CERTAIN B R REPAIRS TO FLOOR AND WALL TILLING CEILING JOINERY PLUMBING SANITARY FITTINGS PLASTERING BRICK WORK ETC AT NABAGRAM MILITARY STATION UNDER GE P PANAGARH

Amount

Demolition of cement Concrete is ground floors andy pavings n exc 15 cm thickness (below or above ground level) all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding and removing serviceable tiles to stores and rubbish off the premises all as specified and directed.

M&L Vitrified ceramic tiles light shade 10mm thick (Square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc , set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces, over and including screed bed 15mm thick in cement mortar (1:6) all as specified and directed.

M & L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including screed bed 15mm thick in cement mortar (1:6) all as specified and directed.

M&L PCC (1:2:4) type B1 (using 12.5 mm graded aggregate) 25 mm thick as in flooring all as specified and directed. .

M&L for nonskid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. of approved colour any print/design in floor etc set and jointed in neat cement slurry and pointed in white/coloured cement to match the surfaces, over and including screed bed 15mm thick in cement mortar (1:6) all as specified and directed.

M&L for nonskid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.16 sqm, in floors etc. of approved colour any print/design in floor etc set and jointed in neat cement slurry and pointed in white/coloured cement to match the surfaces, over and including screed bed 15mm thick in cement mortar (1:6) all as specified and directed.

M&L for Glazed ceramic tiles in vertical surface 300x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match of approved colour any print/design set and jointed in neat cement slurry and pointed in white/coloured cement to match the surfaces over and including backing 10mm thick in CM (1:4) all as specified and directed.

M&L of granite of (type and colour as approved) of 20mm thick rubbed and polished, edges rounded in cooking plat forms, shelves and like in CM (1:4) including pointing in white cement 1:2 using marble dust and with admixture of pigment to match the shade of granite 20mm thick over and including screed bed 15mm thick in CM (1:6) all as specified and directed.

M&L for 40mm thick plain cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in floors, finishing surface even and smooth by using extra cement all as specified and as directed.

M&L for renewing tiles in patches area n. exc 5.00 Sqm including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new ceramic tiles to match the existing floor complete all as specified and as directed.

S&F in repair of wash basin white vitreous china 550x400mm half pedstel pattern including necessary CP waste fittings, waste pipe, complete all as specified and directed.

S&F of vitreous china wash down water closet pan (pedastal pattern) white excluding flushing cistern and flush pipe including plastic seat cover black closed patternwith flat bottom and cover and mild steel chromium platedhinging device fixed in repairs all as specified and directed.

S&F vitreous china white squatting pan Orissa patern size 630 x 450 mm with integral foot rest fixed in repairs all as specified and directed.

S&F of CP brass jet/hand shower (health faucet) with 1m long flexible tube and hang 15mm dia fixed to stop cock/Blib cock fixed in repairs Make : Jaquar/parryware all as specified and directed.

S&F vitreous china white flat back half stall urinal including sensor operated CP waste fitting, waste pipe, including necessary CP connecting pipe etc complete all as directed fixed in repairs. Make : Hindware/Parry ware or equivalent

S&F of 10 liters capacity PVC flushing cistern of approved colour complete all as directed fixed in repairs all as specified and directed.

S&F of CP brass towel rail 20 mm dia 600 long fixed in repairs (premium quality) all as specified and directed. .

Taking up or down steel tubing and connections including cleaning for refixing or removal to store in 15mm bore all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing or removal to store in 20mm bore all as specified and directed.

M&L refixing old steel tubing and connections in new or old position ( walls, ceiling, floors etc ) in 15mm size all as specified and directed.

M&L refixing old steel tubing and connections in new or old position ( walls, ceiling, floors etc ) in 20mm size all as specified and directed.

M&L tubes medium grade , galvanised with all fitting and fixed to walls and ceilings or laid in floors in 15mm size all as specified and directed.

M&L tubes medium grade , galvanised with all fitting and fixed to walls and ceilings or laid in floors in 20mm size all as specified and directed.

S&F rotational moulded polyethylne water storage tanks (cylindrical, vetical with closed top) hoisted and fixed in position of 500 ltrs capacity including taking down old one all as specified and as directed.

S&F rotational moulded polyethylne water storage tanks (cylindrical, vetical with closed top) hoisted and fixed in position of 1000 ltrs capacity including taking down old one all as specified and as directed.

S&F of ball brass valves 20 mm dia high pressure with polythene float and flynut screwed for iron pipe or brass ferrule all as specified and directed.

All as per item No 27 here-in-before but 25 mm dia all as specified and directed.

S&F PTMT waste coupling of 32 mm dia (half or fullthreaded) including taking down old coupling of any description complete all as specified and as directed (Minimum weight for 32 mm - 45 gms) fixed in repairs all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 450 mm, including taking down old PVC connection all as specified and as directed.

All as per item No 30 here-in-before but 600 mm lengths including taking down old PVC connection all as specified and as directd.

S&F 75mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including taking down old pipes all as specified and as directed.

All as per item No 32 here-in-before but 110 mm dia all as specified and directed.

S&F PVC (SWR) bends any radius 75mm dia of bore, including taking down old bends all as sepcified and as directed.

S&F PVC (SWR) bend 110mm dia of bore, including taking down old bends all as sepcified and as directed.

S&F plastic water closet seat cover, white or black colour closed pattern with flat bottom including taking down old seat cover complete all as specified and as directed. Make - Hindware/parryware

S&F of CP brass bib tap 15 mm dia long body fancy type chromium plated fixed in repairs all as specified and directed.

S&F of CP brass pillar tap 15 mm dia fancy type fixed in repairs all as specified and directed.

S&F of CP brass stop valves 15 mm dia fancy type (angular/ regular type) fixed in repairs all as specified and directed.

S & F anodised aluminum frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified & Directed.

S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified & Directed.

S & F anodised aluminum for windows, ventilators shutters, side hung type without sash, aluminum sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws, anodised aluminum fittings such as peg stays 150mm long (01No) hinges type B-21 100mm long (2No) suitable handle (01No) for fixing etc. complete all as specified and directed.

Supply and fix 5mm thick sheet glass ordinary quality exc 0.50 Sqm in each pane. Make : Modiguard/Atul/Pilkington all as specified and directed.

M&L prelaminated particle board , exterior grade, 12mm thick, prelaminated both side fixed to aluminium frame work. Make : NOVAPAN all as specified and directed.

S&F of door closer hydraulically regulated aluminium body designation No 3 universal type suitable for door shutter of weight between 61 to 80Kg of approved make having ISI mark all as specified and directed fixed in repairs. Make LEVERITE/KELVIN all as specified and directed.

S&F in repair double action floor spring hydraulically regulated made up of aluminium alloy sheet foundation box with stainless steel cover fixed to Aluminium doors includind taking down and refixing also fixed in repairs Make Sandhu/Samrat all as specified and directed.

S&F in repair aluminium door lock six lever vertical type brass body, 100mm long with duplicate key. Make : Godrej all as specified and directed.

Taking down false ceiling including snap grid of any type or any discription all as directed.

Re-arranging the existing aluminium grid work /Armstrong grid by strengthening the member and refixing in ceiling by drilling/cutting/ entering slab and hanging with MS roads / GI suspended wire (including taking down of existing ceiling boards/tiles and refixing) complet all as specified and directed.

Taking down chowkhats of frame with shutter (with out taking of shuttors from the frame) exc 1.5 Sqm but n.exc 4 Sqm each all as specified and directed.

All as per item No 52 above but nexc 1.5 sqm each all as specified and directed.

Taking down shutter of any description exc 1 Sqm but not exc 2 Sqm each all as specified and directed.

Taking down shutter of any description exc 2 Sqm each all as specified and directed.

S&F flat iron 25 x 6 mm thick as in hold fast fixed to chowkhats all as specified and directed.

M&L for cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in bed block hold fast etc including necessary from work all as specified and directed.

S&F flush shutter core construction with block board core and ply wood face panels commercial type on both side 35 mm thick all as specified and directed.

S&F for solid PVC door frame of size 50 mm x 95 mm made out of 5 mm thick prelaminated PVC sheet (both sides) MS square tube reinforced all as specified and directed.

S&f factory made solid panel PVC shutter 30 mm thiuck (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded pre-laminated PVC sheet on both sides and all as specified and directed.

S&F aluminium anodised sliding door bolt with hasp and stapple (bolt type) and fixing clip of sheet, cast or extruded section and fixing bolt and sliding bolt of 300 mm long all as specified and directed.

S&F butt hinges cold rolled mild steel medium weight 100 mm size all as specified and directed.

All as per item No 62 above but 75 mm size all as specified and directed.

S&F extruded aluminium bow handle fabricated type 150 mm size all as specified and directed.

S&F extruded aluminium bow handle fabricated type 100 mm size all as specified and directed.

S&Faluminium anodised barrel tower bolt of extruded section 200 mm long all as specified and directed.

All as per item No 66 above but 150 mm long all as specified and directed.

S&F aluminium hinges of size 100 mm by welding to existing frame including all as specified and directed.

S&F in repairs aluminium extruded alloy handles fabricated type for aluminium door anodisd of size 150mm all as specified and directed.

S&F in repair floor door stopper 150mm of aluminium alloy body and tongue, anodised with hard drawn steel spring, overall length of cover plate 100mm all as specified and directed.

M&L for welding in repairs to steel windows/doors exc 2.5 cm but n. exc 5.00 cm in length and thikness of metal to be welded n. ec 6mm complete all as specified and a directed.

Re-securing or easing and adjusting without taking down shutters of any description exc 1 sqm an n.exc 2 sqm each all as specified and as directed.

M&L for preparing surface of new wood & steel of any descrition not other wise described and treated with tar or coal tar black paint all as specified and directed.

M&L for preparation of new wooden surface over 10 cm width or grith and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed.

Taking out old serviceable glass/fiber sheet from metal frame and hacking out old putty/glue etc and fixing in its original position after cleaning, with new oil putty/glue and glazing clip complete all as directed by Engr-in-Charge.

Hacking out old broken glass/sheet of any thickness size, quality or description from metal frame including punching or drilling out old glazing pins/spring clips etc complte all as specified and as directed.

S&F 4.5mm thick Transparent fibre sheet in window pane including putty/silicon complete all as specified and directed.

S &F CP Urinal spreder fixed in repairs all as specified and directed.

S&F in repairs 32mm dia PVC flexible waste pipe of length exceeding 60cm but not exceeding 90cm with connector suitable to connect the pipes with waste fitting/ coupling of WHB/ sink/ urinal complete all as directed by Engr-in-Charge.

M&L for 50mm thick PUF panel with 0.5mm PPGL ribbed sheet on both sides with a layer of rigid CFC free polyurethane form of density 30 to 40 kg/cum an insulation with toungue and groove joints. Make: TATA/Jindal all as specified and directed.

M&L for 40mm thick PUF panel with 0.5mm PPGL ribbed sheet on both sides with a layer of rigid CFC free polyurethane form of density 30 to 40 kg/cum an insulation with toungue and groove joints. Make: TATA/Jindal all as specified and directed.

M&L for 30mm thick PUF panel with 0.5mm PPGL ribbed/plan sheet on one side & other side corrugation/high ribbed 0.5mm thick PPGI sheet with a layer of rigid CFC free polyurethane form of density 30 to 40 kg/cum an insulation with toungue and groove joints. Make: TATA/Jindal all as specified and directed.

S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws all as specified and directed.

Three in one Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed all as specified and directed.

S & F Rolled mild steel roof trusses (framed) trussed, purlins rail and fastenings and havey brackets framing (Beam, tee, angle, channels or flat sections) including distance pieces, cleats etc conforming to Fe-290 (Gde E 165) all as specified and directed.

S&F in repairs 32mm diaBottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms/) WHB/ sink/ urinal complete all as directed by Engr-in-Charge.

S&F of CP brass twoeway bib tap 15 mm dia long body fancy type chromium plated fixed in repairs all as specified and directed.

M&L for preparation of old surface of concrete of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of primere complete all as specified and directed.

M&L for preparation of surface of steel and iron of any description over 10 cm width or girth, not oterwise described and applying two coat of synthetic enamel paint over a coat of red oxide, zinc chcome primer complete all as specified and directed.

S&F in repairs Harrison rails, mild steel, chromium plated with fixing brackets,stops, rollers etc all as specified and directed.

S& F of factory made Box typeSteel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with/without glazing bars, dovetailed or welded incl two coats of synthetic enamel paint over a coat of red oxide All as per drg No CEKZ/TD/630R/2016(Wiremesh & Glass sheet measured and paid seperatly all as specified and directed.

Taking down chowkhats of frame with shutter (with out taking of shuttors from the frame)n. exc 1.5 Sqm each all as specified and directed.

Galvanised mild steel wire cloth,but 0.56mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks, or galvanised wire staples all as specified and directed.

M&L 75mm thick PCC M-10 (1:3:6) type (using 40 mm graded crushed stone aggregate) as in plinth protection complete all as specified and directed.

M&L for brick work sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in cement mortar (1:6) all as specified.

M&L for rendering 15 mm thick on fair faces of brick surfaces in cement mortar (1:6) and finished even and smooth without using extra cement complete all as specified.

M&L for rendering 15 mm thick on fair faces of brick surfaces in cement mortar (1:4) and finished even and smooth without using extra cement complete all as specified.

M&L applying two coat of cement base paint with priming coat incl preparation new plastered surface all as specified and directed

S&F of CP brass twoeway angle cock 15 mm dia long body fancy type chromium plated fixed in repairs all as specified and directed

S&F GI Frame work of Size of gird 600mm x 600mm for seamless ceiling comprising of GI perimeter channel0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and webof 45mm suspended from soffit at approx 900mm centre with GI cleat and steel expansion fasteners with and including ceiling section (not exe 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre all as specified and directed

S&F sand Gypsum board false ceiling of 600mm x 600mm, 9mm thick plain Foil back suitably placed in flase ceiling gird made of aluminium/GI/ME as per specification and drawing all as specified and directed.

Hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long completed all as specified and directed.

Note: In case doubling/duplicancy of BOQ items , the lowest quoted rate shall be applicable for payment.

SCHEDULE OF CREDIT

ANIMA ENTERPRISE

BHARAT TRADERS

ANSH CONSTRUCTION