Construction of New Primary School building/Kitchen Shed/Boys Toilet/Girls Toilet at Kundka Zone Inderwal District Kishtwar (6th call)

Amount

Earth work in excavation by manual means over areas(exceeding 30 cm in depth and up to 1.50m depth 1.50 m in width as well as 10 sqm on plan ) , including disposal of excavated earth upto I metre for cutting of edges ,disposal earth to be leveled and neatly dressed.All kinds of soil.

Earth work in excavation by manual means over areas(exceeding 30 cm in depth and up to 1.50m depth 1.50 m in width as well as 10 sqm on plan ) ,including disposal of excavated earth upto I metre for cutting of edges ,disposal earth to be leveled and neatly dressed.All kinds of soil.

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and the like not exceeding 1 Osqm on plan, depth upto 1.5mtr. including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth is to be levelled and neatly dressed in: 60% All kinds of soil and 40% ordinary rock)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering , all works upto plinth level ( 1 : 4 : 8) 1 cement 4 coarse and 8 stone aggregate grade , with 40mm nominal size . Crushed including all lead lift and carriages.

Random Rubble masonry with hard stone from nallah in foundation and plinth including levelling up with cement concrete 1 :6:12 ( 1 Cement: 6 coarse sand : 12 graded stone aggregate 20mm nominal size) at plinth level cement mortar 1:6 (1 Cement: 6 coarse sand) including all lead lift and carriages.

Random Rubble masonry with hard stone from nallah in foundation and plinth including levelling up with cement concrete 1 :6:12 ( 1 Cement: 6 coarse sand : 12 graded stone aggregate 20mm nominal size) at plinth level cement mortar 1:6 (1 Cement: 6 coarse sand) including all lead lift and carriages.

Extra for Stone work in Super structure above plinth level upto floor V level (By manual means) including all lead lift and carriages.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering , all works upto plinth level ( 1 :1.5 : 3 )1 cement 1.5 coasre sand 3 stone aggregate grade , with 20mm nominal size . Crushed

Reinforcement of RCC work in plinth band incl straightening, cutting, bending , placing in position and binding all complete. Thermo Mechanically Treated Barsincluding all lead lift and carriages.

Providing and laying of damp proof course of 40 mm thick with cement concrete 1:2:4 ( 1 cement 2 coarse sand 4 graded stone aggregates),mix with 12.50 mm thick crushed stone aggregates including all lead lift and carriages.

Providing form work for foundation footing bases of column (Plinth band)

Providing form work for foundation footing bases of column

Providing form work for foundation footing bases of column

Providing form work for slab base, beams and lintel band including strutting, propping and removal of form.

Centring and shuttermg including strutting, propping etc. and removal of form for· Edges of slabs and breaks in floors and walls. Under 20 cm vide

Providing and fixing 1 mm thick M.S. steel door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angles 40x40x6mm for diagonal braces

Providing and fixing wood work in frames of doors windows and other frames wrought frames and fixed in position of 2nd Class Kail wood including all lead lift and carriages.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,all complete as per direction of engineer- in charge.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.coir veneer board (conforming to IS 14842)(12 mm thick)

Pre-laminated particle board with decorative lamination on both sides, Grade I, Type Il lS: 12823 marked towards the cost of 4mm thick float glass

Providing and fixing paneled or glazed shutters for doors and windows and clestory windows using 10 kg /sqm (4mm thick) float glass panes including ISI marked black enameled M.S. butt hinges bright finished of requried size with necessary screws,( 35mm thick of 2nd class kail wood).

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete:2nd class teak wood 50x12mm

15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 ( 1 cement 6 fine sand )including all lead lift and carriages.

12 mm cement plaster on the rough side of single or half brick wall of mix 1:6 ( 1 cement 6 fine sand )including all lead lift and carriages.

12 mm thick plaster in 1:4 , 1 cement:4 fine sand )including all lead lift and carriages.

Cement concrete flooring in (1:2:4) 1 cement : 2 coarse sand : 4 stone aggregate finishing with a floating coat of neat cement including cement slurry but exd. The cost of nosing of step etc. complete 40mm thick with 20 mm nominal size stone aggregates (nallah) including all lead lift and carriages.

Providing wood work in frames of false ceiling, partitions etc sawn and fixed in position 2nd class kail wood

Filling available excavated earth(excluding rock) in trenches ,plinth,sudes of foundation etc.Layers not exceeding 20 cm in depth,conslidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m.

Strctural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing hard board ceiling, sheet of approved quality with necessary nails etc. complete (frame work to be paid for separately) Standard Quality board 6mm thick

Providing fixing and incorporating glass strips nominal size of 35 mm x 4 mm) under flooring.

Providing corrugated G.S. sheet roofingincluding vertical/curved surface fixed with polymer coated J or L hooks bolts, nuts 8 mm diameter with bitumen and G.I limpet washers or with G.I limpet washers filled with white lead including a coat of approved steel primer and two coats of approved paint on overlaping of steels complete ( upto a pitchin horizontal/vertical or curved surface) excluding the cost of purlin ,rafters and trusses and including cutting to size and shape where ever requried 0.63 thick with zinc coating not less than 275 gm/sqm including all lead lift and carriages.

Providing ridges of hips of width 60 cm 0verall width plain GS Sheet fixed with polymer coated J or L hooks bolts, nuts 8 mm diameter with bitumen and G.I limpet washers complete 0.50mm thick

Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap, 10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) "manually controlled (led device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.Orissa pattern white vitreous china W.C. pan of size 580x440 mm with integral type foot rests.

Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. including all lead lift and carriages.

Providing and laying/ fixing Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITCO, ORIENT, KAJARIA, SOMANY or equivalent make in colour shades except White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 (1 cement: 4 coarse sand) including pointing the joints with white cement and matching pigments etc., complete.including all lead lift and carriages.

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting of doors and windows with ready mixed synthetic enamel paint of approved brand and manufacture in all shades including priming coat

Making plinth protection 50 mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggreagate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. Crushed Aggregates.including all lead lift and carriages.

Painting of doors and windows with ready mixed synthetic enamel paint of approved brand and manufacturers in all shades (two or more coats) on new work

Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades. To giv e an even shades new steel work two or more coats

White washing with lime to give an even shade with two or more coats for new work.

Providing and fixing plained eaves boarding(2nd class kail wood),250mmx32mm nominal size.

Providing and fixing soil, waste and vent pipes : 100 mm dia.

Providing and fixing door piece, insertion rubber washer 3 mm thick, bolts & nuts complete : 100 mm.

Providing and fixing collar :100 mm.

Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc.: Internal work exposed on wall 15 mm dia. nominal bore(light)

Providing and placing on terrace ( at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license].

Providing and fixing brass bib cock of approved quali1ty. 15 mm nominal bore

Providing and fixing brass stop cock of approved quality. 15 mm nominal bore

Providing and fixing p.v.c waste pipe for sink or wash basin including p.v.c waste fitting complete semi rigid pipe 32 mm dia

Providing and fixing lSI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :250x16 mm

Providing and Fixing aluminium tower bolt ISI marked anodized (anodic coating not less than grade AC as per IS 1868)transparent or dyed to required colouur or shade with necessary screws etc. complete 100 X 10 MM

Providing and Fixing aluminium tower bolt ISI marked anodized (anodic coating not less than grade AC as per IS 1868)transparent or dyed to required colouur or shade with necessary screws etc. complete 200 X 10 MM

Providing and Fixing aluminium handle ISI marked anodized (anodic coating not less than grade AC as per IS 1868)transparent or dyed to required colouur or shade with necessary screws etc. complete 125 mm

Providing and Fixing aluminium handle ISI marked anodized (anodic coating not less than grade AC as per IS 1868)transparent or dyed to required colouur or shade with necessary screws etc. complete 100 mm

M/s Sameena Begum Co

Shabir Ahmad Dev