SPECIAL REPAIR TO BLDG NO P-283 (OR COOK HOUSE CUM DINING HALL) AT HQ SFF CAMP AND 5LU BLDGS/ COMPLEX AT AFND UNDER AOR OF GE (AF) FARIDABAD

Amount

Demolition of brick work or stone / boulder masonry including all quoins, arches, pillars, etc. built in cement mortar complete all as specified and directed.

M&L for Brick work with subclass 'B' bricks (old size bricks), straight or curved on plan exc 6m mean radius, built in cement mortar (1:6), complete all as specified and directed.

All as per item No 02 above but except bricks

M&L for Brick work with sub class ‘B’ bricks (old size brick) straight or curved on plan to any radius in half bricks thick walls, built in cement mortar (1:4), complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick or concrete surfaces in cement plaster (1:6), complete all as specified and directed.

M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings, complete all as specified abd directed. Note:- Payment for providing grooves shall be made separately.

M&L for Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove, complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement plaster (1:4) using WPC as manufacturer instructions (WPC shall be measured and paid separately), complete all as specified and directed.

Supply only liquid WPC, complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar (1:3) over concrete surface as on ceiling, chhajja, shelves etc to match with existing surfaces finish even and smooth without using extra cement, complete all as specified and directed. .

M&L for preparing newly plastered or previously untreated walls surfaces and applying two coats of cement base paint over one coat of alkali primer complete all as specified and directed.

M&L for newly plastered or previously untreated wall surfaces and applying three coats of white wash, complete all as specified and directed.

M&L for preparation of new plastered surface and applying two coats of oil emulsion distemper on wall over a coat of primer including one layer of 3mm thick wall care putty on new plastered surfaces and obtain smooth finish using sand paper, complete all as specified and directed.

M&L for preparation of new plastered surface and applying two coats of oil emulsion distemper on ceiling over a coat of primer, incl one layer of 3mm thick wall care putty on new plastered surfaces and obtain smooth finish using sand paper, complete all as specified and directed.

M&L for 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base of flooring, complete all as specified and directed.

M&L for 50 mm thick PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in plinth protection / path/ any paved area, complete all as specified and directed.

M&L for 100 mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in plinth protection / path/ any paved area, complete all as specified and directed.

M&L for ulta/double charged / HD fully Vitrified tiles 9 to 10mm thick (square/rectangular) polished, area of each tiles exc 0.42 sqm but not exc 1.00 Sqm in floors, skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in cement mortar (1:4) for laying floor finishes, including dismantling / demolition of existing surface and rubbish off the primises etc, complete all as specified and directed.

M&L for fully Vitrfied tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.36 sqm but n exc 0.42 sqm, in floors, dado, skirting etc, set and jointed in neat cement slurry over 15 mm thick screed bed or bedding layer in cement mortar (1:4) for laying floor finishes and pointed in white or coloured cement to match and including dismantling / demolition of existing surface and rubbish off the primises etc, complete all as speciefied and directed.

M&L for Non-skid ceramic tiles, coloured, Size 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer of cement mortar (1:6), including dismantling / demolition of existing surface and rubbish off the primises etc, complete all as specified and directed.

M&L for Glazed ceramic, Jointless, coloured tiles, size 300mmx450mm/350x600mm, thickness not less than 7mm as in vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry and pointed with white cement and pigment to match, laid over and including 10mm thick plastering in cement mortar (1:4), including dismantling / demolition of existing surface and rubbish off the primises etc, complete all as specified and directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per specification and drawing, including tacking down old U/S frame, complete all as specified and directed.

S&F factory made soilid panel PVC Door shutter 30mm thick (Style) consisting of frame made out MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having PVC sheet stripof 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail, & bottom rail; Panneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing, including taking down U/S shutter, complete all as specified and directed.

S&F for Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick wood grain Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as specified and directed.

S&F for Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified.

S&F for stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden beads, complete all as specified and directed.

S&F 100mm butt hinges, medium weight, cold rolled mild steel and fixed, complete all as specified and directed.

M&L for preparation of old surfaces by removal of existing treatment and applying two coats of oil emulsion distemper over a coat of primer on surface of walls incl one layer of 3mm thick wall care putty on old scraped surfaces and obtain smooth finish using sand paper, complete all as specified and directed.

M&L for preparation of old surfaces by removal of existing treatment and applying two coats of oil emulsion distemper on ceiling over one coat of primer including one layer of 3mm thick wall care putty on old scraped surfaces and obtain smooth finish using sand paper, complete all as specified and directed.

M&L for preparation of old surfaces on wall/ceiling to obtain smooth finish using sand paper including complete removal of existing treatment and applying two coats of plastic emulsion paint over a coat of acrylic primer including 3 mm thick wall care putty for smooth surface as per manufacturer instructions, complete all as specified and directed.

M&L for preparation of old surfaces of wall by removal of existing treatment and applying two coats exterior weather paint of Acrylic emulsion over a coat of primer on surface including one layer of 3mm thick wall care putty on old scraped surfaces and obtain smooth finish using sand paper, complete all as specified and directed.

M&L for preparation of old surfaces on wall/ceiling surface to obtain smooth finish using sand paper including complete removal of existing treatment and apply on roof boarder, drops, fins, chajja / roof facia, column etc and applying two coats of exterior emulsion paint with camouflage pattern, over and inclduing 3mm thick wall care external putty and a coat of acrylic primer as per manufactures instruction, complete all as specified and directed.

M & L for preparation of old plastered surface of wall and applying one coat of white wash complete all as specified and directed.

M & L for removal of existing treatment and preparation of old plastered surface of wall/ceiling inclding applying two coats of white wash complete all as specified and directed.

M&L for providing RCC Nominal mix type B-1 (1:2:4) using 20mm graded stone aggregate incl necessary formwork and providing plaster in cement mortar (1:3) and apply two coats of finishes to match existing finshes over a coat of primer for RCC projected portion as in facias, fins upto a height of 30 cm facia etc including demolition of existing and providing TMT bars if reqd all as specified and directed. Note:- length of fins, facias shall be measured irrespective of any thickness and height.

M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for mild steel TMT bars 6 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for reparing of RCC projection, chajja, roof facia, celling by scrapping, cutting, de-rusting and cleaning exposed reinforcement surfaces of damaged loose RCC surface and applying neat cement slurry @ 3 kg/Sqm and filling the surface with cement plaster (1:3) one or two layer as required or PCC type B-O (1:2:4) using 12.5 mm graded stone aggregate as directed by Engr-in-Charge with or without facia and smooth finished and smooth edges incl two coats of finished to match with the existing surface at any height and in any situation including necessary form work, complete all as specified and directed.

M&L for repair of RCC slab, column, beam, chajja, facia etc by removing of old portion of concrete and cleaning/brushing and removing of loose concrete/applying required cement slurry @ 3.5 kg/sqm making good with concrete 1:1.5:3 and applying 3 mm thick cement mortar (1:4) and finish the surface all as specified and directed. Note : length of fins, facias shall be measured irrespective of any thickness and height.

Taking down chowkat or frames with shutters (without taking off shutters from the frames) n.exc 1.5 Sqm each including cutting holes for taking out hold fasts, dismantling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost), complete all as specified and directed.

Taking down chowkat or frames with shutters (without taking off shutters from the frames) exc 1.5 Sqm but n exc 4 sqm each including cutting holes for taking out hold fasts, dismantling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost), complete all as specified and directed.

Taking down Shutters of any description n exc 1 sq.m each, complete all as specified and directed.

Taking down shutters exc 1 Sqm and n exc 2 Sqm each, complete all as specified and directed.

Taking down shutters exc 1 Sqm and n exc 2 Sqm each and refixing in same opening incl easing, adjusting and renewal of screws, complete all as specified and directed.

M&L for pressed steel frames of size 105mmx60mm for doors with one or more rebates fabricated out of 1.25mm thick mild steel sheet including necessary fixing lugs, butt hinges (100mm medium weight-03 Nos), lock strike plate with and including filling of hollow portion in PCC 1:3:6 type C1 using 20mm graded crushed stone aggregate and making good the existing surface in cement mortar (1:6), complete all as specified and directed.

S&F for 35mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides and one face is covered with decorative face veneer with lipping/frame to match, complete all as specified and directed.

S&F Aluminum anodized frame for doors, windows, ventilators powder coating (Min thickness of powder coating 50 micron) with one or more rebated including jointing cleats for fixing etc, complete all as specified and directed.

S&F Aluminum anodized door shutters, aluminum section weighing 0.55 Kg/m including necessary, jointing cleats, glazing clip, rubber neoprene packing handles two nos in each door, hinges three nos in each leaf, anodized snap beading screws etc powder coating of any colour (Thickness of powder coating not less than 50 micron) complete all as specified and as directed.

S&F Aluminum anodized window and ventilator shutters side hung type without sash , aluminum sections weighinh 0.55 Kg/m including necessary jointing cleats, glazing clips, rubber packing anodized aluminum snap beading screws anodized aluminum fittings such as peg stays 150mm long (one no) hinges type B-21 100mm long (2 no) suitable handle (01 no) for each leaf ,powder coating of any colour (Thickness of powder coating not less than 50 micron) complete all as specified and as directed.

S&F aluminium Anodized powder coated(Thickness of powder coating shall not be less than 50 micron) fixed frame of partiton or fixed window / ventilator , aluminium section weighting not less than 0.55kg/RM incl 4.8mm thick sheet glass oridinary quality 'frosted glass or ACP sheet joining with rubber beading , aluminium snap beading, complete all as specifed and directed

S&F aluminium wire guard mesh of 4mm nominal dia of wire and average width of aperture 75 - 85mm and fixed with aluminium frame / staples, complete all as specified and directed

S&F of door closer hydraulically regulated design No 2etc complete all as specified and as directed

S&F 150mm aluminium, anodised, barrel tower bolts of extruded section etc complete all as specified and directed.

S&F 150 mm Aluminium handles, cast type, anodised of extruded section complete all as specified and directed.

S&F 250mm long aluminium alloy, anodised, sliding door bolt of 16mm dia with hasp, staple (bolt type) and fixing clips of sheet, extruded sections and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.

S&F for 3mm thick figured glass, pin head type and glazing with oil putty in squares not exceeding 0.5 sqm in each pane, complete all as specified and directed.

S&F for 4.8 mm thick float glass ordinary quality' frosted glass and glazing with aluminum beeding and gasket to aluminum framework in square exc 0.50 sqm in each pane in repair, complete, all as specified and directed.

S&F in repair 20mm dia, mild steel chromium plated curtain rod, with holder/bracket, stops, rollers etc, complete fixed in repairs, complete all as specified and directed.

S&F in repair for PVC hollow wall/Ceiling panelling of 8 to 10mm thickness, any colour/design approved by Engr-in-charge, inclusive of fixing on to wall/ceiling incl complete frame work required , moulding, end caps fixed with PVC sleeves and screws as required at site, including dismantling of old ceiling/panelling, complete all as specified and directed.

S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F in repair PVC hollow wall panelling 5 to 8 mm thick on ceilling/wall with necessary frame work, design and colour approved by Engr-in-charge, inclusive of fixing on to wall/ceiling incl moulding, end caps fixed with PVC sleeves and screws as required at site, including dismantling of old ceiling/panelling, complete all as specified and directed

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and directed.

S&F for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

M&L for painting on old steel and iron surfaces of any description with two coats of synthetic enamel paint over one coat of red oxide primer including preparation of old surfaces n exc.10 cm width or grith complete all as specified and directed.

M&L for preparation of old surfaces of steel of any description, over 10cm in width or girth not otherwise described, applying one coat opf synthetic enamel paint, complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel of any description , over 10 cm in width or girth not otherwise described applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer, complete all as specified and directed.

Excavating in post holes (or similar holes) each n.exc 0.5 cum, getting out, returning, filling in & ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface, complete all as specified and directed

M&L PCC (1:3:6) type C1, Using 20mm graded stone aggregate as in embedding of angle iron post etc, complete all as specified and directed.

S&F for Vitreous China squatting pan (Orissa pattern) size 580mm X 440mm, white with integral foot rests, any pattern including provision of cement concrete bedding (excluding flushing cistern and flush pipe), including taking down Old U/S existing squatting pan, complete all as specified and directed.

S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts and flushing cistern ) including Plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, vitrious Chaina, pedestal pattern WC incl PVC seat cover and flush pipe etc, complete all as specified and directed.

S&F in repair for Vitreous China wash basin oval shape, counter top, White, flat back, size 550x400 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets, complete all as specified and directed.

S&F in repair for Vitreous China Half stall type urinals, white, with geating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (excluding of fixing supply pipe, flushing cistern, flush pipe, trap and waste pipe) complete all as specified and directed.

S&F in repairs PVC valveless, syphonic action type flushing cistern, low level , white, with inlet ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern for 10 litres capacity complete all as specified and directed.

S&F in repair for CP towel racks with lower hanger, complete all as specified and directed.

Demolition of stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc. complete all as specified and directed.

Rounding to edges of stone slabs one edge , such as in steps, cooking platform , and other similar situtions, complete all as specified and directed.

M&L for Makrana white Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4), 10 mm thick, including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble, complete all as specified and directed.

M&L for Marble work of any shade other than white and black as per the diection of Engineer in charge, 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4), 10mm thick, including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble, complete all as specified and directed.

M&L for 18 to 20 mm thick, Kota stone slab flooring (Machine cut) with mirror polishing of any size, laid over and including 20mm thick bedding layer in cement mortar (1:6) over 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) in sub base of flooring for laying floor finishes over neat cement slurry @ 3Kg/sqm over sub base, jointed and pointed in grey cement mixed with pigment to match the shade of slab, including rubbing and polishing to achieve mirror finish, complete all as specified and directed.

M & L for coloured precoated chequered tiles of size 300 x 300 x 25 mm thick (colour and glazed approved by EIC) with grey cement and pigments, set, jointed and pointed in neat cement slurry ,over and including 15 mm thick screed bed or bedding layer of cement mortar 1:6, over new or existing sub-base in floors complete all as specified and directed.

M&L for Kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid over 10 mm thick 1:3 cement mortar jointed and pointed in grey cement mixed with pigment to match the shade of slab including rubbing and polishing to achieve mirror finish complete as in flooring all as specified.

S&F of 18-20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like, over and including 20 mm thick screed bed or bedding layer of cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including moulding, rounding of edgeing and dismantling existing flooring, complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for cement concrete (unreinforced) complete all as specified and directed.

Taking down existing roof treatment of any description and any type, complete all as specified and directed.

M&L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, incl brushing with neat cement slurry @ 3.0 kg of cement per sq. metre etc, complete all as specified and directed.

M&L, for rendering 10mm thick in Cement mortar (1:3) with WPC as per manufacturer instructions in sunken slab, complete all as specified and directed.

M&L for screed bed, 15mm thick in cement mortar (1:4) on brick work or concrete surface finish even and smooth (w/o using extra cement) incl WPC as per user manufacturer instructions, at any height etc, complete all as specified and directed.

M&L for preparation of roof surface/sunken portion and applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm including APP based polymeric membrane minimum weighing 3.6 kg/sqm and minimum 3 mm thick reinforced wih polyster non woven fabric (wt not less than 160 gms/sqm) laid on primed surface by forced application, joints to be tourched hot and width of overlaps shall not be less than 150 mm, complete all as specified and directed.

M&L for Plain cement concrete 1:7:12 type F-2 (using 40mm graded stone aggregate) as lean concrete in sunken portion, complete all as specified and directed.

M&L for PCC (1:2:4), type B-0, using 12.5mm graded stone aggregate as in roof padding and surface finished even and smooth without using extra cement, complete all as specified and directed.

M & L for providing cement concrete type B-0 1:2:4 using 12.5 mm graded stone aggregate as in roof kerb or mud stops, round on edges including necessary formwork, complete all as specified and directed.

Removing plants/shrubs from duct walls & junction with roots, using herbicide chemicals, from existing brick or concrete surfaces for multistoried building at any storeyed and at any height and match the surface with existing surface using cement mortar (1:3) , complete all as specified and directed.

M&L for Mirror polishing on Marble/Granite/Kota stone/stone work, required to give high gloss finish, complete all as specified and directed.

S&F for Soap tray, brass chromium plated and fixed to plugs on wall with brass screws, complete all as specified and directed.

S&F for Towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed.

S&F for Towel ring brass chromium plated, fixed with brass screws and plugs, complete all as specified and directed.

S&F for PVC connections 45/60cm long superior quality with PTMT nut on both side,complete all as specified and directed.

S&F in repair grating, round type, 100 mm size of CP complete all as specified and directed.

S&F in repair grating, round type, 125 mm size of CP complete all as specified and directed.

Dismantling water tanks Exc 500 Ltr & not exceeding 1000Ltr and S&F rotational moulded polythene, triple layers, water storage tank 1000 Ltr capacity, closed top, cylindrical, hoisted and fixed in position including S&F 20mm bore PTMT ball valve epoxy coated minium weight 210gms with aluminium rod, complete all as specified and directed

S & F in repair 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.

S&F in repair 20mm bore brass ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule, complete all as specified and directed.

S&F in repairs 15mm bore bib taps, chromium plated, fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

S&F in repairs stop valve/angle valve, 15mm dia chromium plated, fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.

S&F in repair Stop cock, concealed, long shank, chromium plated, fancy type, 15 mm bore, screwed down high pressure with crutch or butter fly handle, complete all as specified and directed.

S&F for wall mixer, 15mm bore with provision for overhead shower with 115 mm long bend pipe on upper side, connecting legs and wall flanges, complete all as specified and directed.

S&F in repair 15mm bore, swan neck, pillar tap, cast copper alloy, with capstan heads, fancy type chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F Towel Rail 600 mm long of PTMT fixed with and including Chromimum plated brass screws and wooden plastic cleats (Min weight 190 gms) complete all as specified and directed.

S & F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws embedded in the wall all as specified and directed.

S&F for 20mm dia Nipple suitable for HDPE water tank.(Minimum weight 20mm 45gms) complete all as specified and directed.

S&F 15 mm dia Unions. brass to connect iron to polyethylene and fixed complete all as specified.

S&F 20 mm dia Unions. brass to connect iron to polyethylene and fixed complete all as specified.

S&F stainless steel pegset of six suitable size of length, complete all as specified and directed.

S&F 25mm dia Decorative/ fancy type stainless steel curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing PVC/steel conduit pipes with accessories complete all as specified and directed. Note : The cost of brackets and knobs is deemed to be including in the quoted rate. nothing extra shall be paid on this account.

S&F for GI tubing 15mm bore 'medium grade' with all fittings and fixed complete to wall and ceiling or laid in floors etc incl cutting chases in brick wall, pinning in, making good in cement mortar (1:3) to facings where required, including taking down Old U/S GI tubing 15mm dia., complete all as specified and directed.

S&F for GI tubing 20mm bore 'medium grade' with all fittings and fixed complete to wall and ceiling or laid in floors etc, including taking down Old U/S GI tubing 20mm dia., complete all as specified and directed.

S&F for GI tubing 25mm bore 'medium grade' with all fittings and fixed complete to wall and ceiling or laid in floors etc, including taking down Old U/S GI tubing 20mm dia., complete all as specified and directed.

S&F for 110mm bore PVC pipes single socketed Pressure rating @4Kg/Sq cm length "medium grade " with rubber ring joint, fixed to walls with dash ture nut and bolt at every 2 mtrs length, incl taking down old U/S pipe with all fittings, complete all as specified and directed.

All as per item No 120 above but laid in trench or in floor

S&F for 110mm bore PVC bends/junction any radius complete all as specified and directed. .

S&F for 110mm bore PVC bends/junction with access door any radius complete all as specified and directed. .

S&F for 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed. .

S&F for 75mm dia PVC (SWR) multi floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed. .

S&F for 75 mm bore PVC pipes single socketed Pressure rating @4Kg/Sq cm length "medium grade " with rubber ring joint, fixed to walls with dash ture nut and bolt at every 2 mtrs length complete, including taking down Old U/S pipe with all fittings, complete all as specified and directed.

All as per item No 126 above but laid in trench or in floor

S&F for 75 mm bore PVC bends/junction any radius complete all as specified and directed. .

S&F in repair for 100mm bore Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors incl taking down old pipe, complete all as specifed and directed.

S&F in repair for 100mm bore Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls etc, incl taking down old pipe, complete all as specifed and directed.

S&F in repair for 75mm bore Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints,laid in trenches or in floors etc, incl taking down old pipe, complete all as specifed and directed.

S&F in repair for 75mm bore Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls etc, incl taking down old pipe, complete all as specifed and directed.

S&F in repair for 100mm bore CI bends (any radius), diminishing pieces or tapers (larger bore measured), complete all as specifed and dirtected.

S&F in repair 75mm bore CI bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specifed and directed.

S& F in repair for 75 Cast Iron Cowl complete all as specifed and directed.

S& F in repair for 100 Cast Iron Cowl complete all as specifed and directed.

S&F for repair CI inspection eye plates/cover of size up to 100 mm dia as in repairs of any location including gasket and nuts etc, complete all as specified and directed.

S&F in repair Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

Removing/getting out of excavated material/spoils/debris dumped at site to a distance exceeding 500 m but n exc 1.5 km and depositing where directed at a level n. exc 1.50 m above the starting point, complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket, bell or power) complete including all electrical fittings & fixtures(DBs, submain,cables etc) and making good disturbed surfaces of wall , floor etc and matching wth original colour of wall, complete all as specified and directed.

M&L for one light/fan/exhaust fan point wiring controlled by one switch with PVC insulated unsheathed multi stranded copper conductor (FRLS) of size 1.5 Sqmm (for Phase colour code Red and for Neutral colour code Black) and one run of size 1.5 Sqmm PVC insulated unsheathed multi stranded copper conductor (FRLS) (as earth wire, colour code green) and connected to common earth dolly all as specified. , drawn through in and in existing concealed / surface PVC Conduit/ saddle medium grade, ISI marked 20 mm dia along with conduit fixing accessories and with pressed steel terminal box thickness 1.6 mm painted with one coat of black bituminous paint as a primary and two coats of enamel paint with 3 mm thick laminated sheet (Make: Hylam) for provision of switches/regulators, complete all as specified and directed.. NOTE:-After rewiring cutting chasing portion should be matched with existing finishes of walls.

All as per item No 141 above but 5 Amp socket outlet, independent, complete all as specified and directed.

All as per item No 141 above but on the same board, complete all as specified and directed.

All as per item No 141 above but 2.5 sq mm wire for one 15 Amps socket outlet independent with continuous PVC insulated single core green colour copper earth wire of size 2.5 sq mm connected to common earth dolly, complete all as specified and directed.

Supply & fixing of switch piano type 5 amp SP one way ISI Marked, complete all as specified and directed.

Supply & fixing of switch 15 Amps SP one way ISI Marked, complete all as specified and directed.

Supply & fixing of socket outlet 3 pin 5 Amps flush type, complete all as specified and directed.

Supply & fixing of socket outlet 2-in-1, 3 pin 5 amps and 15 amps flush type, complete all as specified and directed.

Supply & fixing of stepped type electronic fan regulator flush type on the existing phenolic sheet etc, complete all as specified and directed.

S&F ceiling rose,3 phase/PVC/Polycarbonate,isolated body after dismantling old one, complete all as specified and directed.

Supply and fixing in replacement of SPN enclosere with two pin and earth plug and socket complete with one SP MCB 25 Amps, complete all as specified and directed.

M&L PVC insulated FRLS single core with strandard copper cable of size 6 Sqmm in two run and 6 Sqmm one run for earth and drawing through existing concealed conduit including taking down old UNSV cable, complete all as specified and directed. NOTE :- 2 runs of 6 Sqmm cable and one run of 6 sqmm cable will be measured as one running meter for the purpose of measurement and payment.

M&L PVC insulated FRLS single core with strandard copper cable of size 4 Sqmm in two run and 4 Sqmm one run for earth and drawing through existing concealed conduit including taking down old UNSV cable, complete all as specified and directed. NOTE :- 2 runs of 4 Sqmm cable and one run of 4 sqmm cable will be measured as one running meter for the purpose of measurement and payment.

S&F in replacement wall mounting box type LED tube light fitting , extruded aluminium heat sink provided for efficient heat dissipation & Integrated electronic driver 1x20 watt comprising of strong jointless CRCA body complete with all accessories, complete all as specified and directed.

S&F in replacement MCB DB SPN 6 Way factory made IP 42 protection class metal double door with 200 Amp rating bus bar 240 for fixing of MCBs/lsolators/RCCBs eto completed after dismantling old one, complete all as specified and directed.

S&F in replacement of MCCB 125 Amps 4 Pole 25KA 415V Volts, complete all as specified and directed.

S&Fix in replacement MCB DB TPN 6 Way factory made IP 42 protection class metal double door with 200 Amp rating bus bar 240 for fixing of MCBs/lsolators/RCCBs eto completed after dismantling old one, complete all as specified and directed.

Supply & fixing in replacement of MCB SP6 to 32 amps 230 Volt, complete all as specified and directed.

S&F in replacement of MCB SPN 32 Amps 230 Volts, complete all as specified and directed.

Taking down ceiling fan of any sweep from existing place and repair/replacement of UNSV each items, complete all as specified and directed.

S&F in replacement of ceing fan rod for hanging of fan suitable size and length, complete all as specified and directed.

M&L in replacement of ball bearing for fans of various size, complete all as specified and directed.

Supply and fixing and connecting flexible copper twisted twin core of size 23/.00076, complete all as specified and directed.

Supply and fixing capacitor 2.00 Mfd in replacement of old unsv item, complete all as specified and directed.

Supply and fixing capacitor 2 5 Mfd in replacement of old unsv item, complete all as specified and directed.

Supply and fix in repair BLDC fan Energy Efficicent ceiling fan Sweep size 1200mm with speed 350 RPM motor air delivery 220 CMM input power 28W-32W and having remote control, complete all as specified and directed. Note:- Old fan need to deposit in store no credit will be provided for the same.

Taking down exhaust fans of any size as per details given below and cleaning the dust properly. Oiling, greasing of ball and bearing including re-fixing and connecting, complete all as specified and directed.

M&L for rewinding of exhaust fan 250 mm to 300 mm sweep with supper enameled coper wire of suitable size of any make/type/model including transportation and old material to be deposited in stores, complete all as specified and directed.

Supply and fix in replacement of ball bearing of exhaust fan of any size, complete all as specified and directed.

Supply and fix FRESH AIR fan sweep 300 mm in replacement made up of sturdy engineering plastic complete with louvers shutter , voltage 230 V, 50 Hz 1200 RPM copper wound, complete all as specified and directed.

Supply and fxing in replacement 450mm wall mounted fan plastic body 240 v single phase 50 Hz, complete all as specified and directed.

Supply and fix exhaust fan sweep 400 mm in replacement made up of siurdy engineering metal body complete with louvers shutter, voltage 230 V, 50 Hz 1200 RPM copper wound, complete all as specified and directed.

supply and fixing in replacement wall mounted fan plastic body 300mm 240 v single Each phase 50 Hz , complete all as specified and directed.

Supply and fix exhaust fan sweep 250 mm, in replacement, made up of sturdy engineering metal body complete with louvers shutter, voltage 230 V , 50 Hz, 1200 RPM copper wound, complete all as specified and directed.

Supply and fix modular type gang box (3 module for one socket and one switch) suitable for 5/15amp 6 pin including plate cover, plastic sunken box, etc including suitable size of switches and sockets, complete all as specified and directed.

Supply and Installation of Solar water heating system ,Flat plate collector type,with heat exchanger of 300 ltr per day capacity ,with electrical heating backup, complete all as specified and directed.

Supply and fix 3 layer PP-R pipes SDR 7.4 & SDR 11UV stablised and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain and brass threaded polypropylene random fittings laid to walls,ceiling or in floor etc for bore pipe 25 mm OD, complete all as specified and directed.

S&F PP-R Gate valve (Brass insert) for bore of pipe 25 mm OD, complete all as specified and directed.

S&F 500 litres capacity rotational moulded polyethylene water storage tanks tripple layered (cylinderical vertical with closed top) hoisted and fixed in position, including necessary fittings, complete all as specified and directed.

S&F Structural steel work with Fe-290 (Gde E-165) with compound girders and stanchions,lattice girders,aerial masts,staging for water tanks and like including caps,bases,splices etc built up from two or more beam or channel sections or angles with plates ,including all lattice bars,stiffeners,gusset plates etc, complete all as specified and directed. Note :- For staging of water tanks 3.0 m high above the level of solar water heater as directed by Engr in charge.

Supply and fix 25 dia. Bib tap,cast copper alloy with crutch or butterfly handle ,screwed down ,screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

S&F of desert cooler, nominal capacity with wood wool pads cooler of steel body of 400 watt, sump capacity 100 litre, overall dimension 715x590x1140 mm3, including suitable size of stand, complete all as specified and directed.

Supply and fix in replacement of PVC casing capping of size upto 25mm to enclose and protect any unconcealed internal wiring of any sizing, complete all as specified and directed.

SAGAR ENTERPRISES (BID ID -3302814)

Singh Associates (BID ID -3308066)

M/S Yamin (BID ID -3300454)