ADDN/ALTN OF SERVANT QTR STAIR CASE AT CERTAIN BLOCKS IN GH AND PROVISION OF VEHICLE PARKING SHED AND ALLIED SERVICES FOR WATERMANSHIP TRG CENTRE (WTC) AT DSSC WELLINGTON

M&L for chequered cement concrete tiles 30 cmx 30 cmx 25 mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments of required colour laid over and including 20mm thick screed bed in cement mortar (1:4) all as specified and as directed.

Material and labour for 75 mm thick plain cement concrete 1:4:8 type D2, using 40mm graded stone aggregate as in foundation, filling and mass concrete all as specified and as directed.

M&L hardcore of gauge n.exc 63 mm deposited, spread & levelled in layers n. exc 15 cm thick, watered & rammed to a true surface with broken stone or boulders complete as specified and as directed.

Demolition of cement concrete (unreinforced ) of any description and in any position not otherwise specifically provided etc. exc 15cm thickness and removing debris from site complete all as specified and as directed.

Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided complete all as specified and as directed

S and F for MS work for curved Hand rails for staircase, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed

M&L for 20 mm thick rendering in cement mortar 1:4 on stone masonry surfaces of wall, finished even and smooth without using extra cement and mixed with Water Proofing compound complete all as specified and as directed. Note: WPC shall be measured and paid seperately.

M&L for 5 mm thick rendering in cement mortar 1:3 on soffit or ceiling finished even and smooth without using extra cement complete all as specified and as directed.

Supply only water proofing compound complete all as specified and as directed.

Taking down cement or cement lime plaster of any description on brick or stone walls concrete surface etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed.

M&L for preparing newly plastered surfaces on external walls and applying one coat of exterior wall primer and two coats of Exterior Emulsion anti-algal weather proof paint complete all as per manufacturer instruction and all as specified and directed.

S & F Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. quality conforming to Fe 410-W(gde-E-250 ) quality-A all as specified and as directed.

S&F pre-painted galvalume aluminum Zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength 550 Mpa as in roof covering /cladding to wall,fixed with self tapping screws all as specified and as directed.

Demolition of Random Rubble Masonry wall of any description and in any position not otherwise specifically provided etc complete all as specified and as directed.

Material and labour for plain cement concrete 1:2:4 type B2, using 40mm graded stone aggregate as in foundation, filling and mass concrete all as specified and as directed.

M&L plain cement concrete type B-0 1:2:4 (12 mm graded agg) 25 mm thick as in floor complete all as specified and as directed.

S/F (SWR) PVC Pipe 110 mm pipes double socketed in any length with rubber ring joints fixed to wall/ceiling complete all as specified and as directed

S/F(SWR) PVC pipe 75 mm single socketed in any length with ring joints to walls/ceiling complete all as specified and as directed

S/F PVC (SWR) bends 110 mm bore with access door complete all as specified and as directed

S/FPVC (SWR) double Y 110 mm bore with access door complete all as specified and as directed

S/F PVC (SWR) bends 75 mm bore with access door complete all as specified and as directed

S/F PVC(SWR) Vent cowl 110 mm complete all as specified and as directed

S/F PVC(SWR) Vent cowl 75 mm complete all as specified and as directed

M&L for preparing new steel surfaces and applying two coat of synthetic enamel paint over a coat of red oxide primer on steel surfaces of any description over 10 cm width or girth incluidng necessary preparation of surface all as specified and directed.

Surface dressing n exc. 30 cm deep and averaging 15 cm deep and getting out getting out hard dense soil complete all as specified and as directed.

Excavating in post holes (or similar holes) each n.exc 0.5 cum getting out hard/dense soil returning, filling and well ramming earth or broken rubble, mixed with earth around, in layers not exc 25 cm all as specified and as directed.

M&L for PCC 1:3:6 type C2 using 40 mm graded stone agg as in post holes etc complete all as specified and as directed.

Material & labour for machine pressed precast 60mm thick with grey cement and pigment interlocking paver block (M-35) conforming to IS 15658-2006 in flooring including 40mm thick sand cushioining complete all as specified and as directed.

M&L for PCC 1:4:8 type D2 using 40 mm graded stone agg in sub base 75mm thick complete all as specified and as directed.

S&F MS screw bolts (machine made) with hexagonal or square heads at one ends and screwed the other, or screwed both ends, each screwed end to be fitting with washer and one hexagonal or square nut n.exc. 5cm long and dia of shank 5 to 10 mm etc. all as specified and as directed.

M&L for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws all as specified and as directed.

Please Enable Macros to View BoQ information