Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹90.1 LAdmitted-Finance | L1 | Admitted-Finance | |
| 2 | L2₹96.0 L+₹5.9 L (6.56%)Admitted-Finance | L2 | Admitted-Finance | |
| 3 | L3₹97.6 L+₹7.5 L (8.34%)Admitted-Finance | L3 | Admitted-Finance | |
| 4 | Rejected-Technical 6 VISHNU SHREYA COMPLEX PLOT NO 87 87 A SECTOR 50 E OFF PALM BEACH ROAD SEAWOODS NERUL WEST NAVI MUMBAI 400706 | THANE | MAHARASHTRA | 400706 | - | Rejected-Technical Technically Disqualified | |
| 5 | Rejected-Technical NORTH SITE TROMBAY MUMBAI 400 085 | MUMBAI SUBURBAN | MAHARASHTRA | 400085 | - | Rejected-Technical Technically Disqualified |
| Sl No | Description | Qty | Unit | HIGH PARRA CONSTRUCTION PRIVATE LIMITED L2 | B G CONSTRUCTIONS L1 | M/s. Tanay Infrastructures Limited L3 |
|---|---|---|---|---|---|---|
| 1.00Piping in the pump house (aboveground) : SITC of SS 304 External Polished & Buffed Pipe Conforming to (ASTM A312) , Heavy Class, Upto 150 NB Schedule 10. above 200NB Schedule 40 including fitting, elbows, tees, reducers, painting, support, nuts, bolts, washers, gaskets etc as required with Argon Gas Welding and Welding Electrodes as per tender requirements, All Pipes shall be despatched with End caps, Test Certificates without any damage. Cost shall include DP test for every welded joint , Hydro test and with all material required for these tests. | ||||||
| 2.00 | 150 mm dia. | 768 | Rmt | 6,300 ₹48,38,400 | 5,000 ₹38,40,000 Lowest | 6,666 ₹51,19,488 |
| 3.00 | 80 mm dia. | 50 | Rmt | 3,300 ₹1,65,000 Lowest | 3,600 ₹1,80,000 | 3,666 ₹1,83,300 |
| 4.00Piping ( under ground) : SITC of SS 304 External Polished & Buffed Pipe Conforming to (ASTM A312), Heavy Class with wrapping coating, inserting in NP3 Hume pipes with required 45 degree elbow and performing for every welded joint and entire pipe length DP test, Holiday Test, Hydro Test, with all materials necessary for the test Upto 150 NB Schedule 10. above 200NB Schedule 40 including fitting, elbows, tees, reducers, painting, support, nuts, bolts, washers, gaskets etc as required with Argon Gas Welding and Welding Electrodes as per tender requirements, Al Pipes shall be despatched with End caps, Anticorrosive wrapping & coating as per IS 1standards 1/3rd overlap with 150mm wide and 4mm THICK TAPE. | ||||||
| 5.00 | 150mm dia. | 200 | Rmt | 6,500 ₹13,00,000 | 4,800 ₹9,60,000 Lowest | 6,666 ₹13,33,200 |
| 6.00SITC of Cast Steel (may include SS 304 component) Gate Valves with flanged ends with matching companion flages as per API 600, Class 150 , PN 20 rating OS & Y Type Raising Stem type Gate Valve , Maximum Working Pressure 300 psi, Hydrostatic pressure 600psi for Potable Water Service, Refer Datasheet for detailed specifications | ||||||
| 7.00 | 150mm dia. | 6 | Nos | 17,500 ₹1,05,000 | 34,000 ₹2,04,000 | 15,555 ₹93,330 Lowest |
| 8.00 | 80mm dia. | 5 | Nos | 7,000 ₹35,000 | 17,500 ₹87,500 | 6,989 ₹34,945 Lowest |
| 9.00SITC of Cast Steel (may include SS 304 component) Check Valve as per BS 1868 with flanged ends with matching companion flanges, Class 150 , PN 20 rating , Maximum Working Pressure 300 psi, Hydrostatic pressure 30 bar for Potable Water Service, Glycerin filled SS 316 Gauge shall be provided on either side of strainer to know if strainer is blocked Refer Datasheet for detailed specifications | ||||||
| 10.00 | 150 mm dia | 1 | Nos | 9,500 ₹9,500 | 25,000 ₹25,000 | 9,455 ₹9,455 Lowest |
Tender Value
₹1.0 Cr
EMD Value
₹2.0 L
Closing Date
16 Oct 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
DIRECTOR TMC
Office of Engineering services, Second Floor,Khanolkar Shodhika , ACTREC Kharghar Node, Navi Mumbai - 410210
Expansion of Distribution System for Domestic water supply in ACTREC
2023_TMC_773871_1
ET-48/Domestic water line/2023
Open Tender
Civil Works
Item Rate
180 days
ACTREC-Kharghar
As per Tender Document
2 documents required · 2 mandatory
₹0
₹2.0 L
Yes
ACTREC, KHARGHAR
26 Feb 2024
28 Sept 2023
17 Oct 2023
28 Sept 2023
16 Oct 2023
28 Sept 2023
28 Sept 2023 - 6 Oct 2023
9 Oct 2023
Amount
Piping in the pump house (aboveground) : SITC of SS 304 External Polished & Buffed Pipe Conforming to (ASTM A312) , Heavy Class, Upto 150 NB Schedule 10. above 200NB Schedule 40 including fitting, elbows, tees, reducers, painting, support, nuts, bolts, washers, gaskets etc as required with Argon Gas Welding and Welding Electrodes as per tender requirements, All Pipes shall be despatched with End caps, Test Certificates without any damage. Cost shall include DP test for every welded joint , Hydro test and with all material required for these tests.
150 mm dia.
80 mm dia.
Piping ( under ground) : SITC of SS 304 External Polished & Buffed Pipe Conforming to (ASTM A312), Heavy Class with wrapping coating, inserting in NP3 Hume pipes with required 45 degree elbow and performing for every welded joint and entire pipe length DP test, Holiday Test, Hydro Test, with all materials necessary for the test Upto 150 NB Schedule 10. above 200NB Schedule 40 including fitting, elbows, tees, reducers, painting, support, nuts, bolts, washers, gaskets etc as required with Argon Gas Welding and Welding Electrodes as per tender requirements, Al Pipes shall be despatched with End caps, Anticorrosive wrapping & coating as per IS 1standards 1/3rd overlap with 150mm wide and 4mm THICK TAPE.
150mm dia.
SITC of Cast Steel (may include SS 304 component) Gate Valves with flanged ends with matching companion flages as per API 600, Class 150 , PN 20 rating OS & Y Type Raising Stem type Gate Valve , Maximum Working Pressure 300 psi, Hydrostatic pressure 600psi for Potable Water Service, Refer Datasheet for detailed specifications
150mm dia.
80mm dia.
SITC of Cast Steel (may include SS 304 component) Check Valve as per BS 1868 with flanged ends with matching companion flanges, Class 150 , PN 20 rating , Maximum Working Pressure 300 psi, Hydrostatic pressure 30 bar for Potable Water Service, Glycerin filled SS 316 Gauge shall be provided on either side of strainer to know if strainer is blocked Refer Datasheet for detailed specifications
150 mm dia
80 mm dia
SITC of Cast Steel (may include SS 304 component) Y Type strainer with flanged ends with matching companion flanges, Class 150 , PN 20 rating , Maximum Working Pressure 300 psi, Hydrostatic pressure 30 bar for Potable Water Service, Shall have SS 304 Mesh of 1.5 mm hloles and mesh shall be removable and cleanable. Refer Datasheet for detailed specifications
150 mm dia
80 mm dia
SS 304, Ball Typ Non return valve with matching flanges , PN 20 rating, fittings, nuts, bolts, washers etc.,
150 mm dia.
SS Pressure Reducing Valves with Adjustable pressure range from 2 - 16 Bar, pressure gauge to be provided with adjustable range control Make: Vanaz, Claval, Newage
SITC of Crash Guard for Road side Tapping Point s 6 Inch Pipe in Parking area
GI Supports including angle, channel, beam, special fitting, plates & clamps required to support the pipe, skid on risers
SITC of 150mm SS 316 Glycerin filled Bourdon type Pressure gauge (150mm dial) with gauge cock - range 0-16 kg/sq.cm(g) for indicating pressure at 6 remote points, Make WIKA, H Guru, Waree
SITC of SS 304 Pressure Relief Valve 6 " Inlet and 1" outlet to regulate pressure on over ground lines ( on 4 corners of the network ) due to water getting heated during summer times, water should not be wasted and should be diverted either to the tank or sumps,
SITC of SS 304 Drain Valves 6 " Inlet and 2 " outlet for maintenance and flushing of domestic line as per locations suggested by ACTREC,
SITC of Providing Blind flanges of 80mm dia. UPVC
SITC of Providing Reducer 80 X 50 mm for UPVC network
RCC Supports: For the Pipe upto 150 mm Dia with all mounting accessories like ISMC GI Channels, SS rod, M16 GI clamps, GI bolts, supporting beams, complete excavation, refilling, soling of 230mm, 100mm PCC, depth upto top of pipe of 750mm and final finishing in RCC on road/hard soil or enclosing with soft soil as required, rates can be renegotiated by ACTREC on size of supports is reduced due to site conditions. GI Supports wherever RCC Supports are not possible ISMC 75 X 40
Providing and laying in position ready mixed M20 grade plain cement concrete, with cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for plain cement concrete work, including pumping of R.M.C. from transit mixer to site of laying and curing, including the cost of centering, scaffolding, shuttering and finishing, including cost of curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineerin-charge. (M15 grade at all locations)
Excavation mechanically (using excavators like JCB /Poclain/with bucket) in all types of soil, including murrum, soft rock for foundations, wall, columns, plinth beams, basement, raft, ducts, trenches, underground sumps, septic tanks, soak well including shoring and strutting, bailing out water/pumping off water if required, removing and stacking or Disposing simultaneously the excavated soil anywhere within the ACTREC Campus and/or spreading soils in layers for site development. All complete as per specification and as directed by the Engineer-in charge. upto 2.5 m Depth.
CONCRETE BREAKING: Breaking of the existing concrete/brickwork by chiselling at all level including scaffolding and staging and the work shall be carried out so as to cause minimum inconvenience to hospital activity including cost of all material, labour, tools etc. carting away the debris out of hospital premises all complete as specified and directed. Rates also includes core cutting in concrete
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete at all levels Thermo-Mechanically Treated bars of grade Fe-500D or more.
SITC of 80mm dia Domestic Wet Riser for Buildings in UPVC , Sch. 40, with all UPVC Fittings , GI Clamps 6mm thick included with saddling, clamping arrangements, with fixing glue Make: Astral, Finolex, Polycab
80mm dia UPVC Ball valves
NP2 class RCC hume pipes with collar complete provided with Inspection Chamber to check water leakage, pipe lengths should be suitable for required individual road width, no pipe length should be left loose during burying of hume pipe underground, adequate support system and packing, shoudl be able to take load bearing of the vehicular movements on the specific road , burial depth 1000mm minimum or as per Civil standards.
450mm dia,thickness 75mm as per IS458 latest edition
SITC of SS 304 double flanged Ball /Butterfly Valve PN-16 rating with matching flanges, fittings, nut, bolts & washers, etc. with motorised actuator provision 230V AC, with Manual Operating Wheel Provision when Actuator has malfunctioned. Actuators - Rotork or equivalent
80mm Dia
HIGH PARRA CONSTRUCTION PRIVATE LIMITED
M/s. Tanay Infrastructures Limited
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.75 MB
DatasheetforPressureReliefValves.pdf
Additional Documents • 0.17 MB
DatasheetforGateValve.pdf
Additional Documents • 0.17 MB
DatasheetforPressureReducingValves.pdf
Additional Documents • 0.17 MB
DatasheetforSSPipes.pdf
Additional Documents • 0.17 MB
DatasheetforSteelYTypeStrainer.pdf
Additional Documents • 0.17 MB
NonReturnValve.pdf
Additional Documents • 0.17 MB
AnnexureForm.xls
Additional Documents • 0.12 MB
BOQ_813507.xls
BOQ • 0.27 MB
TD.pdf
Tender Documents • 1.83 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .