Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹48.5 LAccepted-AOC | L1 | Accepted-AOC DUE TO L1 BIDDER | |
| 2 | L2₹51.2 L+₹80,980 (1.61%)Rejected-Finance | L2 | Rejected-Finance REJECTED DUE TO L2 BIDDER | |
| 3 | L3₹51.8 L+₹1.5 L (2.95%)Rejected-Finance | L3 | Rejected-Finance REJECTED DUE TO L3 BIDDER | |
| 4 | L4₹52.5 L+₹2.1 L (4.25%)Rejected-Finance | L4 | Rejected-Finance REJECTED DUE TO L4 BIDDER | |
| 5 | L5₹53.7 L+₹3.4 L (6.71%)Rejected-Finance | L5 | Rejected-Finance REJECTED DUE TO L5 BIDDER |
| Sl No | Description | Qty | Unit | M/S R P M CONSTRUCTION L6 | M/S R.N ENTERPRISE L1 | M/S ASHOK CONSTRUCTION L7 | M/S DK TRADERS L2 | M/S SUNRISE CONSTRUCTION AND CO L5 | M/S SM ANSARI L4 | polar agencies L3 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | M&L in replacement of light/fan point wiring with 1.5 sqmm (nominal area), PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including PVC casing capping of adequate size with all fittings and accessories including PVC boxes for housing the switches (Make of box prestoplast, prestoteak), including PVC insulated and unsheathed (FRLSH) single core multi-stranded copper conductor cable of size 1.5 sqmm green in colour as earth continuity conductor connected to common earth dolly upto ceiling rose/light point complete all as specified and directed. | 525 | Per Point | 1,200 ₹6,30,000 | 1,140 ₹5,98,500 Lowest | 1,240 ₹6,51,000 | 1,155 ₹6,06,375 | 1,180 ₹6,19,500 | 1,168 ₹6,13,200 | 1,170 ₹6,14,250 |
| 2.00 | One bell/buzzer point controlled by one bell push complete all as specified and as directed. | 15 | Per Point | 1,450 ₹21,750 | 1,250 ₹18,750 Lowest | 1,500 ₹22,500 | 1,250 ₹18,750 Lowest | 1,400 ₹21,000 | 1,300 ₹19,500 | 1,265 ₹18,975 |
| 3.00 | All as per item No. 1.00 here-in-before, but for One 3 pin socket outlet, 6 Amps on the same board with other switches, with cables 1.5 sqmm size complete. | 60 | Per Point | 350 ₹21,000 | 280 ₹16,800 Lowest | 360 ₹21,600 | 292 ₹17,520 | 330 ₹19,800 | 315 ₹18,900 | 300 ₹18,000 |
| 4.00 | All as per item No. 1.00 here-in-before, but for one 3 pin socket outlet 6 Amps three pin controlled by one switch on independent board complete all as specified and directed. | 160 | Per point | 1,240 ₹1,98,400 | 1,150 ₹1,84,000 Lowest | 1,260 ₹2,01,600 | 1,150 ₹1,84,000 Lowest | 1,200 ₹1,92,000 | 1,180 ₹1,88,800 | 1,165 ₹1,86,400 |
| 5.00 | All as per item No. 1.00 here-in-before, but for one 5 pin socket outlet 16 Amp and 6 Amp multipurpose independent using 2.5 Sqmm copper conductor cable (multi-strand) PVC insulated and unsheathed cable and 2.5 sqmm copper (multistrand) PVC insulated and unsheathed earth wire with PVC boxes complete all as specified and directed. | 150 | Per point | 1,420 ₹2,13,000 | 1,350 ₹2,02,500 Lowest | 1,460 ₹2,19,000 | 1,380 ₹2,07,000 | 1,400 ₹2,10,000 | 1,445 ₹2,16,750 | 1,400 ₹2,10,000 |
| 6.00 | M&L for point wiring for one socket outlet 16 Amp on independent board with 4 sqmm (nominal area), PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including PVC casing capping of adequate size with all fittings and accessories including PVC boxes for housing the switches (Make of box Prestoplast, Prestoteak), including PVC insulated and unsheathed (FRLSH) single core multi-stranded copper conductor cable of size 4 sqmm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed. | 20 | Per Point | 2,300 ₹46,000 | 2,270 ₹45,400 Lowest | 2,360 ₹47,200 | 2,300 ₹46,000 | 2,300 ₹46,000 | 2,400 ₹48,000 | 2,390 ₹47,800 |
| 7.00 | S&F socket outlet 2 in 1, 5 pin, 5 amp flush type complete all as specified and directed. | 220 | Each | 182 ₹40,040 | 180 ₹39,600 Lowest | 190 ₹41,800 | 190 ₹41,800 | 180 ₹39,600 Lowest | 200 ₹44,000 | 200 ₹44,000 |
| 8.00 | S&F socket outlet 2 in 1, 5 pin, 5 and 15 amp flush type complete all as specified and directed. | 245 | Each | 310 ₹75,950 | 280 ₹68,600 | 325 ₹79,625 | 178 ₹43,610 Lowest | 300 ₹73,500 | 285 ₹69,825 | 285 ₹69,825 |
| 9.00 | S&F switch piano flush type (ISI marked), single pole, one way 15 Amp, 240 Volts complete all as specified and directed. | 245 | Each | 240 ₹58,800 | 240 ₹58,800 | 250 ₹61,250 | 238 ₹58,310 Lowest | 255 ₹62,475 | 240 ₹58,800 | 240 ₹58,800 |
| 10.00 | S&F in replacement of ceiling rose, surface bakelite, 65mm x 50mm, two to three terminals complete all as specified and directed. | 530 | Each | 90 ₹47,700 | 75 ₹39,750 Lowest | 100 ₹53,000 | 80 ₹42,400 | 100 ₹53,000 | 85 ₹45,050 | 84 ₹44,520 |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
25 Nov 2025, 9:00 amClosed
GE TENGA
GE TENGA PIN-790116 C/O 99 APO
REPAIR/REPLACEMENT OF INTERNAL WIRING, FITTING, GEYSERS, VENTILATION SYSTEM, SUB-MAIN WIRING, LED FITTING, I/C SOLAR WATER HEATING PHASE-I MD AREA (RUPA, GACHHAM, BIRPUR, DP, BOMDILA) WITH ALLIED E/M WORKS OF AGE E/M UNDER GE TENGA
2025_MES_738384_1
8061/E8
Open Tender
Civil Works
Item Rate
270 days
GE TENGA
PLA REF NIT
7 documents required · 7 mandatory
₹500
GE TENGA
₹96,000
Yes
22 Dec 2025
4 Nov 2025
26 Nov 2025
4 Nov 2025
25 Nov 2025
18 Nov 2025
Amount
M&L in replacement of light/fan point wiring with 1.5 sqmm (nominal area), PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including PVC casing capping of adequate size with all fittings and accessories including PVC boxes for housing the switches (Make of box prestoplast, prestoteak), including PVC insulated and unsheathed (FRLSH) single core multi-stranded copper conductor cable of size 1.5 sqmm green in colour as earth continuity conductor connected to common earth dolly upto ceiling rose/light point complete all as specified and directed.
One bell/buzzer point controlled by one bell push complete all as specified and as directed.
All as per item No. 1.00 here-in-before, but for One 3 pin socket outlet, 6 Amps on the same board with other switches, with cables 1.5 sqmm size complete.
All as per item No. 1.00 here-in-before, but for one 3 pin socket outlet 6 Amps three pin controlled by one switch on independent board complete all as specified and directed.
All as per item No. 1.00 here-in-before, but for one 5 pin socket outlet 16 Amp and 6 Amp multipurpose independent using 2.5 Sqmm copper conductor cable (multi-strand) PVC insulated and unsheathed cable and 2.5 sqmm copper (multistrand) PVC insulated and unsheathed earth wire with PVC boxes complete all as specified and directed.
M&L for point wiring for one socket outlet 16 Amp on independent board with 4 sqmm (nominal area), PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including PVC casing capping of adequate size with all fittings and accessories including PVC boxes for housing the switches (Make of box Prestoplast, Prestoteak), including PVC insulated and unsheathed (FRLSH) single core multi-stranded copper conductor cable of size 4 sqmm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed.
S&F socket outlet 2 in 1, 5 pin, 5 amp flush type complete all as specified and directed.
S&F socket outlet 2 in 1, 5 pin, 5 and 15 amp flush type complete all as specified and directed.
S&F switch piano flush type (ISI marked), single pole, one way 15 Amp, 240 Volts complete all as specified and directed.
S&F in replacement of ceiling rose, surface bakelite, 65mm x 50mm, two to three terminals complete all as specified and directed.
S&F switch piano flush type (ISI marked), single pole, one way 5 Amp, 240 Volts complete all as specified and directed.
S&F bell/buzzer push 5/6 Amp, flush type complete all as specified and directed.
S&F call bell ding dong electric AC, 240 volt, 50 HZ, surface type complete all as specified and directed.
S&F lamp holder, insulated body with pack plate suitable batten fitting on wall duly grouted/fixed in solid block wall or on wooden board complete all as specified and directed.
S&F modular switch 1 way 6A, 1 module, 240 Volts complete all as specified and directed.
S&F modular switch 1 way 16A, 1 module, 240 Volts complete all as specified and directed.
S&F modular socket, 6A - 5 pin combined 2 module, 240 Volts complete all as specified and directed.
S&F modular socket 6A/16A - 5 pin combined 2 module, 240 Volts complete all as specified and directed.
S&F modular white cover plate with frame 02 module complete all as specified and directed.
S&F modular white cover plate with frame 03 module complete all as specified and directed.
S&F modular white cover plate with frame 04 module complete all as specified and directed.
S&F modular white cover plate with frame 06 module complete all as specified and directed.
S&F modular metal flush box 1/2 module complete all as specified and directed.
S&F modular metal flush box 3 module complete all as specified and directed.
S&F modular metal flush box 4 module complete all as specified and directed.
S&F modular metal flush box 6 module complete all as specified and directed.
S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt, 220 V, AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
S&F LED light fitting mirror type with high out put diffuser 4 feet, 20 watt, 220 V, AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
S&F in replacement of LED tube mirror type with high out put diffuser 4 feet, 20 watt, 220 V, AC decorative one side connection type with driver holder complete all as specified and directed.
S&F LED batten, 220V, AC decorative box type with holder suitable for fixing LED tube light 18/20 Watt connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
S&F in replacement of LED luminaire 600 mm x 600 mm, 35/36 watt, (Warm White) 220 V, AC with high efficiency PMMA diffuser soft glare free light of colour white/warm white as per requirement at site complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.
S&F in replacement of LED luminaire 600 mm x 600 mm, 35/36 watt, (Cool Day Light) 220 V, AC with high efficiency PMMA diffuser soft glare free light of colour white/warm white as per requirement at site complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.
S&F in replacement of down lighter round 18 W (White/Warm White) type & driver incl integrated electronic driver including taking down old unsv one complete all as specified and directed.
S&F in replacement of new generation energy saving and environmental friendly long life LED building security light made up of innovative die cast aluminium housing high power LED as lighting source with IP - 66 power consumption 35 watt complete input voltage of 150-240 Volt (nominal rated voltage 240 Volt) complete including twisted 3 core copper cable of size 1.5 Sqmm dia for connecting phase, neutral and earth from ceiling rose to light length as required at site, GI bracket 25 mm dia pipe and 02 numbers clamps, all fixing arrangements such as fasteners, bolts, nuts washers etc complete all as specified and directed.
S&F in replacement of LED bulkhead fitting 10 watt (Endura Ruby) with all accessories and including connecting up with twin core twisted with flexible copper conductor cable with suitable size of 230 volts, 50 Hz complete all as specified and directed.
S&F decorative post top for indirect light with IP 65 protection. Resistant to impact and corrosion. Glare-free and better uniformity of capacity 35 watt with all accessories and including connecting up with twin core twisted with flexible copper conductor cable with suitable size of 230 volts, 50 Hz complete all as specified and directed.
S&F decorative garden light pressure die cast powder coated housing with PC diffuser, efficient high output LED with IP-65 protection of capacity 10 watt (CDL/WW) with all accessories and including connecting up with twin core twisted with flexible copper conductor cable with suitable size of 230 volts, 50 Hz complete all as specified and directed.
S&F wire for circuit/sub main wiring with 1100 volts grade double core PVC insulated and unsheathed cable with multistranded copper conductor 4 Sqmm, on surface or recessed or drawn in PVC casing capping/PVC pipe along with 4 sqmm single core copper conductor multi stranded cable as earth continuity conductor complete all as specified and as directed. Note: One RM PVC casing capping/PVC conduit, one run of 4 sqmm earth wire and 2 run of 4 sqmm cable shall be measured as one run.
S&F wire for circuit/sub main wiring with 1100 volts grade double core PVC insulated and unsheathed cable with multistranded copper conductor 6 Sqmm, on surface or recessed or drawn in PVC casing capping/PVC pipe along with 6 sqmm single core copper conductor multi stranded cable as earth continuity conductor complete all as specified and directed. Note: One RM PVC casing capping/PVC conduit, one run of 6 sqmm earth wire and 2 run of 6 sqmm cable shall be measured as one run.
M&L for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron. Earth wire protected by GI pipe 15 mm bore (medium grade) and connected to main switch board or main control board as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC, (1:3:6), type C1, pre-cast RCC, (1:2:4), type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm C/C with one handle for lifting made out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing complete all as directed by Engineer-in-Charge.
S&F sheet metal enclosures for DBs when MCBs to be used 230 volts, 8 way, 200 Amp rated busbar, single pole and neutral fixed to wall on PVC board complete all as specified and directed.
S&F sheet metal enclosures for DBs when MCBs to be used 230 volts, 4 way, 200 Amp rated busbar, single pole and neutral fixed to wall on PVC board complete all as specified and directed.
S&F sheet metal enclosures for DBs when MCBs to be used 230 volts, 4 way, 200 Amp rated busbar triple pole and neutral fixed to wall on PVC board complete all as specified and directed.
S&F MCB TPN having braking capacity 10KA, 63 Amps, 240 V complete all as specified and directed.
S&F MCB SPN having braking capacity 10KA, 32 Amps, 240 V complete all as specified and directed.
S&F MCB SP having braking capacity 10KA, 6 to 32 Amps, 240 V complete all as specified and directed.
S&F in replacement of MCCB, 04 pole, capacity 63/100 Amps with ultimate breaking capacity 16 KA at 415 volts with fixed thermal settings conforming to IEC 60947 Part-I/IS-13947 Part-I, (Ics=Icu=100%) in the existing panel with suitable connecting copper terminals at site complete all as specified and directed.
S&F in replacement of MCCB, 04 pole, capacity 125 Amps with ultimate breaking capacity 16 KA at 415 volts with fixed thermal settings conforming to IEC 60947 Part-I/IS-13947 Part-I, (Ics=Icu=100% in the existing panel with suitable connecting copper terminals at site complete all as specified and directed.
S&F in replacement of distribution board vertical type TPN 415 Volt for fixing 4 pole MCCB, double door IP 43 protection, 4 way with copper bus bars, neutral links, earth link, earthing studs, blanking plates, interconnection between incomer MCCB and bus bar duly prewired fixed flush to wall/other surface complete all as specified and directed.
S&F in replacement of enclosure A frame for fixing 4 pole MCCB, single door IP 43 protection, 4 way fixed flush to wall/ other surface complete all as specified and directed.
S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 A complete all as specified and directed.
Taking down of defective geyser of any capacity from different locations for repair including removing of electric connection, pipe fitting without any damage and refixing the same after repair in same/desired location complete all as specified and directed. Note:- The parts required for repair shall be measured separately under relevant item.
S&F copper/ SS body inner shell suitable for water storage heater (geyser) of 50 ltr capacity as per sample including taking down old unsv steel/copper tank complete all as specified and directed.
S&F outer body of water storage heater (geyser) of 50 ltr capacity as per sample including taking down old unsv outer body complete all as specified and directed.
S&F copper/SS body inner shell suitable for water storage heater (geyser) of 25 ltr capacity as per sample including taking down old unsv steel/copper tank complete all as specified and directed.
S&F outer body of water storage heater (geyser) of 25 ltr capacity as per sample including taking down old unsv outer body complete all as specified and directed.
M&L for glass wool packing required for cover the 25/50 ltrs copper inner shell to avoid the heat conduction including taking out old packing complete all as specified and directed.
S&F heating coil 1500 Watt in existing storage water heater (Geyser) suitable for 25 Ltrs capacity complete all as specified and directed.
S&F heating coil 2000 Watt in existing storage water heater (Geyser) suitable for 25/50 Ltrs capacity complete all as specified and directed.
S&F thermostat range of 30-80 degree, as per site requirement, size as per sample complete all as specified and directed.
S&F non return valve brass suitable of 15 mm dia including taking down complete all as specified and directed.
S&F indicator lamp red/green colour suitable for storage water heater any capacity complete all as specified and directed.
S&F steel pipe connection 45 cm long both end brass suitable for hot water supply and screw down 15 mm GI pipe complete complete all as specified and directed.
S&F steel pipe connection 60 cm long both end brass suitable for hot water supply and screw down 15 mm GI pipe complete all as specified and directed.
M&L for replacement of 12 x 100 MM bolts grouting in bricks masonary wall with 1:4 CM for mounting geyser complete all as specified and directed.
S&F geyser base plate front & rear suitable for existing geyser of capacity 25/50 ltrs complete all as specified and directed.
Taking down of defective exhaust fan any capacity/make/model/size from its original locations for repair including sealing of cable end, dismantling blades, clamps with bush, louvers & motors, refixing the same after repair & assembling complete set in same location etc including testing complete all as specified and directed.
S&F in repair/replacement of exhaust fan motor suitable for exhaust fan 200 mm sweep plastic body complete all as specified and directed.
S&F in repair/replacement of fan blade suitable for exhaust fan 200 mm sweep plastic body complete all as specified and directed.
S&F in repair/replacement of old unserviceable of frame made with engineering plastic complete suitable for 200 mm exhaust fan plastic body white colour complete all as specified and directed.
Supply only louvers suitable for exhaust fans 225/230 mm sweep complete.
Supply only louvers suitable for exhaust fans 300mm sweep complete.
Supply only louvers suitable for exhaust fans 450mm sweep complete.
S&F in repair/replacement of exhaust fan motor metal body suitable for exhaust fans 300 mm sweep complete all as specified and directed.
S&F in replacement of old unserviceable of frame with three/four legs suitable for 300 mm exhaust fan metal body of smoke grey colour complete all as specified and directed.
S&F in replacement of old unserviceable of fan blade with split pin suitable for 300 mm exhaust fan of smoke grey colour complete all as specified and directed.
S&F in repair/replacement of exhaust fan motor metal body suitable for exhaust fans 450 mm sweep complete all as specified and directed.
S&F in replacement of old unserviceable of frame with three/four legs suitable for 450 mm exhaust fan metal body of smoke grey colour complete all as specified and directed.
S&F in replacement of old unserviceable of fan blade with split pin suitable for 450 mm exhaust fan of smoke grey colour complete all as specified and directed.
S&F in repair/replacement of exhaust fan motor metal body suitable for exhaust fans 225/230 mm sweep complete all as specified and directed.
S&F in replacement of old unserviceable frame with three legs suitable for 225/230 mm exhaust fan metal body of smoke grey colour complete all as specified and directed.
S&F in replacement of old unserviceable fan blade with split pin suitable for 225/230 mm exhaust fan metal body of smoke grey colour complete all as specified and directed.
Supplying, laying, jointing & testing cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminum conductor, 1100 volts grade, of size 25 sqmm 4 core as per IS 7098 Pt-II laid in trenches/ ducts/ encased in GI pipe/ fixed to pole complete all as specified and directed.
All as per item No 83.00 here-in-above, but of size 16 sqmm 4 core complete.
All as per item No 83.00 here-in-before, but of size 10 sqmm 4 core complete.
All as per item No 83.00 here-in-before, but of size 10 sqmm 2 core complete.
Taking down point wiring carefully copper/ aluminum (light, fan, socket or power) complete (fittings such as switches ceiling rose, pendents, regulators, sockets etc) complete all as specified and directed.
Taking down main switches, DBs alongwith existing board and removing the same from the site and making good the disturb surfaces/ portion of the wall etc all specified and directed by Engineer-in-Charge.
Excavation in trenches in any type of soil n.exc 1.5 m wide and n.exc 1.5 m in depth for laying of pipe/cables/poles etc and getting out hard & dense soil complete all as specified and directed.
Returning fitting in any type of soil including spreading, levelling, watering and well ramming in layers n.exc 25 cm complete all as specified and directed.
Removing excavated soils to a distance n.exc. 50 mtr and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed.
M&L for laying of fine, clean sand (river sand) free from sharp materials and stone particles in trenches for cushioning of cable 8 cm thick under cable and 15 cm thick over the cable including gently punning complete all as specified and directed. Note:- The total thickness of sand shall be measured 18 cm after punning.
Supply and laying un-reinforced precast concrete cable protection cover of class LV, type-1, flat size 250mm x 150mm x 40 mm, local made super quality complete all as specified and directed.
Supply and laying galvanised iron tube light grade ISI marked of size 40 mm dia incl all fittings in trenches/fixed on pole/wall/floor or laid in position including repairing of demolished cemented portion complete all as specified and directed.
Taking down old unsv energy meter any type and depositing it to MES store yard complete all as specified and directed by Engineer-in-Charge.
S&F energy meter electronic digital type, AC, three phase static energy meter of accuracy class 1.0, 3 X 240V, 50Hz, with Backlit LCD display of rating 10-60A (Measures & displays kWh Only) with transparent hinge type box complete all as specified and directed. Make: HPL Electric & Power/L&T/ABB/Legrand/BHEL.
S&F energy meter electronic digital type, AC, single phase static energy meter of accuracy class 1.0, rating 5-30A, 240V, 50Hz only kWh compact meter with pilfer proof meter box with sealing screw provision (LCD Mini) complete all as specified and directed. Make: HPL Electric & Power/L&T/ABB/Legrand/BHEL.
M/S DK TRADERS (BID ID -3480940)
polar agencies (BID ID -3481096)
M/S SM ANSARI (BID ID -3481218)
M/S SUNRISE CONSTRUCTION AND CO (BID ID -3481903)
M/S R P M CONSTRUCTION (BID ID -3481921)
M/S ASHOK CONSTRUCTION (BID ID -3481952)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.33 MB
BOQ_826781.xls
BOQ • 1.48 MB
Tender.pdf
Tender Documents • 1.19 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .