Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹49.6 LAccepted-AOC | L1 | Accepted-AOC lowest bidder | |
| 2 | L2₹50.0 L+₹35,356.11 (0.71%)Rejected-Finance | L2 | Rejected-Finance Highest bidder | |
| 3 | L3₹50.0 L+₹37,107.01 (0.75%)Rejected-Finance | L3 | Rejected-Finance Highest bidder | |
| 4 | L4₹50.3 L+₹68,619.40 (1.38%)Rejected-Finance | L4 | Rejected-Finance Highest bidder | |
| 5 | L5₹50.5 L+₹82,295.72 (1.66%)Rejected-Finance | L5 | Rejected-Finance Highest bidder |
Tender Value
₹47.5 L
EMD Value
₹95,000
Closing Date
1 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER I GOS
GARRISON ENGINEER I GOPALPUR MILITARY STATION PO GOLABANDHA DIST GANJAM ODISHA 761052
ADDN ALTN AND PROVN OF CERTAIN SANCTIONED WORKS AT GMS UNDER GE I GOS
2023_MES_574659_1
8000/58/22-23/0957/E8
Open Tender
Civil Works
Item Rate
180 days
GOPALPUR-ON-SEA
PLEASE REFER TENDER DOCUMENTS
6 documents required · 6 mandatory
₹500
Yes
GARRISON ENGINEER I GOS
₹95,000
Yes
24 Mar 2023
12 Jan 2023
3 Feb 2023
12 Jan 2023
1 Feb 2023
25 Jan 2023
Amount
Surface excavation n.exc 30 cm deep and getting out in Soft/loose soi, complete all as specified and directed.
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth; for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc. not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and getting out in Soft/loose soil , complete all as specified and directed.
Excavation in trenches not exceeding 1.5m wide andadditional 1.5 m or part thereof in depth beyond the first 1.5 m and getting out in Soft/loose soil, complete all as specified and directed.
M & L Plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete , complete all as specified and directed.
M&L for RCC, M-30 Design Mix Concrete (using 20mm graded aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc, basement slabs, under reamed piles and mass concrete complete all as specified and directed . Note - Reinforcement and form work shall be measured and paid separately.
Formwork to flat sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, complete all as specified and directed.
M&L for RCC, M-30 Design Mix Concrete (using 20mm graded aggregate) as inColumns,pillars,piers,posts and struts etc complete all as specified and directed.
Formwork to Square,rectangular or polygonal rough surface of concrete of sides of pillars, posts, struts, piers, columns and stanchions, complete all as specified and directed.
M&L for RCC, M-30 Design Mix Concrete (using 20mm graded aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified and directed.
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed.
M&L for RCC, M-30 Design Mix Concrete (using 20mm graded aggregate) as inSlabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like, complete all as specified and directed.
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed.
Returning, filling in of soft/loose soil including spreading, levelling, watering and well ramming in layers not exc 25 cm , complete all as specified and directed.
Removing surplus excavated earth (soil) to a distance n. exc 50 m & Depositing where directed at a level n. exc 1.5 m above the starting point, complete all as specified and directed.
S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips , complete all as specified and directed.
S&F Mild steel TMT bars 6 to 8mm dia and over, cut to length, spacers and binders and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips , complete all as specified and directed.
M & L brick work with fly ash bricks, Straight or curved onplan exc 6m mean radius,built in 1:6 in cement mortar , complete all as specified and directed.
M&L Brick work with Fly Ash bricks bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 in half brick thick wall, complete all as specified and directed.
M&l for providing precast cement concrete louvres and jallies 35 mm thick (measured solid) including all mouldings but excluding frame in cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregates and set in cement mortar 1:4 complete all as specified and directed.
M&L for rendering 15mm thick in CM 1:4 on brick or concrete surface, finishing even and smooth without using extra cement but using water proofing compound complete all as specified and directed.
M&L for rendering 15mm thick in CM 1:6 on brick or concrete surface, finishing even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 5mm thick in CM 1:3 on concrete surface of ceiling finishing even and smooth without using extra cement complete all as specified and directed.
M&L for 300mm thick Moorum / Red bajri filling in floors or pavings, laid in layers n.exc15 cm thick spread levelled and rammed incl watering etcall as specified & directed.
M&L Hard core of gauge n.exc 63 mm, deposited, spread, levelled in layers not exc 15 cm thick, watered and well rammed to a true surface.
M&L Cement concrete type D-2, 1:4:8 using 40 mm graded crushed stone aggreates 100 mm thick as in flooring finished even and fair complete all as specified and directed.
M&L 40mm thick PCC 1:2:4 damp proof course to horizontal or vertical surfaces including necessary formwork complete all as specified and directed.
M&L 50 mm thick PCC 1:3:6, type C-1 using 20 mm graded stone aggregate as in plinth protection, surfaces finished even and smooth with out using extra cement all as specified.(Note- Joint 12 mm wide to the full depth of pcc shall be provided at every 3 metres and at every change of direction and shall be filled with mixture of bitumen and sand 1:3 by weight. cost of this provision shall be deemed to be included in the quated rate for concrete in plinth protection, complete all as specified.
M&L three coats of white wash on new plastered ceiling surface including preparation of surfaces, complete all as specified and directed.
M&L for two coats of cement based paint over a coat of white wash after preparation of new plastered surface, complete all as specified and directed.
M & L for preparation of newly plastered surfaces of wall & concrete and applying 2 mm thick wall care putty including preparation , complete all as specified and directed.
M&L for applying two coats of oil bound distemper on wall or concrete over a coat of primer on prepared surfaces including, rubbing with sand paper , complete all as specified and directed.
Supply only water proofing compound ISI approved , complete all as specified and directed.
M&L rendering 10 mm thick in CM 1:3 , mixed with water proofing compound, on concrete surfaces of roof , surface finished even and smooth. (supply only of water proofing compound shall be measured and paid seperately)
S & F Powder coated three track Aluminium sliding window with frame not less than 1.8 mm thick excluding aluminium grill and including 5 to 5.5 mm thick tinted glass, beading & necessary rubber packing, locking & opening arrangement, all fitting and fixture complete all as specified and directed.
S&F 7mm thick aluminium grills of make "Decogrill' model DG 104 surrounded by aluminium 'C' channel with mesh size 75 X 75mm all as specified and directed.
S&F anodised glazed side hung door shutters with anodised aluminium frame of section of 100x44x2mm and bottom rail of 44.5x99x1.8mm including 5.5mm thick tinted sheet glass ordinary quality with all necessary suitable push & pull plate/handle , screw, jointing cleats, rubber packing aluminium snap beading and 1 No 200mm long Aluminium tower bolt, 100mm long 3 No Aluminium butt hinges B-21 Type and one No mortice brass lock 100 size 4 leaver (Vertical Type) with 01 No door closer Aluminium (Diie cast) body hydraullically regulated designation ;No 02 universal type, for each shutters , complete all as specified. (Door shall be size approx 1.2mx2.1 in single leaf)
S&F in repair Vitreous china bowl type Urinal flat back ,size 465x355x265 withgrating and Union for discharge pipe including all necessary items, complete all as specified and directed.
S&F viterious china squatting pan orissa pattern size 580x440mm white integal foot rest & including 10 lit cap flushing cistern PVC low level & flush pipe including concrete bedding & including P trap 100mm , complete all as specified and directed.
S&F in repair PVC low level flushing cistern (white) 10 Ltrs capacity with internal fitting, push button operated type with and including bracket, PVC flush pipe etc , complete all as specified and directed.
S & F in repairs, vitreous china wash basin, white, flat back, size 550x400mm with brackets, inc. cutting for & pinning in ends of brackets, inc. waste fitting, PTMT 32mm dia and pillar taps of PTMT 15mm dia , complete all as specified and directed.
S & F 20 mm bore 3 layer PP-R pipes SDR 7.4 & SDR 11 UV stablised and anti microbial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded PP-R fittings complete to walls, ceilings or in floors , complete all as specified and directed.
S & F 15 mm bore 3 layer PP-R pipes SDR 7.4 & SDR 11 UV stablised and anti microbial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded PP-R fittings complete to walls, ceilings or in floors complete all as specified and directed.
Cutting chases in brick walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth , complete all as specified and directed.
S&F 500 ltr capacity Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, complete all as specified and directed.
S&F 25mm dia ball Brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipes or brass ferrule and fixed as in PVC Service tanks , complete all as specified and directed.
S&F 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed to 20mm dia GI tube.
All as per Item No. 46 above but 25 mm dia.
S/F PVC(SWR)75mm bore pipes single socketed in any length with rubber ring joints fixed to walls/floor, complete all as specified and directed.
All as per Item No. 48 above but 110mm
S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed.
S&F PVC (SWR)bend 110mm bore, complete all as specified and directed.
S&F PVC (SWR)bend 75 mm bore, complete all as specified and directed.
Supply and fixed PVC (SWR) vent cowl, 110mm dia , complete all as specified and directed.
Supply and fixed PVC (SWR) vent cowl, 75mm dia , complete all as specified and directed.
S&F stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall pipe complete all as specified and directed.
PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement, complete all as specified and directed.
S&F glazed ceramic colored tiles (Premium quality) 200x300x6 to 7mm thick coloured on vertical surface such as dado/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tile including rendering 10 mm thick on brick or stone masonry surfaces finished fair and even to recieve tile in CM 1 : 4 complete all as specified and directed.
M&L for Non Skid ceramic tiles 7 to 8 mm thick(square/ rectagular) area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match , including 15mm thick screed bed in CM 1 :6 complete all as specified and directed.
S&F 15 mm fancy type concealed type stop valve cast copper alloy chromium plated screwed high pressure with crutch or butter fly handle screwed both ends for iron or union and fixed to 15 mm GI tube complete all as specified and directed.
S&F 15 mm fancy type stop valve cast copper alloy chromium plated screwed high pressure with crutch or butter fly handle screwed both ends for iron or union and fixed to 15 mm GI tube , complete all as specified and directed.
S&F 15mm bore bib tap cast copper alloy chromium plated with crutch or butterfly handle fixed to 15 mm dia GI tube all as specified and directed.
S&F PVC LDPE waste pipe of pressure rating 6kg/cm2 of 32mm dia pipes, complete all as specified and directed.
S&F PVC connection 15mm size with PTMT nuts of length 450mm , complete all as specified and directed.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and directed.
S &F Factroy made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with het moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuch inside with solvent cement for stiles and plan colour PVC sheets for top rail, lock rail & bottom rail on either side & as fap insert for top rial & bottom rail, Penelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement suppling & fixing in the frame at site as per specification & drawing.
M&L butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised type B-21 for 100 mm long complete all as specified and directed.
S&F extruded aluminium alloy handles fabricated type anodised of 150 mm size complete all as specified and directed.
S&F aluminium, anodised, barrel tower bolts of extruded section 150 mm long complete all as specified and directed.
M & L for water proofing treatment for roof slabs including crumple joints by applying bitumen primer @ 0.3 ltr/sqm then applying bot blown 85/25 @ 1.20kg/sqm and laying APP modified bituminous 3mm thick with non oven polyester core water proofing membrane laid and bonded to the sub-strata by heat process, over lap shall be sealed by flame torch application not less than 3.2kg/sqm with over lap of 100mm and end lap of 150 mm and APP membrane shall be covered with bituminous based aluminium paint @0.2kg/sqm on top complete all as specified and directed.
M&L for Machine cut kota stone slab flooring mirror finished 18-20 mm thick (each slab not less than 0.25 Sqm) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab with 20 mm thick screed bed or bedding layer in cement mortar 1:4, including rubbing and polishing , complete all as specified and directed.
M&L for Machine cut kota stone in riser of steps, skirting, dado and pillar mirror finished 20-25 mm thick over cement base rendering laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab with 15 mm thick screed bed or bedding layer in cement mortar 1:4, including rubbing and polishing , complete all as specified and directed.
M&L Plain Cement concrete type C-2, 1:3:6 using 40 mm graded crushed stone aggreates 100 mm thick as in flooring finished even and fair
M&L for 50 mm thick Sand cushioning below interlocking paver tile, complete all as specified and directed.
M&L Machine pressed precast concrete interlocking paver block any shape and size fixing with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, complete all as specified and directed.
M & L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in flooring benching to drain, coping, bed block etc and the like edge slightly rounded or chamfered including necessary use and waste of form work complete all as specified and as directed.
M&L for salt glazed stoneware (SGSW) drain pipes laid in trenches of 150 mm internal diameter of pipe and jointed in CM 1:1 complete all as specified and directed.
M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 150 mm bore of pipe with cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate complete all as specified and directed.
M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished ,and reforming benching as required for 150 mm internal dia of pipe complete all as specified and directed.
M&L for Precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:4 complete all as specified and directed.
M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in lintels upto 1.5 m clear span, coping, benching, bed block, lintel band, plinth courses etc and similar work including weathering,slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.
M&L for rendering on fair faces of brick work or concrete surface of wall 15mm thick in CM 1:4 and to be finished even and smooth with out using extra cement complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) rubbish off the premises complete all as specified and directed.
M&L Vitrified Ceramic tiles 8-10 mm thick (square/ rectagular) dark/colour shade polished,area of each tiles not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floors over 20mm thick screed bed in CM 1:4 complete all as specified and directed.
All as per item No 84 above but on vertical surface of wall of size 600x600x10mm thick as in dado/skitting including 10 mm thick rendering in CM 1:3 complete all as specified and directed
M&L for glazed ceramic coloured tiles 350 x 250 x 6-7 mm / 450 x 350 x 7 mm thick on vertical surface such as dado / skirting / risers to steps etc jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including rendering 10 mm thick in cement mortor 1:3 complete all as specified and directed. Note - The size of tiles (except thickness) may be varied during execution without any price adjustment.
Demolition of brick work built in cement mortar including all quoins, pillars, arches etc complete all as specified and directed.
M&L 16-18 mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
M&L for preparaing new plastered surface and applying two coats of oil bound distemper over one coat of primer with 3 mm thick wall care putty to wall complete all as specified and directed.
M&L complete removal of existing treatment on walls and applying two coats of oil bound distemper over one caot of primer with 3 mm thick wall care putty to ceiling complete all as specified and directed.
M&L complete removal of existing treatment on walls and applying two coats of oil bound distemper over one coat primer with 3 mm thick wall care putty to walls complete all as specified and directed.
M&L 18/19 mm thickness Block boards, grade 2 quality, i n t e r i o r grade, commercial type, fixed with screws to timber frame-work as in cup board shutters etc complete all as specified and directed.
M&L 0.9 mm thickness Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and as directed .
S&F 40mm dia cub board knob brass polished fixed with nut screw and washer of mile steel bright finished complete all as specified and directed.
S&F ball catches with 8mm dia steel ball and brass body and striking palte incl latting in and fixed complete all as specified and directed.
S&F in repair 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.
S & F in repairs stainless steel waste coupling for S.S Sink 75mm to 100mm dia set with rubber washer plug etc complete all as specified and directed.
S&F in repair sink with draining board made out of stainless steel 1.00 mm thick sheet for kitchen with plugs, washers and wastes including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm with bowl size 410 mm x 330mm x 160mm complete all as specified and directed.
S&F in repair 1 mm thick stainless steel plate rack of size 900x600x200mm including fixing with rawal plug ang screws complete all as specified and directed Make Blue Star cat No kpr - 313/ kpr- 314 or equivalent of nirali/ parryware complete all as specified and directed.
S & F in repairs grating doom 125mm dia with waste hole of PTMT fixed on floor/nahani trap with cement mortar, fixed in repairs complete. (Minimum weight 40 gms) complete all as specified and directed.
S & F in repairs PVC waste pipe 32mm dia, 60 cm long for WHB with cup complete all as specified and directed.
S&F in repair ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore (minimum weight 210 gms) complete all as specified and directed.
S&F in repairs gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 20 mm dia complete all as specified and directed.
Supply and laying CPVC pipes SDR 11 & Plain CPVC 11 fitting on walls/ceiling or laying in floor complete all as specified of 16 mm outer dia.
All as per item No 104 above but 20 mm outer dia
S&F CPVC Brass Elbow 16 mm outer dia
All as per item No 106 above but 20 mm outer dia
S&F CPVC Brass Elbow (3/4 x1/2) 20 mm outer dia
S&F CPVC Brass Tee 16 mm outer dia
All as pet item No 109 above but 20 mm outer dia
S&F CPVC Male Brass Threaded Adaptor (MTA/MBTA) 16 mm outer dia
All as per item No 111 above but 20 mm outer dia
S&F CPVC Female Brass Threaded Adaptor (FTA/FBTA) 16 mm outer dia
All as per item No 113 above but 20 mm outer dia
S&F CPVC Tank adaptor 20 mm outer dia
S&F CPVC Union 16 mm outer dia
All as per item No 116 above but 20 mm outer dia
M&L for point wiring with 1.5 Sqmm signle core PVC insulated unsheathed copper FRLSH multi stranded copper conductor cable in and including concealed PVC conduit of size 19 MM ISI marked inclusive of tees, bend, elbows etc upto and including GI sunk boxes of size 1.2 mm thick and 60mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switch/ socket of suitable size complete including PVC insulated multi stranded copper conductor 1.5 Sqmm FRLSH cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal incuding cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for One light point controlled by one , one way switch 5 Amp
All as per item No 122 above but One fan exhaust fan point controflled by one, one way switch 5 Amps and regulator
All as per item No 122 above but One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board
All as per item No 122 above but using 2.5 Sqmm single core copper conductor cable of multistranded flame retardent PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket combition point including necessary running of 2.5 Sqmm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly.
M&L for switch piano (Flush type) 5 amps, 240 Volts, single pole one way complete all as specified and directed
M&L for socket outlet 5 pin 5 Amp 240 volts complete all as specified and directed
M&L for switch piano (flush type) 15 Amps , 240 volts, 50 Hz one way complete all as specified and directed
M&L for Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type complete all as specified and directed
Supply and fix Ceiling rose 3 termianl complete all as specified and directed .
M&L for Sheet metal enclosure factory made double door for mounting MCBs with 200A rated bus bar capacity TPN 8 way AC 240 Volts with IP-43 protection, complete all as specified and directed.
M&L for Sheet metal enclosure factory made double door for mounting MCBs with 200A rated bus bar capacity SPN 8 way AC 240 Volts with IP-43 protection, complete all as specified and directed.
Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) of 63 Amps, TPN and current carrying capacity in the DB complete with connection testing and commissioning.
Supply and fixing 240V, 10KA 'C' curve miniature circuit breaker (MCB) of 32 Amp, SPN and current carrying capacity in the MCB DB complete with connection testing and commissioning.
Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete
Supply and fixing of new generation energy saving and environmental friendly long life LED bldg security lights with capacity 25 watts made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having botom opening separate driver compartment with IP66 protection and impact resistance of IK08 , complete all as specified and directed
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1400 mm sweep. Min air delivery 245 CFM with service value 6.00 BEE. Five star rated , complete all as specified and directed
M&L Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, burried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less'than 1.5 meters below normal ground level, connected to galvanised iron earth lead wire of 4 mm dia GI pipe mediam grade 15 mm dia upto 7.5 mtr including provn of conrete pit in PCC (1:2:4) type B-1 using 20 mm graded stone aggregates with 40 mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 kg/sqm) and frame of angle iron 25x25x3 mm with lugs 02 Nos and with 6.0 mm dia MS bar handle made to shape, GI light grade 20 mm bore pipe for earth plate, common sald and charcoal filing, test point made out of Bronze/ Gun metal with fixing arrangement, funnel, wire mess and excavation/ earthwork in hard/ dense soil, to a distance not exceeding 50 mtr all as per electrical plate No 3 of SSR 2010 Part I and connecting to earth test point all as specified or indicated incl testing on completion , complete all as specified and directed
M&L for street light fitting bracket made out of 25 mm bore GI pipe, light grade, tubing bend to shape, 1.2 metre long, fixed to pole/wall, painting with two coats of aluminium paint over a coat of red oxide primercomplete, complete all as specified and directed.
Supply and fix energy saving environment friendly and robust IP65 protected LED midbay with PDC housing suitable for ceiling(Surface/ suspended) mount with capacity 50 watts, 240 volts, 50 Hz complete all as specified and directed.
M&L replacement of 2 Runs of cable PVC insulated but unsheathed 6.0 Sq mm, FRLS, stranded copper conductor in and including PVC conduit with continuous earthing cable PVC insulated 6.0 Sq mm,FRLS, stranded copper conductor complete all as specified and directed. (Cable make Anchor/Havells/Finolex) Note :-2 runs of cable, one run of earth wire (copper cable) & one run of PVC conduit shall be measured as one running metre.
M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sq. mm 3.5 Core complete all as specified and directed
Supply and providing sand cushioning with dry clean sand 15 cm below cable and 8 cm above the cable complete all as specified and directed. Note : Punned thickness shall be measured for the purpose of payments.
Supply and laying flyash building bricks laid in trenches for LT cable complete all as specified and directed.
M&L for Tubes, 'light grade', galvanised, with all fitting; laid in trenches, walls of bore 32 mm for laying of cable complete all as specified and directed
Boring of holes horizontally for laying of 80mm dia pipe (minimum depth 0.60 Mtr from top level) under road, Pavement, hard standing complete all as specified and directed.
Supply and laying for 3- layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches of size 25 mm complete all as specified and directed.
Supply and fixing PP-R Gate valves (brass insert) of size 25 mm dia complete as per requirement of the site complete all as specified and directed.
Making connection of PP-R distribution branch with PP-R main of following sizes by providing and fixing tee including cutting and making fusion joint etc complete all as specified and directed.
Supply and install hi wall split unit indoor /outdoor complete with cordless remote control unit and with in built air ioniser and plasma filter for better in door air quailty with minium 3 star and EER 3.2 of capacity 1.5 ton including connecting and testing complete all as specified and directed.
Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type and designed for input variation between 130 volt output voltage stabilized at 230 Volt with accuracy at +- 2.5% at 230 volts and of cap 4 KVA for 1.5 ton AC connecting and testing complete all as specified and directed.
S&F for sub main wiring two single core PVC insulated and unsheathed cable with 4 Sqmm multi-strand copper conductor including in PVC casing caping with 4 Sqmm PVC copper conductor cable as in earth wire system ,including taking out old wiring complete all as specified and directed. (Three runs of wire and one run of casing capping will be measured as single run).
Supply and fix single pole and neutral enclosure with a two pin and earth plug and socket of capacity complete with one single pole MCB of capacity 240 volts 20 amp complete all as specified and directed.
Taking down carefully copper/aluminum point wiring (light, fan/exhaust fan, socket or power) complete with fittings and fixtures such as switches, ceiling roses, pendants, regulators, socket, lamp holders, brackets, bulk head fittings etc removing material to store for keeping in safe custody or for taking credit ( credit for above items should be made as per conditions separately ) and also making good disturbed surfaces of wall, floors etc complete all as specified and directed.
All as per item No 118above but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor ( Multi-stranded) PVC insulated and unsheating electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 2.5 Sqmm copper stranded conductor as continuous earth wire connected to common earth dolly complete all as specified and directed.
Energy efficient LED integrated batten suitable for indoor applications tube light fitting 1x20 Watt 4 FT complete, Trim LED NEO all as per Surya Cat Part No SLE BT 20 IL equivalent in Philips/Wipro.
Supply and fixing exhaust fan 300 mm sweep, 1400 RPM with louver complete all as specified and directed.
M/S. KISHAN ENGINEERING
M/S S.K GHOSE
R K Traders
M/S JAGANNATH SASMAL
V.Venkata Ramaiah
DHABALESWAR ENGINEERING WORKS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .