Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.2 LAccepted-AOC | L1 | Accepted-AOC BEING L1 | |
| 2 | L2₹9.9 L+₹34,694 (3.64%)Rejected-Finance NO 15 PULAVAR GOVINDAN STREET GANDHI NAGAR AVADI CHENNAI 600 054 | AVADI | CHENNAI | TAMIL NADU | 600054 | L2 | Rejected-Finance BEING L2 |
Tender Value
₹10.0 L
EMD Value
₹20,000
Closing Date
4 Sept 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE I RD AVADI
AGE I RD AVADI CHENNAI-54
REPAIR AND MAINTENACE TO JOINERY AND OTHER ALUMINIUM WORKS AT TECHNICAL AREA CVRDE AVADI
2024_MES_655213_2
8635/E8
Open Tender
Civil Works
Item Rate
AVADI
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
AGE I RD AVADI
₹20,000
Yes
22 Oct 2024
3 Jul 2024
6 Sept 2024
3 Jul 2024
4 Sept 2024
9 Jul 2024
Amount
Taking down shutters exc 1 sq. m and n exc 2 sq. m all as specified and as directed by Engineer-in-Charge.
Taking down Chowkhats or frames n.exc 1.5 sqm with shutters (without taking off shutters from the frame) each all as specified and as directed by Engineer-in-Charge.
Taking down Chowkhats or frames exc 1.5 sqm but n exc 4 sqm with shutters (without taking off shutters from the frame) each all as specified and as directed by Engineer-in-Charge.
Refixing shutters in same opening of any description of area exc 1 Sqm but n.exc 2 Sqm each all as specified and as directed by Engineer-in-Charge.
S&F 2nd class HW plain solid straight chowkhat and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints all as specified and as directed by Engineer-in-Charge.
S&F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides face is covered with decorative face veneer with lipping/frame to match all as specified and as directed by Engineer-in-Charge.
S&F Glazed and skeleton shutters 30mm thick of 2nd class hardwood, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats all as specified and as directed by Engineer-in-Charge.
S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and as directed by the Engineer-in-Charge.
Supply and fix Anodised aluminium powder coated door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. Complete all as specified.
S&F powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified.
Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and as directed by Engineer-in-charge.
M&L in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed by the Engineer-in-Charge.
S&F mortice lock 75mm cp brass type 2 livers all as specified and as directed.
S&F in repairs CP brass mortice lock two livers 75mm with key in duplicate all as specified and as directed.
M&L for Door closer hydraulically regulated aluminium body fixed suitable for doors all as specified and as directed.
S&F Floor door stopper of aluminium alloy body 140mm long and tongue, anodised, with hard drawn steel spring, fixed all as specified and as directed by Engineer-in-Charge.
M&L fo Prelaminated particle board interior grade 9mm thick with decorative choice lamination on both side all as specified and as directed by Engineer-in-Charge.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing all as specified and as directed by Engineer-in-Charge.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing all as specified and as directed by Engineer-in-Charge.
S&F steel windows with side hung shutters including box type hinges with steel handle and steel peg stay, complete with glazing bars, devetailed or welded all as specified and as directed by Engineer-in-Charge.
S&F Alumnium powder coated sections made out of hallow/ solid extruded aluminium section (minimum thickness of powder coating 50 micron) for openable windows/sliding windows/ventilators/door shutter with all types of frames with one or more rebates including joining cleats, beads for fixing etc complete all as specified and as directed & approved by Engineer-in-Charge. (glass/wiremesh shall be measured and paid separately).
S&F tinted glass 5.5mm thick fixed with glazing clip, rubber beading /gasket in squares in each pane all as specified and as directed by Engineer-in-Charge.
S&F Alumnium powder coated louvers (movable arrangement in pair) for ventilators including locking arrangement complete all as specified and as directed by Engineer-in-Charge.
S&F 300mm long aluminium anoised sliding door bolt with hasp staple (Bolt type) and fixing clips of sheet cast or extruded section and fixing both and sliding boths of external section or cast alumnium alloy and fixed all as specified and as directed by Engineer-in-Charge.
S&F Aluminium anodized barrel tower bolts 200mm long of extruded section and fixed all as specified and as directed by Engineer-in-Charge.
-Ditto- All as per ser item No 25 above but 100 mm long.all as specified
S&F Aluminium handle cast type anodized of size 150mm long all as specified and as directed by Engineer-in-Charge.
-Ditto- All as per ser item No 27 above but 100 mm long.all as specified
S&F SS Butt hinges,100 mm, medium weight, cold rolled mild steel, and fixed all as specified and as directed by Engineer-in-Charge.
S&F 25 x 6 mm flat iron for hold fast confirming to Fe-290 Gde E-165 all as specified and as directed by Engineer-in-Charge.
S&F in repairs 300mm long aluminium anoised sliding door bolt with hasp staple (Bolt type) and fixing clips of sheet cast or extruded section and fixing both and sliding bolts of external section or cast alumnium aloy and fixed all as specified and as directed by Engineer-in-Charge.
S&F in repairs 200mm Aluminium anodized barrel tower bolts of extruded section and fixed all as specified and as directed by Engineer-in-Charge.
-Ditto- All as per ser item No 32 above but 100 mm long.all as specified.
S&F in repairs Aluminium handle cast type anodized of size 150mm long all as specified and as directed by Engineer-in-Charge.
-Ditto- All as per ser item No 34 above but 100 mm long.all as specified.
S&F in repairs SS Butt hinges,100 mm, medium weight, cold rolled mild steel, and fixed all as specified and as directed by Engineer-in-Charge.
M&L for preparing new wooden surfaces and two coats of synthetic enamel paints over a coat of pink primer all as specified and as directed by Engineer-in-Charge
Taking down cement plaster on wall / ceilng surfaces including racking out joints, hacking for key scrubbing down with water etc to receive new plaster all as specified and as directed by the Engineer-in-Charge.
M&L for rendering 10 mm thick on fair faces of brick work or concrete wall surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge.
M&L for preparation of new decorated surfaces and applying two coat of distemper over 3 mm thick wall care putty on walls all as specified and as directed by Engineer in charge.
Dismantling floor/wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
M&L for Glazed ceramic coloured tiles in vertical surface 350x450x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick plaster in CM 1:4 complete all as specified and as directed.
Hacking out old broken glasses any thickness size , quality, description from metal frame including punching or drilling out old glazing pins /spring clips etc all as specified and as directed by Engineer-in-Charge.
S & F 4 mm thick sheet glass ordinary quality and glazing with oil putty and cilips in squares n. exc 0.5 sqm each pane all as specified and as directed by Engineer-in-Charge.
S & F 4.8 mm thick sheet glass ordinary quality and glazing with oil putty/Gasket rubber and cilips in squares n. exc 0.5 sqm each pane all as specified and as directed by Engineer-in-Charge.
M&L for Securing glass of any description in existing metal frames glazed with putty including removing loose or decayed putty, painting/oiling one coat on rebates, grooves, reputtying incl pins and painting / oiling puttied surface to match existing work all as specified and directed by Engineer-in-Charge.(New length of frame reputted shall be measured).
Repairs to existing aluminium doors by making adjustments in members to make them smooth functionable including necessary opening of parts, grinding, cutting,fixing of cleats, hinges, rubber beads, rollers, screws, adjustment of door closer etc. complete all as directed by Engineer-in-Charge.
Repairs to existing aluminium windows by making adjustments in members to make them smooth functionable including necessary opening of parts, grinding, cutting,fixing of cleats, hinges, rubber beads, rollers, screws etc. complete all as directed by Engineer-in-Charge
M&L for French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coat all as specified and as directed by Engineer-in-Charge.
M&L Cement concrete (1:2:4) type B-1 using 12.5 mm graded stone aggregate as in lintels upto 1.50 m clear span, cills , steps, seismic and other similar bands, copings, kneelars, apex stones, bed plates, bed blocks of hold fasts etc including necessary form work complete all as specified.
S&F Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as specified and as directed by Engineer in charge.
M&L for Preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed by Engineer in charge.
D Subramani & Sons (BID ID -3062339)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .