including cleaning, brushing and watering to joints and grooves and throwing the same to a distance exc. 250 mtr and not exc 500 mtr from the roof etc complete all as specified and directed. Note: Rate is inclusive of removing demolished material out of MoD Land.

M&L for PCC (1:2:4) Type B-0 using 12.5 mm graded stone aggregate as in roof padding/ levelling finish even and smooth etc complete all as specified & directed.

M & L for applying Smartcare Damp proof, a fibre reinforced elastomeric liquid water proofing membrane formulated with reinforcing acrylic fibers having Sun Reflectivity Index (SRI) of 105 on horizontal/vertical surfaces of roof/wall/chajjas in multiple coats @2.0 litre/sqm. Primary coat is self-priming coat of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1, damp proof: water) and other coats to be applied undiluted. (ii) The undiluted 2nd & 3rd coatings needs to be reinforced with 40 GSM geotextile to be sandwiched between them. (iii) After that final 4th coating shall be applied. The application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes complete in all respect as per the direction of Engineer-in-Charge. Make: SmartCare Damp Proof of Asian Paints or equivalent in Berger and Nerolac. Notes:- (a) The work shall be executed through authorised applicator of manufacturer only. (b) Authrised Applicator shall be approved by GE before starting of work. (c) All materials shall be procured directly form manufacturer. (d) The contractor shall furnish a written guarantee for the effectiveness of the water proofing treatment for a period of Eight years in favour of GE.

M&L for Providing cement concrete type B1 1:2:4 using 20 mm graded aggregate in roof kerbs or mud stops, rounded or chamfered on edges or water tank staging, coping etc finished even and smooth complete all as specified and directed.

M&L precast cement concrete tiles of size 250mmx250mmx20mm, machine pressed as in floor top , comfirming to IS -1237-1980 laid over 15mm thick screed bed in CM 1:4 and set, jointed and pointed in neat cement slurry in floors and cut and polished, with white cement and pigment with cement mortar (1:2) by mixing of chemical or equivalent complete all as specifeid and as directed by Engr-in-Charge.

Demolition of brick work /stone work built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed. Note: Rate is inclusive of removing demolished material out of MoD Land.

M&L for Brick work with sub class B bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:6).complete all as specified and as directed.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4).complete all as specified and as directed.

M&L for PCC type B-1 (1:2:4) using 20mm graded stone aggregate as in coping, in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, staging, slightly rounded or chamfered on edges, angles, kerbs and throating in roof as directed complete all as specified and directed by Engineer in charge.

M&L for 75mm thick PCC (1:3:6) Type C2 using 40mm graded stone aggregate as in plinth protection/hard standing and floor finishes surface even and fair without using extra cement complete all as specified and as diected

M&L for Forming Construction joint 30mm deepx10mm wide filled with sealing compound grade A complete all as specified and as diected.

M&L for Priming surfaces and applying normal treatment (for moderate conditions) using glass fibre base bitumen felt, grade 2 in sunken floor surfaces complete all as specified & directed.

M&L for PCC type C0 1:3:6 (12.5mm graded stone aggreagte) in floors complete all as specified & directed.

M&L for 20 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surface and mixed with WPC finished even and smooth without using extra cement complete all as specified & directed.

Supply only liquid water proofing compound @ 200ml per 50 kg bag of cement. Make: Sika, Pidilite, Fosroc

M&L for applying bonding agent for bonding old to new concrete surface likes chajja/ beam/ceiling/slab/facia etc by high performance modified Styene- Butadiene Rubber (SSR) base binder. Applying of binder is as 10 Sqm/ per lits etc complete all as specified & directed.

M&L for applying 25 mm thick (average) repair mortar ready to use single component polymer modified repair mortar for repair of RCC members likes beams, columns, chajja and facia/ ceiling, mortar having good compressive strength and shrikage resistance etc complete all as specified & directed.

M&L for PCC type E2 (1:5:10) with 40mm graded brick aggregate as in filling of sunken floors complete all as specified and directed.

M&L for 75mm thick PCC type B1 (1:2:4) (20mm graded aggregate) in floors complete all as specified & directed.

Taking down cement or cement lime plaster on brick or stone walls etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed. Note: Rate is inclusive of removing demolished material out of MoD Land.

M&L for 15 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces, mixed with water proofing compound finished even and smooth without using extra cement complete all as specified and directed. Note : (i) The quoted rate is inclusive of necessary scaffolding works. (ii) WPC shall be measured and paid seperately.

M&L for 5mm thick rendering (1:3) on fair faces of brick work or concrete surfaces of ceiling/chajja/fascia etc finished even and smoth without using extre cement complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper, over and incl a layer of 2mm thick wall care putty to get even and smooth level finish on new plastered surface of internal wall, complete all as specified and as directed.

M&L for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete, colour of paint as approved by Engr-in-charge, complete all as specified and directed.

M&L for complete removal of existing treatment of plastered or unplastered surfaces walls and applying two coat of oil bound distemper over a coat of 2mm thick wall care putty on walls complete all as specified and directed by Engineer -in-Charge.

M&L for complete removal of existing treatment of plastered or unplastered surfaces of ceiling and applying two coat of white wash complete all as specified and directed by Engineer -in-Charge.

M&L for complete removal of existing treatment of surfaces of walls of plastered or unplastered surfaces and applying two coat of cement base paint complete all as specified and directed by Engineer -in-Charge.

Taking down chowkhat or frame (without taking off shutter from the frame) not exceeding 1.5 Square metre each complete all as specified and as directed.

Taking down chowkhat or frame (without taking off shutter from the frame) exceeding 1.5 sqm and not exc 4.00 sqm each complete all as specified and as directed.

S&F Pressed steel frames 105x60mmfor doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete, as specified, supplied and fixed.

S&F Pressed steel frames 125x60mmfor doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete, as specified, supplied and fixed.

M&L for PCC 1:3:6 type C-0 (using 12.5 mm graded stone aggregate) for filling in hollow section of pressed steel frames and like complete all as specified and directed.

S&F of Plain framed, 35mm thick panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

M & L for 35 mm thick glazed and skeleton factory made shutters of 2nd class Hard Wood, open rebated and prepare to receive glass, guage etc (without sash bars) edges of framing plain chamfered or rounded, fitted with moulded beads both sides for securing glass etc, size of members of shutters as specified complete all as specified and directed.

Supply & Fixing solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube fixed in opening as per specification & drawings complete all as specified and as directed.

S &F for factory made solid panel PVC door shutter 30mm thick (style) consisting to frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Penelling of plain colour PVC sheet to be fitted in the MS. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and as directed.

M & L for Powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors , windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

M & L for Powder coated Anodised aluminium window and ventilator shutters, (adquate track, three tracks), aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F for framed work such as grills gratings, etc, with ends of bars shouldered and or riveted , or forged into spikes, framed guard bars , barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290 GDE -165, complete all as specified and directed.

S&F of 4mm thick tinted glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane, fixed to UPVC/aluminum or any kind of frame with and including suitable rubber beading complete all as specified and directed

S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete allas specified and directed.

M&L for preparation of new steel surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L preperation of new wooden surface and applying two coat of synthetic enamel paint over a coat of pink primer on new wooden surface any description not otherwise described over 10 cm width or girth and complete all as specified and directed.

S&F of 100 mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, medium weight complete all as specified and directed.

S&F of 200mm long aluminium anodised, barrel tower bolt of extruded section and fixed complete all as specified and directed.

S&F of 150 mm size Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F of Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F of 150 mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed

S&F of Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F in repairs 25mm dia stainless steel curtain rod not less than 0.80mm thick including sufficient fixing SS brackets & decorative end Knobs, 10 Nos SS rings in one Rmtr (minium 2 Nos at every 1.50m length or for every separate piece of rod fixed) complete, design as specified and directed by Engr in Charge.

Dismantling boarding any description fixed with nails in any position (including cup board/ wardrobe shutters/shelves upto 25mm thick) complete.

S&F of 18 mm thick PVC Celuka ply of both side prelaminated and other side plain white colour fixed with SS screws/ sealant/ solvent cement /adehesive for cabinet boxex and shitters purpose including cutting , joining, fixing glass etc & marking good complete, colour and pattern as specified and approved by Engr-in-Charge. Make : Rajshri/ Black Cobra/ Sintex/ Durplast/ Alex. Note : Glass for cabinets will be measured and paid seperately as supply only item.

S&F of 12 mm thick PVC Celuka ply of both side prelaminated and other side plain white colour fixed with SS screws/ sealant/ solvent cement /adehesive for cabinet boxex and shitters purpose including cutting , joining, fixing glass etc & marking good complete, colour and pattern as specified and approved by Engr-in-Charge. Make : Rajshri/ Black Cobra/ Sintex/ Durplast/ Alex. Note : Glass for cabinets will be measured and paid seperately as supply only item.

S&F of 30mm width of flaps (when open) Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed

S&F of 150mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed

S&F of 125 mm size Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F of heavy duty stainless steel magnatic door catcher and striking plate, including fixed with SS screw, complete all as specified and directed.

S&F in repair plate rack of size 900mmx750mm made out of 1mm thick stainless steel sheet of 304 AISI grade of wire type / sheet pattern size and type as directed and approved by GE fixed to wall with necessary SS screws/plugs/brackets etc fitting arrangement Complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing or removing to store of 15mm bore of pipe, complete all as specified.

Taking up or down steel tubing and connections including cleaning for refixing or removing to store of 20mm bore of pipe, complete all as specified.

Supply and laying of 20mm dia of bore CPVC pipe SDR-11 and plain CPVC SDR-11 fittings (ISI) marked, concealed or fixed to wall or laid in floors complete all as specified.

Supply and laying of 25mm dia of bore CPVC pipe SDR-11 and plain CPVC SDR-11 fittings (ISI) marked, concealed or fixed to wall or laid in floors complete all as specified.

Supply and laying of 16mm dia of bore CPVC pipe SDR-11 and plain CPVC SDR-11 fittings (ISI) marked, concealed or fixed to wall or laid in floors complete all as specified.

Dismantling of water tanks exc 250 ltr and n.exc 500 ltr capacity and removing from site complete all as specified and as directed.

S&F Rotational moulded polyethylene multilayer water storage tanks (cylinderical vertical with closed top) 500 litres capacity, triple layer in construction white in colour hoisted and fixed in position complete all as specified and as directed by Engr-in-Charge.

S&F in repairs for 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed in 20mm dia pipe. (Minimum weight 15mm-142gms, 20mm-210gms, 25mm-455gms, 40mm-690gms) complete all as specified and directed.

S&F in repairs for gun metal globe/gate valve with iron wheel head screwed both ends for iron pipe of 25mm bore complete all as specified and directed.

S&F in repairs for vitreous china squatting pan, orissa pattern sise 580x440mm white with integral foot rest (excluding flushing cistern) including vitreous china ‘P’ or ‘S’ traps and connection to trap and to flushing pipe to complete and making good to floor, complete all as specified and directed.

S&F in repair for PVC valveless syphonic action type flushing cistern low level white with inlet ball valve, float end handle handle including bracket complete of capacity 10 litres, complete all as specified and directed.

S&F in repair flush pipe fixed to pedestal pan, incl all joints, of polythylene of low or high denisity or PVC 32 mm dia for low level cistern complete

S&F for in repairs 15mm angle cock chromium plated,cast copper alloy, with capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe fixed and complete all as specified .

S&F in repairs for shower rose brass chromium plated without swivel joints, 100 mm in size including fixing to steel pipe complete all as specified and directed fixed in repairs, complete all as specified and directed.

S&F for in repairs of vitreous china wash basin, white, flat back, size 550 x 400mm excluding taps, waste, chain and plug and porcelain stopper but including cutting for and pinning in ends of and including brackets complete all as specified and directed. Make : PRAYAG/ PARRYWARE/CERA /HINDWARE/ JAQUAR

S&F for in repairs waste coupling fittings , brass chromium plated for glazed ware sinks ,basins ,etc.with long screwed shanks and fly nuts ,flange end bedded in red lead cement and other fixed 32 mm dia bore complete all as specified.

S&F for in repairs waste coupling fittings , brass chromium plated for glazed ware sinks ,basins ,etc.with long screwed shanks and fly nuts ,flange end bedded in red lead cement and other fixed 40 mm dia bore complete all as specified.

S&F in repairs 32mm dia ribbed PVC waste drain pipe for WHB, urinal etc, strached length 90cm with PVC coupling socket complete all as specified and directed

S&F in repair for 15mm dia PVC connection with PTMT nuts of length 600 mm, heavy duty, steel wire mesh coated complete all as specified and directed.

S&F for in repairs mild steel Chromium plated grating 100 mm dia, fixed in repairs to Nahani traps, complete all as specified and directed.

S&F for in repairs for 15mm, bib tap Fancy type long body chromium plated,cast copper alloy, with capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe complete all as specified

S&F for in reairs PVC bath room cabinet mirror of Size 500mmx400 mm make Prayag Cat No 556 or euivelent in other makecomplete all as specified and directed.by Engineer in charge.

S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick glass shelf 12cm wide with chromium plated bracket and guard and railing 60cm long completed all as specified and directed

S&F in repairs corner glass shelf 300mm (with ABS Bracket ) complete all as specified and directed.

S&F in repairs Soap dish of CP fixed with pvc rawal plugs and screw, complete all as specified and directed.

S&F in repair brass cromium plated tubular towel rail D type 20mm dia and 60cm long complete all as specified and directed.

S&F of Aluminium peg set of solid body 125mm to 175mm fixed to wall with PVC plugs and screw, complete all as specified and directed.

S&F in repairs for wall mixer with Three in one pattern in of brass CP, 15mm dia with telephonic shower hose with hand shower complete all as specified and directed. Make :Neptune series of Prayag or similar in PARRYWARE/CERA /JAQUAR/HINDWARE.

S&F in repairs Brass CP WHB mixer for mixing hot & cold water screwed down for 15mm bore iron pipe complete all as specified. MAKE : Neptune series of Prayag or similar in PARRYWARE/CERA /JAQUAR/HINDWARE

Taking down eaves gutters and rain water pipes (any size 75mm to 110mm of any pattern) of any description and in any position including all fittings, heads, shoes, bend, swan necks etc (measured overall as fixed along the centre line over fittings and accessories) complete all as specified

S&F for 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified

S&F for 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified

S&F for 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified

S&F for 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified

S&F for 110mm dia PVC (SWR) pipe bends any radious complete all as specified and directed.

S&F for 75mm dia PVC (SWR) pipe bends any radious complete all as specified and directed.

S&F for 110mm dia PVC (SWR) pipes junction single (single T/Y) equal or unequal any radious with access door complete all as specified.

S&F for SWR bends 75mm provided with access door complete all as specified.

S&F for 110mm dia PVC (SWR) vent cowl complete all as specified.

S&F Stack clamps made out of 50 mm by 5 mm flat iron and 16 mm dia around iron stays including bolt and nuts for securing ends of stays to walls or roofs, bore pipe 100 mm dia pipe complete all as directed.

S&F Stack clamps made out of 50 mm by 5 mm flat iron and 16 mm dia around iron stays including bolt and nuts for securing ends of stays to walls or roofs, bore pipe 75 mm dia pipe complete all as directed.

M&L for PVC (SWR) gully trap 125 /100 plain with grating incl. jointing with solvent cement as in repair, complete all as specified and directed.

M&L for Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified

M&L for Hard core of gauge n exc. 63 mm deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L for PCC (1:3:6) Type C-2 (40mm graded aggregate), 75 mm thick as floor surfaces concrete complete all as specified and directed.

M&L for chequered cement concrete tiles of size 20cmx20cmx25 mm thick, with grey cement and pigment, set, jointed and pointed in neat cement slurry over and including 20 mm thick screed bed in cm (1:6) complete all as specified and directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed .

Material and labour for machine made, 1st quality, precast cement concrete rubber moulded coloured interlocking paver blocks / tiles , 60mm thick of grade M-35, of any shape or shap and designe as approved, with colour pigment , laid over sand cusion fixed as in floors/ paths/ pavings etc, complete all as specified and directed.Note : Sand Cusion shall be measured and paid in separate item.

M&L for providing and fixing welded MS wire mesh weight not less than @ 1Kg/Sqm and applying anti- corrosion primer single component, cementitious inhibiting primer in two layers on observed surfaces of wall, chajja, fascia, facade or any other members building where required etc to create thickness not less than 1mm using Protezione Ferro Mono of make Tharmax or equivalent in make Fosroc/Sika and applying 25mm thick one component, thixotropic fiber reinforced polymer modified dual shrinkage compensated, cementitious patch repair mortar Renotroc SP & O conplast WL Extra of make fosroc or equivalent in make Tharmax/Sika in W/P ratio 0.16 mixed with liquid water proofing admixture of make Fosroc or equivalent in make Fosroc/Sika confirming to IS:2645-2003 make Tharmax/Sika to be applied on the surface before plastering and as per recommendation of manufacturer complete all as specified and directed.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) any description and in any position not otherwise specifically provided for complete all as specified and directed. Note: Rate is inclusive of removing demolished material out of MoD Land.

M&L for reinforced cement concrete Design mix M-20 ( using 20 mm graded stone aggregate ) as in chajja/fascia/balcony slab like etc. complete all as specified and directed.

M&L use and waste formwork to chullah hoods, chajjas, troughs and similar items including edges of concrete rough finished surfaces of concrete complete all as specified and directed

M&L for mild steel TMT bars, 10mm dia and over, cut to length bent to shape required including cranking bending spirally for hoping for coloumns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed.

M&L for mild steel TMT bars, 6 mm to 8 mm dia over, cut to length bent to shape required including cranking bending spirally for hoping for coloumns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed.

S&F of Joist, channel, angle, or tee sections, fixed independently without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) confirming to Fe-290 (Gde E165) cleats etc fixed to RCC member/wall/stone masonry or any other building members etc. complete all as directed by Engineer-in-charge.

Taking down carefully existing aluminum / copper point wiring (light, fan, socket or power point etc) complete of any description including fitting such as switches, ceiling roses, pendants, tube light fitting, ceiling fan with regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc to match with existing surfaces complete all as specified and directed.

Taking down ceiling fan of any sweep,removing blades, cleaning the fan completely of dust and dirt and Re-hanging the same back to its original positions including connecting with three core flexible copper wire to ceiling rose etc after the completion of the point wiring including replacement of old unserviceable fan hook rubber pad, nut bolts and washers etc, complete all as specified and as directed by Engr-in-charge.

Taking down submain wiring of any size any type and in any position metalic/non metallic PVC conduit of wooden batten complete all as specified and directed.

Taking down unserviceable Sheet metal box & MCB DB SPN with MCB's of any make/capacity, complete, all as specified and directed by Engr-In-Charge.

Taking down unserviceable TPN DB /meter distribution box with MCB's of any make/capacity, complete, all as specified and directed by Engr-In-Charge.

M&L, concealed point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH confirming to IS 694:2010 having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional area (ISI marked with valid CML No) drawn in and including concealed non metallic rigid PVC conduit medium grade( ISI marked with valid CML No) not less than 20 mm dia with all fitting and fixing accessories and 1.5 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to common earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxes factory made for mounting switch, regulators etc with and including 2.8 mm thick plastic laminated sheet cover (white) ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint inside for mounting switches. sockets etc complete.

One light point controlled by one switch.

One Ceiling fan point controlled by one switch.

One Exhaust fan point controlled by one switch.

One 5 pin multipurpose socket out let 5/6 Amps on the same board with other switch.

One 3 pin/5 pin switch socket outlet, 5 Amps on independent board.

One Bell/Buzzer point controlled by one way 5 Amp push button switch.

One light point controlled by 2 x two way switch

Description all as per item No 137 here in before but point wiring with 2.5 sqmm FRLSH H confirming to IS 694:2010, multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 sqmm FRLSH PVC insulated multi strand copper conductor cable as continous earth wire.

S&F Modular switch 1 way 6 A,1 module complete all as specified and directed.

S&F Modular Socket, 6A - 2/3 pin combined 2 module,complete all as specified and directed.

S&F Modular switch 1 way 16 A,1 module complete all as specified and directed.

S&F Modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed.

S&F Modular switch 2 way ,6 A,1 module complete all as specified and directed.

S&F Modular ceiling rose surface bakelite 63.5 mm dia three terminal complete all as specified and directed.

S&F Modular Fan step regulator, 120W - 2 module 240 volts, AC 50Hz complete all as specified and directed.

S& F Modular Ac box with plug and 20 Amp mini MCB complete all as specified and directed.

S&F Buzzer Ding Dong, AC, 230 Volts, single pole complete all as specified and directed.

S&F Modular Bell push ,6A ,1 module complete all as specified and directed.

S&F Modular Lamp holder with metal ring, PVC/Polycarbonate type with back plate suitable for batten fittings ISI Marked complete.

S&F LED Lamp 09/10 watt complete with 5 star rating complete all as specified and directed.

M&L, sub main wiring with two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 4 sqmm size drawn in and including non metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 25 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 4 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. (NOTE: (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface.

M&L, sub main wiring with two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 6 sqmm size drawn in and including non metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 25 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 4 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. (NOTE: (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface.

S&F Decorative ultra slim LED Tubelight fitting of LED with extruded polycarbonate, enviormental friendly energy efficient ready to use, 20 watt,4000k to 6500K as per required fitting incluing reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor for electrical connection from ceiling rose to connector of LED fitting including testing on completion all as specified and directed.

S & F security light fittings better optics for uniform distribution IP 65 protection LED of 30 watt with Photometric sensor outdoor type 220-240 volt ambient light <5-15 lux working temparature -20~+40C working humidity <93% RH along with pvc connection of 6 to 10 amp capacity , Heat resistance glass, pressure die cast aluminium housing including 25mm dia galvanised iron pipe light grade bracket bent to shape over all length 0.60mtr fixed to wall with 02 Nos FI clamps made of 40 x 5 mm FI, 15 cm long, 8 mm dia bolts and nuts with washers grouted in wall complete including reqd length of 1.5 Sqmm PVC multistranded BIS marked, 03 core copper conductor for connection from ceiling rose to light fittings incl testing on completion all as specified and directed.

Supply, install, commissioning and installation of distribution meter box indoor type, factory made out of CRCA sheet 2mm thick complete with inside, outside powder coated independed housing for meters with transperent glass & rubber gasket packing with suitable size copper single/ two core wire for each control, cable gland, with 200 Amp rated TPN aluminium busbar (for outgoing) duly insulated (including self insulated) maintaining proper space for each busbar and grouting panel in wall etc complete including self closing locking arrangement and comprising for following fittings (i) MCCB FP, 63 Amps ,16 KA - 01 No (For incoming) (ii) Amp Meter (0-100 Amp)- 01 Nos (iii) Volts Meter (0-500 Volts ) - 01 No (iv) Indicator Lamp set of three R,Y,B - 01 Set (v) ASS & VSS with CTs -02 Nos ( 01 Each) (vi) MCB SP 40 Amps, 230 volts - 05 Nos (For outgoing) (vii) Nutral bus bar link mounted on insulator (viii) Place for fixing the energy meter. - 04 Nos (ix) The quoted rate is inclusive of removing the existing electric meter from the building and re fixing the same in the sheet metal enclosure at the same location without any damage to the meter. Note;- (i) Cable entry gland made of polycarbonate of appropriated size shall be provided in each cable / wire entry as per IS standered. (ii) All internal wiring inside the panel used for metring purpose shall be PVC insulated FRLSH, ISI marked of size not less than 1.5 Sqmm.

S&F MCB DB, sheet metal enclosures double door SPN 8 way with bus bar 240 volts 2 in 1 shutter type (METAL DOOR) type with blanking plates where required and IP 43 degree protection complete all as specified and directed.

S&F, MCB SPN 40 to 63 Amps, 240 volts 'C' series 16 KA ,including connection with suitable size copper lugs complete all as specified and directed.

S&F, MCB SP 6 to 32 amp 240 volts, 40 Amps, 'C' series 10 KA including connection with suitable size copper lugs. complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, copper winding, 230 V, 1400 mm sweep. Min air delivery 245 CFM with service value 6.00 BEE, 5 star rated with brushless direct current motor (BLDC) completion all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m all as per specified and directed.

Supply & fix Heavy duty exhaust fans metal body AC single phase 230/ 240 V of size 300 mm sweep copper winding with louve completion all as specified and directed.

Supplying, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armured electric power cable (Heavy duty ) with aluminium conductor 1100 volts grade, cross sectional area size 35 Sqmm 3.5 Core.

Excavation in trenches n exc. 1.5 m wide and n' exc. 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

Returning, filling of excavated soil, including spreading leveling, watering and well ramming in layers, not exceeding 25cm complete all as specified and directed.

Removing of surplus soil to a distance n exc 50 m and depositing where directed at a level n exc 1.5m above the starting point complete.

Sand filling in trenches with clean dry unwashed sand free from sharp particles, gently punning around the cables complete.

Supplying and laying un reinforced precast concrete cable cover Class LV, Type I, flat size 250mm x 150mm x 40mm complete all as specified and directed.

S&F tube 'Light' grade galvanised with all fitting laid in trenches, fixed to wall and floor of 50 mm dia for cable protection complete all as specified and directed.

Supply and fix cable jointing kit for 1.1 KV grade cable for end joint complete with Jointing material heat Shrink type and accessories suitable for 3 ½ / 4 core XLPE, armoured, Al conductor cable of size 25 to 50 sqmm,Indoor/Outdoor type.

Taking out old u/s pipe line alongwith fittings from existing connections of size 25 mm dia complete all as specifies and directed.

Taking out old u/s pipe line alongwith fittings from existing connections of size 20 mm dia complete all as specifies and directed.

M & L for GI pipe Med grade of 25 mm dia alongwith all fittings and fixtures complete laid in trenches all as specified and directed.

M & L for GI pipe Med grade of 20 mm dia alongwith all fittings and fixtures complete laid in trenches all as specified and directed.

S&F 25 mm Brass Gate Valve cofiorming to IS 14846/2000,ISI Mark MS Spindle and iron wheel head with both ends flanged with new rubber gasket,bolts and nuts including dismantling of old u/s Gate valve fixed at any location of size 25 mmm dia all as specified and directed.

S&F 20 mm Brass Gate Valve cofiorming to IS 14846/2000,ISI Mark MS Spindle and iron wheel head with both ends flanged with new rubber gasket,bolts and nuts including dismantling of old u/s Gate valve fixed at any location of size 20 mm dia all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 6 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test. Testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded BT stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, internal surface of concrete shall be given 10mm thick plaster in CM 1:4, pre cast RCC (1:2:4) type B-1 (using 20mm graded BT stone aggregate) 40mm thick cover, reinforced with 8mm dia deformed or TMT bars 3 Nos both way with 12 mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI medium grade earth lead protection pipe including provn of earth test point made of 50 x 5 mm MS Flat in 'D' shape 500 mm legth grouted in wall complete 01 x 6 mm multistrand PVC insulated copper conductor ( Green Colour) to be provided from test point to DB through 20 mm dia concealed non metallic conduit complete all as specified and directed as per MES Schedule Part I & II.

S&F for modular decorative plate and provising of new modular plate of different size including fixing ,the existing modular switchs , modular socket ,modular regulator and refixing them in new board

White cover plate with frame but 2/3/4 module

White cover plate with frame but 6/8/12 module