Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
Tender Value
₹2.5 L
Closing Date
10 Jun 2021, 4:00 pmClosed
Executive Engineer PWD R and B Division Kathua
Executive Engineer PWD R and B Division Kathua
BOQ
2021_PWDJK_126245_1
e-NIT No. 35 of 2021-22/2328-29/G dt 04-06-2021
Open Tender
Civil Works - Roads
Item Wise
60 days
Kathua
NIT
6 documents required · 6 mandatory
₹600
Executive Engineer PWD R and B Division Kathua
Exempted
17 Jun 2021
4 Jun 2021
11 Jun 2021
4 Jun 2021
10 Jun 2021
4 Jun 2021
Amount
Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within all lead and lift as per direction of Engineer-in-charge.
Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) incl. all leads, lifts & carriage of material by MT/ H.L.
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more incl. all leads, lifts & carriage of material by M.T. / H.L.
Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platforms
Regrading terracing of mud phaska covered with tiles or bricks, in cement by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud phaska to proper slope, relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 (1 cement: 3 fine sand), including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded) incl. all leads, lifts & carriage of material by MT/ H.L.
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
Distampering with Oil Bound Distamper (Washable) of approved brand and manufacture to give an even shade on old work (two or more coats) excluding Priming coat
Finishing walls with water proofing cement paint of required shade (two or more coats applied @ 3.84 kg/10sqm)
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade. One or more coats on Old work
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.:
15mm dia nominal bore
20mm dia nominal bore
Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes 110 mm diametre
Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2mm thick
Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete.In colour such as White, Ivory, Grey, Fume Red Brown
Providing and fixing 25 mm thick shutters for cupboard etc, including ISI marked M.S. pressed butt hinges bright finished of required size with necessaryscrews:Panelled or paneled and glazed shutters of 2nd class deodar wood.
Providing and fixing white viterous China pedestal type water closet(European Type) with seat and lid, 10 litre low level white viterous china flushing Cistern and CP Flush bend with fittings and CI brackets , 40mm flush bend, overflow arrangement with specials of standard make & mosquito proof coupling of approved Municipal design complete.including painting of fittings& brackets, cutting and making good the wall and floors wherever reqd. W.C. Pan with ISI marked white solid plastic seat and lid
Providing and fixing Wash basin with CI Brackets , 15mm thick CP Brass pillar Taps, 32 mm C.P. Brass waste of standard pattern incl. painting of fittings and brackets.White viterous china wash basin size 630 x 450 mm with a single 15mm CP brass pillar Taps
Providing and fixing stainless steel A ISI 304(18/8) kitchen sink as per IS:13983 with CI Brackets and stainless steel plug 40mm incl. painting of fittings and brackets , cutting and making good the wall wherever required .kitchen sink without drain board 610 x 460 mm bowl depth 200mm.
Providing and fixing PVC Waste pipe for sink or Wash Basin incl. PVC waste fittings complete Semi Rigid pipe 40mm
Providing and fixing PTMT waste coupling for Wash basin and sink of approved quality and colour.Waste Coupling 38mm of 83 mm length and 77mm breadth weighing not less than 60 gms
Providing and fixing 15mm nominal Bore C.P. Brass Bib cock of approved quality conforming to IS: 8931
Providing and fixing 15mm nominal Bore C.P. Stop Cock(concealed) of standard design & of approved make conforming to IS: 8931
Providing and fixing 15mm nominal Bore C.P. brass angle valve for basin mixer and Geyser points of approved quality conforming to IS: 8931
Renewing glass panes and re-fixing existing wooden fillets: Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm)
Providing and fixing Aluminium Handles ISI Marked anodised (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour or shade with necessary screws etc. complete
Providing and fixing Aluminium tower bolts ISI Marked anodised (anodic coating not less than grade AC 10 as per IS :1868 transparent or dyed to required colour or shade with necessary screws etc. complete
Providing and fixing Aluminium Hanging floor door stoppers ISI Marked anodised (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour or shade with necessary screws etc. complete Twin Rubber Stopper
Engaging Carpenter for minor repair of different wood works.
Cleaning of Septic Tank & adjoining side Drains by engaging Sweepers including removal of mulba as per direction of Engineer-in-charge.
Engagging plumber for Minor Sanitary works repair.
BISHVJEET SINGH JAMWAL
Bharti Sharma
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .