CERTAIN MISC B/R AND E/M REPAIR/MAINTENANCE WORK OF MES INSTALLATION AT RV/DMSRDE AREA UNDER GE (I) R and D KANPUR.

Amount

Demilotion of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for 75mm thick cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in sub base of hardstanding complete all as specified and directed.

M&L for 75mm thick cement concrete type B-2, 1:2:4 (40mm graded aggregate) as in flooring cement concrete surface even and fair without using extra cement complete all as specified and directed.

M&L for providing cement concrete type B1 1:2:4 (20mm graded aggregate) as in roof kerbs, rounded or chamfered on edge and copping complete all as specified and directed.

M&L for machine pressed precast cement concrete interlocking paver block of size confirming to IS-15658-2006 of 60 mm thickness, M-35 grade with grey cement and with pigment or without pigment including taking down old. Shape and size approved by GE.

M&L for providng 25mm thick sand crushioning under interlocking tiles complete all as specified and directed.

M&L for chequered cement concrete tiles 30cmx30cmx25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments and including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 complete all as specified and as directed

M&L for old size brickwork in subclass 'B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 including demolition of brickwork or stone/boulder masonry, built in cement mortar including all quions, arches, pillars etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed

M&L for brickwork with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick wall built in CM 1:4 including demolition complete all as specified and as directed.

M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces in cm 1:4 including taking down old finishes, complete all as specified and directed.

M&L Rendering 15mm thick on other than fair faces of brick work or concrete surfaces finish even and smooth (without using extra cement) in cm 1:6 including taking down old finishes, complete all as specified and directed.

Supply only liquid water proofing compound (ISI marked) complete all as specified and directed

Removing building materials etc. to a distance of 2.00Km, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls by brooming down or steel wire brushing, scraping down of lime scale, smoke soot, trading oil and greasy spots etc and applying one coat of cement base paint on old painted surface of wall complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coats of cement base paint over a coat of cement primer, complete all as specified and directed.

M&L for preparation of old decorated surfaces of wall by brooming down or steel wire brushing, scraping down of lime scale, smoke soot, trading oil and greasy spots etc and applying one coat of white wash complete all as specified and directed

M&L for preparation of old decorated surfaces of ceiling by brooming down or steel wire brushing, scraping down of lime scale, smoke soot, trading oil and greasy spots etc upto 15m height and applying one coat of white wash complete all as specified and directed

M&L for providing precast cement concrete type B1 1:2:4 (20mm graded aggregate) in landings, cover slabs, drain, chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:4 complete all as specified and directed.

S&F TMT mild steel bars, 6 mm to 8 mm dia and over, cut to length, bent to shape required, including cranking, beinding spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe 290(Gde E-165) complete all as specified and directed.

Taking and re-fixing only machine pressed precast concrete interlocking paver block of any shape and size conforming to IS-15658-2006 of 60mm thickness, M-35 grade with grey cement and no pigment complete all as specified and directed

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

M&L for providing cement concrete type B1 1:2:4 (20mm graded aggregate) as in roof kerbs, rounded or chamfered on edge and padding complete all as specified and directed

M&L for preparation of old wooden painted surfaces of any description not otherwise described over 10 cm width or girth including burning off or removing paint etc and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old steel painted surfaces of any description not otherwise described over 10 cm width or girth including burning off or removing paint etc and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surface of ceiling in cement mortar (1:4) in patch including dubbing coat complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not other wise provided for complete all as specified and directed.

S&F welded steel wire fabric n exc 4 kg to wood or steel members complete all as specified and directed.

M&L for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Excavating in post holes (or similar holes) in loose/soft soil each n exc 0.5 cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layer not exceeding 25 cm complete all as specified and directed.

M&L cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in foundation complete as all directed.

M&L for repair to broken chajjas with cement mortar 1:4 or cement concrete including necessary form work, dubbing coat, cutting of reinforcement and benching of juction of wall & chajja with PCC 1:2:4 type B0 complete all as specified and directed.

M&L for repair to broken roof projection with cement mortar 1:4 or cement concrete with PCC 1:2:4 type B0 including necessary form work, dubbing coat, cutting of reinforcement complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls by brooming down or steel wire brushing, scraping down of lime scale, smoke soot, trading oil and greasy spots etc upto 15m height and applying one coat of acrylic smooth exterior paint (shade already approved by GE (I) over base coat of tinned 1:1 water mix complete all as specified and directed.

M&L for preparation of old surfaces of walls by brooming down or steel wire brushing, scraping down of lime scale, smoke soot, trading oil and greasy spots etc and applying one coat of colour wash on old decorated surface of wall complete all as specified and directed.

Greasing oiling of old steel rolling shutters any type, including minor repair and replacement defected part (labour only) area n exc 6 sqm complete all as directected by EIC (Note: Major part shall be measured and paid separately)

Taking down chowkhats or frames exc 1.5 Sqm but not etc 4.00 Sqm each complete all as specified and directed.

M&L for 30mm flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides compete all as specified and directed.

M&L for preparation of new wooden surfaces of any description, over 10 cm width or girth and applying two coat of synthetic enamel paint (ordinary tint) over one coat of primer complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

M&L for point wiring complete with FR PVC insulated, unsheathed stranded copper conductor of nominal area 1.5 Sqmm, 1100 volts grade, along with one single run of same size and type of copper wire as continuous earth wire to common earth dolly in and including cutting/chasing on brick wall not exc. 10 cm girth (excluding ceiling surface for existing pipe) and supply and fixing concealed PVC conduit pipe medium grade of nominal size 20 mm dia along with connected fittings/junction boxes and sunken terminal boxes pressed MS/GI steel terminal boxes not less than 1.20 mm thick for mounting switch, socket etc including 3 mm thick plastic laminated sheet cover with brass screw and cup washers with all accessories and making good to disturbed surface with cement mortar ratio of 1:3 and matching surface with existing white/colour wash, oil bound or cement base paint etc to match with existing surface complete all as specified and directed and suitable for the following: -

One light point or one fan point controlled by one way, single pole switch

One 3 pin socket outlet, 6 Amp on “independent board”

All as per item No. 45 here in above but point wiring using 2.5 Sqmm (Nominal area) FR PVC insulated unsheathed copper conductor 1100 volts for one 3/6 pin socket outlet ,suitable for 6/16 amps on “independent board”.with 1.5 sqmm with one single run copper wire as continuous earth wire to common earth dolly complete.

Taking down copper/aluminium Sub main wiring of any size complete, including fixture and fittings and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

Wiring for circuit/ submain wiring alongwith earth wire with size 2 X 4 sq. mm + 1 X 4 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in recessed medium class PVC conduit as required.

Supply & Fixing switch piano flush button type, 6 Amp one way, 240 Volt, single pole , ISI marked conforming to IS 3854 complete all as specified and directed.

Supply and fix socket outlet 5 pin, 6 Amps, 230 volt flush type complete all as specified and as directed.

Supply & Fixing switch socket combination multipurpose 5 in 1, 6 pin, 6 and 16 Amp, 240 Volt AC, style duoble colour series" with cover plate complete all as specified and directed.

S & F in replacement of LED light fitting 1 x 20 watt,4' light luminaires in sleek and CRCA powder coated white housing look, aesthetic soft contoured injection moulded ABS caps, polycarbonate lamp holder complete with energy efficient LED on wall and making electrical connection with PVC insulated flexible copper wire, twin twisted of size 0.5 Sq mm not more than 0.50 m long complete all as specified and directed.

Supplying and fixing energy saving, IP66 environmental friendly, long life, exclusive innovative die-cast aluminium LED Building security light , 25 W suitable for highlighting architectural structure and general purpose lighting . including cable 1.5 sqmm 3 core copper conductor complete all as specified and directed.

Supplying and fixing energy saving, IP66 environmental friendly, long life, exclusive innovative die-cast aluminium LED Flood light with high power LEDs as light source,.60 W suitable for highlighting architectural structure and general purpose lighting . including cable 1.5 sqmm 3 core copper conductor complete all as specified and directed.

Supply & Fixing in replacement of SPN Distribution Box, double door of protection grade IP 43 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of 8 way, confirming to IS 13032 & 8623 complete all as specified and directed.

Supply & Fixing MCB SPN, 32 Amps 240 volts, AC , 10 KA breaking capacity 'C' Series,"ISI marked and conforming to IS 8828/IEC 60898-1 complete all as specified and directed.

Supply & Fixing MCB SP, 06 to 32 Amps 240 volts, AC , 10 KA breaking capacity 'C' Series,"ISI marked and conforming to IS 8828/IEC 60898-1 complete all as specified and directed.

U.R ASSOCIATES

KHURANA BUILDERS