SPECIAL REPAIRS/REPLACEMENT OF LT PANELS, LOOP IN, LOOP OUT BOXES AREA AND BUS BAR BOXES AND SPECIAL REPAIRS AGAINST BER, CEILING FAN, WALL MOUNTED FAN AND GEYSERS AT AF STN YELAHANKA

Amount

Fabricate, supply ,install, testing and commissioning of LT panel indoor type 415 Volts, 50 Hz, 3 phase, 4 wire for accomodating the following accessories totally enclosed self supporting structure fully compartmentalized suitable for indoor use with bottom cable entry with suitable cable glands made out of CRCA sheet 2mm thick with angle iron frame works with suitable legs of ISA 50x50x5mm with four legs grouted with PCC (1:2:4) type B1, foundation block with suitable mounting arrangement for aluminium bus bars 900 Amps capacity, hindged door at front with suitable locking arrangement, provision of louvers at sides, CPRI approved, dust and vermin proof, powder coated with and including following accessories suitable for incoming/outgoing arrangements complete all as specifed and directed Location :- AN-32 Power House INCOMING:- (a) 4 Pole ACB 630 Amp, 50 Hz, 415 V with rupturing capacity 50 KA, Incomer -1 No OUTGOING:- (b) 4 Pole MCCB 400 Amp, 50 Hz, 415 V with rupturing capacity 36 KA,-1 No (c) 4 Pole MCCB 160 Amp,50 Hz, 415V with rupturing capacity 25 KA- 8 No (d) Digital Volt meter (0-500 V)-01 No (e) Digital Ammeter-01 No (f) CT's 600/5- 01 (set of 03) (g) LED type Indication lamps (RYB)-one set Note : Bottom portion of the panel should be minimum 45 cm above the ground level.

Fabricate, supply ,install, testing and commissioning of LT panel indoor type 415 Volts, 50 Hz, 3 phase, 4 wire for accomodating the following accessories totally enclosed self supporting structure fully compartmentalized suitable for indoor use with bottom cable entry with suitable cable glands made out of CRCA sheet 2mm thick with angle iron frame works with suitable legs of ISA 50x50x5mm with four legs grouted with PCC (1:2:4) type B1, foundation block with suitable mounting arrangement for aluminium bus bars 900 Amps capacity, hindged door at front with suitable locking arrangement, provision of louvers at sides, CPRI approved, dust and vermin proof, powder coated with and including following accessories suitable for incoming/outgoing arrangements complete all as specifed and directed Location :- AN-32 Power House INCOMING:- (a) 4 Pole ACB 630 Amp, 50 Hz, 415 V with rupturing capacity 50 KA, Incomer -3 No OUTGOING :- (b) 4 Pole MCCB 400 Amp, 50 Hz, 415 V with rupturing capacity 36 KA,-03 No (c) 4 Pole MCCB 315 Amp,50 Hz, 415V with rupturing capacity 36 KA- 03 No (d) Star Delta Starter for 70HP (Fire Main Pump)-1No (e) DOL Starter for 7.5HP (Jockey)-1No (f) Star Delta Starter for 5HP (water supply pump)-2No (g) On load Changeover switch 25 Amps , 415v, 4pole,3Ph-1No (h) Digital Volt meter (0-500 V)-01 No (j) Digital Ammeter-01 No (k) CT's 630/5- 01 (set of 3) (l) LED type Indication lamps (RYB)-one set Note : Bottom portion of the panel should be minimum 45 cm above the ground level

Fabricate, supply ,install, testing and commissioning of LT panel indoor type 415 Volts, 50 Hz, 3 phase, 4 wire for accomodating the following accessories totally enclosed self supporting structure fully compartmentalized suitable for indoor use with bottom cable entry with suitable cable glands made out of CRCA sheet 2mm thick with angle iron frame works with suitable legs of ISA 50x50x5mm with four legs grouted with PCC (1:2:4) type B1, foundation block with suitable mounting arrangement for aluminium bus bars 600 Amps capacity, hindged door at front with suitable locking arrangement, provision of louvers at sides, CPRI approved, dust and vermin proof, powder coated with and including following accessories suitable for incoming/outgoing arrangements complete all as specifed and directed Location:- AN-32 Power House INCOMING :- (a) 4 Pole ACB 400 Amp, 50 Hz, 415 V with rupturing capacity 36 KA, Incomer -1 No OUTGOING :- (b) 4 Pole MCCB 200 Amp, 50 Hz, 415 V with rupturing capacity 36 KA, -1 No (c) 4 Pole MCCB 250 Amp, 50 Hz, 415 V with rupturing capacity 36 KA, -2 No (d) 4 Pole MCCB 100 Amp, 50 Hz, 415 V with rupturing capacity 16 KA, -3 No (e) Digital Volt meter (0-500 V)-01 No (f) Digital Ammeter-01 No (g) CT's 400/5- 01 (set of 3) (h) LED type Indication lamps (RYB)-one set Note : Bottom portion of the panel should be minimum 45 cm above the ground level.

Fabricate, supply ,install, testing and commissioning of LT panel indoor type 415 Volts, 50 Hz, 3 phase, 4 wire for accomodating the following accessories totally enclosed self supporting structure fully compartmentalized suitable for indoor use with bottom cable entry with suitable cable glands made out of CRCA sheet 2mm thick with angle iron frame works with suitable legs of ISA 50x50x5mm with four legs grouted with PCC (1:2:4) type B1, foundation block with suitable mounting arrangement for aluminium bus bars 1200 Amps capacity, hindged door at front with suitable locking arrangement, provision of louvers at sides, CPRI approved, dust and vermin proof, powder coated with and including following accessories suitable for incoming/outgoing arrangements complete all as specifed and directed Location :- AN-32 Power House INCOMING (a) 4 Pole ACB 800 Amp, 50 Hz, 415 V with rupturing capacity 50 KA, Incomer -1 No OUTGOING (b) 4 Pole MCCB 400 Amp, 50 Hz, 415 V with rupturing capacity 36 KA,-2 No (c) 3 Pole MCCB 200 Amp, 50 Hz, 415 V with rupturing capacity 36 KA, -2 No (d) Digital Volt meter (0-500 V)-01 No (e) Digital Ammeter-01 No (f) CT's 800/5- 01 (set of 3) (g) LED type Indication lamps (RYB)-one set Note : Bottom portion of the panel should be minimum 45 cm above the ground level.

Fabricate, supply ,install, testing and commissioning of LT panel indoor type 415 Volts, 50 Hz, 3 phase, 4 wire for accomodating the following accessories totally enclosed self supporting structure fully compartmentalized suitable for indoor use with bottom cable entry with suitable cable glands made out of CRCA sheet 2mm thick with angle iron frame works with suitable legs of ISA 50x50x5mm with four legs grouted with PCC (1:2:4) type B1, foundation block with suitable mounting arrangement for aluminium bus bars 600 Amps capacity, hindged door at front with suitable locking arrangement, provision of louvers at sides, CPRI approved, dust and vermin proof, powder coated with and including following accessories suitable for incoming/outgoing arrangements complete all as specifed and directed Location :- AN-32 Power House INCOMING:- (a) 4 Pole MCCB 400 Amp, 50 Hz, 415 V with rupturing capacity 36 KA, Incomer -1 No OUTGOING:- (b) Digital Volt meter (0-500 V)-01 No (c) Digital Ammeter-01 No (d) CT's 400/5- 01 (set of 3) (e) LED type Indication lamps (RYB)-one set Note : Bottom portion of the panel should be minimum 45 cm above the ground level

Fabricate, supply ,install, testing and commissioning of LT panel indoor type 415 Volts, 50 Hz, 3 phase, 4 wire for accomodating the following accessories totally enclosed self supporting structure fully compartmentalized suitable for indoor use with bottom cable entry with suitable cable glands made out of CRCA sheet 2mm thick with angle iron frame works with suitable legs of ISA 50x50x5mm with four legs grouted with PCC (1:2:4) type B1, foundation block with suitable mounting arrangement for aluminium bus bars 600 Amps capacity, hindged door at front with suitable locking arrangement, provision of louvers at sides, CPRI approved, dust and vermin proof, powder coated with and including following accessories suitable for incoming/outgoing arrangements complete all as specifed and directed Location :- AN-32 Power House INCOMING:- (a) 4 Pole ACB 630 Amp, 50 Hz, 415 V with rupturing capacity 50 KA, Incomer -1 No OUTGOING:- (b) 4 Pole MCCB 400 Amp, 50 Hz, 415 V with rupturing capacity 36 KA,-1 No (c) 4 Pole MCCB 300 Amp, 50 Hz, 415 V with rupturing capacity 36 KA, -2 No (d) Digital Volt meter (0-500 V)-01 No (e) Digital Ammeter-01 No (f) CT's 630/5- 01 (set of 3) (g) LED type Indication lamps (RYB)-one set Note : Bottom portion of the panel should be minimum 45 cm above the ground level

Fabricate, supply ,install, testing and commissioning of LT panel indoor type 415 Volts, 50 Hz, 3 phase, 4 wire for accomodating the following accessories totally enclosed self supporting structure fully compartmentalized suitable for indoor use with bottom cable entry with suitable cable glands made out of CRCA sheet 2mm thick with angle iron frame works with suitable legs of ISA 50x50x5mm with four legs grouted with PCC (1:2:4) type B1, foundation block with suitable mounting arrangement for aluminium bus bars 350 Amps capacity, hindged door at front with suitable locking arrangement, provision of louvers at sides, CPRI approved, dust and vermin proof, powder coated with and including following accessories suitable for incoming/outgoing arrangements complete all as specifed and directed Location :- DORNIER FTD INCOMING:- (a) 4 Pole MCCB 200 Amp, 50 Hz, 415 V with rupturing capacity 36 KA, Incomer -1 No OUTGOING:- (b) 4 Pole MCCB 125 Amp, 50 Hz, 415 V with rupturing capacity 16 KA, -3 No (c) 4 Pole MCCB 63 Amp, 50 Hz, 415 V with rupturing capacity 16 KA, -3 No (d) Digital Volt meter (0-500 V)-01 No (e) Digital Ammeter-01 No (f) CT's 200/5- 01 (set of 3) (g) LED type Indication lamps (RYB)-one set Note : Bottom portion of the panel should be minimum 45 cm above the ground level

Fabricate, supply ,install, testing and commissioning of LT panel indoor type 415 Volts, 50 Hz, 3 phase, 4 wire for accomodating the following accessories totally enclosed self supporting structure fully compartmentalized suitable for indoor use with bottom cable entry with suitable cable glands made out of CRCA sheet 2mm thick with angle iron frame works with suitable legs of ISA 50x50x5mm with four legs grouted with PCC (1:2:4) type B1, foundation block with suitable mounting arrangement for aluminium bus bars 350 Amps capacity, hindged door at front with suitable locking arrangement, provision of louvers at sides, CPRI approved, dust and vermin proof, powder coated with and including following accessories suitable for incoming/outgoing arrangements complete all as specifed and directed Location :- DORNIER FTD INCOMING:- (a) 4 Pole MCCB 200 Amp, 50 Hz, 415 V with rupturing capacity 36 KA -1 No OUTGOING:- (b) 4 Pole MCCB 200 Amp, 50 Hz, 415 V with rupturing capacity 36 KA -1 No (c) Digital Volt meter (0-500 V)-01 No (d) Digital Ammeter-01 No (e) CT's 200/5- 01 (set of 3) (f) LED type Indication lamps (RYB)-one set Note : Bottom portion of the panel should be minimum 45 cm above the ground level

Fabricate, supply ,install, testing and commissioning of LT panel indoor type 415 Volts, 50 Hz, 3 phase, 4 wire for accomodating the following accessories totally enclosed self supporting structure fully compartmentalized suitable for indoor use with bottom cable entry with suitable cable glands made out of CRCA sheet 2mm thick with angle iron frame works with suitable legs of ISA 50x50x5mm with four legs grouted with PCC (1:2:4) type B1, foundation block with suitable mounting arrangement for aluminium bus bars 1200 Amps capacity, hindged door at front with suitable locking arrangement, provision of louvers at sides, CPRI approved, dust and vermin proof, powder coated with and including following accessories suitable for incoming/outgoing arrangements complete all as specifed and directed Location :- 112 HU PH INCOMING:- (a) 4 Pole ACB 800 Amp, 50 Hz, 415 V with rupturing capacity 50 KA, Incomer -1 No OUTGOING:- (b) 4 Pole MCCB 315 Amp, 50 Hz, 415 V with rupturing capacity 36 KA, Incomer -2 No (c) 4 Pole MCCB 160 Amp, 50 Hz, 415 V with rupturing capacity 36KA, Incomer -4 No (d) 4 Pole MCCB 250 Amp, 50 Hz, 415 V with rupturing capacity 36 KA, Incomer -2 No (e) 4 Pole MCCB 63 Amp, 50 Hz, 415 V with rupturing capacity 16 KA, Incomer -2 No (f) 4 Pole MCCB 32 Amp, 50 Hz, 415 V with rupturing capacity 16 KA, Incomer -2 No (g) Digital Volt meter (0-500 V)-01 No (h) Digital Ammeter-01 No (j) CT's 800/5- 01 (set of 3) (k) LED type Indication lamps (RYB)-one set Note : Bottom portion of the panel should be minimum 45 cm above the ground level

Fabricate, supply ,install, testing and commissioning of LT panel indoor type 415 Volts, 50 Hz, 3 phase, 4 wire for accomodating the following accessories totally enclosed self supporting structure fully compartmentalized suitable for indoor use with bottom cable entry with suitable cable glands made out of CRCA sheet 2mm thick with angle iron frame works with suitable legs of ISA 50x50x5mm with four legs grouted with PCC (1:2:4) type B1, foundation block with suitable mounting arrangement for aluminium bus bars 400 Amps capacity, hindged door at front with suitable locking arrangement, provision of louvers at sides, CPRI approved, dust and vermin proof, powder coated with and including following accessories suitable for incoming/outgoing arrangements complete all as specifed and directed Location :- 112HU PH INCOMING:- (a) 4 Pole MCCB 250 Amp, 50 Hz, 415 V with rupturing capacity 36 KA, -1 No OUTGOING:- (b) 4 Pole MCCB 160 Amp, 50 Hz, 415 V with rupturing capacity 36 KA, -1 No (c) 4 Pole MCCB 63 Amp, 50 Hz, 415 V with rupturing capacity 16 KA, -1 No (d) Digital Volt meter (0-500 V)-01 No (e) Digital Ammeter-01 No (f) CT's 200/5- 01 (set of 3) (g) LED type Indication lamps (RYB)-one set Note : Bottom portion of the panel should be minimum 45 cm above the ground level

Fabricate, supply ,install, testing and commissioning of LT panel indoor type 415 Volts, 50 Hz, 3 phase, 4 wire for accomodating the following accessories totally enclosed self supporting structure fully compartmentalized suitable for indoor use with bottom cable entry with suitable cable glands made out of CRCA sheet 2mm thick with angle iron frame works with suitable legs of ISA 50x50x5mm with four legs grouted with PCC (1:2:4) type B1, foundation block with suitable mounting arrangement for aluminium bus bars 500 Amps capacity, hindged door at front with suitable locking arrangement, provision of louvers at sides, CPRI approved, dust and vermin proof, powder coated with and including following accessories suitable for incoming/outgoing arrangements complete all as specifed and directed Location :- 112HU DSS INCOMING:- (a) 4 Pole MCCB 315 Amp, 50 Hz, 415 V with rupturing capacity 36 KA, -1 No OUTGOING:- (b) 4 Pole MCCB 160 Amp, 50 Hz, 415 V with rupturing capacity 36 KA, -2 No (c) 3 Pole MCCB 100 Amp, 50 Hz, 415 V with rupturing capacity 16 KA, -3 No (d) 3 Pole MCCB 63 Amp, 50 Hz, 415 V with rupturing capacity 16 KA, -3 No (e) 3 Pole MCCB 200 Amp, 50 Hz, 415 V with rupturing capacity 36 KA, -1 No (f) MCB 63 Amp, 50 Hz, -2 No (d) Star Delta Starter for 70HP (Fire Main Pump)-1No (e) DOL Starter for 7.5HP (Jockey)-1No (f) Star Delta Starter for 5HP (water supply pump)-2No (g) On load Changeover switch 25 Amps , 415v, 4pole,3Ph-1No (h) Digital Volt meter (0-500 V)-01 No (j) Digital Ammeter-01 No (k) CT's 315/5- 01 (set of 3) (l) LED type Indication lamps (RYB)-one set Note : Bottom portion of the panel should be minimum 45 cm above the ground level

M & L for Earthing complete with galvanised earth plate electrode of size 600x600x6 mm thick burried directly in ground earth pit not less than 2.25 m below ground level with top edge of earth plate not less than 1.5 mtrs below ground level connected to 25X4 mm galvanised iron strip as earth lead upto a length of 7.5 metre long by means of bolts,nuts, washers etc. and protected by GI pipe light grade 15mm dia and 20mm dia GI tubing light grade with funnel for watering, all as shown in electrical plate No 3 of SSR Part-I, back-fill with salt and charcoal, provision of test point including connected to earth test point and necessary earth work excavation in any type of soil PCC (1:3:6) type C1 bed and chamber RCC (1:2:4) type B1, iron grill including GI cover with hinge and funnel watering pipe etc, testing, complete all as specified and directed by Engr-in-Charge. Note : If desired testing result is not acheived re-earthing shall be carried out by the contractor at no cost to the department.

Supply and fixing ceiling fan complete with blades, down rods, electronic regulator and accessories, 230V, 1200 mm sweep, min air delivery 235 CMM, Copper winding, Service value 8.4 CMM/W, Class of insulation for winding – Class F, Governing specs – as per IS 374:2019, with value 6.00 BEE five star rated with brushless direct current motor (BLDC) including writing MES No with black paint complete all as specified and directed by Engineer-in-Charge

Supply and fix exhaust fan, steel body AC single Phase 230V of size 300mm sweep with, blades, frame and louvers including writing MES No with black paint complete all as specified and directed by Engr-in-charge.

Supply and fix air circulator (wall mounted fan) 450 mm sweep, 1400 RPM, 230 Volt AC, 50 Hz sigle phase air delivery not less than 115 CFM, power consumption not more than 100W, metal body and connecting up including provison of cable from ceiling rose/connector to Wall fan including writng MES No with black paint complete all as specified and directed by Engr-in-Charge.

Supply and fix electric water heater, storage type shock-resistant ABS outer body, Mild Steel with glass lined enamel coating inner tank and copper heating element upto 2 KW of capacity 50 litre, BEE 5 Star rated, withstand upto 8 bar pressure, complete with all accessories such as safety valve, thermostate, NRV, connection piece etc including writng MES No with black paint complete all as specified and directed by Engr-in-Charge.

ARUNOTHAYA TRADERS (BID ID -3073540)