Loading…
Loading…
Tender Value
₹3.3 Cr
EMD Value
₹6.6 L
Closing Date
1 Jul 2026, 11:00 am
Hubballi Division :- SW-I) Improvement to personnel department staff halls, conference hall, officers chamber and washrooms at Rail soudha Hubballi. SW-II :- Improvements to windows, flooring, kitchen of Type IV and Type IV Spl Quarters at Brook road officers colony, Hubballi.(Maintenance Period: 06 Months)
09UBL26-27DT010626ITEM05
09UBL26-27DT010626ITEM05
Open
6 Months
Dharwad, Karnataka
₹0
₹6.6 L
3 Jun 2026
3 Jun 2026
17 Jun 2026
Item Breakup - D-SCH D SW I
of 88 mm, weighing not less than 190 gms. 17.74 Providing and fixing PTMT shelf 440 mm long, Each 4 713.2 2852.8 124 mm width and 36 mm height of 49 approved quality and colour, weighing not less than 300 gms. HUBLI DIVISION-ENGG/SOUTH WESTERN RLY 17.75 Providing and fixing PTMT 15 mm Urinal Each 4 107.2 428.8 spreader size 95x69x100 mm with1/2" BSP 50 thread and shapes, weighing not less than 60 gms. 17.81 Providing and fixing floor mounted, white Each 2 18212.9 36425.8 vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china 51 cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. 18.0 WATER SUPPLY 18.7S C.P.V.C. PIPES Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & 18.8 fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 52 18.8.1 15 mm nominal dia Pipes Metre 40 497.8 19912 18.15S BRASS FITTINGS Providing and fixing brass bib cock of 18.15 approved quality : 53 18.15.1 15 mm nominal bore Each 10 353.25 3532.5 Providing and fixing uplasticised PVC 18.21 connection pipe with brass unions : 18.21.2 45 cm length 54 18.21.2.1 15 mm nominal bore Each 4 97.75 391 18.49S C.P. BRASS FITTINGS Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS 18.50 standards and weighing not less than 810 gms. 55 18.50.1 15 mm nominal bore Each 4 820.7 3282.8 18.59S AIR VALVE & WATER METER (BULK TYPE) Providing and fixing Stainless Steel pipe and fitting of grade AISI 304 as per JIS standard 3448 complete with press type fitting (fitting shall be paid for separately) including fixing of the pipe with clamps at 1.00 m spacing 18.85 including cutting and making good the walls including testing of joints complete as per direction of Engineer-in-charge. (The pipe length inserted in the fitting shall not be measured for payment) Internal work - Exposed on wall 56 18.85.5 42.70 mm outer dia Pipe Metre 15 943.9 14158.5 Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V- 18.89 profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge. Slip Coupling/ Socket 57 18.89.5 For 42.70 mm outer dia pipe Each 4 256.1 1024.4 HUBLI DIVISION-ENGG/SOUTH WESTERN RLY Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V- 18.92 profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge. Equal Tee 58 18.92.5 For 42.70 mm outer dia pipe Each 4 1088.3 4353.2 21.0 ALUMINIUM WORK 21.1S General Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ 21.1 neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion 21.1.1.3 Polyester powder coated aluminium Kg 250 539.85 134962.5 59 (minimum thickness of polyester powder coating 50 micron) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings 21.1.2 wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2.3 Polyester powder coated aluminium Kg 200 643.45 128690 60 (minimum thickness of polyester powder coating 50 micron) Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene 21.3 gasket etc. complete as per the architectural drawings and the directions of engineer-in- charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.1 With float glass panes of 4.0 mm thickness Sqm 60 1176.8 70608 61 (weight not less than 10kg/sqm) Total 5935276.76
Item Breakup - D-SCH D SW II
of 88 mm, weighing not less than 190 gms. 17.81 Providing and fixing floor mounted, white Each 66 18212.9 1202051.4 vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china 50 cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. 18.0 WATER SUPPLY 18.7S C.P.V.C. PIPES Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 18.7 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. ( Internal work - Exposed on wall ) 51 18.7.2 20 mm nominal dia Pipes Metre 400 335 134000 52 18.7.6 50 mm nominal dia Pipes Metre 100 934.15 93415 18.15S BRASS FITTINGS Providing and fixing brass stop cock of 18.16 approved quality : 53 18.16.2 20 mm nominal bore Each 66 379.2 25027.2 Providing and fixing C.P. brass shower rose 18.22 with 15 or 20 mm inlet 54 18.22.2 150 mm diameter Each 66 222.35 14675.1 18.59S AIR VALVE & WATER METER (BULK TYPE) 18.65 Providing and fixing PTMT soap Dish Holder Each 66 111.45 7355.7 having length of 138mm, breadth 102mm, 55 height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. 21.0 ALUMINIUM WORK 21.1S General HUBLI DIVISION-ENGG/SOUTH WESTERN RLY Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ 21.1 neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion 21.1.1.1 Anodised aluminium (anodised transparent or Kg 2000 495.05 990100 56 dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings 21.1.2 wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2.1 Anodised aluminium (anodised transparent or Kg 2000 598.6 1197200 57 dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene 21.3 gasket etc. complete as per the architectural drawings and the directions of engineer-in- charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.2 With float glass panes of 5 mm thickness Sqm 461.12 1505.25 694100.88 58 (weight not less than 12.50 kg/sqm) Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of 21.4 cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in- charge. 21.4.1 With stainless steel cover plate minimum Each 50 2823.85 141192.5 59 1.25 mm thickness 21.13 Providing and fixing Brass 100mm mortice Each 50 528.85 26442.5 latch and lock with 6 levers without pair of 60 handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. 22.0 WATER PROOFING 22.1S General HUBLI DIVISION-ENGG/SOUTH WESTERN RLY 22.5 Providing and laying water proofing Sqm 167.2 617.05 103170.76 treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 61 hours.(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. Total 41053882.97
Item Breakup - D2-SCH D2 SW I
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
TenderDocument6.1newasperACS.pdf Tender Document
ATTACHMENT
IRGCCApril2022newasperACS.pdf
ATTACHMENT
JPOCirculardated22.05.2024.pdf
ATTACHMENT
NEFTFORM.pdf
ATTACHMENT
AnnexureVGCCcorrespondence.pdf
ATTACHMENT
BGverificationletter_compressed.pdf
ATTACHMENT
ACSItoXI_compressed_1.pdf
ATTACHMENT
TenderDocument6.1newasperACS.pdf
ATTACHMENT
Download all tender documents and submit your bid